summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-09-27mlxsw: core: Add an infrastructure to track transceiver overheat counterAmit Cohen
Initialize an array that stores per-module overheat state and a counter indicating how many times the module was in overheat state. Export a function to query the counter according to module number. Will be used later on by the switch driver (i.e., mlxsw_spectrum) to expose module's overheat counter as part of ethtool statistics. Initialize mlxsw_env after driver initialization to be able to query number of modules from MGPIR register. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: core_hwmon: Query MTMP before writing to set only relevant fieldsAmit Cohen
The MTMP register controls various temperature settings on a per-sensor basis. Subsequent patches are going to alter some of these settings for sensors found on port modules in response to certain events. In order to prevent the current callers that write to MTMP from overriding these settings, have them first query the register and then change only the relevant register fields. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: reg: Add Ports Module Administrative and Operational Status RegisterAmit Cohen
PMAOS register configures and retrieves the per module status. The register is used also for enabling event for status change. It will be used to enable PMPE (Port Module Plug/Unplug) event. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: reg: Add Port Module Plug/Unplug Event RegisterAmit Cohen
PMPE register reports any operational status change of a module. It will be used for enabling temperature warning event when a module is plugged in. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: reg: Add Management Temperature Warning Event RegisterAmit Cohen
Add MTWE (Management Temperature Warning Event) register, which is used for over temperature warning. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: add a structure for IR shaper's parameter in hclge_shaper_para_calc()Huazhong Tan
As function hclge_shaper_para_calc() has too many arguments to add more, so encapsulate its three arguments ir_b, ir_u, ir_s into a structure. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: add a check for device specifications queried from firmwareGuangbin Huang
The device specifications querying is unsupported by the old firmware, in this case, these specifications are 0. However, some specifications should not be 0 or will cause problem. So after querying from firmware, some device specifications are needed to check their value and set to default value if their values are 0. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: replace the macro of max tm rate with the queried specificationGuangbin Huang
The max tm rate is a fixed value(100Gb/s) now as it is defined by a macro. In order to support other rates in different kinds of device, it is better to use specification queried from firmware to replace this macro. As function hclge_shaper_para_calc() has too many arguments to add more, so encapsulate its three arguments ir_b, ir_u, ir_s into a structure. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: add support to query device specificationsGuangbin Huang
To improve code maintainability and compatibility, new commands HCLGE_OPC_QUERY_DEV_SPECS for PF and HCLGEVF_OPC_QUERY_DEV_SPECS for VF are introduced to query device specifications, instead of statically defining specifications by checking the hardware version or other methods. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: add debugfs to dump device capabilitiesGuangbin Huang
Adds debugfs to dump each device capability whether is supported. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: use capabilities queried from firmwareGuangbin Huang
In order to improve code maintainability and compatibility, the capabilities of new features are queried from firmware. The member flag in struct hnae3_ae_dev indicates not only capabilities, but some initialized status. As capabilities bits queried from firmware is too many, it is better to use new member to indicate them. So adds member capabs in struce hnae3_ae_dev. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: use capability flag to indicate FECGuangbin Huang
Currently, the revision of the pci device is used to identify whether FEC is supported, which is not good for maintainability and compatibility. So use a capability flag to do that. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: add support to query device capabilityGuangbin Huang
In order to improve code maintainability and compatibility, add support to query the device capability by expanding the existing version query command. The device capability refers to the features supported by the device. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: delete redundant PCI revision judgementGuangbin Huang
