summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-08-03ppp: mppe: Remove VLA usageKees Cook
In the quest to remove all stack VLA usage from the kernel[1], this removes the discouraged use of AHASH_REQUEST_ON_STACK (and associated VLA) by switching to shash directly and keeping the associated descriptor allocated with the regular state on the heap. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03mlxsw: core_acl_flex_actions: Remove redundant mirror resource destructionNir Dotan
In previous patch mlxsw_afa_resource_del() was added to avoid a duplicate resource detruction scenario. For mirror actions, such duplicate destruction leads to a crash as in: # tc qdisc add dev swp49 ingress # tc filter add dev swp49 parent ffff: \ protocol ip chain 100 pref 10 \ flower skip_sw dst_ip 192.168.101.1 action drop # tc filter add dev swp49 parent ffff: \ protocol ip pref 10 \ flower skip_sw dst_ip 192.168.101.1 action goto chain 100 \ action mirred egress mirror dev swp4 Therefore add a call to mlxsw_afa_resource_del() in mlxsw_afa_mirror_destroy() in order to clear that resource from rule's resources. Fixes: d0d13c1858a1 ("mlxsw: spectrum_acl: Add support for mirror action") Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03mlxsw: core_acl_flex_actions: Remove redundant counter destructionNir Dotan
Each tc flower rule uses a hidden count action. As counter resource may not be available due to limited HW resources, update _counter_create() and _counter_destroy() pair to follow previously introduced symmetric error condition handling, add a call to mlxsw_afa_resource_del() as part of the counter resource destruction. Fixes: c18c1e186ba8 ("mlxsw: core: Make counter index allocated inside the action append") Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03mlxsw: core_acl_flex_actions: Remove redundant resource destructionNir Dotan
Some ACL actions require the allocation of a separate resource prior to applying the action itself. When facing an error condition during the setup phase of the action, resource should be destroyed. For such actions the destruction was done twice which is dangerous and lead to a potential crash. The destruction took place first upon error on action setup phase and then as the rule was destroyed. The following sequence generated a crash: # tc qdisc add dev swp49 ingress # tc filter add dev swp49 parent ffff: \ protocol ip chain 100 pref 10 \ flower skip_sw dst_ip 192.168.101.1 action drop # tc filter add dev swp49 parent ffff: \ protocol ip pref 10 \ flower skip_sw dst_ip 192.168.101.1 action goto chain 100 \ action mirred egress mirror dev swp4 Therefore add mlxsw_afa_resource_del() as a complement of mlxsw_afa_resource_add() to add symmetry to resource_list membership handling. Call this from mlxsw_afa_fwd_entry_ref_destroy() to make the _fwd_entry_ref_create() and _fwd_entry_ref_destroy() pair of calls a NOP. Fixes: 140ce421217e ("mlxsw: core: Convert fwd_entry_ref list to be generic per-block resource list") Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03mlxsw: core_acl_flex_actions: Return error for conflicting actionsNir Dotan
Spectrum switch ACL action set is built in groups of three actions which may point to additional actions. A group holds a single record which can be set as goto record for pointing at a following group or can be set to mark the termination of the lookup. This is perfectly adequate for handling a series of actions to be executed on a packet. While the SW model allows configuration of conflicting actions where it is clear that some actions will never execute, the mlxsw driver must block such configurations as it creates a conflict over the single terminate/goto record value. For a conflicting actions configuration such as: # tc filter add dev swp49 parent ffff: \ protocol ip pref 10 \ flower skip_sw dst_ip 192.168.101.1 \ action goto chain 100 \ action mirred egress mirror dev swp4 Where it is clear that the last action will never execute, the mlxsw driver was issuing a warning instead of returning an error. Therefore replace that warning with an error for this specific case. Fixes: 4cda7d8d7098 ("mlxsw: core: Introduce flexible actions support") Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: systemport: Create helper to set MPDFlorian Fainelli
Create a helper function to turn on/off MPD, this will be used to avoid duplicating code as we are going to add additional types of wake-up types. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: systemport: Do not re-configure upon WoL interruptFlorian Fainelli
We already properly resume from Wake-on-LAN whether such a condition occured or not, no need to process the WoL interrupt for functional changes since that could race with other settings. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: dsa: bcm_sf2: Disable learning while in WoLFlorian Fainelli
When we are in Wake-on-LAN, we operate with the host sofware not running a network stack, so we want to the switch to flood packets in order to cause a system wake-up when matching specific filters (unicast or multicast). This was not necessary before since we supported Magic Packet which are targeting a broadcast MAC address which the switch already floods. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: dsa: bcm_sf2: Allow targeting CPU ports for CFP rulesFlorian Fainelli
