summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2014-11-12r8152: remove the duplicate init for the list of rx_donehayeswang
The INIT_LIST_HEAD(&tp->rx_done) would be done in rtl_start_rx(), so remove the unnecessary one in alloc_all_mem(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: bcm7xxx: add workaround for PHY revision E0 and F0Florian Fainelli
PHY revisions E0 and F0 share the same shorter workaround initialization sequence. Dedicate a special function for these two PHY revisions to perform the needed workaround sequence. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: bcm7xxx: add PHY revision D0 workaround sequenceFlorian Fainelli
PHY revision D0 requires a specific workaround sequence which needs to be applied to get the HW to behave properly in all corner cases conditions. Do this based on the revision we just read out of the HW using a specific function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: bcm7xxx: introduce r_rc_cal_reset helperFlorian Fainelli
This function performs a R/RC calibration reset and will start being used by more than one function in the next patches, create a helper function to factor code. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: bcm7xxx: drop A0 revision workaround and fix B0 workaroundFlorian Fainelli
bcm7445_config_init() was working around non-production version of the PHY HW block, so just remove it entirely. bcm7xxx_28nm_afe_config_init() was running for all PHY revisions greater than B0, but this workaround sequence is really specific to the B0 PHY revision, so rename the function accordingly and update the GPHY macro to use the generic config_init callback. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: bcm7xxx: only show PHY revision onceFlorian Fainelli
bcm7xxx_28nm_config_init() can be called as frequently as needed by the PHY library upon suspend/resume cycles and interface bring up/down, just print the PHY revision once and for all in order not to spam kernel logs. Fixes: d8ebfed3f11b ("net: phy: bcm7xxx: utilize PHY revision in config_init") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12irda: Convert IRDA_DEBUG to pr_debugJoe Perches
Use the normal kernel debugging mechanism which also enables dynamic_debug at the same time. Other miscellanea: o Remove sysctl for irda_debug o Remove function tracing like uses (use ftrace instead) o Coalesce formats o Realign arguments o Remove unnecessary OOM messages Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: micrel: enable led-mode for KSZ8081/KSZ8091Johan Hovold
Enable led-mode configuration for KSZ8081 and KSZ8091. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: micrel: clean up led-mode setupJohan Hovold
Clean up led-mode setup by introducing proper defines for PHY Control registers 1 and 2 and only passing the register to the setup function. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: micrel: refactor led-mode error handlingJohan Hovold
Refactor led-mode error handling. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: micrel: add led-mode sanity checkJohan Hovold
Make sure never to update more than two bits when setting the led mode, something which could for example change the reference-clock setting. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: micrel: disable broadcast for KSZ8081/KSZ8091Johan Hovold
Disable PHY address 0 as the broadcast address, so that it can be used as a unique (non-broadcast) address on a shared bus. Note that this can also be configured using the B-CAST_OFF pin on KSZ9091, but that KSZ8081 lacks this pin and is also limited to addresses 0 and 3. Specifically, this allows for dual KSZ8081 setups. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: micrel: refactor broadcast disableJohan Hovold
Refactor and clean up broadcast disable. Some Micrel PHYs have a broadcast-off bit in the Operation Mode Strap Override register which can be used to disable PHY address 0 as the broadcast address, so that it can be used as a unique (non-broadcast) address on a shared bus. Note that the KSZPHY_OMSO_RMII_OVERRIDE bit is set by default on KSZ8021/8031. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: micrel: use BIT macroJohan Hovold
Use BIT macro for bitmask definitions. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: micrel: fix config_intr error handlingJohan Hovold
Make sure never to update the control register with random data (an error code) by checking the return value after reading it. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: replace phy_drivers_register callsJohan Hovold
Replace module init/exit which only calls phy_drivers_register with module_phy_driver macro. Tested using Micrel driver, and otherwise compile-tested only. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: replace phy_driver_register callsJohan Hovold
Replace module init/exit which only calls phy_driver_register with module_phy_driver macro. Compile tested only. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12sunvnet: fix NULL pointer dereferenceDavid L Stevens
This patch fixes a NULL pointer dereference when __tx_port_find() doesn't find a matching port. Signed-off-by: David L Stevens <david.stevens@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12fm10k/igb/ixgbe: Replace __skb_alloc_page with dev_alloc_pageAlexander Duyck
The Intel drivers were pretty much just using the plain vanilla GFP flags in their calls to __skb_alloc_page so this change makes it so that they use dev_alloc_page which just uses GFP_ATOMIC for the gfp_flags value. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12phonet: Replace calls to __skb_alloc_page with __dev_alloc_pageAlexander Duyck
Replace the calls to __skb_alloc_page that are passed NULL with calls to __dev_alloc_page. In addition remove __GFP_COLD flag from allocations as we only want it for the Rx buffer which is taken care of by __dev_alloc_skb, not for any secondary allocations such as the queue element transmit descriptors. Cc: Oliver Neukum <oliver@neukum.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12cxgb4/cxgb4vf: Replace __skb_alloc_page with __dev_alloc_pageAlexander Duyck
Drop the bloated use of __skb_alloc_page and replace it with __dev_alloc_page. In addition update the one other spot that is allocating a page so that it allocates with the correct flags. Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12at86rf230: remove invalid max frame retries checkAlexander Aring
