summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-08-09net/mlx5e: Use refcount_t for refcountChuhong Yuan
refcount_t is better for reference counters since its implementation can prevent overflows. So convert atomic_t ref counters to refcount_t. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Use vhca_id in generating representor port_indexParav Pandit
It is desired to use unique port indices when multiple pci devices' devlink instance have the same switch-id. Make use of vhca-id to generate such unique devlink port indices. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Simplify querying port representor parent idParav Pandit
System image GUID doesn't depend on eswitch switchdev mode. Hence, remove the check which simplifies the code. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5: E-switch, Removed unused hwidParav Pandit
Currently mlx5_eswitch_rep stores same hw ID for all representors. However it is never used from this structure. It is always used from mlx5_vport. Hence, remove unused field. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Allow concurrent creation of encap entriesVlad Buslov
Encap entries creation is fully synchronized by encap_tbl_lock. In order to allow concurrent allocation of hardware resources used to offload encapsulation, extend mlx5e_encap_entry with 'res_ready' completion. Move call to mlx5e_tc_tun_create_header_ipv{4|6}() out of encap_tbl_lock critical section. Modify code that attaches new flows to existing encap to wait for 'res_ready' completion before using the entry. Insert encap entry to table before provisioning it to hardware and modify all users of the encap table to verify that encap was fully initialized by checking completion result for non-zero value (and to wait for 'res_ready' completion, if necessary). Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Protect encap hash table with mutexVlad Buslov
To remove dependency on rtnl lock, protect encap hash table from concurrent modifications with new "encap_tbl_lock" mutex. Use the mutex to protect internal encap entry state from concurrent modification. This is necessary because a flow can be attached to multiple encap entries simultaneously, which significantly complicates using finer grained per-entry lock. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Extend encap entry with reference counterVlad Buslov
List of flows attached to encap entry is used as implicit reference counter (encap entry is deallocated when list becomes free) and as a mechanism to obtain encap entry that flow is attached to (through list head). This is not safe when concurrent modification of list of flows attached to encap entry is possible. Proper atomic reference counter is required to support concurrent access. As a preparation for extending encap with reference counting, extract code that lookups and deletes encap entry into standalone put/get helpers. In order to remove this dependency on external locking, extend encap entry with reference counter to manage its lifetime and extend flow structure with direct pointer to encap entry that flow is attached to. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Allow concurrent creation of mod_hdr entriesVlad Buslov
Mod_hdr entries creation is fully synchronized by mod_hdr_tbl->lock. In order to allow concurrent allocation of hardware resources used to offload header rewrite, extend mlx5e_mod_hdr_entry with 'res_ready' completion. Move call to mlx5_modify_header_alloc() out of mod_hdr_tbl->lock critical section. Modify code that attaches new flows to existing mh to wait for 'res_ready' completion before using the entry. Insert mh to mod_hdr table before provisioning it to hardware and modify all users of mod_hdr table to verify that mh was fully initialized by checking completion result for negative value (and to wait for 'res_ready' completion, if necessary). Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Protect mod_hdr hash table with mutexVlad Buslov
To remove dependency on rtnl lock, protect mod_hdr hash table from concurrent modifications with new mutex. Implement helper function to get flow namespace to prevent code duplication. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Protect mod header entry flows list with spinlockVlad Buslov
To remove dependency on rtnl lock, extend mod header entry with spinlock and use it to protect list of flows attached to mod header entry from concurrent modifications. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Extend mod header entry with reference counterVlad Buslov