ds->enabled_port_mask only contains a bitmask of user-facing enabled ports, we also need to allow programming CFP rules that target CPU ports (e.g: ports 5 and 8). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: hns3: Refine the MSIX allocation for PFJian Shen
The offset of msix number for roce is different between different revision id. We should get it from firmware, instead of a fix value. This patch refines the msix allocation, make it compatible. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: hns3: Fix MSIX allocation issue for VFJian Shen
The msix number for vf is different, depends on the max vf number. Futherly if the vf supports roce, the offset of msix is not fixed. It's incorrect to fix the msix number to 33. This patch fixes it by querying the msix number from firmware, and adjusting it with roce support. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03bnxt_en: combine 'else if' and 'else' into single branchYueHaibing
The else-if branch and else branch set mac_ok to true similarly, so combine the two into single else branch. Also add comments to explain the two conditions, which from Michael Chan and Vasundhara Volam. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxHerbert Xu
Merge mainline to pick up c7513c2a2714 ("crypto/arm64: aes-ce-gcm - add missing kernel_neon_begin/end pair").
2018-08-02RDMA/netdev: Use priv_destructor for netdev cleanupJason Gunthorpe
Now that the unregister_netdev flow for IPoIB no longer relies on external code we can now introduce the use of priv_destructor and needs_free_netdev. The rdma_netdev flow is switched to use the netdev common priv_destructor instead of the special free_rdma_netdev and the IPOIB ULP adjusted: - priv_destructor needs to switch to point to the ULP's destructor which will then call the rdma_ndev's in the right order - We need to be careful around the error unwind of register_netdev as it sometimes calls priv_destructor on failure - ULPs need to use ndo_init/uninit to ensure proper ordering of failures around register_netdev Switching to priv_destructor is a necessary pre-requisite to using the rtnl new_link mechanism. The VNIC user for rdma_netdev should also be revised, but that is left for another patch. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Denis Drozdov <denisd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-08-02xen-netback: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02drivers: net: lmc: fix case value for target abort errorColin Ian King
Current value for a target abort error is 0x010, however, this value should in fact be 0x002. As it stands, the range of error is 0..7 so it is currently never being detected. This bug has been in the driver since the early 2.6.12 days (or before). Detected by CoverityScan, CID#744290 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: hns: remove redundant variables 'max_frm' and 'tmp_mac_key'YueHaibing
Variables 'max_frm' and 'tmp_mac_key' are being assigned, but are never used,hence they are redundant and can be removed. fix fllowing warning: drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:461:6: warning: variable 'max_frm' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:1685:31: warning: variable 'tmp_mac_key' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:1855:41: warning: variable 'tmp_mac_key' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Add pm support to Broadcom iProc mdio mux driverArun Parameswaran
Add support for suspend and resume to the Broadcom iProc mdio mux driver. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Add support to configure clock in Broadcom iProc mdio muxArun Parameswaran
Add support to configure the internal rate adjust register based on the core clock supplied through device tree in the Broadcom iProc mdio mux. The operating frequency of the mdio mux block is 11MHz. This is derrived by dividing the clock to the mdio mux with the rate adjust register. In some SoC's the default values of the rate adjust register do not yield 11MHz. These SoC's are required to specify the clock via the device tree for proper operation. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Use devm api for mdio bus allocation in bcm iproc mdio muxArun Parameswaran
Use devm_mdiobus_alloc() instead of mdiobus_alloc() in the Broadcom iProc mdio mux driver. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Disable external master access in bcm mdio mux driverArun Parameswaran
Configure the scan control register in the Broadcom iProc mdio mux driver to disable access to external master. In some SoC's, the scan control register defaults to an incorrect value. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Fix the register offsets in Broadcom iProc mdio mux driverArun Parameswaran