Fibre device of PCI revision 0x20 don't support autoneg, and the ops get_autoneg() return AUTONEG_DISABLE so function hns3_nway_reset() will return earlier than judging PCI revision. Function hclge_handle_rocee_ras_error() don't need to judge PCI revision again because its caller hclge_handle_hw_ras_error() has judged once. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: add device version to replace pci revisionGuangbin Huang
To better identify the device version, struct hnae3_handle adds a member dev_version to replace pci revision. The dev_version consists of hardware version and PCI revision. The hardware version is queried from firmware by an existing firmware version query command. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: spectrum_acl: Fix mlxsw_sp_acl_tcam_group_add()'s error pathIdo Schimmel
If mlxsw_sp_acl_tcam_group_id_get() fails, the mutex initialized earlier is not destroyed. Fix this by initializing the mutex after calling the function. This is symmetric to mlxsw_sp_acl_tcam_group_del(). Fixes: 5ec2ee28d27b ("mlxsw: spectrum_acl: Introduce a mutex to guard region list updates") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mdio: fix mdio-thunder.c dependency & build errorRandy Dunlap
Fix build error by selecting MDIO_DEVRES for MDIO_THUNDER. Fixes this build error: ld: drivers/net/phy/mdio-thunder.o: in function `thunder_mdiobus_pci_probe': drivers/net/phy/mdio-thunder.c:78: undefined reference to `devm_mdiobus_alloc_size' Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: netdev@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26netdevsim: fix duplicated debugfs directoryJakub Kicinski
The "ethtool" debugfs directory holds per-netdev knobs, so move it from the device instance directory to the port directory. This fixes the following warning when creating multiple ports: debugfs: Directory 'ethtool' with parent 'netdevsim1' already present! Fixes: ff1f7c17fb20 ("netdevsim: add pause frame stats") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26net: dsa: tag_ocelot: use a short prefix on both ingress and egressVladimir Oltean
There are 2 goals that we follow: - Reduce the header size - Make the header size equal between RX and TX The issue that required long prefix on RX was the fact that the ocelot DSA tag, being put before Ethernet as it is, would overlap with the area that a DSA master uses for RX filtering (destination MAC address mainly). Now that we can ask DSA to put the master in promiscuous mode, in theory we could remove the prefix altogether and call it a day, but it looks like we can't. Using no prefix on ingress, some packets (such as ICMP) would be received, while others (such as PTP) would not be received. This is because the DSA master we use (enetc) triggers parse errors ("MAC rx frame errors") presumably because it sees Ethernet frames with a bad length. And indeed, when using no prefix, the EtherType (bytes 12-13 of the frame, bits 96-111) falls over the REW_VAL field from the extraction header, aka the PTP timestamp. When turning the short (32-bit) prefix on, the EtherType overlaps with bits 64-79 of the extraction header, which are a reserved area transmitted as zero by the switch. The packets are not dropped by the DSA master with a short prefix. Actually, the frames look like this in tcpdump (below is a PTP frame, with an extra dsa_8021q tag - dadb 0482 - added by a downstream sja1105). 89:0c:a9:f2:01:00 > 88:80:00:0a:00:1d, 802.3, length 0: LLC, \ dsap Unknown (0x10) Individual, ssap ProWay NM (0x0e) Response, \ ctrl 0x0004: Information, send seq 2, rcv seq 0, \ Flags [Response], length 78 0x0000: 8880 000a 001d 890c a9f2 0100 0000 100f ................ 0x0010: 0400 0000 0180 c200 000e 001f 7b63 0248 ............{c.H 0x0020: dadb 0482 88f7 1202 0036 0000 0000 0000 .........6...... 0x0030: 0000 0000 0000 0000 0000 001f 7bff fe63 ............{..c 0x0040: 0248 0001 1f81 0500 0000 0000 0000 0000 .H.............. 0x0050: 0000 0000 0000 0000 0000 0000 ............ So the short prefix is our new default: we've shortened our RX frames by 12 octets, increased TX by 4, and headers are now equal between RX and TX. Note that we still need promiscuous mode for the DSA master to not drop it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26net: mscc: ocelot: move NPI port configuration to DSAVladimir Oltean
Remove the ocelot_configure_cpu() function, which was in fact bringing up 2 ports: the CPU port module, which both switchdev and DSA have, and the NPI port, which only DSA has. The (non-Ethernet) CPU port module is at a fixed index in the analyzer, whereas the NPI port is selected through the "ethernet" property in the device tree. Therefore, the function to set up an NPI port is DSA-specific, so we move it there, simplifying the ocelot switch library a little bit. Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: UNGLinuxDriver <UNGLinuxDriver@microchip.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26Revert "vxlan: move encapsulation warning"Jakub Kicinski
