summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-01-08r8152: fix the wake eventhayeswang
When the autosuspend is enabled and occurs before system suspend, we should wake the device before running system syspend. Then, we could change the wake event for system suspend. Otherwise, the device would resume the system when receiving any packet. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08phy: micrel: Fix finding PHY properties in MAC node for KSZ9031.Roosen Henri
Commit 651df2183543 ("phy: micrel: Fix finding PHY properties in MAC node.") only fixes finding PHY properties in MAC node for KSZ9021. This commit applies the same fix for KSZ9031. Fixes: 8b63ec1837fa ("phylib: Make PHYs children of their MDIO bus, not the bus' parent.") Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Henri Roosen <henri.roosen@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08Merge branch 'for-linus' into work.miscAl Viro
2016-01-08Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-01-08 This series contains updates to ixgbe only. Vasu provides three fixes for ixgbe, first assigns a minimum credit to a traffic class to resolve a Tx hang for CEE mode configuration. Second fix changes the driver to use netdev->fcoe_ddp_xid instead of our local IXGBE_FCOE_DDP_MAX, since it is correctly set for our different devices and avoids a DDP skip error on X550. Lastly fix the PFC configuration to include X550 devices. Emil provides a fix for reporting the speed in ethtool by using the stored value in out adapter structure. This is due to external drivers may end up with unknown speed when calling ethtool_get_settings(). Mark fixes the handling of any outer UDP checksum, by passing the skb up with CHECKSUM_NONE when an outer UDP checksum is set. This will cause the stack to check the checksum, also do not increment an error counter because we do not really know if there is an actual error. Ixgbe ATR was not handling IPv6 extended headers, so ATR is not being performed on such packets. Fix this by skipping extended headers when they are present. Usha fixes an issue with X550 and getting FDMI HBA attributes when FCoE support is enabled. Neerav fixes an issue for X550 when FCoE and SR-IOV are enabled, which the hardware generates MDD events. Resolve this by setting the expected values in the transmit context descriptors for FCoE/FIP frames and adding a flush after writing the RDLEN register. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08irda: toim3232-sir: delete some dead codeDan Carpenter
I noticed this code because it has a typo in the module_param(), the "trs" at the end of "toim3232fliptrs" should be "rts". But it's dead code so instead of fixing it, I just deleted it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-01-08 Here's one more bluetooth-next pull request for the 4.5 kernel: - Support for CRC check and promiscuous mode for CC2520 - Fixes to btmrvl driver - New ACPI IDs for hci_bcm driver - Limited Discovery support for the Bluetooth mgmt interface - Minor other cleanups here and there Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08ixgbe: Make ATR recognize IPv6 extended headersMark Rustad
Right now ATR is not handling IPv6 extended headers, so ATR is not being performed on such packets. Fix that by skipping extended headers when they are present. This also fixes a problem where the ATR code was not checking that the inner protocol was actually TCP before setting up the signature rules. Since the protocol check is intimately involved with the extended header processing as well, this all gets fixed together. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: Fix MDD events generated when FCoE+SRIOV are enabledNeerav Parikh
When FCoE is enabled with SR-IOV on the X550 NIC the hardware generates MDD events. This patch fixes these by setting the expected values in the Tx context descriptors for FCoE/FIP frames and adding a flush after writing the RDLEN register. Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: Fix to get FDMI HBA attributes information with X550Usha Ketineni
Check whether the FCOE support is enabled for the devices to get the FDMI HBA attributes information instead of checking each device id. Also, add Model string information for X550. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: Correct handling of any outer UDP checksum settingMark Rustad
If an outer UDP checksum is set, pass the skb up with CHECKSUM_NONE so that the stack will check the checksum. Do not increment an error counter, because we don't know that there is an actual error. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: do not call check_link for ethtool in ixgbe_get_settings()Emil Tantilov
In ixgbe_get_settings() the link status and speed of the interface are determined based on a read from the LINKS register via the call to mac.ops.check.link(). This can cause issues where external drivers may end up with unknown speed when calling ethtool_get_setings(). Instead of calling the mac.ops.check_link() we can report the speed from the adapter structure which is populated by the driver. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: fix broken PFC with X550Vasu Dev
PFC is configuration is skipped for X550 devices due to a incorrect device id check, fixing that to include X550 PFC configuration. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: use correct FCoE DDP max checkVasu Dev
Use fcoe_ddp_xid from netdev as this is correctly set for different device IDs to avoid DDP skip error on X550 as "xid=0x20b out-of-range" Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: Fill at least min credits to a TC credit refillsVasu Dev
