summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-12-16ath9k: Support RSN MeshChun-Yeow Yeoh
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-16mac80211_hwsim: fix wmediumd_pidJohannes Berg
Fix a few minor issues with wmediumd_pid: a) make static b) use u32 to match the snd_pid type c) use ACCESS_ONCE since we don't lock it d) don't explicitly initialize to 0 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-16ath9k_hw: remove ATH9K_HW_CAP_CSTMohammed Shafi Shajakhan
its not used anywhere in the current code Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-16ath9k: validate for non-zero BSSIDMohammed Shafi Shajakhan
before concluding that the recieved beacon is for us, let us make sure that the BSSID is non-zero. when I configured ad-hoc mode as creator and left it for some time without joining I found we recieved few frames whose BSSID is zero, which we concluded wrongly as 'my_beacons' Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/freescale/fsl_pq_mdio.c net/batman-adv/translation-table.c net/ipv6/route.c
2011-12-15b43: N-PHY: check for bustype before touching BCMA CC PLLsRafał Miłecki
Reported-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15brcm80211: smac: precendence bug in wlc_phy_attach()Dan Carpenter
Negate has higher precendence than compare and since neither zero nor one are equal to four or eight the original condition is always false. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath9k: add DFS radar pulse processingZefir Kurtisi
This initial DFS module provides basic functionality to deal with radar pulses reported by the Atheros DFS HW pulse detector. The reported data is evaluated and basic plausibility checks are performed to filter false pulses. Passing radar pulses are forwarded to pattern detectors which are not yet implemented. (Some modifications to actually use ATH9K_DFS_DEBUGFS based on comments from Julian Calaby <julian.calaby@gmail.com>. -- JWL) Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath9k_hw: add DFS testing checkZefir Kurtisi
In order to enable DFS upstream we want to be sure DFS has been tested for each chipset. Push for public documentation of the requirements we want in place and allow for enabling each chipset through a single upstream commit. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath: add a debug level for DFSZefir Kurtisi
This can later be used by other drivers that implement DFS support. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15brcmsmac: Replace kmalloc/memset with kzallocLarry Finger
In ai_attach(), space is allocated for an si_info struct. Immediately after the allocation, routine ai_doattach() is called and that allocated space is set to zero. As no other routine calls ai_doattach(), kzalloc() can be utilized. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath: document ATH_DBG_MCILuis R. Rodriguez
A debug level was added to the ath module for printing MCI messages but no documentation was provided. Clarify that MCI is the Message Coexistence Interface, a private protocol used exclusively for WLAN-BT coexistence starting from AR9462. Cc: wtsao@qca.qualcomm.com Cc: rmanohar@qca.qualcomm.com Cc: mohammed@qca.qualcomm.com Cc: senthilb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath9k: avoid retransmitting aggregation frames that a BAR was sent forFelix Fietkau
The receiver will discard them anyway. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath9k: simplify tx lockingFelix Fietkau
Instead of releasing and taking back the lock over and over again in the tx path, hold the lock a bit longer, requiring much fewer lock/unlock pairs. This makes locking much easier to review and should not have any noticeable performance/latency impact. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath9k: remove bogus sequence number incrementFelix Fietkau
tid->seq_next is initialized on A-MPDU start anyway, and the comment next to this chunk of code seems to be bogus as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath9k: reduce indentation level in a few placesFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath9k: reduce the number of unnecessary BAR tx packetsFelix Fietkau
When processing A-MPDU tx status, only send a BAR for the failed packet with the highest sequence number. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath9k: change maximum software retransmission handlingFelix Fietkau
Instead of limiting a subframe to 10 A-MPDU software transmission attempts, count hardware retransmissions as well and raise the limit a bit. That way there will be fewer software retransmission attempts when traffic suffers from lots of hardware retransmissions. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-12-15tg3: Break out RSS indir table init and assignmentMatt Carlson
This patch creates a new device member to hold the RSS indirection table and separates out the code that initializes the table from the code that programs the table into device registers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Use mii_advertise_flowctrlMatt Carlson