This reverts commit 546c044c9651e81a16833806feff6b369bb5de33. Nothing prevents user from sending frames to "external" VxLAN devices. In fact kernel itself may generate icmp chatter. This is fine, such frames should be dropped. The point of the "missing encapsulation" warning was that frames with missing encap should not make it into vxlan_xmit_one(). And vxlan_xmit() drops them cleanly, so let it just do that. Without this revert the warning is triggered by the udp_tunnel_nic.sh test, but the minimal repro is: $ ip link add vxlan0 type vxlan \ group 239.1.1.1 \ dev lo \ dstport 1234 \ external $ ip li set dev vxlan0 up [ 419.165981] vxlan0: Missing encapsulation instructions [ 419.166551] WARNING: CPU: 0 PID: 1041 at drivers/net/vxlan.c:2889 vxlan_xmit+0x15c0/0x1fc0 [vxlan] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25ice: add support for flash update overwrite maskJacob Keller
Support the recently added DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK parameter in the ice flash update handler. Convert the overwrite mask bitfield into the appropriate preservation level used by the firmware when updating. Because there is no equivalent preservation level for overwriting only identifiers, this combination is rejected by the driver as not supported with an appropriate extended ACK message. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25netdevsim: add support for flash_update overwrite maskJacob Keller
The devlink interface recently gained support for a new "overwrite mask" parameter that allows specifying how various sub-sections of a flash component are modified when updating. Add support for this to netdevsim, to enable easily testing the interface. Make the allowed overwrite mask values controllable via a debugfs parameter. This enables testing a flow where the driver rejects an unsupportable overwrite mask. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25devlink: convert flash_update to use params structureJacob Keller
The devlink core recently gained support for checking whether the driver supports a flash_update parameter, via `supported_flash_update_params`. However, parameters are specified as function arguments. Adding a new parameter still requires modifying the signature of the .flash_update callback in all drivers. Convert the .flash_update function to take a new `struct devlink_flash_update_params` instead. By using this structure, and the `supported_flash_update_params` bit field, a new parameter to flash_update can be added without requiring modification to existing drivers. As before, all parameters except file_name will require driver opt-in. Because file_name is a necessary field to for the flash_update to make sense, no "SUPPORTED" bitflag is provided and it is always considered valid. All future additional parameters will require a new bit in the supported_flash_update_params bitfield. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Bin Luo <luobin9@huawei.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Ido Schimmel <idosch@mellanox.com> Cc: Danielle Ratson <danieller@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25devlink: check flash_update parameter support in net coreJacob Keller
When implementing .flash_update, drivers which do not support per-component update are manually checking the component parameter to verify that it is NULL. Without this check, the driver might accept an update request with a component specified even though it will not honor such a request. Instead of having each driver check this, move the logic into net/core/devlink.c, and use a new `supported_flash_update_params` field in the devlink_ops. Drivers which will support per-component update must now specify this by setting DEVLINK_SUPPORT_FLASH_UPDATE_COMPONENT in the supported_flash_update_params in their devlink_ops. This helps ensure that drivers do not forget to check for a NULL component if they do not support per-component update. This also enables a slightly better error message by enabling the core stack to set the netlink bad attribute message to indicate precisely the unsupported attribute in the message. Going forward, any new additional parameter to flash update will require a bit in the supported_flash_update_params bitfield. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Bin Luo <luobin9@huawei.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Ido Schimmel <idosch@mellanox.com> Cc: Danielle Ratson <danieller@mellanox.com> Cc: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: atlantic: fix build when object tree is separateIgor Russkikh
Driver subfolder files refer parent folder includes in an absolute manner. Makefile contains a -I for this, but apparently that does not work if object tree is separated. Adding srctree to fix that. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25dpaa2-mac: Fix potential null pointer dereferenceGustavo A. R. Silva
There is a null-check for _pcs_, but it is being dereferenced prior to this null-check. So, if _pcs_ can actually be null, then there is a potential null pointer dereference that should be fixed by null-checking _pcs_ before being dereferenced. Addresses-Coverity-ID: 1497159 ("Dereference before null check") Fixes: 94ae899b2096 ("dpaa2-mac: add PCS support through the Lynx module") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25dpaa2-eth: install a single steering rule when SHARED_FS is enabledIonut-robert Aron