List of flows attached to mod header entry is used as implicit reference counter (mod header entry is deallocated when list becomes free) and as a mechanism to obtain mod header entry that flow is attached to (through list head). This is not safe when concurrent modification of list of flows attached to mod header entry is possible. Proper atomic reference counter is required to support concurrent access. As a preparation for extending mod header with reference counting, extract code that lookups and deletes mod header entry into standalone put/get helpers. In order to remove this dependency on external locking, extend mod header entry with reference counter to manage its lifetime and extend flow structure with direct pointer to mod header entry that flow is attached to. To remove code duplication between legacy and switchdev mode implementations that both support mod_hdr functionality, store mod_hdr table in dedicated structure used by both fdb and kernel namespaces. New table structure is extended with table lock by one of the following patches in this series. Implement helper function to get correct mod_hdr table depending on flow namespace. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Allow concurrent creation of hairpin entriesVlad Buslov
Hairpin entries creation is fully synchronized by hairpin_tbl_lock. In order to allow concurrent initialization of mlx5e_hairpin structure instances and provisioning of hairpin entries to hardware, extend mlx5e_hairpin_entry with 'res_ready' completion. Move call to mlx5e_hairpin_create() out of hairpin_tbl_lock critical section. Modify code that attaches new flows to existing hpe to wait for 'res_ready' completion before using the hpe. Insert hpe to hairpin table before provisioning it to hardware and modify all users of hairpin table to verify that hpe was fully initialized by checking hpe->hp pointer (and to wait for 'res_ready' completion, if necessary). Modify dead peer update event handling function to save hpe's to temporary list with their reference counter incremented. Wait for completion of hpe's in temporary list and update their 'peer_gone' flag outside of hairpin_tbl_lock critical section. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Protect hairpin hash table with mutexVlad Buslov
To remove dependency on rtnl lock, protect hairpin hash table from concurrent modifications with new "hairpin_tbl_lock" mutex. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Protect hairpin entry flows list with spinlockVlad Buslov
To remove dependency on rtnl lock, extend hairpin entry with spinlock and use it to protect list of flows attached to hairpin entry from concurrent modifications. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net/mlx5e: Extend hairpin entry with reference counterVlad Buslov
List of flows attached to hairpin entry is used as implicit reference counter (hairpin entry is deallocated when list becomes free) and as a mechanism to obtain hairpin entry that flow is attached to (through list head). This is not safe when concurrent modification of list of flows attached to hairpin entry is possible. Proper atomic reference counter is required to support concurrent access. As a preparation for extending hairpin with reference counting, extract code that deletes hairpin entry into standalone function. In order to remove this dependency on external locking, extend hairpin entry with reference counter to manage its lifetime and extend flow structure with direct pointer to hairpin entry that flow is attached to. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-09net: hns3: refine some macro definitionsGuojia Liao
Macro arguments should be enclosed in parentheses, in case of expression argument, but parentheses of pure number in macro definition should be removed for simplicity. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net: hns3: add handshake with VF for PF resetHuazhong Tan
Before PF asserting function reset, it should make sure that all its VFs have been ready, otherwise, it will cause some hardware errors. So this patch adds function hclge_func_reset_sync_vf() to synchronize VF before asserting PF function reset. For new firmware which supports command HCLGE_OPC_QUERY_VF_RST_RDY, we will try to query VFs' ready status within 30 seconds. And keep the old implementation for compatible with firmware which does not support this command. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net: hns3: refine MAC pause statistics querying functionYufeng Mo
