summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-02-02net/irda: sh_sir: Add SuperH IrDA driverKuninori Morimoto
This is very simple IrDA SIR driver for SuperH. This driver was tested by irdaping/ircp on SH7724 EcoVec24 board Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-01ath9k: fix access to freed data on unloadPavel Roskin
Calling ath_bus_cleanup() after ieee80211_free_hw() resulted in access to common->bus_ops, which is already freed as part of the device data. Remove the cleanup field in struct ath_bus_ops, as it was never used properly. Remove ath_bus_cleanup(). Merge cleanup functions in place of the ath_bus_cleanup() calls. Take care not to use any device data after ieee80211_free_hw(). Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ps3_gelic_wireless: Remove superfluous debug infoHamish Guthrie
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: implement setting RF sequenceRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add TX radio setup for newer PHYsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: fix Cal TX IQ LO for newer PHYsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add RSSI selection for newer PHYsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: split RSSI selection into two per-PHY-revision functionsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add workarounds for gain controlRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: update general workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ath9k: allocate string buffer in read_file_dma() by kmalloc()Pavel Roskin
Using stack for that causes warnings with CONFIG_FRAME_WARN=1024 Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ath: make gcc check format arguments of ath_print(), fix all misusesPavel Roskin
Numeric channel is hard to get, so it won't be printed. Replace Mhz with MHz on the affected lines and add commas as needed. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ps3_gelic_wireless: fix format warningJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-31tulip/xircom_cb.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME and xircom_cb from pr_<level> Convert embedded function names in logging messages to %s, __func__ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/winbond-840.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Convert %d.%d.%d.%d to %pI4 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/uli526x.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from logging messages Add do {} while(0) to ULI526X_DBUG macro Make SHOW_MEDIA_TYPE macro more readable Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/timer.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/pnic2.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/pnic.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/media.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/interrupt.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/eeprom.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/dmfe.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove 'DRV_NAME ": ' from logging messages Convert commented out printks to pr_debug Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/de2104x.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/21142.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip_core: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where appropriate Convert printks to pr_<level> Change print formats with %d.dx to %0dx Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-29iwlwifi: iwl_power_update_mode always hold mutexReinette Chatre
iwl_power_update_mode expects to be called with mutex held, for example to protect priv->vif. Only one caller currently does not do this, fix this. Also, add a comment to iwl_power_update_mode to indicate this requirement. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: fix typo in IWL_CCK_RATES_MASKJohannes Berg
Due to a typo, the variable contains OFDM rates as well. The only user doesn't care, so this change doesn't really do anything but fix up my confusion. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-01-29iwlwifi: remove unused work structsJohannes Berg
auth_work, calibrated_work, update_link_led and report_work are never used, so remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: remove bg_up workJohannes Berg
There's no need to queue a work struct from within a work struct, just move the code to execute directly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlagn: simplify ucode loadingJohannes Berg
Move the waiting into iwl5000_load_section instead of duplicating it in the caller. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: no need to test iw_mode in power savingJohannes Berg
mac80211 will only enable powersaving for station mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: update sensitivity calibration data for 1000 seriesWey-Yi Guy
Update sensitivity range values for 1000 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: update sensitivity calibration data for 5x00 seriesWey-Yi Guy
Update sensitivity range values for 5x00 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: update sensitivity calibration data for 6x00 seriesWey-Yi Guy
Update sensitivity range values for 6000 & 6x50 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: fix locking in iwl_mac_add_interfaceJohannes Berg
The corresponding iwl_mac_remove_interface only acquires the mutex, leading me to believe that the spinlock is not necessary. However, this doesn't actually acquire the mutex around the vif pointer check and assignment, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: sysassert identifier changeWey-Yi Guy
Change in uCode to include a unique identifier as part of sysassert, in order to tell the difference, add the "ADVANCED SYSASSERT" description when dump nic error to indicate the difference. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: optimize power savingDaniel Halperin
In hostap AP mode, every time the client sends the AP a packet the STA_NOTIFY_AWAKE code is sent from mac80211. This results in a command being sent to the uCode even if the client was not asleep. The following simple patch has fixed the issue for me without any degradation that I can find. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29ath9k: Handle full sleep in ps_restore.Vivek Natarajan
IDLE PS (Full Sleep) doesn't work when ifconfig up is done during Idle unassociated state. Fix this by restoring FULL SLEEP in ps_restore if CONF_IDLE is set. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-28cdc_ether: Partially revert "usbnet: Set link down initially ..."Ben Hutchings
Commit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71 ("usbnet: Set link down initially for drivers that update link state") changed the initial link state in cdc_ether and other drivers based on the understanding that the devices they support generate link change interrupts. However, this is optional in the CDC Ethernet protocol, and two users have reported in <http://bugzilla.kernel.org/show_bug.cgi?id=14791> that the link state for their devices remains down. Therefore, revert the change in cdc_ether. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Avi Rozen <avi.rozen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28be2net: Fix memset() arg ordering.David S. Miller
Noticed by Ben Hutchings. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28ps3_gelic_wireless: fix directed ssid scanHamish Guthrie
If the association worker requests a directed ssid scan and a bss list already exists, the directed scan is not done. This patch corrects this and cleans up a few typos and debug messages. Signed-off-by: Hamish Guthrie <hamish.guthrie@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-28ps3_gelic_wireless: Remove PS3 gelic legacy wpa supportHamish Guthrie
The current PS3 gelic wireless driver has support for wireless extensions. The original PS3 gelic wireless driver exposed a dedicated API for a dedicated wpa_supplicant driver. This old API could be enabled with CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE, however, as this is not being used by any distros, and it is being removed from the driver and from wpa_supplicant. Signed-off-by: Hamish Guthrie <hamish.guthrie@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-28net: merge fixup for qlge_mainStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-01-28netdev: remove HAVE_ leftoversAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28bonding: bond_open error return valuestephen hemminger
The convention for API functions in kernel is to return errno value; bond_open would return -1 if alb setup failed. The only reason that could happen is if kmalloc() failed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it earlyJohn Fastabend
Call ixgbe_copy_dcb_cfg() earlier in the ixgbe_dcbnl_set_all() so that we can learn if this is going to fail as early as possible. Previously, ixgbe_down or ixgbe_close were being called before this check and the IXGBE_RESETTING bit was being set and cleared. Worse if this failed the corresponding ixgbe_up/ndo_open would not called. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28ixgbe: set the correct DCB bit for pg tx settingsJohn Fastabend
Set the correct bit BIT_PG_TX when tx PG settings are set. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28igbvf: fix issue w/ mapped_as_page being left set after unmapAlexander Duyck
This change fixes an issue in igbvf with mapped_as_page being left set after a page is unmapped which results in buffers which are mapped via map single being unmapped as page. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 18:26:42 +0000