summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-04-27ixgbe: add registers etc. printout code just before resetting adaptersTaku Izumi
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igb: add registers etc. printout code just before resetting adaptersTaku Izumi
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000e: add registers etc. printout code just before resetting adaptersTaku Izumi
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cdc_ether: fix autosuspend for mbm devicesTorgny Johansson
Autosuspend works until you bring the wwan interface up, then the device does not enter autosuspend anymore. The following patch fixes the problem by setting the .manage_power field in the mbm_info struct to the same as in the cdc_info struct (cdc_manager_power). Signed-off-by: Torgny Johansson <torgny.johansson@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000: Use netdev_<level>, pr_<level> and dev_<level>Emil Tantilov
This patch is an alternative to similar patch provided by Joe Perches. Substitute DPRINTK macro for e_<level> that uses netdev_<level> and dev_<level> similar to e1000e. - Convert printk to pr_<level> where applicable. - Use common #define pr_fmt for the driver. - Use dev_<level> for displaying text in parts of the driver where the interface name is not assigned (like e1000_param.c). - Better align test with the new macros. CC: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27gianfar: Wait for both RX and TX to stopAndy Fleming
When gracefully stopping the controller, the driver was continuing if *either* RX or TX had stopped. We need to wait for both, or the controller could get into an invalid state. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbevf: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgb: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igbvf: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igb: convert igb from using PCI DMA functions to using DMA API functionsAlexander Duyck
This patch makes it so that igb now uses the DMA API functions instead of the PCI API functions. To do this the pci_dev pointer that was in the rings has been replaced with a device pointer, and as a result all references to [tr]x_ring->pdev have been replaced with [tr]x_ring->dev. This patch is based of of work originally done by Nicholas Nunley. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000e: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb4: set skb->rxhashDimitris Michailidis
Implement the ->set_flags ethtool method to control NETIF_F_RXHASH and set skb->rxhash to the HW calculated hash accordingly. Follow Eric Dumazet's suggestion and use the hash value raw. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net/sb1250: setup the pdevice within the soc codeSebastian Andrzej Siewior
doing it within the driver does not look good. And surely isn't how platform devices were meat to be used. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net/sb1250: remove CONFIG_SIBYTE_STANDALONESebastian Andrzej Siewior
CONFIG_SIBYTE_STANDALONE is gone since v2.6.31-rc1 ("MIPS: Sibyte: Remove standalone kernel support") This is a missing piece. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb4: increase serial number lengthDimitris Michailidis
Some boards have longer serial numbers in their VPD, up to 24 bytes. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb4: parse the VPD instead of relying on a static VPD layoutDimitris Michailidis
Some boards' VPDs contain additional keywords or have longer serial numbers, meaning the keyword locations are variable. Ditch the static layout and use the pci_vpd_* family of functions to parse the VPD instead. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ipheth: potential null dereferences on error pathDan Carpenter
The calls to usb_free_buffer() dereference rx_urb and tx_urb in the parameter list but those could be NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: L. Alberto Giménez <agimenez@sysvalve.es> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27smc91c92_cs: spin_unlock_irqrestore before calling smc_interrupt()Ken Kawasaki
smc91c92_cs: * spin_unlock_irqrestore before calling smc_interrupt() in media_check() to avoid lockup. * use spin_lock_irqsave for ethtool function. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27drivers/usb/net/kaweth.c: add device "Allied Telesyn AT-USB10 USB Ethernet ↵Andreas Hartmann
Adapter" akpm: reluctantly typed in from https://bugzilla.kernel.org/show_bug.cgi?id=15599 Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Update version to 2.0.9.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Prevent "scheduling while atomic" warning with cnic, bonding and vlan.Michael Chan
The bonding driver calls ndo_vlan_rx_register() while holding bond->lock. The bnx2 driver calls bnx2_netif_stop() to stop the rx handling while changing the vlgrp. The call also stops the cnic driver which sleeps while the bond->lock is held and cause the warning. This code path only needs to stop the NAPI rx handling while we are changing the vlgrp. Since no reset is going to occur, there is no need to stop cnic in this case. By adding a parameter to bnx2_netif_stop() to skip stopping cnic, we can avoid the warning. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Fix lost MSI-X problem on 5709 NICs.Michael Chan
It has been reported that under certain heavy traffic conditions in MSI-X mode, the driver can lose an MSI-X vector causing all packets in the associated rx/tx ring pair to be dropped. The problem is caused by the chip dropping the write to unmask the MSI-X vector by the kernel (when migrating the IRQ for example). This can be prevented by increasing the GRC timeout value for these register read and write operations. Thanks to Dell for helping us debug this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: Properly display 1 gig downshift warning for backplaneAnjali Singhai
Description: When using Intel smartspeed, the patch displays a warning when the link down shifts to 1 Gig. Signed-off-by: Anjali Singhai <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: cleanup ethtool autoneg inputDon Skidmore
The way we were setting autoneg via ethtool was inconstant with that of our other drivers. It will change the following: If autoneg is off: >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: off RX: off TX: off Before: >ethtool -A eth0 autoneg on >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: off RX: off TX: off Now: >ethtool -A eth0 autoneg on >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: on RX: on TX: on Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbevf: Fix link speed displayGreg Rose
