summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-09-09net: mvpp2: restructure "link status" interrupt handlingRussell King
The "link status" interrupt is used for more than just link status. Restructure mvpp2_link_status_isr() so we can add additional handling. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09devlink: Introduce controller numberParav Pandit
A devlink port may be for a controller consist of PCI device. A devlink instance holds ports of two types of controllers. (1) controller discovered on same system where eswitch resides This is the case where PCI PF/VF of a controller and devlink eswitch instance both are located on a single system. (2) controller located on external host system. This is the case where a controller is located in one system and its devlink eswitch ports are located in a different system. When a devlink eswitch instance serves the devlink ports of both controllers together, PCI PF/VF numbers may overlap. Due to this a unique phys_port_name cannot be constructed. For example in below such system controller-0 and controller-1, each has PCI PF pf0 whose eswitch ports can be present in controller-0. These results in phys_port_name as "pf0" for both. Similar problem exists for VFs and upcoming Sub functions. An example view of two controller systems: --------------------------------------------------------- | | | --------- --------- ------- ------- | ----------- | | vf(s) | | sf(s) | |vf(s)| |sf(s)| | | server | | ------- ----/---- ---/----- ------- ---/--- ---/--- | | pci rc |=== | pf0 |______/________/ | pf1 |___/_______/ | | connect | | ------- ------- | ----------- | | controller_num=1 (no eswitch) | ------|-------------------------------------------------- (internal wire) | --------------------------------------------------------- | devlink eswitch ports and reps | | ----------------------------------------------------- | | |ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 |ctrl-0 | | | |pf0 | pf0vfN | pf0sfN | pf1 | pf1vfN |pf1sfN | | | ----------------------------------------------------- | | |ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 |ctrl-1 | | | |pf1 | pf1vfN | pf1sfN | pf1 | pf1vfN |pf0sfN | | | ----------------------------------------------------- | | | | | | --------- --------- ------- ------- | | | vf(s) | | sf(s) | |vf(s)| |sf(s)| | | ------- ----/---- ---/----- ------- ---/--- ---/--- | | | pf0 |______/________/ | pf1 |___/_______/ | | ------- ------- | | | | local controller_num=0 (eswitch) | --------------------------------------------------------- An example devlink port for external controller with controller number = 1 for a VF 1 of PF 0: $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf controller 1 pfnum 0 vfnum 1 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "ens2f0pf0vf1", "flavour": "pcivf", "controller": 1, "pfnum": 0, "vfnum": 1, "external": true, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09devlink: Introduce external controller flagParav Pandit
A devlink eswitch port may represent PCI PF/VF ports of a controller. A controller either located on same system or it can be an external controller located in host where such NIC is plugged in. Add the ability for driver to specify if a port is for external controller. Use such flag in the mlx5_core driver. An example of an external controller having VF1 of PF0 belong to controller 1. $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf pfnum 0 vfnum 1 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "ens2f0pf0vf1", "flavour": "pcivf", "pfnum": 0, "vfnum": 1, "external": true, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net/mlx5: E-switch, Read controller number from deviceParav Pandit
ECPF supports one external host controller. Read controller number from the device. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: stmmac: dwmac-intel-plat: remove redundant null check before ↵Zhang Changzhong
clk_disable_unprepare() Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: pxa168_eth: remove redundant null check before clk_disable_unprepare()Zhang Changzhong
Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: phy: smsc: LAN8710/20: remove PHY_RST_AFTER_CLK_EN flagMarco Felsch
Don't reset the phy without respect to the PHY library state machine because this breaks the phy IRQ mode. The same behaviour can be archived now by specifying the refclk. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: phy: smsc: LAN8710/20: add phy refclk in supportMarco Felsch
Add support to specify the clock provider for the PHY refclk and don't rely on 'magic' host clock setup. [1] tried to address this by introducing a flag and fixing the corresponding host. But this commit breaks the IRQ support since the irq setup during .config_intr() is thrown away because the reset comes from the side without respecting the current PHY state within the PHY library state machine. Furthermore the commit fixed the problem only for FEC based hosts other hosts acting like the FEC are not covered. This commit goes the other way around to address the bug fixed by [1]. Instead of resetting the device from the side every time the refclk gets (re-)enabled it requests and enables the clock till the device gets removed. Now the PHY library is the only place where the PHY gets reset to respect the PHY library state machine. [1] commit 7f64e5b18ebb ("net: phy: smsc: LAN8710/20: add PHY_RST_AFTER_CLK_EN flag") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: phy: smsc: simplify config_init callbackMarco Felsch