Currently credit_refill and credit_max could be zero for a TC and that is causing Tx hang for CEE mode configuration, so to fix that have at min credit assigned to a TC and that is as what IEEE mode already does. Change-ID: If652c133093a21e530f4e9eab09097976f57fb12 Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: remove forever unused IDJesse Brandeburg
Somehow an ID that has never been productized is in the code. There are no plans to use it, so just get rid of it. Change-ID: I59117d48ea9ee0360b0fe33833ac8092f8a24b4c Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: Fix Rx hash reported to the stack by our driverAnjali Singhai Jain
If the driver calls skb_set_hash even with a zero hash, that indicates to the stack that the hash calculation is offloaded in hardware. So the Stack doesn't do a SW hash which is required for load balancing if the user decides to turn of rx-hashing on our device. This patch fixes the path so that we do not call skb_set_hash if the feature is disabled. Change-ID: Ic4debfa4ff91b5a72e447348a75768ed7a2d3e1b Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: Look up MAC address in Open Firmware or IDPROMSowmini Varadhan
This is the i40e equivalent of commit c762dff24c06 ("ixgbe: Look up MAC address in Open Firmware or IDPROM"). As with that fix, attempt to look up the MAC address in Open Firmware on systems that support it, and use IDPROM on SPARC if no OF address is found. In the case of the i40e there is an assumption that the default mac address has already been set up as the primary mac filter on probe, so if this filter is obtained from the Open Firmware or IDPROM, an explicit write is needed via i40e_aq_mac_address_write() and i40e_aq_add_macvlan() invocation. The I40E_FLAG_PF_MAC flag in the platform-private i40e_pf structure tracks whether a platform-specific mac address was found, in which case calls to i40e_aq_mac_address_write() and i40e_aq_add_macvlan() will be triggered. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: allow zero MAC address for VFsMitch Williams
Allow the user to specify a zero MAC address for VFs. This removes the existing MAC address and allows the VF to use a random address. Libvirt does this normally when removing a VF from a VM. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: change log messages and error returnsMitch Williams
When VFs are being reset, there is a brief window of time when they cannot be configured because they don't have a VSI to configure. If a script is quick, it can fall through that window. To avoid defenestration, log a useful error message and return -EAGAIN. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08brcmfmac: Do not handle link downs for ibss.Hante Meuleman
Sometimes on module reload and reconnect to ibss a deauth from other station can be received. This is treated as a link down but for ibss this is wrong. It will close the interface and no data is possible. Ignore the firmware generated link down events in ibss mode, as ibss is always teared down by cfg80211. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: use jiffies for timeout in btcoexArend van Spriel
The btcoex uses a timeout which was in milliseconds and got converted to jiffies upon using timer api. Instead, convert it to jiffies and treat it as such further. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: use msecs_to_jiffies() in macro definitionsArend van Spriel
Instead to having macro definition for millisecond timeout have the definition directly in jiffies. This makes the unit of the value immediately clear and may result in code that is bit more compact. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: change brcmf_sdio_wd_timer() prototypeArend van Spriel
The function brcmf_sdio_wd_timer() has wdtick parameter. However, it is only called with two values and as such the parameter is replaced with boolean value indicating the timer should be active or not. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: Reshuffle functions to avoid forward declarationsHante Meuleman
Function prototype forward declarations are to be avoided. This patch shuffles some of the functions so the forward declarations can be removed. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: Add wowl net detect supportHante Meuleman
With wowl net detect it becomes possible to scan for specific ssids and wakeup once found. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07net: lan78xx: Fix to write to OTP(One Time Programmable) per magic number.Woojung.Huh@microchip.com
This patch fixes a bug writing to EEPROM in lan78xx_ethtool_set_eeprom() when asked to write to OTP. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: macb: Add NP4 macb config using USRIO_DISABLEDNeil Armstrong
Declare a new NP4 SoC variant having USRIO_DISABLED as capability bit. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: ethernet: cadence-macb: Add disabled usrio capsNeil Armstrong
On some platforms, the macb integration does not use the USRIO register to configure the (R)MII port and clocks. When the register is not implemented and the MACB error signal is connected to the bus error, reading or writing to the USRIO register can trigger some Imprecise External Aborts on ARM platforms. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07Merge tag 'iwlwifi-next-for-kalle-2016-01-07_2' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * bug fixes and improvements for firmware debug system (Golan and myself) * fixes for D0i3 (Eliad) * prevent muliple stations with the same MAC address * advertise support for Rx A-MSDU in A-MPDU * scan related fixes * support -20.ucode * fix WoWLAN for iwldvm * preparations towards multiple Rx queues * platform power improvements for GO mode when no clients are associated
2016-01-07Merge ath-next from ath.gitKalle Valo
No major changes to list.