The ixgbevf driver would always report 10Gig speeds even when the link speed is downshifted to 1Gig. This patch fixes that problem. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27mac80211: give virtual interface to hw_scanJohannes Berg
When scanning, it is somewhat important to scan on the correct virtual interface. All drivers that currently implement hw_scan only support a single virtual interface, but that may change and then we'd want to be ready. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k: Avoid corrupt frames being forwarded to mac80211.Vivek Natarajan
If bit 29 is set, MAC H/W can attempt to decrypt the received aggregate with WEP or TKIP, eventhough the received frame may be a CRC failed corrupted frame. If this bit is set, H/W obeys key type in keycache. If it is not set and if the key type in keycache is neither open nor AES, H/W forces key type to be open. But bit 29 should be set to 1 for AsyncFIFO feature to encrypt/decrypt the aggregate with WEP or TKIP. Cc: stable@kernel.org Reported-by: Johan Hovold <johan.hovold@lundinova.se> Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: Ranga Rao Ravuri <ranga.ravuri@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_htc: Handle CONF_IDLE during unassociated state to save power.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: Fix TX interrupt mitigation settingsLuis R. Rodriguez
TX interrupt mitigation reduces the number of interrupts by addressing several interrupt actions (AR_IMR_TXOK, AR_IMR_TXDESC) all in one interrupt so when enabling it discard setting the other interrupts. Without this TX interrupt mitigation would actually increase the number of interrupts two-fold. We still leave TX interrupt mitigation disabled as it is still being tested. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: fix noisefloor timeout handling on AR9003Felix Fietkau
When the noisefloor calibration times out, do not load -50 into the registers, since this might cause rx issues. Instead, leave enough time for the noise floor calibration to complete until the next check. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: Fix endian bug in an AR9003 EEPROM fieldFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: Fix typos in tx rate power level parsing for AR9003Felix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: use the configured power limit for AR9003Felix Fietkau
Since the new AR9003 EEPROM code does tune the card for the configured tx power level, we need to fill in the correct power limits in the TPC part of the DMA descriptor. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k: wake queue after processing edma rx framesFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: fix fast clock handling for 5GHz channelsFelix Fietkau
Combine multiple checks that were supposed to check for the same conditions, but didn't. Always enable fast PLL clock on AR9280 2.0 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: update EEPROM data structure for AR9280Felix Fietkau
Adds read access for the 5 GHz fast clock flag Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: Fix usec to hw clock conversion in 5Ghz for ar9003Vasanthakumar Thiagarajan
Fast clock operation (44Mhz) is enabled for 5Ghz in ar9003, so take care of the conversion from usec to hw clock. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: disable TX IQ calibration for AR9003Luis R. Rodriguez
Disable TX IQ calibration, it was prematurely enabled in previous versions. Cc: Paul Shaw <Paul.Shaw@Atheros.com> Cc: Thomas Hammel <Thomas.Hammel@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: fix typo in the AR9003 EEPROM data structure definitionFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: fix pll clock setting for 5ghz on AR9003Felix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: update initvals for AR9003Felix Fietkau
This synchs up the initvals to the values used on the Atheros HAL for AR9003. This specific change adds support for a new high power module. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_htc: Simplify RX IRQ handlerSujith
A bunch of validation and processing in the RX IRQ handler can be moved to the RX tasklet. The IRQ handler is already heavy, with the memory allocation for handling stream mode. Also, a memcpy of 40 bytes for every packet can be avoided in the handler. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_htc: Validate TX Endpoint IDSujith
Check for the endpoint IDs when processing TX completions and drop the unsupported EPIDs. We can add other endpoints (UAPSD,..) when support is added. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_htc: Remove unnecessary powersave restoreSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ixgb: Use pr_<level> and netdev_<level>Joe Perches
Convert DEBUGOUTx to pr_debug Convert DEBUGFUNC to more commonly used ENTER Convert mac address output to %pM Use #define pr_fmt Convert a few printks to pr_<level> Improve ixgb_mc_addr_list_update: use a temporary for current mc address Use etherdevice.h functions for mac address testing Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: ixgbe_down needs to stop dev_watchdogJohn Fastabend
There is a small race between when the tx queues are stopped and when netif_carrier_off() is called in ixgbe_down. If the dev_watchdog() timer fires during this time it is possible for a false tx timeout to occur. This patch moves the netif_carrier_off() so that it is called before the tx queues are stopped preventing the dev_watchdog timer from detecting false tx timeouts. The race is seen occosionally when FCoE or DCB settings are being configured or changed. Testing note, running ifconfig up/down will not reproduce this issue because dev_open/dev_close call dev_deactivate() and then dev_activate(). Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igb: add support for reporting 5GT/s during probe on PCIe Gen2Alexander Duyck
This change corrects the fact that we were not reporting Gen2 link speeds when we were in fact connected at Gen2 rates. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: fix bug when EITR=0 causing no writebacksJesse Brandeburg
writebacks can be held indefinitely by hardware if EITR=0, when combined with TXDCTL.WTHRESH=8. When EITR=0, WTHRESH should be set back to zero. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-18 13:21:07 +0000