Exit the driver specific config_init hook early if energy detection is disabled. We can do this because we don't need to clear the interrupt status here. Clearing the status should be removed anyway since this is handled by the phy_enable_interrupts(). Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: phy: smsc: skip ENERGYON interrupt if disabledMarco Felsch
Don't enable the interrupt if the platform disable the energy detection by "smsc,disable-energy-detect". Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: cavium: Fix a bunch of kerneldoc parameter issuesWang Hai
Rename ptp to ptp_info. Fix W=1 compile warnings (invalid kerneldoc): drivers/net/ethernet/cavium/common/cavium_ptp.c:94: warning: Excess function parameter 'ptp' description in 'cavium_ptp_adjfine' drivers/net/ethernet/cavium/common/cavium_ptp.c:141: warning: Excess function parameter 'ptp' description in 'cavium_ptp_adjtime' drivers/net/ethernet/cavium/common/cavium_ptp.c:163: warning: Excess function parameter 'ptp' description in 'cavium_ptp_gettime' drivers/net/ethernet/cavium/common/cavium_ptp.c:185: warning: Excess function parameter 'ptp' description in 'cavium_ptp_settime' drivers/net/ethernet/cavium/common/cavium_ptp.c:208: warning: Excess function parameter 'ptp' description in 'cavium_ptp_enable' Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09Merge tag 'wireless-drivers-2020-09-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.9 First set of fixes for v5.9, small but important. brcmfmac * fix a throughput regression on bcm4329 mt76 * fix a regression with stations reconnecting on mt7616 * properly free tx skbs, it was working by accident before mwifiex * fix a regression with 256 bit encryption keys wlcore * revert AES CMAC support as it caused a regression ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09wireguard: peerlookup: take lock before checking hash in replace operationJason A. Donenfeld
Eric's suggested fix for the previous commit's mentioned race condition was to simply take the table->lock in wg_index_hashtable_replace(). The table->lock of the hash table is supposed to protect the bucket heads, not the entires, but actually, since all the mutator functions are already taking it, it makes sense to take it too for the test to hlist_unhashed, as a defense in depth measure, so that it no longer races with deletions, regardless of what other locks are protecting individual entries. This is sensible from a performance perspective because, as Eric pointed out, the case of being unhashed is already the unlikely case, so this won't add common contention. And comparing instructions, this basically doesn't make much of a difference other than pushing and popping %r13, used by the new `bool ret`. More generally, I like the idea of locking consistency across table mutator functions, and this might let me rest slightly easier at night. Suggested-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/wireguard/20200908145911.4090480-1-edumazet@google.com/ Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09wireguard: noise: take lock when removing handshake entry from tableJason A. Donenfeld
Eric reported that syzkaller found a race of this variety: CPU 1 CPU 2 -------------------------------------------|--------------------------------------- wg_index_hashtable_replace(old, ...) | if (hlist_unhashed(&old->index_hash)) | | wg_index_hashtable_remove(old) | hlist_del_init_rcu(&old->index_hash) | old->index_hash.pprev = NULL hlist_replace_rcu(&old->index_hash, ...) | *old->index_hash.pprev | Syzbot wasn't actually able to reproduce this more than once or create a reproducer, because the race window between checking "hlist_unhashed" and calling "hlist_replace_rcu" is just so small. Adding an mdelay(5) or similar there helps make this demonstrable using this simple script: #!/bin/bash set -ex trap 'kill $pid1; kill $pid2; ip link del wg0; ip link del wg1' EXIT ip link add wg0 type wireguard ip link add wg1 type wireguard wg set wg0 private-key <(wg genkey) listen-port 9999 wg set wg1 private-key <(wg genkey) peer $(wg show wg0 public-key) endpoint 127.0.0.1:9999 persistent-keepalive 1 wg set wg0 peer $(wg show wg1 public-key) ip link set wg0 up yes link set wg1 up | ip -force -batch - & pid1=$! yes link set wg1 down | ip -force -batch - & pid2=$! wait The fundumental underlying problem is that we permit calls to wg_index_ hashtable_remove(handshake.entry) without requiring the caller to take the handshake mutex that is intended to protect members of handshake during mutations. This is consistently the case with calls to wg_index_ hashtable_insert(handshake.entry) and wg_index_hashtable_replace( handshake.entry), but it's missing from a pertinent callsite of wg_ index_hashtable_remove(handshake.entry). So, this patch makes sure that mutex is taken. The original code was a little bit funky though, in the form of: remove(handshake.entry) lock(), memzero(handshake.some_members), unlock() remove(handshake.entry) The original intention of that double removal pattern outside the lock