summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-01-29mt76: mt7921: rely on mt76_connac_mcu module for suspend and WoW supportLorenzo Bianconi
Rely on mt76_connac_mcu module for suspend and WoW support and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: rely on mt76_connac_mcu module for sched_scan and hw_scanLorenzo Bianconi
Rely on mt76_connac_mcu module for sched_scan and hw_scan and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: rely on mt76_connac_mcu common libraryLorenzo Bianconi
Rely on mt76_connac_mcu common library and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: introduce PM supportSean Wang
Introduce suspend/resume and WoW (Wake-on-WoWLAN) support to mt7921 driver to allow remote wakeu-up from the suspend state. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: introduce beacon_loss mcu eventSean Wang
If device has enabled beacon hw filter rx beacons are not reported to the host. Introduce beacon_loss mcu event to trigger mac80211 mlme connection state machine in this configuration. IEEE80211_VIF_BEACON_FILTER has not set in vif flags since hw beacon filter is not enabled yet Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: introduce support for hardware beacon filterSean Wang
Introduce support for hw beacon filter available in the mt7921 firmware. According to mt7921e firmware, enabling hardware filter would rely on mt7921_mcu_uni_bss_bcnft and disabling hardware filter still rely on legacy mt7921_mcu_set_bss_pm. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: introduce 802.11 PS support in sta modeSean Wang
Enable 802.11 power-save support available in mt7921 firmware Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: introduce schedule scan supportSean Wang
introduce schedule scan to control mt7921 firmware to do background scan in defined plan to see if the matched SSID is available. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: add debugfs supportSean Wang
Add debugfs support to dump driver statistics and hardware details. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: introduce mt7921e supportSean Wang
Introduce support for mt7921e 802.11ax (Wi-Fi 6) 2x2:2SS chipset. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: add ieee80211_opsSean Wang
Filling ieee80211_ops with the mt7921 operations. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: add EEPROM supportSean Wang
Add EEPROM support to MT7921 to determine the capability the card has such as indentificaiton, MAC address, the band and antenna number the card able to support. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: add DMA supportSean Wang
Add DMA and register access support to MT7921e driver to set up the link for the data movement between the host and MT7921 MAC, or the host and MT7921 MCU. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: add MCU supportSean Wang
MT7921 contains a microprocessor with which the host can use command/event to communicate to implement offload features such as establish connection, hardware scan and so on. The host has to download the ROM patch, RAM firmware and finally activate the MCU to complete the MT7921 initialization. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: add MAC supportSean Wang
Add Rx packet description parsing, Tx packet description compositon, handle packet recycling and provide MAC information mt76 core needs to support mac80211. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29Fix "ordering" comment typosBjorn Helgaas
Fix comment typos in "ordering". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Vasily Gorbik <gor@linux.ibm.com> # s390
2021-01-29mt76: mt76_connac: move pm utility routines in mt76_connac_lib moduleLorenzo Bianconi
Move power_save common code shared between mt7663 and mt7921 in mt76_connac module Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt76_connac: move pm data struct in mt76_connac.hLorenzo Bianconi
Move pm mt7663 data structure in mt76_connac.h introducing mt76_connac_pm data struct. This is a preliminary patch to share pm code between mt7663 and mt7921 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt76_connac: move WoW and suspend code in mt76_connac_mcu moduleLorenzo Bianconi
Move WoW and suspend code in mt76_connac_mcu module in order to be reused in mt7615 and mt7921 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu moduleLorenzo Bianconi
Move hw_scan/sched_scan in mt76_connac_mcu module in order to be reused in mt7615 and mt7921 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt76_connac: create mcu libraryLorenzo Bianconi
Introduce mt76_connac common mcu library for code sharing between mt7615 and mt7921 devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: introduce mt76_vif data structureLorenzo Bianconi
Introduce mt76_vif data structure to share common fields between mt7615_vif and mt7921_vif and create a mcu common library Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29can: mcp251xfd: mcp251xfd_probe(): use dev_err_probe() to simplify error ↵Marc Kleine-Budde
handling dev_err_probe() can reduce code size, uniform error handling and record the defer probe reason etc., use it to simplify the code. Link: https://lore.kernel.org/r/20210128104644.2982125-9-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-29can: mcp251xfd: mcp251xfd_chip_clock_enable(): simplify returnMarc Kleine-Budde