This patch replaces tg3's internal tg3_advert_flowctrl_1000T function with mii_advertise_flowctrl provided by the kernel headers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Add 57766 ASIC rev supportMatt Carlson
This patch adds support for the 57766 ASIC revision. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Make the TX BD DMA limit configurableMatt Carlson
The 57766 ASIC rev will impose a new TX BD DMA limit on the driver. This patch prepares for 57766 support by making the tx BD DMA limit tunable. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Enable EEE support for capable 10/100 devsMatt Carlson
There are some devices in the 57765 ASIC rev that are EEE capable. Unfortunately the EEE setup code only gets executed if the device is gigabit capable. This patch fixes the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15wl12xx: alloc buffer in driver_state_read to prevent compilation warningLuciano Coelho
When compiling wl12xx for x86, there was a warning complaining about the size of the buffer we were allocating in the stack: drivers/net/wireless/wl12xx/debugfs.c: In function 'driver_state_read': drivers/net/wireless/wl12xx/debugfs.c:380:1: warning: the frame size of 1040 bytes is larger than 1024 bytes To prevent this, allocate the buffer in the heap instead. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-15Set wlvif->ps_compl to NULL in before returnPontus Fuchs
wl1271_configure_suspend_sta leaves a stale stack declared completion in wlvif->ps_compl. Set it to NULL before returning. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> [small fix to use wlvif->ps_compl instead of wl->ps_compl] Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-15wl12xx: remove unused firmware version macrosLuciano Coelho
We don't use WL12XX_BA_SUPPORT_FW_COST_VER2_START nor WL12XX_BA_SUPPORT_FW_COST_VER2_END anymore. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-15wl12xx: remove deprecated packet detection threshold configLuciano Coelho
The ACX_PD_THRESHOLD configuration command is deprecated and should not be used anymore. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-15wl12xx: use ieee80211_free_txskb()Eliad Peller
Use the newly introduced ieee80211_free_txskb() instead of dev_kfree_skb() for failed tx packets. Additionally, if the skb is a dummy packet, re-enqueue it (as the fw expects it) instead of freeing it. Reported-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-15wl12xx: call extended radio parameters for wl127x AP modeLuciano Coelho
We need to set the extended radio parameters for wl127x only. Currently, we were only calling this command with wl127x STA mode, but we should also do it for AP mode. Move the call to the extended radio paramaters to the common hw_init and use a single if for the chip type to do everything at once. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-15wl12xx: don't write out of bounds when hlid > WL12XX_MAX_LINKSLuciano Coelho
We should not get an hlid value bigger than WL12XX_MAX_LINKS from wl1271_rx_handle_data(). We have a WARN_ON in case it happens. But despite the warning, we would still go ahead and write the hlid bit into active_hlids (a stack variable). This would cause us to overwrite other data in the stack. To avoid this problem, we now skip the write when issuing the warning, so at least we don't corrupt data. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-15wl12xx: Restore testmode ABIPontus Fuchs
Commit 80900d0140a7648587982c8f299830e900e49165 accidently broke the ABI for testmode commands. Restore the ABI again. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Cc: stable@kernel.org Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-14rt2x00: Make use of ieee80211_free_txskb in tx pathHelmut Schaa
ieee80211_free_txskb should be used when dropping a frame in the device rx path such that mac80211 knows about this frame being dropped. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14mwifiex: remove cfg_workqueueAmitkumar Karwar
cfg_workqueue was added to notify cfg80211 that scan, connect or disconnect is done by calling respective completion handlers. We can avoid use of this workqueue by calling those handlers from other places. 1) Call connect, disconnect completion handlers in their callback functions. ex. Call cfg80211_connect_result() in mwifiex_cfg80211_connect() 2) Call scan completion handler after parsing response of last scan command in a queue. After removing the workqueue, variables (assoc_request etc.) and checks used for mutual exclusion become redundant. Those are also removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c
2011-12-14iwlwifi: allow to switch to HT40 if not associatedWey-Yi Guy
My previous patch 34a5b4b6af104cf18eb50748509528b9bdbc4036 iwlwifi: do not re-configure HT40 after associated Fix the case of HT40 after association on specified AP, but it break the association for some APs and cause not able to establish connection. We need to address HT40 before and after addociation. CC: stable@vger.kernel.org #3.0+ Reported-by: Andrej Gelenberg <andrej.gelenberg@udo.edu> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by: Andrej Gelenberg <andrej.gelenberg@udo.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14iwlwifi: tx_sync only on PAN contextJohannes Berg