This patch removes the invalid max frame retries check from driver layer. This is already handled by nl802154 framework. Also the IEEE 802.15.4 standard doesn't allow a frame retries setting above 7. This seems to be valid for the at86rf230 transceiver but the chip running out of spec then. We only allow settings according 802.15.4 right now. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-12at86rf230: remove invalid max csma backoffs checkAlexander Aring
This patch removes the invalid check on max csma backoffs in driver layer. This is already handled by nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-12at86rf230: remove invalid backoff exponent checkAlexander Aring
This patch removes the invalid backoff exponent check from driver layer. This is already handled by nl802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-12ieee820154: remove valid page and channel checksAlexander Aring
This patch removes validation of page and channel while setting from driver layer. This is already handled by nl802154 and mac802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-11net: bcmgenet: apply MII configuration in bcmgenet_open()Florian Fainelli
In case an interface has been brought down before entering S3, and then brought up out of S3, all the initialization done during bcmgenet_probe() by bcmgenet_mii_init() calling bcmgenet_mii_config() is just lost since register contents are restored to their reset values. Re-apply this configuration anytime we call bcmgenet_open() to make sure our port multiplexer is properly configured to match the PHY interface. Since we are now calling bcmgenet_mii_config() everytime bcmgenet_open() is called, make sure we only print the message during initialization time not to pollute the console. Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks") Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11net: bcmgenet: connect and disconnect from the PHY state machineFlorian Fainelli
phy_disconnect() is the only way to guarantee that we are not going to schedule more work on the PHY state machine workqueue for that particular PHY device. This fixes an issue where a network interface was suspended prior to a system suspend/resume cycle and would then be resumed as part of mdio_bus_resume(), since the GENET interface clocks would have been disabled, this basically resulted in bus errors to appear since we are invoking the GENET driver adjust_link() callback. Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11net: qualcomm: Fix dependencyStefan Wahren
This patch removes the dependency of the VENDOR entry and fixes the QCA7000 one. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11irda: Remove IRDA_<TYPE> logging macrosJoe Perches
And use the more common mechanisms directly. Other miscellanea: o Coalesce formats o Add missing newlines o Realign arguments o Remove unnecessary OOM message logging as there's a generic stack dump already on OOM. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11ath9k_htc: remove return of value in empty definintion of ath9k_htc_deinit_debugJohn W. Linville
Cc: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnxDaniel Borkmann
Status variable is never initialized, can carry an arbitrary value on the stack and thus may let the function fail. Fixes: e90dd2645664 ("ixgbe: Make return values more direct") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11mwifiex: simplify ad hoc join capability infoJames Cameron
While preparing an ad-hoc start command, the capability info bitmap is needlessly set from the command, and then the ESS bit cleared. Change to set the bitmap directly without reference to the command. Signed-off-by: James Cameron <quozl@laptop.org> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11wlcore: make wlcore_cmd_send_failsafe() staticLuciano Coelho
The wlcore_cmd_send_failsafe() function is only called in the cmd.c file, where it is definde. Make it static. Additionally, move the EXPORT_SYMBOL macro for wl1271_cmd_send() to the right place. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11wlcore: check minimum buffer size in some cmd_send functionsLuciano Coelho
Check for the minimum required buffer length in wlcore_cmd_send() and wlcore_cmd_configure_failsafe. This ensures that we will never try to use a buffer that is smaller than the required header. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11mwifiex: fix version display problem on big endian platformsAmitkumar Karwar
It's been observed that wrong firmware version (ex. 66.14.96.p9 instead of 14.66.9.p96) is displayed on big endian platforms. The problem is fixed here. Reported-by: Daniel Mosquera <daniel.mosquera@ctag.com> Tested-by: Daniel Mosquera <daniel.mosquera@ctag.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: add spectral scan debug interfaceOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: process rx spectral packetsOleksij Rempel
use code provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: trigger spectral scan on set_channelOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: set initial spec_config valuesOleksij Rempel
use values provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: add struct ath_spec_scan_priv to ath9k_htc_privOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: add ath_ps_ops bindingsOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: fix rs_datalen conversationOleksij Rempel
For some reason it didn't coused obvious problems. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: For AR9271 chipsets, set count = 0 for endless samples.Oleksij Rempel
not sure why. Initially provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: move spectral.* to common-spectral.*Oleksij Rempel
and rename exports from ath9k_spectral_* to ath9k_cmn_spectral_* Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: move ath9k_spectral_scan_ from main.c to spectral.cOleksij Rempel
Now we should be ready to make this code common. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: make ath9k_spectral_scan_ do not depend on ath_softcOleksij Rempel
last preparation before moving ath9k_spectral_scan_ to spectral.c Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: use ath_common instead of ieee80211_hw in ath9k_spectral_scan_Oleksij Rempel
we don't have here any ieee80211_hw dependencies any way. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: use ath_ps_ops in ath9k_spectral_scan_Oleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: add ath_ps_ops bindingsOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath: add struct ath_ps_opsOleksij Rempel
we will need it to make common code Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-14 11:33:35 +0000