This patch simplifies the return of the mcp251xfd_chip_clock_enable() function by direct returning the error. Link: https://lore.kernel.org/r/20210128104644.2982125-8-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-29can: mcp251xfd: add missing _MASK postfix to MCP251XFD_OBJ_FLAGS_DLCMarc Kleine-Budde
As MCP251XFD_OBJ_FLAGS_DLC is a mask, add the missing _MASK postfix, that all other masks in the driver have. Link: https://lore.kernel.org/r/20210128104644.2982125-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-29can: mcp251xfd: unify error messages and commetsMarc Kleine-Budde
This patch unifies the error messages: - have a "." and the end of each message - write controller with a small "c", if not the first word of an error message. Link: https://lore.kernel.org/r/20210128104644.2982125-6-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-29can: mcp251xfd: mcp251xfd_probe(): add imx6 to errata tableMarc Kleine-Budde
This patch adds an imx6 as known good to the errata table. Link: https://lore.kernel.org/r/20210128104644.2982125-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-29can: mcp251xfd: mcp251xfd_probe(): remove known bad combinations from errata ↵Marc Kleine-Budde
tabe The published errata specify the maximum allowed SPI frequency to be max 85% of (FSYSCLK/2). So there's no need to track known bad clock settings in the driver. As the setup of known good values is a bit tricky, keep them. Link: https://lore.kernel.org/r/20210128104644.2982125-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-29can: mcp251xfd: mcp251xfd_probe(): sort errata table alphabetically, fix ↵Marc Kleine-Budde
indention This patch sorts the errata table alphabetically and fixes the indention. Link: https://lore.kernel.org/r/20210128104644.2982125-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-29can: mcp251xfd: mcp251xfd_probe(): fix errata referenceMarc Kleine-Budde
This patch fixes the reference to the errata for both the mcp2517fd and the mcp2518fd. Fixes: f5b84dedf7eb ("can: mcp25xxfd: mcp25xxfd_probe(): add SPI clk limit related errata information") Link: https://lore.kernel.org/r/20210128104644.2982125-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-28octeontx2-af: Fix 'physical' typosBjorn Helgaas
Fix misspellings of "physical". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20210127181359.3008316-1-helgaas@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Use enum to encode notification typeIdo Schimmel
Currently there are only two types of in-kernel nexthop notification. The two are distinguished by the 'is_grp' boolean field in 'struct nh_notifier_info'. As more notification types are introduced for more next-hop group types, a boolean is not an easily extensible interface. Instead, convert it to an enum. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: ipa: don't pass size to ipa_cmd_transfer_add()Alex Elder
The only time we transfer data (rather than issuing a command) out of the AP->command TX endpoint is when we're clearing the hardware pipeline. All that's needed is a "small" data buffer, and its contents aren't even important. For convenience, we just transfer a command structure in this case (it's already mapped for DMA). The TRE is added to a transaction using ipa_cmd_ip_tag_status_add(), but we ignore the size value provided to that function. So just get rid of the size argument. Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: ipa: don't pass tag value to ipa_cmd_ip_tag_status_add()Alex Elder
We only send a tagged packet from the AP->command TX endpoint when we're clearing the hardware pipeline. And when we receive the tagged packet we don't care what the actual tag value is. Stop passing a tag value to ipa_cmd_ip_tag_status_add(), and just encode 0 as the tag sent. Fix the function that encodes the tag so it uses the proper byte ordering. Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: ipa: signal when tag transfer completesAlex Elder
There are times, such as when the modem crashes, when we issue commands to clear the IPA hardware pipeline. These commands include a data transfer command that delivers a small packet directly to the default (AP<-LAN RX) endpoint. The places that do this wait for the transactions that contain these commands to complete, but the pipeline can't be assumed clear until the sent packet has been *received*. The small transfer will be delivered with a status structure, and that status will indicate its tag is valid. This is the only place we send a tagged packet, so we use the tag to determine when the pipeline clear packet has arrived. Add a completion to the IPA structure to to be used to signal the receipt of a pipeline clear packet. Create a new function ipa_cmd_pipeline_clear_wait() that will wait for that completion. Reinitialize the completion whenever pipeline clear commands are added to a transaction. Extend ipa_endpoint_status_tag() to check whether a packet whose status contains a valid tag was sent from the AP->command TX endpoint, and if so, signal the new IPA completion. Have all callers of ipa_cmd_pipeline_clear_add() wait for the pipeline clear indication after the transaction that clears the pipeline has completed. Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: ipa: drop packet if status has valid tagAlex Elder
