summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-04-30mac80211: remove deprecated noise field from ieee80211_rx_statusJohn W. Linville
Also remove associated IEEE80211_HW_NOISE_DBM from ieee80211_hw_flags. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-30libertas_tf: avoid warning about pr_fmt redefinitionJohn W. Linville
Also includes a minor cleanup regarding quotation of a standard kernel header file... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-30rtl8180: fix tx status reportingJohn W. Linville
When reporting Tx status, indicate that only one rate was used. Otherwise, the rate is frozen at rate index 0 (i.e. 1Mb/s). Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: stable@kernel.org
2010-04-28net/sb1250: register mdio bus in probeSebastian Siewior
"ifconfig eth0 up && ifconfig eth0 down" triggers: | kobject (a8000000cfa5a480): tried to init an initialized object, something is seriously wrong. | Call Trace: | [<ffffffff8010aabc>] dump_stack+0x8/0x34 | [<ffffffff80293128>] kobject_init+0xe8/0xf0 | [<ffffffff802d922c>] device_initialize+0x2c/0x98 | [<ffffffff802d9cfc>] device_register+0x14/0x28 | [<ffffffff80312cd4>] mdiobus_register+0xdc/0x1e0 | [<ffffffff80314cf0>] sbmac_open+0x58/0x220 | [<ffffffff803519bc>] __dev_open+0x11c/0x180 | [<ffffffff8034d578>] __dev_change_flags+0x120/0x180 | [<ffffffff80351848>] dev_change_flags+0x20/0x78 | [<ffffffff803a753c>] devinet_ioctl+0x7cc/0x820 | [<ffffffff80339ac8>] sock_do_ioctl+0x38/0x90 | [<ffffffff8033a258>] compat_sock_ioctl_trans+0x408/0x1030 | [<ffffffff8033af30>] compat_sock_ioctl+0xb0/0xd0 | [<ffffffff80208b08>] compat_sys_ioctl+0xa0/0x18b8 | [<ffffffff80102f94>] handle_sys+0x114/0x130 | | sb1250-mac-mdio: probed mdiobus_register() calls device_register() which initializes the kobj of the device. mdiobus_unregister() calls only device_del() so we have one reference left. That one is leaving with mdiobus_free() which is only called on remove. Since I don't see any reason why mdiobus_register()/mdiobus_unregister() should happen in ->open()/->close() I move them to probe & exit. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28igb: Clean up left over prototype of igb_get_hw_dev_name()Emil Tantilov
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28wireless: Fix merge.Hauke Mehrtens
in your merge in 5c01d5669356e13f0fb468944c1dd4c6a7e978ad you added "int i;" into wl1271_main.c which is unused in that function. This patch fixes the merge problem: Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28iwl: cleanup: remove unneeded error handlingDan Carpenter
This is just a cleanup and doesn't change how the code works. debugfs_create_dir() and debugfs_create_file() return an error pointer (-ENODEV) if CONFIG_DEBUG_FS is not enabled, otherwise if an error occurs they return NULL. This is how they are implemented and what it says in the DebugFS documentation. DebugFS can not be compiled as a module. As a result, we only need to check for error pointers and particularly -ENODEV one time to know that DebugFS is enabled. This patch keeps the first check for error pointers and removes the rest. The other reason for this patch, is that it silences some Smatch warnings. Smatch sees the condition "(result != -ENODEV)" and assumes that it's possible for "result" to equal -ENODEV. If it were possible it would lead to an error pointer dereference. But since it's not, we can just remove the check. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28rt2x00: rt2800lib: update rfcsr & bbp init code for SoC devicesHelmut Schaa
Update the rfcsr and bbp init code for SoC devices to match with the latest Ralink driver. To have better control over which values are used for the register initialization create a new function rt2800_is_305x_soc which checks for SoC interface type, the correct RT chipset and the correct RF chipset. This is based on the assumption that all rt305x SoC devices use a rt2872 and rf3020/rf3021/rf3022. In case an unknown RF chipset is found on a SoC device with a rt2872 don't treat it as rt305x and just print a message. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28wl1271: fix a bunch of sparse warningsLuciano Coelho
A couple of sparse warnings in some rate settings (missing cpu_to_le32) were fixed. Changed the conf_sg_settings struct from le to native endianess. The values are converted to le when copying them to the acx command instead. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28wl1271: Rewrite hardware keep-alive handlingJuuso Oikarinen
The driver had a join command without keep-alive restart procedures in the channel changing code. After associated scans, the mac80211 does re-set the current channel, causing the join to occur. This would stop the hardware keep alive. To make the joins safer in this respect, this patch adds a join function that does the hardware-keep-alive magic along the join. This is now invoked in the above mentioned scenario, and also other scenarios. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28wl1271: Configure QOS nullfunc template for U-APSDSaravanan Dhanabal
When U-APSD is enabled, device is not sending power save state notifications to AP using QOS nullfunc frames. This patch configures nullfunc templates needed for U-APSD. Signed-off-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28wl1271: Improve command pollingJuuso Oikarinen
In testing I noticed that the wl1271 commands fall into two categories. In the first category are "fast" commands, these mostly take only 0 or 1 polls to complete, but occasionally upto 50 (giving a 0.5ms execution time.) In the second category, the command completion takes well more than 0.5ms (from 1.5ms upwards.) This patch fixes command polling such that it is optimal for the fast commands, but also allows sleep for the longer ones. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28ath9k: Added get_survey callback in order to get channel noiseBenoit Papillault
Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28rtl8180: use cached queue mapping for skb in rtl8180_txJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28libertas: fix 8686 firmware loading regressionDan Williams
The 'ready' condition was incorrectly evaluated which sometimes lead to failures loading the second-stage firmware on 8686 devices. (This was introduced in "libertas: consolidate SDIO firmware wait code". -- JWL) Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28wl1251: remove usage of deprecated noise valueJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28rt2x00: remove usage of deprecated noise valueJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
