| Age | Commit message (Collapse) | Author |
|---|
|
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink as the interrupts are informing us about changes to the PCS
state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/E1s0OGn-009hgf-G6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use a separate phylink_mac_ops for the KSZ8830 chip-id.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1s0O7R-009gq2-Qm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1s0O7M-009gpw-Lj@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert ksz_common to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1s0O7H-009gpq-IF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The phylink_mac_config function pointer member of struct ksz_dev_ops is
never initialised, so let's remove it to simplify the code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1s0O7C-009gpk-Dh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reports [1] hitting a warning which is caused by presence
of a wrong endpoint type at the URB sumbitting stage. While there
was a check for a specific 4th endpoint, since it can switch types
between bulk and interrupt, other endpoints are trusted implicitly.
Similar warning is triggered in a couple of other syzbot issues [2].
Fix the issue by doing a comprehensive check of all endpoints
taking into account difference between high- and full-speed
configuration.
[1] Syzkaller report:
...
WARNING: CPU: 0 PID: 4721 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
<TASK>
carl9170_usb_send_rx_irq_urb+0x273/0x340 drivers/net/wireless/ath/carl9170/usb.c:504
carl9170_usb_init_device drivers/net/wireless/ath/carl9170/usb.c:939 [inline]
carl9170_usb_firmware_finish drivers/net/wireless/ath/carl9170/usb.c:999 [inline]
carl9170_usb_firmware_step2+0x175/0x240 drivers/net/wireless/ath/carl9170/usb.c:1028
request_firmware_work_func+0x130/0x240 drivers/base/firmware_loader/main.c:1107
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x669/0x1090 kernel/workqueue.c:2436
kthread+0x2e8/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
</TASK>
[2] Related syzkaller crashes:
Link: https://syzkaller.appspot.com/bug?extid=e394db78ae0b0032cb4d
Link: https://syzkaller.appspot.com/bug?extid=9468df99cb63a4a4c4e1
Reported-and-tested-by: syzbot+0ae4804973be759fa420@syzkaller.appspotmail.com
Fixes: a84fab3cbfdc ("carl9170: 802.11 rx/tx processing and usb backend")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-By: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240422183355.3785-1-n.zhandarovich@fintech.ru
|
|
VXLAN stores per-VNI statistics using vxlan_vnifilter_count().
These statistics were not updated when arp_reduce() failed its
pskb_may_pull() call.
Use vxlan_vnifilter_count() to update the VNI counter when that
happens.
Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VXLAN devices update their stats locklessly. Therefore these counters
should either be stored in per-cpu data structures or the updates
should be done using atomic increments.
Since the net_device_core_stats infrastructure is already used in
vxlan_rcv(), use it for the other rx_dropped and tx_dropped counter
updates. Update the other counters atomically using DEV_STATS_INC().
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the PTP programmable gpios to implement also PTP_PF_EXTTS
function. The pins can be configured to capture both of rising
and falling edge. Once the event is seen, then an interrupt is
generated and the LTC is saved in the registers.
On lan8814 only GPIO 3 can be configured for this.
This was tested using:
ts2phc -m -l 7 -s generic -f ts2phc.cfg
Where the configuration was the following:
---
[global]
ts2phc.pin_index 3
[eth0]
---
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit introduces LED drivers for rtl8366rb, enabling LEDs to be
described in the device tree using the same format as qca8k. Each port
can configure up to 4 LEDs.
If all LEDs in a group use the default state "keep", they will use the
default behavior after a reset. Changing the brightness of one LED,
either manually or by a trigger, will disable the default hardware
trigger and switch the entire LED group to manually controlled LEDs.
Once in this mode, there is no way to revert to hardware-controlled LEDs
(except by resetting the switch).
Software triggers function as expected with manually controlled LEDs.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The necessity of asserting the reset on removal was previously
questioned, as DSA's own cleanup methods should suffice to prevent
traffic leakage[1].
When a driver has subdrivers controlled by devres, they will be
unregistered after the main driver's .remove is executed. If it asserts
a reset, the subdrivers will be unable to communicate with the hardware
during their cleanup. For LEDs, this means that they will fail to turn
off, resulting in a timeout error.
