summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-09-28net: xen-netback: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28qed: Remove set but not used variable 'p_archipelago'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/qlogic/qed/qed_ooo.c: In function 'qed_ooo_delete_isles': drivers/net/ethernet/qlogic/qed/qed_ooo.c:354:30: warning: variable 'p_archipelago' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/qlogic/qed/qed_ooo.c: In function 'qed_ooo_join_isles': drivers/net/ethernet/qlogic/qed/qed_ooo.c:463:30: warning: variable 'p_archipelago' set but not used [-Wunused-but-set-variable] Since commit 1eec2437d14c ("qed: Make OOO archipelagos into an array"), 'p_archipelago' is no longer in use. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28ieee802154: mcr20a: Remove struct mcr20a_platform_dataXue Liu
The struct mcr20a_platform_data is uesed only in probe function and it holds only one member. So it is not necessary to reserve it. Using gpiod family API to handle reset pin. Signed-off-by: Xue Liu <liuxuenetmail@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-09-28iwlwifi: mvm: Allow TKIP for AP modeIlan Peer
Support for setting keys for TKIP cipher suite was mistakenly removed for AP mode. Fix this. Fixes: 85aeb58cec1a ("iwlwifi: mvm: Enable security on new TX API") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: fix LED command capability bitJohannes Berg
The capability bit was added to the driver and had been negotiated with the firmware, but then got forgotten in the firmware and later reused for a different capability. Now the firmware added it in a new bit. Fixes: 2eabc84d2f8e ("iwlwifi: mvm: only send LEDS_CMD when the FW supports it") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: configure power scheme to balanced for 22560 devicesGolan Ben Ami
As a temporary stage in the 22560 devices bring up, we disabled power save, to avoid bugs related to that domain. Now we would like to use power save so enable the balanced mode, and allow configuring the mode via module parameter. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: add infrastructure for multiple debug buffersSara Sharon
In future devices we will have more than one debug buffer. Prepare the infrastructure for allocation and release of multiple debug buffers by grouping the variables in an array of structures and moving it to trans section, where they will be visible to opmode and FW. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: support transmitting SKBs with fraglistJohannes Berg
We want to be able to build A-MSDUs in higher layers, e.g. by xmit_more, so support transmitting SKBs with fraglist to use it for such. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: remove support for adjacent channel compensationEmmanuel Grumbach
We no longer want to consider the RSSI if the beacon / probe has been heard on an adjacent channel. This was based on a firmware capability that is now unavailable. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: TLC support for Coex Schema 2Erel Geron
The new coex schema requires setting the non-shared antenna for the single_stream_ant_msk field in the TLC command. Signed-off-by: Erel Geron <erelx.geron@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: set wep key for all stations in soft ap modeAvraham Stern
When operating as a soft ap with wep security, the key was not configured to the fw for the stations, based on the fact that the key will be specified in the tx command. However, in the new tx api the tx command does not include the key, which resulted in all data frames going out un-encrypted. Fix it by configuring the key for all the stations as they are added. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: use correct FIFO lengthSara Sharon
Current FIFO size calculation is wrong for two reasons: - We access lmac 0 by default - We don't take 11ax into consideration. Fix both. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: set RB size according to user settingsShaul Triebitz
RB size can be configured by user to be greater than 4K. That's needed for monitor to capture big AMSDUs. The firmware now enables different RB sizes configuration via context info. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: do not override amsdu size user settingsShaul Triebitz
Since AMSDUs are not de-aggregated by HW in monitor mode, we still need the option for setting large RBs (up to 12K). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: fit reclaim msg to MAX_MSG_LENGolan Ben Ami
Today, the length of a debug message in iwl_trans_pcie_reclaim may pass the MAX_MSG_LEN, which is 110. An example for this kind of message is: 'iwl_trans_pcie_reclaim: Read index for DMA queue txq id (2), last_to_free 65535 is out of range [0-65536] 2 2.' Cut the message a bit so it will fit the allowed MAX_MSG_LEN. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: Fail fast if HW is inaccessible at probeRajat Jain