2016-01-07mdio: Abstract device_remove() and device_free()Andrew Lunn
Make device_free and device_remove operations in the mdio device structure, so the core code does not need to differentiate between phy devices and generic mdio devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Add support for mdio drivers.Andrew Lunn
Not all devices on an MDIO bus are PHYs. Meaning not all MDIO drivers are PHY drivers. Add support for generic MDIO drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio_bus: Add comment to mdiobus_scan() and __mdiobus_register()Andrew Lunn
Make it clear that mdiobus_scan () will only find devices which have a vendor/product ID in registers 2 and 3. These are typically PHY devices. Other sort of MDIO devices, such as switches, are not expected to be found during the scan. Similarly, __mdiobus_register(), which calls mdiobus_scan() will only find PHY devices, and other sorts of MDIO devices are expected to be instantiated from device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio_bus: Generalise of_mdiobus_link_phydev()Andrew Lunn
This function should work with any sort of MDIO device which can be probed on the bus, not just PHY devices. So generalise it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Move phy specific bus match into phy_deviceAndrew Lunn
Matching a driver to a device has both generic parts, and parts which are specific to PHY devices. Move the PHY specific parts into phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralize setting driver module ownerAndrew Lunn
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Move PHY PM operations into phy_deviceAndrew Lunn
The MDIO PM operations are really PHY device PM operations. So move them into phy_device. This will be needed when we support devices on the mdio bus which are not PHYs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy_device: Move phy attributes into phy_deviceAndrew Lunn
The mdio_bus exports three attributes: - PHY ID is the unique 32-bits identifier for a MDIO device implementing standard MII registers MII_PHYSID1/2, which is not guaranteed to be the case for non-standard compliant devices (e.g: Ethernet switches) - PHY interface describes the data-path of the PHY/MDIO device, which is not strictly a PHY thing, but is required and needed for PHY devices to function, a MDIO device could be a control device exclusively - PHY has fixups describes what the PHY driver may have done, so completely PHY specific These are all phy attributes, not generic mdio attributes. So move the attributes into the phy device code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn
Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: mdio-octeon: Use devm_mdiobus_alloc_size()Andrew Lunn
Rather than use devm_kzalloc(), use the mdio helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: phy_{read|write}_mmd_indirect: get addr from phydevAndrew Lunn
The address of the device can be determined from the phydev structure, rather than passing it as a parameter. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: dnet: Use phy_find_first() helperAndrew Lunn
Replace the open coded search for the first phy with a call to the existing helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: add phydev_name() wrapperAndrew Lunn
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add phydev_err() and phydev_dbg() macrosAndrew Lunn
In preparation for moving some of the phy_device structure members, add macros for printing errors and debug information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Use phy_read() instead of mdiobus_read()Andrew Lunn
Since we have a phydev, make use of it and the phy_read() function. This will help with later refactoring. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07iwlwifi: pcie: properly configure the debug buffer size for 8000Emmanuel Grumbach
8000 device family has a new debug engine that needs to be configured differently than 7000's. The debug engine's DMA works in chunks of memory and the size of the buffer really means the start of the last chunk. Since one chunk is 256-byte long, we should configure the device to write to buffer_size - 256. This fixes a situation were the device would write to memory it is not allowed to access. CC: <stable@vger.kernel.org> [4.1+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: fix memory leaks in error paths upon fw error dumpEmmanuel Grumbach
When iwl_mvm_fw_error_dump fails, it needs to clear the state in mvm, which includes: * clear IWL_MVM_STATUS_DUMPING_FW_LOG * set mvm->fw_dump_trig to NULL * free the description While at it, remove a NULL check in iwl_mvm_free_fw_dump_desc since kfree is NULL safe. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit (git 2.34.1) at 2025-09-19 12:10:16 +0000