[1] https://lore.kernel.org/r/20240123215606.26716-9-luizluca@gmail.com/
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This switch family supports four LEDs for each of its six ports. Each
LED group is composed of one of these four LEDs from all six ports. LED
groups can be configured to display hardware information, such as link
activity, or manually controlled through a bitmap in registers
RTL8366RB_LED_0_1_CTRL_REG and RTL8366RB_LED_2_3_CTRL_REG.
After a reset, the default LED group configuration for groups 0 to 3
indicates, respectively, link activity, link at 1000M, 100M, and 10M, or
RTL8366RB_LED_CTRL_REG as 0x5432. These configurations are commonly used
for LED indications. However, the driver was replacing that
configuration to use manually controlled LEDs (RTL8366RB_LED_FORCE)
without providing a way for the OS to control them. The default
configuration is deemed more useful than fixed, uncontrollable turned-on
LEDs.
The driver was enabling/disabling LEDs during port_enable/disable.
However, these events occur when the port is administratively controlled
(up or down) and are not related to link presence. Additionally, when a
port N was disabled, the driver was turning off all LEDs for group N,
not only the corresponding LED for port N in any of those 4 groups. In
such cases, if port 0 was brought down, the LEDs for all ports in LED
group 0 would be turned off. As another side effect, the driver was
wrongly warning that port 5 didn't have an LED ("no LED for port 5").
Since showing the administrative state of ports is not an orthodox way
to use LEDs, it was not worth it to fix it and all this code was
dropped.
The code to disable LEDs was simplified only changing each LED group to
the RTL8366RB_LED_OFF state. Registers RTL8366RB_LED_0_1_CTRL_REG and
RTL8366RB_LED_2_3_CTRL_REG are only used when the corresponding LED
group is configured with RTL8366RB_LED_FORCE and they don't need to be
cleaned. The code still references an LED controlled by
RTL8366RB_INTERRUPT_CONTROL_REG, but as of now, no test device has
actually used it. Also, some magic numbers were replaced by macros.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Spectrum ASICs only support a single interrupt, that means that all the
events are handled by one IRQ (interrupt request) handler. Once an
interrupt is received, we schedule tasklet to handle events from EQ and
then schedule tasklets to handle completions from CQs. Tasklet runs in
softIRQ (software IRQ) context, and will be run on the same CPU which
scheduled it. That means that today we use only one CPU to handle all the
packets (both network packets and EMADs) from hardware.
This can be improved using NAPI. The idea is to use NAPI instance per
CQ, which is mapped 1:1 to DQ (RDQ or SDQ). NAPI poll method can be run
in kernel thread, so then the driver will be able to handle WQEs in several
CPUs. Convert the existing code to use NAPI APIs.
Add NAPI instance as part of 'struct mlxsw_pci_queue' and initialize it
as part of CQs initialization. Set the appropriate poll method and dummy
net device, according to queue number, similar to tasklet setup. For CQs
which are used for completions of RDQ, use Rx poll method and
'napi_dev_rx', which is set as 'threaded'. It means that Rx poll method
will run in kernel context, so several RDQs will be handled in parallel.
For CQs which are used for completions of SDQ, use Tx poll method and
'napi_dev_tx', this method will run in softIRQ context, as it is
recommended in NAPI documentation, as Tx packets' processing is short task.
Convert mlxsw_pci_cq_{rx,tx}_tasklet() to poll methods. Handle 'budget'
argument - ignore it in Tx poll method, as it is recommended to not limit
Tx processing. For Rx processing, handle up to 'budget' completions.
Return 'work_done' which is the amount of completions that were handled.
Handle the following cases:
1. After processing 'budget' completions, the driver still has work to do:
Return work-done = budget. In that case, the NAPI instance will be
polled again (without the need to be rescheduled). Do not re-arm the
queue, as NAPI will handle the reschedule, so we do not have to involve
hardware to send an additional interrupt for the completions that should
be processed.
2. Event processing has been completed:
Call napi_complete_done() to mark NAPI processing as completed, which
means that the poll method will not be rescheduled. Re-arm the queue,
as all completions were handled.