appears to be some attempt to prevent insertions that might happen while locks are dropped during expensive crypto operations, but actually, all callers of wg_index_hashtable_insert(handshake.entry) take the write lock and then explicitly check handshake.state, as they should, which the aforementioned memzero clears, which means an insertion should already be impossible. And regardless, the original intention was necessarily racy, since it wasn't guaranteed that something else would run after the unlock() instead of after the remove(). So, from a soundness perspective, it seems positive to remove what looks like a hack at best. The crash from both syzbot and from the script above is as follows: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 7395 Comm: kworker/0:3 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: wg-kex-wg1 wg_packet_handshake_receive_worker RIP: 0010:hlist_replace_rcu include/linux/rculist.h:505 [inline] RIP: 0010:wg_index_hashtable_replace+0x176/0x330 drivers/net/wireguard/peerlookup.c:174 Code: 00 fc ff df 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 44 01 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 10 48 89 c6 48 c1 ee 03 <80> 3c 0e 00 0f 85 06 01 00 00 48 85 d2 4c 89 28 74 47 e8 a3 4f b5 RSP: 0018:ffffc90006a97bf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888050ffc4f8 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88808e04e010 RBP: ffff88808e04e000 R08: 0000000000000001 R09: ffff8880543d0000 R10: ffffed100a87a000 R11: 000000000000016e R12: ffff8880543d0000 R13: ffff88808e04e008 R14: ffff888050ffc508 R15: ffff888050ffc500 FS: 0000000000000000(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f5505db0 CR3: 0000000097cf7000 CR4: 00000000001526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: wg_noise_handshake_begin_session+0x752/0xc9a drivers/net/wireguard/noise.c:820 wg_receive_handshake_packet drivers/net/wireguard/receive.c:183 [inline] wg_packet_handshake_receive_worker+0x33b/0x730 drivers/net/wireguard/receive.c:220 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/wireguard/20200908145911.4090480-1-edumazet@google.com/ Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09cxgb4/ch_ipsec: Registering xfrmdev_ops with cxgb4Ayush Sawal
As ch_ipsec was removed without clearing xfrmdev_ops and netdev feature(esp-hw-offload). When a recalculation of netdev feature is triggered by changing tls feature(tls-hw-tx-offload) from user request, it causes a page fault due to absence of valid xfrmdev_ops. Fixes: 6dad4e8ab3ec ("chcr: Add support for Inline IPSec") Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: dsa: microchip: Implement recommended reset timingPaul Barker
The datasheet for the ksz9893 and ksz9477 switches recommend waiting at least 100us after the de-assertion of reset before trying to program the device through any interface. Also switch the existing msleep() call to usleep_range() as recommended in Documentation/timers/timers-howto.rst. The 2ms range used here is somewhat arbitrary, as long as the reset is asserted for at least 10ms we should be ok. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: dsa: microchip: Disable RGMII in-band status on KSZ9893Paul Barker
We can't assume that the link partner supports the in-band status reporting which is enabled by default on the KSZ9893 when using RGMII for the upstream port. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: dsa: microchip: Improve phy mode messagePaul Barker
Always print the selected phy mode for the CPU port when using the ksz9477 driver. If the phy mode was changed, also print the previous mode to aid in debugging. To make the message more clear, prefix it with the port number which it applies to and improve the language a little. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: dsa: microchip: Make switch detection more informativePaul Barker
To make switch detection more informative print the result of the ksz9477/ksz9893 compatibility check. With debug output enabled also print the contents of the Chip ID registers as a 40-bit hex string. As this detection is the first communication with the switch performed by the driver, making it easy to see any errors here will help identify issues with SPI data corruption or reset sequencing. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09rtlwifi: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. The only file where some GFP_ flags are updated is 'pci.c'. When memory is allocated in '_rtl_pci_init_tx_ring()' and '_rtl_pci_init_rx_ring()' GFP_KERNEL can be used because both functions are called from a probe function and no spinlock is taken. The call chain is: rtl_pci_probe --> rtl_pci_init --> _rtl_pci_init_trx_ring --> _rtl_pci_init_rx_ring --> _rtl_pci_init_tx_ring @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200907193828.318233-1-christophe.jaillet@wanadoo.fr
2020-09-09brcmsmac: fix memory leak in wlc_phy_attach_lcnphyKeita Suzuki
When wlc_phy_txpwr_srom_read_lcnphy fails in wlc_phy_attach_lcnphy, the allocated pi->u.pi_lcnphy is leaked, since struct brcms_phy will be freed in the caller function. Fix this by calling wlc_phy_detach_lcnphy in the error handler of wlc_phy_txpwr_srom_read_lcnphy before returning. Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200908121743.23108-1-keitasuzuki.park@sslab.ics.keio.ac.jp