Introduce ipa_endpoint_status_tag(), which returns true if received status indicates its tag field is valid. The endpoint parameter is not yet used. Call this from ipa_status_drop_packet(), and drop the packet if the status indicates the tag was valid. Pass the endpoint pointer to ipa_status_drop_packet(), and rename it ipa_endpoint_status_drop(). The endpoint will be used in the next patch. Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: ipa: minor update to handling of packet with statusAlex Elder
Rearrange some comments and assignments made when handling a packet that is received with status, aiming to improve understandability. Use DIV_ROUND_CLOSEST() to get a better per-packet true size estimate. Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: ipa: rename "tag status" symbolsAlex Elder
There is a set of functions and symbols related to performing "tag_process" immediate commands to clear the IPA pipeline. The name is related to one of the commands issued when doing this, but it doesn't really convey the overall purpose of taking this action. The purpose is to take some steps to "clear out" the hardware pipeline, and to wait until that process completes, to ensure the IPA hardware is in a well-defined state. Rename these symbols to use "pipeline_clear" in their names instead. Add some comments to explain a bit more about what's going on. Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28lan743x: fix endianness when accessing descriptorsAlexey Denisov
TX/RX descriptor ring fields are always little-endian, but conversion wasn't performed for big-endian CPUs, so the driver failed to work. This patch makes the driver work on big-endian CPUs. It was tested and confirmed to work on NXP P1010 processor (PowerPC). Signed-off-by: Alexey Denisov <rtgbnm@gmail.com> Link: https://lore.kernel.org/r/20210128044859.280219-1-rtgbnm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28e100: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'e100_alloc()', GFP_KERNEL can be used because it is only called from the probe function and no lock is acquired. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Link: https://lore.kernel.org/r/20210128210736.749724-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: qmi_wwan: Add pass through modeSubash Abhinov Kasiviswanathan
Pass through mode is to allow packets in MAP format to be passed on to the stack. rmnet driver can be used to process and demultiplex these packets. Pass through mode can be enabled when the device is in raw ip mode only. Conversely, raw ip mode cannot be disabled when pass through mode is enabled. Userspace can use pass through mode in conjunction with rmnet driver through the following steps- 1. Enable raw ip mode on qmi_wwan device 2. Enable pass through mode on qmi_wwan device 3. Create a rmnet device with qmi_wwan device as real device using netlink Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/1611560015-20034-1-git-send-email-subashab@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: usb: qmi_wwan: add qmap id sysfs file for qmimux interfacesDaniele Palmas
Add qmimux interface sysfs file qmap/mux_id to show qmap id set during the interface creation, in order to provide a method for userspace to associate QMI control channels to network interfaces. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Acked-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28ipvlan: remove h from printk format specifierTom Rix
This change fixes the checkpatch warning described in this commit commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") Standard integer promotion is already done and %hx and %hhx is useless so do not encourage the use of %hh[xudi] or %h[xudi]. Cleanup output to use __func__ over explicit function strings. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20210124190804.1964580-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge tag 'mlx5-updates-2021-01-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 subfunction support Parav Pandit says: This patchset introduces support for mlx5 subfunction (SF). A subfunction is a lightweight function that has a parent PCI function on which it is deployed. mlx5 subfunction has its own function capabilities and its own resources. This means a subfunction has its own dedicated queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from the parent PCI function. When subfunction is RDMA capable, it has its own QP1, GID table and rdma resources neither shared nor stolen from the parent PCI function. A subfunction has dedicated window in PCI BAR space that is not shared with the other subfunctions or parent PCI function. This ensures that all class devices of the subfunction accesses only assigned PCI BAR space. A Subfunction supports eswitch representation through which it supports tc offloads. User must configure eswitch to send/receive packets from/to subfunction port. Subfunctions share PCI level resources such as PCI MSI-X IRQs with their other subfunctions and/or with its parent PCI function. Subfunction support