In case that poll method handled exactly 'budget' completions, return
work-done = budget -1, to distinguish from the case that driver still
has completions to handle. Otherwise, return the amount of completions
that were handled.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The next patch will set the driver to use NAPI for event processing. Then
tasklet mechanism will be used only for EQ. Reorganize 'mlxsw_pci_queue'
to hold EQ and CQ attributes in a union. For now, add tasklet for both EQ
and CQ. This will be changed in the next patch, as 'tasklet_struct' will be
replaced with NAPI instance.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mlxsw will use NAPI for event processing in a next patch. As preparation,
add two dummy net devices and initialize them.
NAPI instance should be attached to net device. Usually each queue is used
by a single net device in network drivers, so the mapping between net
device to NAPI instance is intuitive. In our case, Rx queues are not per
port, they are per trap-group. Tx queues are mapped to net devices, but we
do not have a separate queue for each local port, several ports share the
same queue.
Use init_dummy_netdev() to initialize dummy net devices for NAPI.
To run NAPI poll method in a kernel thread, the net device which NAPI
instance is attached to should be marked as 'threaded'. It is
recommended to handle Tx packets in softIRQ context, as usually this is
a short task - just free the Tx packet which has been transmitted.
Rx packets handling is more complicated task, so drivers can use a
dedicated kernel thread to process them. It allows processing packets from
different Rx queues in parallel. We would like to handle only Rx packets in
kernel threads, which means that we will use two dummy net devices
(one for Rx and one for Tx). Set only one of them with 'threaded' as it
will be used for Rx processing. Do not fail in case that setting 'threaded'
fails, as it is better to use regular softIRQ NAPI rather than preventing
the driver from loading.
Note that the net devices are initialized with init_dummy_netdev(), so
they are not registered, which means that they will not be visible to user.
It will not be possible to change 'threaded' configuration from user
space, but it is reasonable in our case, as there is no another
configuration which makes sense, considering that user has no influence
on the usage of each queue.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, for each CQE in CQ, we ring CQ doorbell, then handle RDQ and
ring RDQ doorbell. Finally we ring CQ arm doorbell - once per CQ tasklet.
The idea of ringing CQ doorbell before RDQ doorbell, is to be sure that
when we post new WQE (after RDQ is handled), there is an available CQE.
This was done because of a hardware bug as part of
commit c9ebea04cb1b ("mlxsw: pci: Ring CQ's doorbell before RDQ's").
There is no real reason to ring RDQ and CQ doorbells for each completion,
it is better to handle several completions and reduce number of ringings,
as access to hardware is expensive (time wise) and might take time because
of memory barriers.
A previous patch changed CQ tasklet to handle up to 64 Rx packets. With
this limitation, we can ring CQ and RDQ doorbells once per CQ tasklet.
The counters of the doorbells are increased by the amount of packets
that we handled, then the device will know for which completion to send
an additional event.
To avoid reordering CQ and RDQ doorbells' ring, let the tasklet to ring
also RDQ doorbell, mlxsw_pci_cqe_rdq_handle() handles the counter but
does not ring the doorbell.
Note that with this change there is no need to copy the CQE, as we ring CQ
doorbell only after Rx packet processing (which uses the CQE) is done.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can get many completions in one interrupt. Currently, the CQ tasklet
handles up to half queue size completions, and then arms the hardware to
generate additional events, which means that in case that there were
additional completions that we did not handle, we will get immediately an
additional interrupt to handle the rest.
The decision to handle up to half of the queue size is arbitrary and was
determined in 2015, when mlxsw driver was added to the kernel. One
additional fact that should be taken into account is that while WQEs
from RDQ are handled, the CPU that handles the tasklet is dedicated for
this task, which means that we might hold the CPU for a long time.
Handle WQEs in smaller chucks, then arm CQ doorbell to notify the hardware
to send additional notifications. Set the chunk size to 64 as this number
is recommended using NAPI and the driver will use NAPI in a next patch.
Note that for now we use ARM doorbell to retrigger CQ tasklet, but with
NAPI it will be more efficient as software will reschedule the poll
method and we will not involve hardware for that.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When calling qede_parse_actions() then the
return code was only used for a non-zero check,
and then -EINVAL was returned.
qede_parse_actions() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit broke the implicit assumption
that only -EINVAL would ever be returned.
