summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2014-11-21r8152: adjust r8152_submit_rxhayeswang
The behavior of handling the returned status from r8152_submit_rx() is almost same, so let r8152_submit_rx() deal with the error directly. This could avoid the duplicate code. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: bcmgenet: log RX buffer allocation and RX/TX dma failuresFlorian Fainelli
To help troubleshoot heavy memory pressure conditions, add a bunch of statistics counter to log RX buffer allocation and RX/TX DMA mapping failures. These are reported like any other counters through the ethtool stats interface. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: systemport: log RX buffer allocation and RX/TX DMA failuresFlorian Fainelli
To help troubleshoot heavy memory pressure conditions, add a bunch of statistics counter to log RX buffer allocation and RX/TX DMA mapping failures. These are reported like any other counters through the ethtool stats interface. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: introduce *vlan_hwaccel_push_inside helpersJiri Pirko
Use them to push skb->vlan_tci into the payload and avoid code duplication. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: rename __vlan_put_tag to vlan_insert_tag_set_protoJiri Pirko
Name fits better. Plus there's going to be introduced __vlan_insert_tag later on. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: kill vlan_put_tag helperJiri Pirko
Since both tx and rx paths work with skb->vlan_tci, there's no need for this function anymore. Switch users directly to __vlan_hwaccel_put_tag. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: phy: micrel: add copyright entryJohan Hovold
Add myself to the list of copyright holders. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: phy: micrel: refactor interrupt configJohan Hovold
Add generic interrupt-config callback and store interrupt-level bitmask in type data for PHY types not using bit 9. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: phy: micrel: add support for clock-mode select to KSZ8081/KSZ8091Johan Hovold
Micrel KSZ8081 and KSZ8091 PHYs have the RMII Reference Clock Select bit, which is used to select 25 or 50 MHz clock mode. Note that on some revisions of the PHY (e.g. KSZ8081RND) the function of this bit is inverted so that setting it enables 25 rather than 50 MHz mode. Add a new device-tree property "micrel,rmii-reference-clock-select-25-mhz" to describe this. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: phy: micrel: add generic clock-mode-select supportJohan Hovold
Add generic RMII-Reference-Clock-Select support. Several Micrel PHY have an RMII-Reference-Clock-Select bit to select 25 MHz or 50 MHz clock mode. Recently, support for configuring this through device tree for KSZ8021 and KSZ8031 was added. Generalise this support so that it can be configured for other PHY types as well. Note that some PHY revisions (of the same type) has this bit inverted. This should be either configurable through a new device-tree property, or preferably, determined based on PHY ID if possible. Also note that this removes support for setting 25 MHz mode from board files which was also added by the above mentioned commit 45f56cb82e45 ("net/phy: micrel: Add clock support for KSZ8021/KSZ8031"). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: phy: micrel: add has-broadcast-disable flag to type dataJohan Hovold
Add has_broadcast_disable flag to type-data and generic config_init. This allows us to remove the ksz8081 config_init callback. Note that ksz8021_config_init is kept for now due to a95a18afe4c8 ("phy/micrel: KSZ8031RNL RMII clock reconfiguration bug"). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: phy: micrel: parse of nodes at probeJohan Hovold
Parse the "micrel,led-mode" property at probe, rather than at config_init time in the led-setup helper itself. Note that the bogus parent->of_node bit is removed. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: phy: micrel: add device-type abstractionJohan Hovold
Add structured device-type information and support for generic led-mode setup to the generic config_init callback. This is a first step in ultimately getting rid of device-type specific callbacks. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21sky2: use new netdev_rss_key_fill() helperIan Morris
Switch to a random RSS key rather than a fixed one. Using netdev_rss_key_fill helper also ensures that all ports share a common key. See also commit 960fb622f85180f36d3aff82af53e2be3db2f888. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21enic: support skb->xmit_moreGovindarajulu Varadarajan
Check and update posted_index only when skb->xmit_more is 0 or tx queue is full. v2: use txq_map instead of skb_get_queue_mapping(skb) Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21mac80211_hwsim: Send alpha2 only if non-zeroPatrik Flykt
A properly set alpha2 value consists of two chars that both contain letters or digits. If no value is set, both chars keep their initial value zero. Therefore do not send the alpha2 parameter to user space if either of the characters has been left at its initial zero value. Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-21virtio-net: validate features during probeJason Wang
We currently trigger BUG when VIRTIO_NET_F_CTRL_VQ is not set but one of features depending on it is. That's not a friendly way to report errors to hypervisors. Let's check, and fail probe instead. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21Merge tag 'master-2014-11-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-11-20 Please full this little batch of fixes intended for the 3.18 stream! For the mac80211 patch, Johannes says: "Here's another last minute fix, for minstrel HT crashing depending on the value of some uninitialised stack." On top of that... Ben Greear fixes an ath9k regression in which a BSSID mask is miscalculated. Dmitry Torokhov corrects an error handling routing in brcmfmac which was checking an unsigned variable for a negative value. Johannes Berg avoids a build problem in brcmfmac for arches where linux/unaligned/access_ok.h and asm/unaligned.h conflict. Mathy Vanhoef addresses another brcmfmac issue so as to eliminate a use-after-free of the URB transfer buffer if a timeout occurs. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21cxgb4 : Fix DCB priority groups being returned in wrong orderAnish Bhatt