is discussed in detail in RFC [1] and [2]. RFC [1] and extension [2] describes requirements, design and proposed plumbing using devlink, auxiliary bus and sysfs for systemd/udev support. Functionality of this patchset is best explained using real examples further below. overview: -------- A subfunction can be created and deleted by a user using devlink port add/delete interface. A subfunction can be configured using devlink port function attribute before its activated. When a subfunction is activated, it results in an auxiliary device on the host PCI device where it is deployed. A driver binds to the auxiliary device that further creates supported class devices. example subfunction usage sequence: ----------------------------------- Change device to switchdev mode: $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev Add a devlink port of subfunction flavour: $ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88 Configure mac address of the port function: $ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88 Now activate the function: $ devlink port function set ens2f0npf0sf88 state active Now use the auxiliary device and class devices: $ devlink dev show pci/0000:06:00.0 auxiliary/mlx5_core.sf.4 $ ip link show 127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff altname enp6s0f0np0 129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff $ rdma dev show 43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112 44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112 After use inactivate the function: $ devlink port function set ens2f0npf0sf88 state inactive Now delete the subfunction port: $ devlink port del ens2f0npf0sf88 [1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/ [2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2 ================= * tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Add devlink subfunction port documentation devlink: Extend devlink port documentation for subfunctions devlink: Add devlink port documentation net/mlx5: SF, Port function state change support net/mlx5: SF, Add port add delete functionality net/mlx5: E-switch, Add eswitch helpers for SF vport net/mlx5: E-switch, Prepare eswitch to handle SF vport net/mlx5: SF, Add auxiliary device driver net/mlx5: SF, Add auxiliary device support net/mlx5: Introduce vhca state event notifier devlink: Support get and set state of port function devlink: Support add and delete devlink port devlink: Introduce PCI SF port flavour and port attribute devlink: Prepare code to fill multiple port function attributes ==================== Link: https://lore.kernel.org/r/20210122193658.282884-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge tag 'net-5.11-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes including fixes from can, xfrm, wireless, wireless-drivers and netfilter trees. Nothing scary, Intel WiFi-related fixes seemed most notable to the users. Current release - regressions: - dsa: microchip: ksz8795: fix KSZ8794 port map again to program the CPU port correctly Current release - new code bugs: - iwlwifi: pcie: reschedule in long-running memory reads Previous releases - regressions: - iwlwifi: dbg: don't try to overwrite read-only FW data - iwlwifi: provide gso_type to GSO packets - octeontx2: make sure the buffer is 128 byte aligned - tcp: make TCP_USER_TIMEOUT accurate for zero window probes - xfrm: fix wraparound in xfrm_policy_addr_delta() - xfrm: fix oops in xfrm_replay_advance_bmp due to a race between CPUs in presence of packet reorder - tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN - wext: fix NULL-ptr-dereference with cfg80211's lack of commit() Previous releases - always broken: - igc: fix link speed advertising - stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing - team: protect features update by RCU to avoid deadlock - xfrm: fix disable_xfrm sysctl when used on xfrm interfaces themselves - fec: fix temporary RMII clock reset on link up - can: dev: prevent potential information leak in can_fill_info() Misc: - mrp: fix bad packing of MRP test packet structures - uapi: fix big endian definition of ipv6_rpl_sr_hdr - add David Ahern to IPv4/IPv6 maintainers" * tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits) rxrpc: Fix memory leak in rxrpc_lookup_local mlxsw: spectrum_span: Do not overwrite policer configuration selftests: forwarding: Specify interface when invoking mausezahn stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family. ibmvnic: Ensure that CRQ entry read are correctly ordered MAINTAINERS: add missing header for bonding net: decnet: fix netdev refcount leaking on error path net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP can: dev: prevent potential information leak in can_fill_info() net: fec: Fix temporary RMII clock reset on link up net: lapb: Add locking to the lapb module team: protect features update by RCU to avoid deadlock MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset net/mlx5e: Revert parameters on errors when changing trust state without reset net/mlx5e: Correctly handle changing the number of queues when the interface is down net/mlx5e: Fix CT rule + encap slow path offload and deletion net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled ...