Only compile tested.
Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In qede_flow_spec_to_rule(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit introduced qede_flow_spec_to_rule(),
and this call to qede_parse_flow_attr(), it looks
like it just duplicated how it was already used.
Only compile tested.
Fixes: 37c5d3efd7f8 ("qede: use ethtool_rx_flow_rule() to remove duplicated parser code")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In qede_add_tc_flower_fltr(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit introduced these functions.
Only compile tested.
Fixes: 2ce9c93eaca6 ("qede: Ingress tc flower offload (drop action) support.")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Explicitly set 'rc' (return code), before jumping to the
unlock and return path.
By not having any code depend on that 'rc' remains at
it's initial value of -EINVAL, then we can re-use 'rc' for
the return code of function calls in subsequent patches.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The UMAC_CMD register is written from different execution
contexts and has insufficient synchronization protections to
prevent possible corruption. Of particular concern are the
acceses from the phy_device delayed work context used by the
adjust_link call and the BH context that may be used by the
ndo_set_rx_mode call.
A spinlock is added to the driver to protect contended register
accesses (i.e. reg_lock) and it is used to synchronize accesses
to UMAC_CMD.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ndo_set_rx_mode function is synchronized with the
netif_addr_lock spinlock and BHs disabled. Since this
function is also invoked directly from the driver the
same synchronization should be applied.
Fixes: 72f96347628e ("net: bcmgenet: set Rx mode before starting netif")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The EXT_RGMII_OOB_CTRL register can be written from different
contexts. It is predominantly written from the adjust_link
handler which is synchronized by the phydev->lock, but can
also be written from a different context when configuring the
mii in bcmgenet_mii_config().
The chances of contention are quite low, but it is conceivable
that adjust_link could occur during resume when WoL is enabled
so use the phydev->lock synchronizer in bcmgenet_mii_config()
to be sure.
Fixes: afe3f907d20f ("net: bcmgenet: power on MII block for all MII modes")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the base-time for taprio is in the past, start the schedule at the time
of the form "base_time + N*cycle_time" where N is the smallest possible
integer such that the above time is in the future.
Signed-off-by: Tanmay Patil <t-patil@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't populate the read-only arrays cck_rates, ofdm_rates, ht_rates_1t and
channel_all on the stack at run time, instead make them static const and
clean up the formatting.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240425155733.114423-1-colin.i.king@gmail.com
|
|
rtw89_phy_get_kpath
The assignment of the else and if branches is the same in the "case:
MLO_2_PLUS_0_1RF" branch of the function rtw89_phy_get_kpath, so we
remove it and add comments here to make the code easier to understand.
./drivers/net/wireless/realtek/rtw89/phy.c:6406:2-4: WARNING: possible condition with no effect (if == else).
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8812
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240422072922.50940-1-jiapeng.chong@linux.alibaba.com
|
|
If there is any changes with Wi-Fi/Bluetooth, the mechanism will
trigger run_coex to update information and coexistence mechanism.
Enable/Disable reports here can make sure the action take effect
in time.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240423130502.32682-9-pkshih@realtek.com
|
|
BTG(A hardware block, which Wi-Fi 2.4Ghz & Bluetooth shared a part
of hardware). Because some information are saved in role info. So the
logic also need to get value from the version 8 role info.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240423130502.32682-8-pkshih@realtek.com
|
|
This function is to let Bluetooth know Wi-Fi is using which channel,
and ask Bluetooth do not hop into the nearby channel. Wi-Fi channel
is saved at role info, this patch make the logic also get the channel
value from version 8 role info.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240423130502.32682-7-pkshih@realtek.com
|
|
It will assign wrong value to version 7 slot parameter setting, because
the structure member order has changed. Add a for-loop to assign variables
manually.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240423130502.32682-6-pkshih@realtek.com
|
|
The report is reported from Bluetooth, it shows the current Bluetooth
driver & firmware version code. Wi-Fi & Bluetooth need to use compatible
version. The version 7 report adjust the structure variables order.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240423130502.32682-5-pkshih@realtek.com
|
|
The report is reported from Bluetooth, it described the usable
Bluetooth channel map. Bluetooth should not hopped into Wi-Fi
using channel. Version 8 report adjust the structure variables
order.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240423130502.32682-4-pkshih@realtek.com
|
|
This report is reported from Bluetooth, it described Bluetooth scan
parameters. Version 7 adjust the structure variables order.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240423130502.32682-3-pkshih@realtek.com
|
|
The mechanism will use Wi-Fi null packet to stop the packets from
access point to avoid the interference to Bluetooth when switch
to Bluetooth slot. The report can check whether the null packet is
working as expected or not.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240423130502.32682-2-pkshih@realtek.com
|
|
RFE type 5 of 8852B is a type of hardware module, which can use different
external components, so update register settings accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240423121247.24714-2-pkshih@realtek.com
|
|
The CTS cannot be received by the peer due to center frequency
deviation. This issue can be solved by correct settings to
transmit proper CTS.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240423121247.24714-1-pkshih@realtek.com
|
|
This pattern of strncpy with some pointer arithmetic setting fixed-sized
intervals with string literal data is a bit weird so let's use
ethtool_puts() as this has more obvious behavior and is less-error
prone.