When SHARED_FS is enabled on a DPNI object the flow steering tables are shared between all the traffic classes. Modify the driver so that we only add a new flow steering entry on the TC#0 when this new option is enabled. Signed-off-by: Ionut-robert Aron <ionut-robert.aron@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25dpaa2-eth: no need to check link state right after ndo_openIoana Ciornei
The call to dpaa2_eth_link_state_update() is a leftover from the time when on DPAA2 platforms the PHYs were started at boot time so when an ifconfig was issued on the associated interface, the link status needed to be checked directly from the ndo_open() callback. This is not needed anymore since we are now properly integrated with the PHY layer thus a link interrupt will come directly from the PHY eventually without the need to call the sync function. Fix this up by removing the call to dpaa2_eth_link_state_update(). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25dpaa2-mac: do not check for both child and parent DTS nodesIoana Ciornei
There is no need to check if both the MDIO controller node and its child node, the PCS device, are available since there is no chance that the child node would be enabled when the parent it's not. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25dpaa2-eth: fix command version for Tx shapingIoana Ciornei
When adding the support for TBF offload, the improper command version was added even though the command format is for the V2 of dpni_set_tx_shaping(). This does not affect the functionality of TBF since the only change between these two versions is the addition of the exceeded parameters which are not used in TBF. Still, fix the bug so that we keep things in sync. Fixes: 39344a89623d ("dpaa2-eth: add API for Tx shaping") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: usb: ax88179_178a: add Toshiba usb 3.0 adapterWilken Gottwalt
Adds the driver_info and usb ids of the AX88179 based Toshiba USB 3.0 ethernet adapter. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25team: set dev->needed_headroom in team_setup_by_port()Eric Dumazet
Some devices set needed_headroom. If we ignore it, we might end up crashing in various skb_push() for example in ipgre_header() since some layers assume enough headroom has been reserved. Fixes: 1d76efe1577b ("team: add support for non-ethernet devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25bonding: set dev->needed_headroom in bond_setup_by_slave()Eric Dumazet
syzbot managed to crash a host by creating a bond with a GRE device. For non Ethernet device, bonding calls bond_setup_by_slave() instead of ether_setup(), and unfortunately dev->needed_headroom was not copied from the new added member. [ 171.243095] skbuff: skb_under_panic: text:ffffffffa184b9ea len:116 put:20 head:ffff883f84012dc0 data:ffff883f84012dbc tail:0x70 end:0xd00 dev:bond0 [ 171.243111] ------------[ cut here ]------------ [ 171.243112] kernel BUG at net/core/skbuff.c:112! [ 171.243117] invalid opcode: 0000 [#1] SMP KASAN PTI [ 171.243469] gsmi: Log Shutdown Reason 0x03 [ 171.243505] Call Trace: [ 171.243506] <IRQ> [ 171.243512] [<ffffffffa171be59>] skb_push+0x49/0x50 [ 171.243516] [<ffffffffa184b9ea>] ipgre_header+0x2a/0xf0 [ 171.243520] [<ffffffffa17452d7>] neigh_connected_output+0xb7/0x100 [ 171.243524] [<ffffffffa186f1d3>] ip6_finish_output2+0x383/0x490 [ 171.243528] [<ffffffffa186ede2>] __ip6_finish_output+0xa2/0x110 [ 171.243531] [<ffffffffa186acbc>] ip6_finish_output+0x2c/0xa0 [ 171.243534] [<ffffffffa186abe9>] ip6_output+0x69/0x110 [ 171.243537] [<ffffffffa186ac90>] ? ip6_output+0x110/0x110 [ 171.243541] [<ffffffffa189d952>] mld_sendpack+0x1b2/0x2d0 [ 171.243544] [<ffffffffa189d290>] ? mld_send_report+0xf0/0xf0 [ 171.243548] [<ffffffffa189c797>] mld_ifc_timer_expire+0x2d7/0x3b0 [ 171.243551] [<ffffffffa189c4c0>] ? mld_gq_timer_expire+0x50/0x50 [ 171.243556] [<ffffffffa0fea270>] call_timer_fn+0x30/0x130 [ 171.243559] [<ffffffffa0fea17c>] expire_timers+0x4c/0x110 [ 171.243563] [<ffffffffa0fea0e3>] __run_timers+0x213/0x260 [ 171.243566] [<ffffffffa0fecb7d>] ? ktime_get+0x3d/0xa0 [ 171.243570] [<ffffffffa0ff9c4e>] ? clockevents_program_event+0x7e/0xe0 [ 171.243574] [<ffffffffa0f7e5d5>] ? sched_clock_cpu+0x15/0x190 [ 171.243577] [<ffffffffa0fe973d>] run_timer_softirq+0x1d/0x40 [ 171.243581] [<ffffffffa1c00152>] __do_softirq+0x152/0x2f0 [ 171.243585] [<ffffffffa0f44e1f>] irq_exit+0x9f/0xb0 [ 171.243588] [<ffffffffa1a02e1d>] smp_apic_timer_interrupt+0xfd/0x1a0 [ 171.243591] [<ffffffffa1a01ea6>] apic_timer_interrupt+0x86/0x90 Fixes: f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25vxlan: fix vxlan_find_sock() documentation for l3mdevFabian Frederick
Since commit aab8cc3630e32 ("vxlan: add support for underlay in non-default VRF") vxlan_find_sock() also checks if socket is assigned to the right level 3 master device when lower device is not in the default VRF. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25vxlan: check rtnl_configure_link return code correctlyFabian Frederick