This patch refines the interface for querying MAC pause statistics, and adds structure hns3_mac_stats to keep the count of TX & RX. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net: hns3: add function display NCL_CONFIG infoYufeng Mo
This adds a new function hclge_ncl_config_data_print() to print the data of NCL_CONFIG, to make the code more readable. Also, using macro replaces some magic number. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net: hns3: add check for max TX BD num for tso and non-tso caseYunsheng Lin
Hardware supports up to 8 TX BD for non-TSO skb and 63 TX BD for TSO skb. Currently hns3 driver does not check the max BD num that required by a skb before filling desc, which may cause the hardware to issue a RAS error throug PCIe AER. This patch adds the max BD num check before filling desc, if the bd num is not within the hardware limit, it will record the error by ring->stats.sw_err_cnt counter and free the skb. This patch also cleans up the hns3_nic_bd_num function by changing the return type and removing an unnecessary check. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net: hns3: add some statitics info to tx processYunsheng Lin
This patch adds tx_vlan_err, tx_l4_proto_err, tx_l2l3l4_err and tx_tso_err counter to tx process, in order to better debug the desc filling error. This patch also adds a missing u64_stats_update_* around ring->stats.sw_err_cnt and adds hns3_rl_err to limit the error printing in the IO patch. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net: hns3: add DFX registers information for ethtool -dGuangbin Huang
Now we can use ethtool -d command to dump some registers. However, these registers information is not enough to find out where the problem is. This patch adds DFX registers information after original registers when use ethtool -d commmand to dump registers. Also, using macro replaces some related magic number. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net: hns3: modify how pause options is displayedYonglong Liu
Currently, the pause options of HNS3 shown like this: "RX/TX" is always the same with "RX negotiated/TX negotiated". Because of the driver covered the value of "RX/TX" with the value of "RX negotiated/TX negotiated" after adjust link. This patch records the pause configurations of the user, and never covered them in adjust link. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net: hns3: add input length check for debugfs write functionYufeng Mo
If the input length reaches the maximum value of size_t, the reverse is triggered when 1 is added. In addition, there is no need to have such a large length. Therefore, the input length should be checked and the value should be less than or equal to 1024. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net: hns3: clean up for vlan handling in hns3_fill_desc_vtagsYunsheng Lin
This patch refactors the hns3_fill_desc_vtags function by avoiding passing too many parameters, reducing indent level and some other clean up. This patch also adds the hns3_fill_skb_desc function to fill the first desc of a skb. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net: hns3: fix interrupt clearing error for VFHuazhong Tan
Currently, VF driver has two kinds of interrupts, reset & CMDQ RX. For revision 0x21, according to the UM, each interrupt should be cleared by write 0 to the corresponding bit, but the implementation writes 0 to the whole register in fact, it will clear other interrupt at the same time, then the VF will loss the interrupt. But for revision 0x20, this interrupt clear register is a read & write register, for compatible, we just keep the old implementation for 0x20. This patch fixes it, also, adds a new register for reading the interrupt status according to hardware user manual. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Fixes: b90fcc5bd904 ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net: hns3: fix GFP flag error in hclge_mac_update_stats()Zhongzhu Liu
When CONFIG_DEBUG_ATOMIC_SLEEP on, calling kzalloc with GFP_KERNEL in hclge_mac_update_stats() will get below warning: [ 52.514677] BUG: sleeping function called from invalid context at mm/slab.h:501 [ 52.522051] in_atomic(): 0, irqs_disabled(): 0, pid: 1015, name: ifconfig [ 52.528827] 2 locks held by ifconfig/1015: [ 52.532921] #0: (____ptrval____) (&p->lock){....}, at: seq_read+0x54/0x748 [ 52.539878] #1: (____ptrval____) (rcu_read_lock){....