2020-09-09mwifiex: remove function pointer checkTom Rix
clang static analyzer reports this problem init.c:739:8: warning: Called function pointer is null (null dereference) ret = adapter->if_ops.check_fw_status( ... ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In mwifiex_dnld_fw, there is an earlier check for check_fw_status(), The check was introduced for usb support at the same time this check in _mwifiex_fw_dpc() was made if (adapter->if_ops.dnld_fw) { ret = adapter->if_ops.dnld_fw(adapter, &fw); } else { ret = mwifiex_dnld_fw(adapter, &fw); } And a dnld_fw function initialized as part the usb's mwifiex_if_ops. The other instances of mwifiex_if_ops for pci and sdio both set check_fw_status. So the first check is not needed and can be removed. Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200906200548.18053-1-trix@redhat.com
2020-09-09rtl8xxxu: prevent potential memory leakChris Chiu
Free the skb if usb_submit_urb fails on rx_urb. And free the urb no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200906040424.22022-1-chiu@endlessm.com
2020-09-09rtlwifi: rtl8723ae: Delete a stray tabDan Carpenter
This line is indented too far. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200905124758.GB183976@mwanda
2020-09-09ath11k: Add peer max mpdu parameter in peer assoc commandTamizh Chelvam
Add peer max mpdu length configuration support in peer_assoc_he parameters. Noticed low throughput for the STA which supports HE, HT and not VHT in MU-MIMO case without this configuration Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588611900-21185-2-git-send-email-tamizhr@codeaurora.org
2020-09-09ath11k: fix uninitialized return in ath11k_spectral_process_data()Dan Carpenter
There is a success path where "ret" isn't initialized where we never have a ATH11K_SPECTRAL_TAG_SCAN_SEARCH and then ret isn't initialized. Fixes: 9d11b7bff950 ("ath11k: add support for spectral scan") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200619142922.GA267142@mwanda
2020-09-08net: ethernet/neterion/vxge: fix spelling of "functionality"Randy Dunlap
Fix typo/spello of "functionality". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: tc35815: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'tc35815_init_queues()' GFP_ATOMIC must be used because it can be called from 'tc35815_restart()' where some spinlock are taken. The call chain is: tc35815_restart --> tc35815_clear_queues --> tc35815_init_queues @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08hippi: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'rr_init_one()' GFP_KERNEL can be used because it is a probe function and no spinlock is taken in the between. When memory is allocated in 'rr_open()' GFP_KERNEL can be used because it is a '.ndo_open' function (see struct net_device_ops) and no spinlock is taken in the between. '.ndo_open' functions are synchronized using the rtnl_lock() semaphore. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08sfc: coding style cleanups in mcdi_port_common.cEdward Cree
The code recently moved into this file contained a number of coding style issues, about which checkpatch and xmastree complained. Fix them. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08Merge tag 'ieee802154-for-davem-2020-09-08' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2020-09-08 An update from ieee802154 for your *net* tree. A potential memory leak fix for ca8210 from Liu Jian, a check on the return for a register read in adf7242 and finally a user after free fix in the softmac tx function from Eric found by syzkaller. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: wimax: i2400m: fix 'msg_skb' kernel-doc warning in i2400m_msg_to_dev()Wang Hai
Fixes the following W=1 kernel build warning(s): drivers/net/wimax/i2400m/control.c:709: warning: Excess function parameter 'msg_skb' description in 'i2400m_msg_to_dev' This parameter is not in use. Remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08bnx2x: Fix some kernel-doc warningsWang Hai
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:4238: warning: Excess function parameter 'netdev' description in 'bnx2x_setup_tc' drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:4238: warning: Excess function parameter 'tc' description in 'bnx2x_setup_tc' Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: smsc911x: Remove unused variablesWei Xu
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/smsc/smsc911x.c: In function ‘smsc911x_rx_fastforward’: drivers/net/ethernet/smsc/smsc911x.c:1199:16: warning: variable ‘temp’ set but not used [-Wunused-but-set-variable] drivers/net/ethernet/smsc/smsc911x.c: In function ‘smsc911x_eeprom_write_location’: drivers/net/ethernet/smsc/smsc911x.c:2058:6: warning: variable ‘temp’ set but not used [-Wunused-but-set-variable] Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: hns3: remove some unused function hns3_update_promisc_mode()Guojia Liao
hns3_update_promisc_mode is defined, but not be used, so remove it. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: hns3: remove some unused macros related to queueHuazhong Tan
There are several macros related queue defined, but never used, so remove them. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: hns3: remove unused field 'tc_num_last_time' in struct hclge_devHuazhong Tan