rtnl_configure_link is always checked if < 0 for error code. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25vxlan: move encapsulation warningFabian Frederick
vxlan_xmit_one() was only called from vxlan_xmit() without rdst and info was already tested. Emit warning in that function instead Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25vxlan: add unlikely to vxlan_remcsum checkFabian Frederick
small optimization around checking as it's being done in all receptions Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25vxlan: don't collect metadata if remote checksum is wrongFabian Frederick
call vxlan_remcsum() before md filling in vxlan_rcv() Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: ethernet: cavium: octeon_mgmt: use phy_start and phy_stopIvan Khoronzhuk
To start also "phy state machine", with UP state as it should be, the phy_start() has to be used, in another case machine even is not triggered. After this change negotiation is supposed to be triggered by SM workqueue. It's not correct usage, but it appears after the following patch, so add it as a fix. Fixes: 74a992b3598a ("net: phy: add phy_check_link_status") Signed-off-by: Ivan Khoronzhuk <ikhoronz@cisco.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: stmmac: Fix clock handling on remove pathWong Vee Khee
While unloading the dwmac-intel driver, clk_disable_unprepare() is being called twice in stmmac_dvr_remove() and intel_eth_pci_remove(). This causes kernel panic on the second call. Removing the second call of clk_disable_unprepare() in intel_eth_pci_remove(). Fixes: 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove paths") Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: stmmac: Add option for VLAN filter fail queue enableChuah, Kim Tatt
Add option in plat_stmmacenet_data struct to enable VLAN Filter Fail Queuing. This option allows packets that fail VLAN filter to be routed to a specific Rx queue when Receive All is also set. When this option is enabled: - Enable VFFQ only when entering promiscuous mode, because Receive All will pass up all rx packets that failed address filtering (similar to promiscuous mode). - VLAN-promiscuous mode is never entered to allow rx packet to fail VLAN filters and get routed to selected VFFQ Rx queue. Reviewed-by: Voon Weifeng <weifeng.voon@intel.com> Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25vmxnet3: fix cksum offload issues for non-udp tunnelsRonak Doshi
Commit dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") added support for encapsulation offload. However, the inner offload capability is to be restrictued to UDP tunnels. This patch fixes the issue for non-udp tunnels by adding features check capability and filtering appropriate features for non-udp tunnels. Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") Signed-off-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: dsa: sja1105: implement .devlink_info_getVladimir Oltean
Return the driver name and ASIC ID so that generic user space application are able to know they're looking at sja1105 devlink regions when pretty-printing them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: dsa: sja1105: expose static config as devlink regionVladimir Oltean
As explained in Documentation/networking/dsa/sja1105.rst, this switch has a static config held in the driver's memory and re-uploaded from time to time into the device (after any major change). The format of this static config is in fact described in UM10944.pdf and it contains all the switch's settings (it also contains device ID, table CRCs, etc, just like in the manual). So it is a useful and universal devlink region to expose to user space, for debugging purposes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: dsa: sja1105: move devlink param code to sja1105_devlink.cVladimir Oltean
We'll have more devlink code soon. Group it together in a separate translation object. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25drivers/net/ethernet: clean up mis-targeted commentsJesse Brandeburg
As part of the W=1 cleanups for ethernet, a million [*] driver comments had to be cleaned up to get the W=1 compilation to succeed. This change finally makes the drivers/net/ethernet tree compile with W=1 set on the command line. NOTE: The kernel uses kdoc style (see Documentation/process/kernel-doc.rst) when documenting code, not doxygen or other styles. After this patch the x86_64 build has no warnings from W=1, however scripts/kernel-doc says there are 1545 more warnings in source files, that I need to develop a script to fix in a followup patch. The errors fixed here are all kdoc of a few classes, with a few outliers: In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10: drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=] 1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; | ^~~~~~~~~~~~~~ ... repeats 4 times... drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 