}, at: dev_seq_start+0x0/0x140 [ 52.547610] CPU: 16 PID: 1015 Comm: ifconfig Not tainted 5.3.0-rc3-00697-g20b80be #98 [ 52.555408] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B050.01 08/08/2019 [ 52.564242] Call trace: [ 52.566687] dump_backtrace+0x0/0x1f8 [ 52.570338] show_stack+0x14/0x20 [ 52.573646] dump_stack+0xb4/0xec [ 52.576950] ___might_sleep+0x178/0x198 [ 52.580773] __might_sleep+0x74/0xe0 [ 52.584338] __kmalloc+0x244/0x2d8 [ 52.587744] hclge_mac_update_stats+0xc8/0x1f8 [hclge] [ 52.592870] hclge_update_stats+0xe0/0x170 [hclge] [ 52.597651] hns3_nic_get_stats64+0xa0/0x458 [hns3] [ 52.602514] dev_get_stats+0x58/0x138 [ 52.606165] dev_seq_printf_stats+0x8c/0x280 [ 52.610420] dev_seq_show+0x14/0x40 [ 52.613898] seq_read+0x574/0x748 [ 52.617205] proc_reg_read+0xb4/0x108 [ 52.620857] __vfs_read+0x54/0xa8 [ 52.624162] vfs_read+0xa0/0x190 [ 52.627380] ksys_read+0xc8/0x178 [ 52.630685] __arm64_sys_read+0x40/0x50 [ 52.634509] el0_svc_common.constprop.0+0x120/0x1e0 [ 52.639369] el0_svc_handler+0x50/0x90 [ 52.643106] el0_svc+0x8/0xc So this patch uses GFP_ATOMIC instead of GFP_KERNEL to fix it. Fixes: d174ea75c96a ("net: hns3: add statistics for PFC frames and MAC control frames") Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09hv_netvsc: Fix a warning of suspicious RCU usageDexuan Cui
This fixes a warning of "suspicious rcu_dereference_check() usage" when nload runs. Fixes: 776e726bfb34 ("netvsc: fix RCU warning in get_stats") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09r8169: fix performance issue on RTL8168evlHolger Hoffstätte
Disabling TSO but leaving SG active results is a significant performance drop. Therefore disable also SG on RTL8168evl. This restores the original performance. Fixes: 93681cd7d94f ("r8169: enable HW csum and TSO") Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09Merge tag 'mlx5-fixes-2019-08-08' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-08-08 This series introduces some fixes to mlx5 driver. Highlights: 1) From Tariq, Critical mlx5 kTLS fixes to better align with hw specs. 2) From Aya, Fixes to mlx5 tx devlink health reporter. 3) From Maxim, aRFs parsing to use flow dissector to avoid relying on invalid skb fields. Please pull and let me know if there is any problem. For -stable v4.3 ('net/mlx5e: Only support tx/rx pause setting for port owner') For -stable v4.9 ('net/mlx5e: Use flow keys dissector to parse packets for ARFS') For -stable v5.1 ('net/mlx5e: Fix false negative indication on tx reporter CQE recovery') ('net/mlx5e: Remove redundant check in CQE recovery flow of tx reporter') ('net/mlx5e: ethtool, Avoid setting speed to 56GBASE when autoneg off') Note: when merged with net-next this minor conflict will pop up: ++<<<<<<< (net-next) + if (is_eswitch_flow) { + flow->esw_attr->match_level = match_level; + flow->esw_attr->tunnel_match_level = tunnel_match_level; ++======= + if (flow->flags & MLX5E_TC_FLOW_ESWITCH) { + flow->esw_attr->inner_match_level = inner_match_level; + flow->esw_attr->outer_match_level = outer_match_level; ++>>>>>>> (net) To resolve, use hunks from net (2nd) and replace: if (flow->flags & MLX5E_TC_FLOW_ESWITCH) with if (is_eswitch_flow) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09ixgbe: fix possible deadlock in ixgbe_service_task()Taehee Yoo
ixgbe_service_task() calls unregister_netdev() under rtnl_lock(). But unregister_netdev() internally calls rtnl_lock(). So deadlock would occur. Fixes: 59dd45d550c5 ("ixgbe: firmware recovery mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09devlink: remove pointless data_len arg from region snapshot createJiri Pirko
The size of the snapshot has to be the same as the size of the region, therefore no need to pass it again during snapshot creation. Remove the arg and use region->size instead. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: tundra: tsi108: use spin_lock_irqsave instead of spin_lock_irq in IRQ ↵Fuqian Huang
context As spin_unlock_irq will enable interrupts. Function tsi108_stat_carry is called from interrupt handler tsi108_irq. Interrupts are enabled in interrupt handler. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq in IRQ context to avoid this. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08team: Add vlan tx offload to hw_enc_featuresYueHaibing
We should also enable team's vlan tx offload in hw_enc_features, pass the vlan packets to the slave devices with vlan tci, let the slave handle vlan tunneling offload implementation. Fixes: 3268e5cb494d ("team: Advertise tunneling offload features") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08liquidio: Use pcie_flr() instead of reimplementing itDenis Efremov
octeon_mbox_process_cmd() directly writes the PCI_EXP_DEVCTL_BCR_FLR bit, which bypasses timing requirements imposed by the PCIe spec. This patch fixes the function to use the pcie_flr() interface instead. Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08r8169: allocate rx buffers using alloc_pages_nodeHeiner Kallweit