2010-04-28p54: remove usage of deprecated noise valueJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28libertas_tf: remove usage of deprecated noise valueJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28b43legacy: remove usage of deprecated noise valueJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28b43: remove usage of deprecated noise valueJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28ath9k: remove usage of deprecated noise valueJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28ath5k: remove usage of deprecated noise valueJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28ar9170: remove usage of deprecated noise valueJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28mwl8k: remove usage of deprecated noise valueJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28caif: Ldisc add permission check and mem-alloc error checkSjur Braendeland
Changes: o Added permission checks for installing. CAP_SYS_ADMIN and CAP_SYS_TTY_CONFIG can install the ldisc. o Check if allocation of skb was successful. Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Create multiple TX queuesBen Hutchings
Create a core TX queue and 2 hardware TX queues for each channel. If separate_tx_channels is set, create equal numbers of RX and TX channels instead. Rewrite the channel and queue iteration macros accordingly. Eliminate efx_channel::used_flags as redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Test only the first pair of TX queuesBen Hutchings
This makes no immediate difference, but we definitely do not want to test all TX queues once we allocate a pair of TX queues to each channel. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Add Siena PHY BIST and cable diagnostic supportSteve Hodgson
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Clean up efx_nic::irq_zero_countBen Hutchings
There is no need for this to be unsigned long; make it unsigned int. It does need a line in kernel-doc, so add that. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Add necessary parentheses to macro definitions in net_driver.hBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Break NAPI processing after one ring-full of TX completionsBen Hutchings
Currently TX completions do not count towards the NAPI budget. This means a continuous stream of TX completions can cause the polling function to loop indefinitely with scheduling disabled. To avoid this, follow the common practice of reporting the budget spent after processing one ring-full of TX completions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Set PERIODIC_NOEVENT flag for MC_CMD_MAC_STATSSteve Hodgson
When set, an event is not sent whenever periodic MAC statistics are raised. This avoids unnecessary wake-ups. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Update MCDI protocol definitionsBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Enable IPv6 RSS using random key for Toeplitz hashBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Read MEM_STAT for SRM_PERR as well as MEM_PERR errorsSteve Hodgson
Parity errors in different blocks of SRAM may set one of two different interrupt flags. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Log specific message for failure of NVRAM self-testBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Extend the legacy interrupt workaroundsSteve Hodgson
Siena has two problems with legacy interrupts: 1. There is no synchronisation between the ISR read completion, and the interrupt deassert message. 2. A downstream read at the "wrong" moment can return 0, and suppress generating the next interrupt. Falcon should suffer from both of these, and it appears it does. Enable EFX_WORKAROUND_15783 on Falcon as well. Also, when we see queues == 0, ensure we always schedule or rearm every event queue. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Reconfigure the XAUI serdes after an EM resetSteve Hodgson
Fix a regression introduced in d3245b28ef2a45ec4e115062a38100bd06229289 "sfc: Refactor link configuration". Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Stop masking out XGMII faults over reconfiguresSteve Hodgson
The aim of this code was to avoid a spurious XGMII fault over a MAC reconfigure. It's less relevant now that the PHY reconfigure isn't called from the MAC reconfigure. After applying this patch, our link stress test passed 48 hours of testing without ever resetting the PHY. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Handle serious errors in exactly one interrupt handlerSteve Hodgson
'Fatal' errors set an interrupt flag associated with a specific event queue; only read the syndrome vector if we see that queue's flag set (legacy interrupts) or in the interrupt handler for that queue (MSI). Do not ignore an interrupt if the fatal error flag is set but specific error flags are all zero. Even if we don't schedule a reset, we must respect the queue mask and rearm the appropriate event queues. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Consistently report short MCDI responses as EIOBen Hutchings
In some cases failing functions were returning 0 which is obviously wrong. In other cases they were returning inappropriate error codes. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Ignore parity errors in the other port's SRAMSteve Hodgson
Siena has a separate SRAM bank for each port. On single-port boards these can be merged together, so each port has an interrupt flag for parity errors in the other port's SRAM. Currently we do not enable such merging and should mask this interrupt source. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Change falcon_probe_board() to fail for unsupported boardsBen Hutchings
The driver needs specific PHY and board support code for each SFC4000 board; there is no point trying to continue if it is missing. Currently unsupported boards can trigger an 'oops'. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Always close net device at the end of a disabling resetBen Hutchings
This fixes a regression introduced by commit eb9f6744cbfa97674c13263802259b5aa0034594 "sfc: Implement ethtool reset operation". Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Wait at most 10ms for the MC to finish reading out MAC statisticsBen Hutchings
The original code would wait indefinitely if MAC stats DMA failed. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sky2: use the DMA state API instead of the pci equivalentsFUJITA Tomonori
This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28bnx2x: Remove two prefetch()Eric Dumazet
1) Even on 64bit arches, sizeof(struct sk_buff) < 256 2) No need to prefetch same pointer twice. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Acked-by: Eliezer Tamir <eliezer@tamir.org.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: disable MSI-X by default on certain Cisco adaptersNicholas Nunley
Due to an errata in 82598 parts MSI-X needs to be disabled in certain ixgbe devices designed to transfer peer-to-peer traffic on the PCIe bus. This patch sets the default interrupt type to MSI rather than MSI-X for specific Cisco ixgbe adapters. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Acked-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net/usb: add sierra_net.c driverElina Pasheva
Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-18 02:12:13 +0000