If the HW is not responding at probe time, fail immediately complaining about it. Without this, we see that the kernel spends > 100ms trying to load firmware (even gives an incorrect impression that it actually loaded a firmware) and do unnecesary processing before concluding that the device is not accessible: INFO kernel: [ 34.092678] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) WARNING kernel: [ 34.093560] iwlwifi 0000:01:00.0: Direct firmware load for iwl-dbg-cfg.ini failed with error -2 INFO kernel: [ 34.111523] iwlwifi 0000:01:00.0: loaded firmware version 17.318154.0 op_mode iwlmvm INFO kernel: [ 34.173250] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0xFFFFFFFF ERR kernel: [ 34.198023] iwlwifi 0000:01:00.0: iwlwifi transaction failed, dumping registers ERR kernel: [ 34.198044] iwlwifi 0000:01:00.0: iwlwifi device config registers: Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: tx: pull tracing out of iwl_fill_data_tbs()Johannes Berg
This will allow us to reuse the function later for adding fraglist SKBs to the TFD. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: tx: unify TFD unmappingJohannes Berg
When anything fails, we unmap the whole TFD in three different places scattered throughout the code. Unify this to a single place. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: gen2: build A-MSDU only for GSOJohannes Berg
If the incoming frame should be an A-MSDU, it may already be one, for example in the case of NAN multicast being encapsulated in an A-MSDU. Thus, use the GSO algorithm to build A-MSDU only if the skb actually contains GSO data. Fixes: 6ffe5de35b05 ("iwlwifi: pcie: add AMSDU to gen2") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: gen2: pull adding frags to helper routineJohannes Berg
Move the skb fragment loop into a helper routine to be able to reuse it later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: api: annotate compressed BA notif array sizesJohannes Berg
Annotate the compressed BA notification array sizes and make both of them 0-length since the length of 1 is just confusing - it may be different than that and the offset to the second one needs to be calculated in the C code anyhow. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: Support TKIP on gen2 data pathDavid Spinadel
Make the adjustments for gen2 TX and RX of TKIP packets. Strip MIC on RX. Don't add IV space and keep the MIC space zeroed on TX. Devices that support gen2 data path support TKIP only in station mode. In all other modes, fall back to SW encryption. Do this early in the set_key() callback so that the key flags would not be incorrectly set. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: read correct prph address for newer devicesSara Sharon
For newer devices we have higher range of periphery addresses. Currently it is masked out, so we end up reading another address. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: enable sending HE_AIR_SNIFFER command via debugfsShaul Triebitz
In order to receive TB (Trigger Based) PPDU in monitor mode, the Driver must send the HE_AIR_SNIFFER_CONFIG_CMD host command. Enable that via debugfs. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: cleanup dead code on resume flow for non unified image.Dreyfuss, Haim
CDB support has nothing to do with non unified image. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: fix non_shared_ant for 22000 devicesErel Geron
The non-shared antenna was wrong for 22000 device series. Fix it to ANT_B for correct antenna preference by coex in MVM driver. Fixes: e34d975e40ff ("iwlwifi: Add a000 HW family support") Signed-off-by: Erel Geron <erelx.geron@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: dbg: don't crash if the firmware crashes in the middle of a debug dumpEmmanuel Grumbach
We can dump data from the firmware either when it crashes, or when the firmware is alive. Not all the data is available if the firmware is running (like the Tx / Rx FIFOs which are available only when the firmware is halted), so we first check that the firmware is alive to compute the required size for the dump and then fill the buffer with the data. When we allocate the buffer, we test the STATUS_FW_ERROR bit to check if the firmware is alive or not. This bit can be changed during the course of the dump since it is modified in the interrupt handler. We hit a case where we allocate the buffer while the firmware is sill working, and while we start to fill the buffer, the firmware crashes. Then we test STATUS_FW_ERROR again and decide to fill the buffer with data like the FIFOs even if no room was allocated for this data in the buffer. This means that we overflow the buffer that was allocated leading to memory corruption. To fix this, test the STATUS_FW_ERROR bit only once and rely on local variables to check if we should dump fifos or other firmware components. Fixes: 04fd2c28226f ("iwlwifi: mvm: add rxf and txf to dump data") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: remove ucode error tracepointJohannes Berg
Alexei's patch, assumed that all versions of "struct iwl_error_event_table" are the same, but there are really different versions in different files. Rather than trying to fix this, or splitting the tracepoint, or anything of the sort, just remove it entirely - turns out that nobody really uses it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: report RU offset is knownJohannes Berg