Modify the register offsets in the Broadcom iProc mdio mux to start from the top of the register address space. Earlier, the base address pointed to the end of the block's register space. The base address will now point to the start of the mdio's address space. The offsets have been fixed to match this. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02qtnfmac: implement basic WoWLAN supportSergey Matyukevich
This patch implements basic WoWLAN support in qtnfmac driver, including processing of WoWLAN features reported by firmware and implementation of cfg80211 suspend/resume/wakeup callbacks. Currently the following WoWLAN triggers are supported: disconnect, magic packet, custom pattern packet. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: load firmware from mediatek subdirStanislaw Gruszka
Firmware blob will be located in mediatek subdirectory. Add "u" suffix to indicate this is USB device firmware. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: disable HW before probeStanislaw Gruszka
Disable HW before probe, otherwise after reboot we will fail to initialize MCU. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: Kconfig and Makefile for mt76x0 driverStanislaw Gruszka
Add Kconfig and Makefiles for mt76x0 driver. Now the driver can be build. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add more statesStanislaw Gruszka
Add states needed for mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: main fileStanislaw Gruszka
Add main file of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: dma and tx filesStanislaw Gruszka
Add dma and tx files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: trace and debugfs filesStanislaw Gruszka
Add trace and debugfs files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: eeprom filesStanislaw Gruszka
Add eeprom files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: init filesStanislaw Gruszka
Add init files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: phy filesStanislaw Gruszka
Add phy files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: mcu filesStanislaw Gruszka
Add mcu files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: usb filesStanislaw Gruszka
Add usb files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: mac filesStanislaw Gruszka
Add mac files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: core filesStanislaw Gruszka
Core files of mt76x0 driver. mt76x0 driver adds support for Mediatek MT7610U based USB Wi-Fi dongles. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add driver code for MT76x2u based devicesLorenzo Bianconi
MT76x2u is a 2x2 USB 802.11ac chipset by MediaTek. This driver currently support station mode Tested-by: <cug_yangyuancong@hotmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add usb support to mt76 layerLorenzo Bianconi
This will be used by drivers for MT76x2u based devices Tested-by: <cug_yangyuancong@hotmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: move mt76x2_debugfs in mt76-common moduleLorenzo Bianconi
Move mt76x2_debugfs code in mt76-common module since it is shared between mt76x2 and mt76x2u Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_phy_common to mt76x2-common moduleLorenzo Bianconi
Move phy related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_common to mt76x2-common moduleLorenzo Bianconi
Move core related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_init_common to mt76x2-common moduleLorenzo Bianconi
Move init related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_mac_common to mt76x2-common moduleLorenzo Bianconi
Move mac related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_tx_common to mt76x2-common moduleLorenzo Bianconi
Move tx related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: introduce mt76x2-common moduleLorenzo Bianconi
In order to remove usb dependency from pcie code, add mt76x2-common as a container of shared code between mt76x2 and mt76x2u. Add eeprom code to mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: introduce tx_queue_skb function pointer in mt76_bus_opsLorenzo Bianconi
Add tx_queue_skb function pointer in mt76_bus_ops since mt76x2u based devices do not map mt76x2_txwi on dma buffers and it is not possible to reuse mt76_dma_tx_queue_skb() routine to enqueue tx frames to hw buffers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: rename mt76_tx_queue_skb in mt76_dma_tx_queue_skbLorenzo Bianconi
Move mt76_dma_tx_queue_skb routine in dma.c. Remove static qualifier from mt76_get_txwi definition Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: add buffer len to mt76x2_mac_write_txwi signatureLorenzo Bianconi
Add frame length to mt76x2_mac_write_txwi routine signature and do not fetch it from skb since txwi data structure is added at the beginning of the skb for usb based devices and mt76x2_mac_write_txwi will be shared between pci and usb related code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: add napi struct to mt76_rx_poll_complete/mt76_rx_complete signaturesLorenzo Bianconi
in order to reuse mt76_rx_complete routine supporting mt76x2u based devices add napi struct to mt76_rx_poll_complete and mt76_rx_complete routine signatures and do not fetch it according to the rx queue index Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-13 01:59:11 +0000