Nicely, we also get to drop a usage of the now deprecated strncpy() [1].
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240425-strncpy-drivers-net-dsa-lan9303-core-c-v4-1-9fafd419d7bb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support to per-packet Tx hardware timestamp request to
AF_XDP zero-copy packet via XDP Tx metadata framework. Please note that
user needs to enable Tx HW timestamp capability via igc_ioctl() with
SIOCSHWTSTAMP cmd before sending xsk Tx hardware timestamp request.
Same as implementation in RX timestamp XDP hints kfunc metadata, Timer 0
(adjustable clock) is used in xsk Tx hardware timestamp. i225/i226 have
four sets of timestamping registers. *skb and *xsk_tx_buffer pointers
are used to indicate whether the timestamping register is already occupied.
Furthermore, a boolean variable named xsk_pending_ts is used to hold the
transmit completion until the tx hardware timestamp is ready. This is
because, for i225/i226, the timestamp notification event comes some time
after the transmit completion event. The driver will retrigger hardware irq
to clean the packet after retrieve the tx hardware timestamp.
Besides, xsk_meta is added into struct igc_tx_timestamp_request as a hook
to the metadata location of the transmit packet. When the Tx timestamp
interrupt is fired, the interrupt handler will copy the value of Tx hwts
into metadata location via xsk_tx_metadata_complete().
This patch is tested with tools/testing/selftests/bpf/xdp_hw_metadata
on Intel ADL-S platform. Below are the test steps and results.
Test Step 1: Run xdp_hw_metadata app
./xdp_hw_metadata <iface> > /dev/shm/result.log
Test Step 2: Enable Tx hardware timestamp
hwstamp_ctl -i <iface> -t 1 -r 1
Test Step 3: Run ptp4l and phc2sys for time synchronization
Test Step 4: Generate UDP packets with 1ms interval for 10s
trafgen --dev <iface> '{eth(da=<addr>), udp(dp=9091)}' -t 1ms -n 10000
Test Step 5: Rerun Step 1-3 with 10s iperf3 as background traffic
Test Step 6: Rerun Step 1-4 with 10s iperf3 as background traffic
Based on iperf3 results below, the impact of holding tx completion to
throughput is not observable.
Result of last UDP packet (no. 10000) in Step 4:
poll: 1 (0) skip=99 fail=0 redir=10000
xsk_ring_cons__peek: 1
0x5640a37972d0: rx_desc[9999]->addr=f2110 addr=f2110 comp_addr=f2110 EoP
rx_hash: 0x2049BE1D with RSS type:0x1
HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (14.990 usec)
XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (4.271 usec)
No rx_vlan_tci or rx_vlan_proto, err=-95
0x5640a37972d0: ping-pong with csum=ab19 (want 315b) csum_start=34 csum_offset=6
0x5640a37972d0: complete tx idx=9999 addr=f010
HW TX-complete-time: 1679819246793036971 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (77.656 usec)
XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (132.640 usec)
HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to HW TX-complete-time sec:0.0001 (65.703 usec)
0x5640a37972d0: complete rx idx=10127 addr=f2110
Result of iperf3 without tx hwts request in step 5:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.05 sec 2.74 GBytes 2.34 Gbits/sec receiver
Result of iperf3 running parallel with trafgen command in step 6:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.04 sec 2.74 GBytes 2.34 Gbits/sec receiver
Co-developed-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240424210256.3440903-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
struct brcmf_usb_image was added in the initial commit 71bb244ba2fd5
("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") and updated
in commit 803599d40418 ("brcmfmac: store usb fw images in local linked
list.")