We already report the RU offset, so we'd better also report that we know the value. Fixes: e5721e3f770f ("iwlwifi: mvm: add radiotap data for HE") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: iwlmvm: fix typo when checking for TX BeamformingShaul Triebitz
Check the actual bit (mask) in Rx notification rate_n_flags. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: debug flow cleanupShahar S Matityahu
Cleanup of the debug flow by moving several flows to separate functions to increase readability. Three functions were created: 1. iwl_fw_get_prph_len - returns the size needed for periphery dump. 2. iwl_fw_dump_mem for - executes the memory dumping flow. 3. iwl_trans_get_fw_monitor_len - returns the size needed for monitor dump. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: RX API: remove unnecessary anonymous structJohannes Berg
There's no value in having an anonymous struct for holding a few fields, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: fw: stop and start debugging using host commandSara Sharon
In new devices, access to periphery is forbidden. Send instead host command to start and stop debugging. Memory allocation is written in context info, but in case we need to update it there is a dedicated command. Add definitions, currently unused, of the new command. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: fw: add a restart FW debug functionSara Sharon
Move the restart FW debug code to a function. This avoids code duplication and lays the infra to support the new start and stop host commands in some future devices. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: fix a comment about the SP lengthEmmanuel Grumbach
The SP length in the ADD_STA command is an actual number of frames, and not the SP len as it appears in the WME IE. Fix that comment. The actual code is fine. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28ppp: mppe: Remove VLA usage of skcipherKees Cook
In the quest to remove all stack VLA usage from the kernel[1], this replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(), which uses a fixed stack size. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaGreg Kroah-Hartman
Jason writes: "Second RDMA rc pull request - Fix a long standing race bug when destroying comp_event file descriptors - srp, hfi1, bnxt_re: Various driver crashes from missing validation and other cases - Fixes for regressions in patches merged this window in the gid cache, devx, ucma and uapi." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/core: Set right entry state before releasing reference IB/mlx5: Destroy the DEVX object upon error flow IB/uverbs: Free uapi on destroy RDMA/bnxt_re: Fix system crash during RDMA resource initialization IB/hfi1: Fix destroy_qp hang after a link down IB/hfi1: Fix context recovery when PBC has an UnsupportedVL IB/hfi1: Invalid user input can result in crash IB/hfi1: Fix SL array bounds check RDMA/uverbs: Fix validity check for modify QP IB/srp: Avoid that sg_reset -d ${srp_device} triggers an infinite loop ucma: fix a use-after-free in ucma_resolve_ip() RDMA/uverbs: Atomically flush and mark closed the comp event queue cxgb4: fix abort_req_rss6 struct
2018-09-27iwlwifi: 1000: set the TFD queue sizePavel Machek
.max_tfd_queue_size was ommited for 1000 card serries leading to oops in swiotlb. Fixes: 7b3e42ea2ead ("iwlwifi: support multiple tfd queue max sizes for different devices") Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-27ice: fix changing of ring descriptor size (ethtool -G)Bruce Allan
rx_mini_pending was set to an incorrect value. This was causing EINVAL to always be returned to 'ethtool -G'. The driver does not support mini or jumbo rings so the respective settings should be zero. Also, change the valid range of the number of descriptors in the rings to make the code simpler and easier for users to understand (this removes the valid settings of 8 and 16). Add a system log message indicating when the number is rounded-up from what the user specifies with the 'ethtool -G' command (i.e. when it is not a multiple of 32), and update the log message when a user-provided value is out of range to also indicate the stride. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-27ice: Update to capabilities admin queue commandAnirudh Venkataramanan
This patch makes a couple of changes in the way the driver uses the "get capabilities" command. 1. Get device capabilities in addition to function capabilities 2. Align to latest spec by using cap_count to determine size of the buffer in case of length error. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-27ieee802154: mcr20a: Replace magic number with constantsXue Liu
The combination of defined constants are used to present the state of IRQ so the magic numbers has been replaced. This is a simple coding style change which should have no impact on runtime code execution. Signed-off-by: Xue Liu <liuxuenetmail@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-09-27ice: Query the Tx scheduler node before adding itAnirudh Venkataramanan