We allocate 16kb per rx buffer, so we can avoid some overhead by using alloc_pages_node directly instead of bothering kmalloc_node. Due to this change buffers are page-aligned now, therefore the alignment check can be removed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: dsa: sja1105: remove set but not used variables 'tx_vid' and 'rx_vid'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/dsa/sja1105/sja1105_main.c: In function sja1105_fdb_dump: drivers/net/dsa/sja1105/sja1105_main.c:1226:14: warning: variable tx_vid set but not used [-Wunused-but-set-variable] drivers/net/dsa/sja1105/sja1105_main.c:1226:6: warning: variable rx_vid set but not used [-Wunused-but-set-variable] They are not used since commit 6d7c7d948a2e ("net: dsa: sja1105: Fix broken learning with vlan_filtering disabled") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08mlxsw: spectrum: Extend to support Spectrum-3 ASICJiri Pirko
Extend existing driver for Spectrum and Spectrum-2 ASICs to support Spectrum-3 ASIC as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: selftests: Add a selftest for Flexible RX ParserJose Abreu
Add a selftest for the Flexible RX Parser feature. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: Add Flexible RX Parser support in XGMACJose Abreu
XGMAC cores also support the Flexible RX Parser feature. Add the support for it in the XGMAC core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: Implement Safety Features in XGMAC coreJose Abreu
XGMAC also supports Safety Features. This patch implements the configuration and handling of this feature in XGMAC core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: selftests: Add test for VLAN and Double VLAN FilteringJose Abreu
Add a selftest for VLAN and Double VLAN Filtering in stmmac. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: Implement VLAN Hash Filtering in XGMACJose Abreu
Implement the VLAN Hash Filtering feature in XGMAC core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: selftests: Add RSS testJose Abreu
Add a test for RSS in the stmmac selftests. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: Implement RSS and enable it in XGMAC coreJose Abreu
Implement the RSS functionality and add the corresponding callbacks in XGMAC core. Changes from v1: - Do not use magic constants (Jakub) - Use ethtool_rxfh_indir_default() (Jakub) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: xgmac: Implement tx_queue_prio()Jose Abreu
Implement the TX Queue Priority callback in XGMAC core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: xgmac: Implement set_mtl_tx_queue_weight()Jose Abreu
Implement the TX Queue Weight callback. In order for this to be active we also need to set ETS algorithm when configuring Queue. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: xgmac: Implement MMC countersJose Abreu
Implement the MMC counters feature in XGMAC core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08bonding: Add vlan tx offload to hw_enc_featuresYueHaibing
As commit 30d8177e8ac7 ("bonding: Always enable vlan tx offload") said, we should always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Now if encapsulation protocols like VXLAN is used, skb->encapsulation may be set, then the packet is passed to vlan device which based on bonding device. However in netif_skb_features(), the check of hw_enc_features: if (skb->encapsulation) features &= dev->hw_enc_features; clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results in same issue in commit 30d8177e8ac7 like this: vlan_dev_hard_start_xmit -->dev_queue_xmit -->validate_xmit_skb -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared -->validate_xmit_vlan -->__vlan_hwaccel_push_inside //skb->tci is cleared ... --> bond_start_xmit --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34 --> __skb_flow_dissect // nhoff point to IP header --> case htons(ETH_P_8021Q) // skb_vlan_tag_present is false, so vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan), //vlan point to ip header wrongly Fixes: b2a103e6d0af ("bonding: convert to ndo_fix_features") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08flow_offload: move tc indirect block to flow offloadwenxu
move tc indirect block to flow_offload and rename it to flow indirect block.The nf_tables can use the indr block architecture. Signed-off-by: wenxu <wenxu@ucloud.cn> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 20:27:41 +0000