Ted reported that he couldn't connect to some APs and bisected it to the tx_sync implementation. Disable it for the BSS context to fix this issue. Reported-by: Ted Ts'o <tytso@mit.edu> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14mwifiex: avoid double list_del in command cancel pathYogesh Ashok Powar
Command cancel path cancels the current command and moves it to free command queue. While doing that it deletes the command entry from the pending list. This is not correct as the entry has been already deleted from the pending list at 'mwifiex_exec_next_cmd'. Fixing it. Also making sure the stale command pointer is cleaned and unaccessible for later use. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14ath6kl: support for P2P mgmt operations on station interfaceAarthi Thiruvengadam
This patch enables support for doing P2P management operations like device discovery on top of a station interface. After group formation, the station interface will become a P2P GO/client interface as the case may be. This feature requires modifications to a couple of existing WMI structures and therefore new command ids and structures have been defined in order to be compatible with older firmware versions and other chips. The exception here is the wmi_connect_cmd. Adding a new field to the end of the structure will not cause any issues with previous firmware versions since firmware only checks for minimum length of the command. The other structures are of variable length, hence it was not possible to add new fields to the end. The new command ids have to be added to the end of enum wmi_cmd_id, so it has updated to match the firmware. The driver will support both the 'old' and the 'new' commands for a while by checking the firmware capabilities. Signed-off-by: Aarthi Thiruvengadam <athiruve@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-14bnx2x: handle vpd data longer than 128 bytesBarak Witkowski
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14ath6kl: Support different uart_tx pin and refclk configurationRyan Hsu
AR6003 family use uart_tx=8 and refclk=26Mhz by default, and AR6004 family uses different uart_tx pin and could also support various xtal source, moves these per hw configuration. Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-14b43: avoid calling bcma_* if CONFIG_B43_BCMA is not setJohn W. Linville
Avoids this: ERROR: "bcma_chipco_pll_write" [drivers/net/wireless/b43/b43.ko] undefined! Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13mwifiex: do not advertise custom regulatory domain capabilityAmitkumar Karwar
mwifiex driver no longer supports it's own custom regulatory rules, but custom regulatory domain capability is still advertised during wiphy registration by the driver. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13brcm80211: smac: register with bcma for specific 802.11 core revisionsArend van Spriel
The brcmsmac driver has been verified on chipsets that were supported when it was a pci device driver, ie. bcm4313, bcm43224, and bcm43225. This patch restricts the driver to 802.11 core revisions that are found in these chipsets. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13brcm80211: smac: cleanup buscore handling in aiutils.cArend van Spriel
Instead of storing the buscore information now the BCMA core device is kept for quick reference in si_info structure. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13brcm80211: smac: cleanup si_info structure definitionArend van Spriel
Number of fields are no longer needed as the BCMA provides it or makes them redundant. These have been removed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13brcm80211: smac: remove mapped core related function from aiutils.cArend van Spriel
In aiutils.c the selected core was maintained by its index number. This is obsolete using BCMA functions so several functions using that index have been removed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13brcm80211: smac: remove ai_switch_core() functionArend van Spriel
The function ai_switch_core() is no longer needed and its counterpart ai_restore_core() as well, because interrupts disabling is not needed anymore. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13brcm80211: smac: remove interrupt disable callback functionalityArend van Spriel
There is no need to interrupt disable/enable functionality any longer due to BCMA usage assures the correct core is accessed in any context. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13brcm80211: smac: INTROFF/INTRESTORE macros removedArend van Spriel
The macros were used to assure that the correct core was accessed in the ISR, but register access is now done giving the explicit core so no need to change interrupt state. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-10-03 09:57:44 +0000