Peer priority groups were being reversed, but this was missed in the previous fix sent out for this issue. v2 : Previous patch was doing extra unnecessary work, result is the same. Please ignore previous patch Fixes : ee7bc3cdc270 ('cxgb4 : dcb open-lldp interop fixes') Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20pptp: fix stack info leak in pptp_getname()Mathias Krause
pptp_getname() only partially initializes the stack variable sa, particularly only fills the pptp part of the sa_addr union. The code thereby discloses 16 bytes of kernel stack memory via getsockname(). Fix this by memset(0)'ing the union before. Cc: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20i40e: trigger SW INT with no ITR waitShannon Nelson
Since we want the SW INT to go off as soon as possible, write the extra bits that will turn off the ITR wait for the interrupt. Change-ID: I6d5382ba60840fa32abb7dea17c839eb4b5f68f7 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20i40evf: remove unnecessary elseMitch Williams
Since the if part of this statement contains a break, there's no reason for the else. Clean up the code and make it more obvious that the delay happens each time through the loop. Change-ID: I9292eaf7dd687688bdc401b8bd8d1d14f6944460 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20i40evf: make comparisons consistentMitch Williams
Most of the null-checking in this driver is of the style if (!foo), except these few. Make these checks consistent with the rest of the code. Change-ID: I991924f34072fa607a1b626a8b3f1fa5195d43e9 Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20i40evf: make checkpatch happyMitch Williams
This patch is the result of running checkpatch on the i40evf driver with the --strict option. The vast majority of changes are adding/removing blank lines, aligning function parameters, and correcting over-long lines. The only possible functional change is changing the flags member of the adapter structure to be non-volatile. However, according to the kernel documentation, this is not necessary and the volatile should be removed. Change-ID: Ie8c6414800924f529bef831e8845292b970fe2ed Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20i40evf: update header commentsMitch Williams
No code changes. Update comments to match actual function declarations. Change-ID: Ib830d2f154ee917a104955c0914267fc98f3d2c8 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20i40e: don't overload fieldsMitch Williams
Overloading the msg_size field in the arq_event_info struct is just a bad idea. It leads to repeated bugs when the structure is used in a loop, since the input value (buffer size) is overwritten by the output value (actual message length). Fix this by splitting the field into two and renaming to indicate the actual function of each field. Since the arq_event struct has now changed, we need to change the drivers to support this. Note that we no longer need to initialize the buffer size each time we go through a loop as this value is no longer destroyed by arq processing. In the process, we also fix a bug in i40evf_verify_api_ver where the buffer size was not correctly reinitialized each time through the loop. Change-ID: Ic7f9633cdd6f871f93e698dfb095e29c696f5581 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Ashish Shah <ashish.n.shah@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: add netpoll supportEmil Tantilov
This patch adds ixgbevf_netpoll() a callback for .ndo_poll_controller to allow for the VF interface to be used with netconsole. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: compare total_rx_packets and budget in ixgbevf_clean_rx_irqEmil Tantilov
total_rx_packets is the number of packets we had cleaned, and budget is the total number of packets that we could clean per poll. Instead of altering both of these values we can save ourselves one write to memory by just comparing total_rx_packets to the budget and as long as we are less than budget we continue cleaning. Also change the do{}while logic to while{} in order to avoid processing packets when budget is 0. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Change receive model to use double buffered page based receivesEmil Tantilov
This patch changes the basic receive path for ixgbevf so that instead of receiving the data into an skb it is received into a double buffered page. The main change is that the receives will be done in pages only and then pull the header out of the page and copy it into the sk_buff data. This has the advantages of reduced cache misses and improved performance on IOMMU enabled systems. v2: - added pfmemalloc check to a new function for reusable page - moved atomic_inc outside of #if/else in ixgbevf_add_rx_frag() - reverted the removal of the api check in ixgbevf_change_mtu() CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Update Rx next to clean in real timeEmil Tantilov
Since the next_to_clean value is only accessed by the Rx interrupt handler we can save on stack space by just storing our updated values back in next_to_clean instead of using the stack variable i. This should help to reduce stack space and we can further collapse the size of the function. Also removed non_eop_descs counter as it was never shown in the stats. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: reorder main loop in ixgbe_clean_rx_irq to allow for do/while/continueEmil Tantilov
This change allows us to go from a loop based on the descriptor to one primarily based on the budget. The advantage to this is that we can avoid carrying too many values from one iteration to the next. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Cleanup variable usage, improve stack performanceEmil Tantilov