Its only usage was removed in commit 52f98a57d8c1 ("brcmfmac: remove
firmware list from USB driver").
Remove the structure definition now. This saves a few lines of code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/23afd8c1733ad087ce2399a07a30d689aef861d5.1714039373.git.christophe.jaillet@wanadoo.fr
|
|
struct cb_del_ampdu_pars was added in the initial commit 5b435de0d7868
("net: wireless: add brcm80211 drivers") and its only usage was removed in
commit e041f65d5f00 ("brcmsmac: Remove internal tx queue").
Remove the structure definition now. This saves a few lines of code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/fa3b190b6e9cba65ecc36fc93121c6ed8704f704.1714036681.git.christophe.jaillet@wanadoo.fr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
net: intel: start The Great Code Dedup + Page Pool for iavf
Alexander Lobakin says:
Here's a two-shot: introduce {,Intel} Ethernet common library (libeth and
libie) and switch iavf to Page Pool. Details are in the commit messages;
here's a summary:
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules. Before introducing new changes, which would need to be
copied over again, start decoupling the already existing duplicate
functionality into a new module, which will be shared between several
Intel Ethernet drivers. The first name that came to my mind was
"libie" -- "Intel Ethernet common library". Also this sounds like
"lovelie" (-> one word, no "lib I E" pls) and can be expanded as
"lib Internet Explorer" :P
The "generic", pure-software part is placed separately, so that it can be
easily reused in any driver by any vendor without linking to the Intel
pre-200G guts. In a few words, it's something any modern driver does the
same way, but nobody moved it level up (yet).
The series is only the beginning. From now on, adding every new feature
or doing any good driver refactoring will remove much more lines than add
for quite some time. There's a basic roadmap with some deduplications
planned already, not speaking of that touching every line now asks:
"can I share this?". The final destination is very ambitious: have only
one unified driver for at least i40e, ice, iavf, and idpf with a struct
ops for each generation. That's never gonna happen, right? But you still
can at least try.
PP conversion for iavf lands within the same series as these two are tied
closely. libie will support Page Pool model only, so that a driver can't
use much of the lib until it's converted. iavf is only the example, the
rest will eventually be converted soon on a per-driver basis. That is
when it gets really interesting. Stay tech.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
MAINTAINERS: add entry for libeth and libie
iavf: switch to Page Pool
iavf: pack iavf_ring more efficiently
libeth: add Rx buffer management
page_pool: add DMA-sync-for-CPU inline helper
page_pool: constify some read-only function arguments
slab: introduce kvmalloc_array_node() and kvcalloc_node()
iavf: drop page splitting and recycling
iavf: kill "legacy-rx" for good
net: intel: introduce {, Intel} Ethernet common library
====================
Link: https://lore.kernel.org/r/20240424203559.3420468-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use flow_rule_is_supp_control_flags() to reject filters with
unsupported control flags.
In case any unsupported control flags are masked,
flow_rule_is_supp_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240424125347.461995-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename goto label, as the error message is specific to the fragment flags.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240424125347.461995-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define extack locally, to reduce line lengths and aid future users.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240424125347.461995-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use flow_rule_is_supp_control_flags() to reject filters with
unsupported control flags.
In case any unsupported control flags are masked,
flow_rule_is_supp_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-5-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove goto, as it's only used once, and the error message is
specific to that context.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define extack locally, to reduce line lengths and aid future users.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fragment lookup should only be performed, when
at least one of the fragment flags are set.
This change was deliberately not included in commit
68aba00483c7 ("net: sparx5: flower: fix fragment flags handling")
as it's only needed for future proffing the code, since
"mask" is currently only set in conjunction with the
fragment flags.
(The 3rd flag FLOW_DIS_ENCAPSULATION is only used with "key")
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