'tc_num_last_time' is defined, but never used, so remove it. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: hns3: remove unused field 'io_base' in struct hns3_enet_ringHuazhong Tan
'io_base' has been defined and initialized, but never used, so remove it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: hns3: fix a typo in struct hclge_macGuangbin Huang
The member link of struct hclge_mac stores the link status of MAC and PHY if PHY exists, but its annotation uses word "exit", so fix it. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: hns3: skip periodic service task if reset failedGuangbin Huang
When reset fails, if there are some pending jobs for the periodic service task, it does not do anything except print error each time the task is scheduled. So skip the periodic service task if reset failed. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: hns3: narrow two local variable range in hclgevf_reset_prepare_wait()Huazhong Tan
Since variable send_msg and ret only used in if branch, so move their definition into the if branch. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08ath11k: fix a double free and a memory leakTom Rix
clang static analyzer reports this problem mac.c:6204:2: warning: Attempt to free released memory kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The channels pointer is allocated in ath11k_mac_setup_channels_rates() When it fails midway, it cleans up the memory it has already allocated. So the error handling needs to skip freeing the memory. There is a second problem. ath11k_mac_setup_channels_rates(), allocates 3 channels. err_free misses releasing ar->mac.sbands[NL80211_BAND_6GHZ].channels Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200906212625.17059-1-trix@redhat.com
2020-09-08ath10k: Add support for chain1 regulator supply votingRakesh Pillai
Add support to vote for chain-1 voltage regulator in WCN3990. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1593194502-13164-3-git-send-email-pillair@codeaurora.org
2020-09-07hv_netvsc: Fix hibernation for mlx5 VF driverDexuan Cui
mlx5_suspend()/resume() keep the network interface, so during hibernation netvsc_unregister_vf() and netvsc_register_vf() are not called, and hence netvsc_resume() should call netvsc_vf_changed() to switch the data path back to the VF after hibernation. Note: after we close and re-open the vmbus channel of the netvsc NIC in netvsc_suspend() and netvsc_resume(), the data path is implicitly switched to the netvsc NIC. Similarly, netvsc_suspend() should not call netvsc_unregister_vf(), otherwise the VF can no longer be used after hibernation. For mlx4, since the VF network interafce is explicitly destroyed and re-created during hibernation (see mlx4_suspend()/resume()), hv_netvsc already explicitly switches the data path from and to the VF automatically via netvsc_register_vf() and netvsc_unregister_vf(), so mlx4 doesn't need this fix. Note: mlx4 can still work with the fix because in netvsc_suspend()/resume() ndev_ctx->vf_netdev is NULL for mlx4. Fixes: 0efeea5fb153 ("hv_netvsc: Add the support of hibernation") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-07sfc: simplify DMA mask settingEdward Cree
Christoph says[1] that dma_set_mask_and_coherent() is smart enough to truncate the mask itself if it's too long. So we can get rid of our "lop off one bit and retry" loop in efx_init_io(). [1]: https://www.spinics.net/lists/netdev/msg677266.html Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-07sfc: remove EFX_DRIVER_VERSIONEdward Cree
Per-module versions for in-tree drivers are deprecated. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-07sfc: handle limited FEC supportEdward Cree
If the reported PHY capabilities do not include a given FEC mode, don't attempt to select that FEC mode anyway. If the user tries to set a mode through ethtool that is not supported, return an error. The _REQUESTED bits don't appear in the supported caps, but are implied by the corresponding FEC bits. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-07sfc: add ethtool ops and miscellaneous ndos to EF100Edward Cree
Mostly just calls to existing common functions. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-07sfc: remove phy_op indirectionEdward Cree
Originally there were several implementations of PHY operations for the several different PHYs used on Falcon boards. But Falcon is now in a separate driver, and all sfc NICs since then have had MCDI-managed PHYs. Thus, there is no need to indirect through function pointers in efx->phy_op; we can simply call the efx_mcdi_phy_* functions directly. This also hooks up these functions for EF100, which was previously using the dummy_phy_ops. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-07sfc: don't double-down() filters in ef100_reset()Edward Cree
dev_close(), by way of ef100_net_stop(), already brings down the filter table, so there's no need to do it again (which just causes lots of WARN_ONs). Similarly, don't bring it up ourselves, as dev_open() -> ef100_net_open() will do it, and will fail if it's already been brought up. Fixes: a9dc3d5612ce ("sfc_ef100: RX filter table management and related gubbins") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-17 02:58:06 +0000