This change is meant to help cleanup the usage of temporary variables within the Rx hot-path by removing unnecessary variables and reducing the scope of variables that do not need to exist outside the main loop. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Combine the logic for post Rx processing into single functionEmil Tantilov
This patch cleans up ixgbevf_clean_rx_irq() by merging several similar operations into a new function - ixgbevf_process_skb_fields(). CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Test Rx status bits directly out of the descriptorEmil Tantilov
Instead of keeping a local copy of the status bits from the descriptor we can just read them directly - this is accomplished with the addition of ixgbevf_test_staterr(). In addition instead of doing a byteswap on the status bits value, we can byteswap the constant values we are testing since that can be done at compile time which should help to improve performance on big-endian systems. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Update ixgbevf_alloc_rx_buffers to handle clearing of status bitsEmil Tantilov
Instead of clearing the status bits in the cleanup it makes more sense to just clear the status bits on allocation. This way we can leave the Rx descriptor rings as a read only memory block until we actually have buffers to give back to the hardware. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20mwifiex: Add USB8766 supportKristian Evensen
Adds new VID/PID for the Marvell 88W8766. The kernel currently only supports the device as PCI, but it is also available using USB. An example of a device delivered with the 88W8766 as USB is the Globalscale Mirabox. TX buffer size is set to driver default (2K), as we do not know the firmware requirement. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-20net: brcm80211: Deletion of unnecessary checks before two function callsMarkus Elfring
The functions brcmu_pkt_buf_free_skb() and release_firmware() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-20Merge tag 'mac80211-next-for-john-2014-11-20' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "It has been a while since my last pull request, so we accumulated another relatively large set of changes: * TDLS off-channel support set from Arik/Liad, with some support patches I did * custom regulatory fixes from Arik * minstrel VHT fix (and a small optimisation) from Felix * add back radiotap vendor namespace support (myself) * random MAC address scanning for cfg80211/mac80211/hwsim (myself) * CSA improvements (Luca) * WoWLAN Net Detect (wake on network found) support (Luca) * and lots of other smaller changes from many people" Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-20brcmfmac: don't include linux/unaligned/access_ok.hJohannes Berg
This is a specific implementation, <asm/unaligned.h> is the multiplexer that has the arch-specific knowledge of which of the implementations needs to be used, so include that. This issue was revealed by kbuild testing when <asm/unaligned.h> was added in <linux/ieee80211.h> resulting in redefinition of get_unaligned_be16 (and probably others). Cc: stable@vger.kernel.org # v3.17 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-20ath10k: report rx rate and signal for fragmented RxMichal Kazior
Fragmented Rx wasn't reporting everything. With the reworked Rx code it's very easy to fix it. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-20ath10k: use rx descriptor for ppdu status extractionMichal Kazior
This makes it more in line with the new Rx path. It also makes the code more reusable because Rx descriptor is more accessible. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-20ath10k: remove unused function argumentMichal Kazior
The original fix has been moved into a different place in the code. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-20ath10k: unify rx undecappingMichal Kazior
This creates a single, common path for MSDU, A-MSDU and fragmented Rx. Hopefully this will make it easier to understand Rx path and make it easier to work with. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-20ath10k: refactor htt->rx_confusedMichal Kazior
Make the rx_confused be handled by the rx indication handlers instead of the buffer popping function. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-20ath10k: simplify Rx loopMichal Kazior
Since htt_rx_mpdu_status isn't used anymore (instead attention flags are used) simplify the loop. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-20ath10k: start using sk_buff_headMichal Kazior
Instead of using manual sk_buff linking via ->next use sk_buff_head. It's more robust, cleaner and there's plenty of helper functions in kernel already to manage sk_buff_head. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-20Merge Linus' tree to be be to apply submitted patches to newer code thanJiri Kosina
current trivial.git base
2014-11-19bonding: Introduce 4 AD link speed to fix agg_bandwidthJianhua Xie
This patch adds [2.5|20|40|56] Gbps enum definition, and fixes aggregated bandwidth calculation based on above slave links. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Jianhua Xie <jianhua.xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-19bonding: change AD_LINK_SPEED_BITMASK to enum to suport more speedJianhua Xie
Port Key was determined as 16 bits according to the link speed, duplex and user key (which is yet not supported). In the old speed field, 5 bits are for speed [1|10|100|1000|10000]Mbps as below: -------------------------------------------------------------- Port key :| User key | Speed | Duplex| -------------------------------------------------------------- 16 6 1 0 This patch keeps the old layout, but changes AD_LINK_SPEED_BITMASK from bit type to an enum type. In this way, the speed field can expand speed type from 5 to 32. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Jianhua Xie <jianhua.xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-19ath9k_common: make sure DEBUG_FS and RELAY enabledOleksij Rempel
currently ath9k_common depends on this components. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-13 03:59:15 +0000