2021-01-28net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber InstantPali Rohár
The Ubiquiti U-Fiber Instant SFP GPON module has nonsensical information stored in its EEPROM. It claims to support all transceiver types including 10G Ethernet. Clear all claimed modes and set only 1000baseX_Full, which is the only one supported. This module has also phys_id set to SFF, and the SFP subsystem currently does not allow to use SFP modules detected as SFFs. Add exception for this module so it can be detected as supported. This change finally allows to detect and use SFP GPON module Ubiquiti U-Fiber Instant on Linux system. EEPROM content of this SFP module is (where XX is serial number): 00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8 ???........??.?? 10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20 ....UBNT 20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41 .??)UF-INSTA 30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36 NT 4 ??.6 40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX .?..UBNTXXXXXXXX 50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41 140123 `??A Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: sfp: add workaround for Realtek RTL8672 and RTL9601C chipsPali Rohár
The workaround for VSOL V2801F brand based GPON SFP modules added in commit 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") works only for IDs added explicitly to the list. Since there are rebranded modules where OEM vendors put different strings into the vendor name field, we cannot base workaround on IDs only. Moreover the issue which the above mentioned commit tried to work around is generic not only to VSOL based modules, but rather to all GPON modules based on Realtek RTL8672 and RTL9601C chips. These include at least the following GPON modules: * V-SOL V2801F * C-Data FD511GX-RM0 * OPTON GP801R * BAUDCOM BD-1234-SFM * CPGOS03-0490 v2.0 * Ubiquiti U-Fiber Instant * EXOT EGS1 These Realtek chips have broken EEPROM emulator which for N-byte read operation returns just the first byte of EEPROM data, followed by N-1 zeros. Introduce a new function, sfp_id_needs_byte_io(), which detects SFP modules with broken EEPROM emulator based on N-1 zeros and switch to 1 byte EEPROM reading operation. Function sfp_i2c_read() now always uses single byte reading when it is required and when function sfp_hwmon_probe() detects single byte access, it disables registration of hwmon device, because in this case we cannot reliably and atomically read 2 bytes as is required by the standard for retrieving values from diagnostic area. (These Realtek chips are broken in a way that violates SFP standards for diagnostic interface. Kernel in this case simply cannot do anything less of skipping registration of the hwmon interface.) This patch fixes reading of EEPROM content from SFP modules based on Realtek RTL8672 and RTL9601C chips. Diagnostic interface of EEPROM stays broken and cannot be fixed. Fixes: 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") Co-developed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28mlxsw: spectrum_span: Do not overwrite policer configurationIdo Schimmel
The purpose of the delayed work in the SPAN module is to potentially update the destination port and various encapsulation parameters of SPAN agents that point to a VLAN device or a GRE tap. The destination port can change following the insertion of a new route, for example. SPAN agents that point to a physical port or the CPU port are static and never change throughout the lifetime of the SPAN agent. Therefore, skip over them in the delayed work. This fixes an issue where the delayed work overwrites the policer that was set on a SPAN agent pointing to the CPU. Modifying the delayed work to inherit the original policer configuration is error-prone, as the same will be needed for any new parameter. Fixes: 4039504e6a0c ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressingVoon Weifeng
Fix an issue where dump stack is printed and Reset Adapter occurs when PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use 32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing. [ 25.535095] ------------[ cut here ]------------ [ 25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out [ 25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260 [ 25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore [ 25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 5.11.0-rc4-intel-lts-MISMAIL5+ #5 [ 25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020 [ 25.659674] RIP: 0010:dev_watchdog+0x259/0x260 [ 25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7 [ 25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286 [ 25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103 [ 25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff [ 25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff [ 25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c [ 25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940 [ 25.731425] FS: 0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000 [ 25.740481] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0 [ 25.754900] Call Trace: [ 25.757631] <IRQ> [ 25.759891] ? qdisc_put_unlocked+0x30/0x30 [ 25.764565] ? qdisc_put_unlocked+0x30/0x30 [ 25.769245] call_timer_fn+0x2e/0x140 [ 25.773346] run_timer_softirq+0x1f3/0x430 [ 25.777932] ? __hrtimer_run_queues+0x12c/0x2c0 [ 25.783005] ? ktime_get+0x3e/0xa0 [ 25.786812] __do_softirq+0xa6/0x2ef [ 25.790816] asm_call_irq_on_stack+0xf/0x20 [ 25.795501] </IRQ> [ 25.797852] do_softirq_own_stack+0x5d/0x80 [ 25.802538] irq_exit_rcu+0x94/0xb0 [ 25.806475] sysvec_apic_timer_interrupt+0x42/0xc0 [ 25.811836] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370 [ 25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1 [ 25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206 [ 25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f [ 25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d [ 25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00 [ 25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0 [ 25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000 [ 25.889918] cpuidle_enter+0x29/0x40 [ 25.893922] do_idle+0x24a/0x290 [ 25.897536] cpu_startup_entry+0x19/0x20 [ 25.901930] start_secondary+0x128/0x160 [ 25.906326] secondary_startup_64_no_verify+0xb0/0xbb [ 25.911983] ---[ end trace b4c0c8195d0ba61f ]--- [ 25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter. Fixes: 67c08ac4140a ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID") Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-03 06:26:00 +0000