Query the Tx scheduler tree node information from FW before adding it to the driver's software database. This will keep the node information current in driver. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-27ice: Update comment for ice_fltr_mgmt_list_entryBrett Creeley
Previously the comment stated that VSI lists should be used when a second VSI becomes a subscriber to the "VLAN address". VSI lists are always used for VLAN membership, so replace "VLAN address" with "MAC address". Also note that VLAN(s) always use VSI list rules. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-27ice: update fw version check logicJacob Keller
We have MAX_FW_API_VER_BRANCH, MAX_FW_API_VER_MAJOR, and MAX_FW_API_VER_MINOR that we use in ice_controlq.h to test when a firmware version is newer than expected. This is currently tested by comparing each field separately. Thus, we compare the branch field against the MAX_FW_API_VER_BRANCH, and so forth. This means that currently, if we suppose that the max firmware version is defined as 0.2.1, i.e. Then firmware 0.1.3 will fail to load. This is because the minor version 3 is greater than the max minor version 1. This is not intuitive, because of the notion that increasing the major firmware version to 2 should mean any firmware version with a major version is less than 2 should be considered older than 2... In order to allow both 0.2.1 and 0.1.3 to load, you would have to define the "max" firmware version as 0.2.3.. It is possible that such a firmware version doesn't even exist yet! Fix this by replacing the current logic with an updated check that behaves as follows: First, we check the major version. If it is greater than the expected version, then we prevent driver load. Additionally, a warning message is logged to indicate to the system administrator that they need to update their driver. This is now the only case where the driver will refuse to load. Second, if the major version is less than the expected version, we log an information message indicating the NVM should be updated. Third, if the major version is exact, we'll then check the minor version. If the minor version is more than two versions less than expected, we log an information message indicating the NVM should be updated. If it is more than two versions greater than the expected version, we log an information message that the driver should be updated. To support this, the ice_aq_ver_check function needs its signature updated to pass the HW structure. Since we now pass this structure, there is no need to pass the firmware API versions separately. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-27ice: update branding strings and supported device idsBruce Allan
Update branding strings and remove device ids 0x1594 and 0x1595. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-27ice: replace unnecessary memcpy with direct assignmentBruce Allan
Direct assignment is preferred over a memcpy() Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-27ice: use [sr]q.count when checking if queue is initializedJacob Keller
When shutting down the controlqs, we check if they are initialized before we shut them down and destroy the lock. This is important, as it prevents attempts to access the lock of an already shutdown queue. Unfortunately, we checked rq.head and sq.head as the value to determine if the queue was initialized. This doesn't work, because head is not reset when the queue is shutdown. In some flows, the adminq will have already been shut down prior to calling ice_shutdown_all_ctrlqs. This can result in a crash due to attempting to access the already destroyed mutex. Fix this by using rq.count and sq.count instead. Indeed, ice_shutdown_sq and ice_shutdown_rq already indicate that this is the value we should be using to determine of the queue was initialized. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-27ieee802154: ca8210: remove redundant condition check before debugfs_removezhong jiang
debugfs_remove has taken the IS_ERR into account. Just remove the unnecessary condition. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-09-26bnxt_en: Fix TX timeout during netpoll.Michael Chan
The current netpoll implementation in the bnxt_en driver has problems that may miss TX completion events. bnxt_poll_work() in effect is only handling at most 1 TX packet before exiting. In addition, there may be in flight TX completions that ->poll() may miss even after we fix bnxt_poll_work() to handle all visible TX completions. netpoll may not call ->poll() again and HW may not generate IRQ because the driver does not ARM the IRQ when the budget (0 for netpoll) is reached. We fix it by handling all TX completions and to always ARM the IRQ when we exit ->poll() with 0 budget. Also, the logic to ACK the completion ring in case it is almost filled with TX completions need to be adjusted to take care of the 0 budget case, as discussed with Eric Dumazet <edumazet@google.com> Reported-by: Song Liu <songliubraving@fb.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26vxlan: fill ttl inherit infoHangbin Liu
When add vxlan ttl inherit support, I forgot to fill it when dump vlxan info. Fix it now. Fixes: 72f6d71e491e6 ("vxlan: add ttl inherit support") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>