2084 | RX_USED_ADD(page, i); drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’: drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] 603 | u32 tbisr, tanar, tanlpar; | ^~~~~ drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’: drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] 1207 | u32 cfg, tanar, tbicr; | ^~~~~ drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] 1063 | int data_size, yf_size; | ^~~~~~~ Normal kdoc fixes: warning: Function parameter or member 'x' not described in 'y' warning: Excess function parameter 'x' description in 'y' warning: Cannot understand <string> on line <NNN> - I thought it was a doc line [*] - ok it wasn't quite a million, but it felt like it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25sfc: fix kdoc warningJesse Brandeburg
kernel-doc script as used by W=1, is confused by the macro usage inside the header describing the efx_ptp_data struct. drivers/net/ethernet/sfc/ptp.c:345: warning: Function parameter or member 'MC_CMD_PTP_IN_TRANSMIT_LENMAX' not described in 'efx_ptp_data' After some discussion on the list, break this patch out to a separate one, and fix the issue through a creative macro declaration. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25drivers/net/ethernet: remove incorrectly formatted docJesse Brandeburg
As part of the W=1 series for ethernet, these drivers were discovered to be using kdoc style comments but were not actually doing kdoc. The kernel uses kdoc style when documenting code, not doxygen or other styles. Fixed Warnings: drivers/net/ethernet/amazon/ena/ena_com.c:613: warning: Function parameter or member 'ena_dev' not described in 'ena_com_set_llq' drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c:1540: warning: Cannot understand * @brief Set VLAN filter table drivers/net/ethernet/xilinx/ll_temac_main.c:114: warning: Function parameter or member 'lp' not described in 'temac_indirect_busywait' drivers/net/ethernet/xilinx/ll_temac_main.c:129: warning: Function parameter or member 'lp' not described in 'temac_indirect_in32' drivers/net/ethernet/xilinx/ll_temac_main.c:129: warning: Function parameter or member 'reg' not described in 'temac_indirect_in32' drivers/net/ethernet/xilinx/ll_temac_main.c:147: warning: Function parameter or member 'lp' not described in 'temac_indirect_in32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:147: warning: Function parameter or member 'reg' not described in 'temac_indirect_in32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'lp' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'reg' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'value' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'lp' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'reg' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'value' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:212: warning: Function parameter or member 'lp' not described in 'temac_dma_in32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:212: warning: Function parameter or member 'reg' not described in 'temac_dma_in32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'lp' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'reg' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'value' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:247: warning: Function parameter or member 'lp' not described in 'temac_dma_dcr_in' drivers/net/ethernet/xilinx/ll_temac_main.c:247: warning: Function parameter or member 'reg' not described in 'temac_dma_dcr_in' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'lp' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'reg' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'value' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'lp' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'op' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'np' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:300: warning: Function parameter or member 'ndev' not described in 'temac_dma_bd_release' drivers/net/ethernet/xilinx/ll_temac_main.c:330: warning: Function parameter or member 'ndev' not described in 'temac_dma_bd_init' drivers/net/ethernet/xilinx/ll_temac_main.c:600: warning: Function parameter or member 'ndev' not described in 'temac_setoptions' drivers/net/ethernet/xilinx/ll_temac_main.c:600: warning: Function parameter or member 'options' not described in 'temac_setoptions' Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25drivers/net/ethernet: add some basic kdoc tagsJesse Brandeburg
A couple of drivers had a "generic documentation" section that would trigger a "can't understand" message from W=1 compiles. Fix by using correct DOC: tags in the generic sections. Fixed Warnings: drivers/net/ethernet/arc/emac_arc.c:4: info: Scanning doc for c drivers/net/ethernet/cadence/macb_pci.c:3: warning: missing initial short description on line: * Cadence GEM PCI wrapper. drivers/net/ethernet/cadence/macb_pci.c:3: info: Scanning doc for Cadence Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 09:46:06 +0000