summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2025-04-17net: ti: icss-iep: Fix possible NULL pointer dereference for perout requestMeghana Malladi
The ICSS IEP driver tracks perout and pps enable state with flags. Currently when disabling pps and perout signals during icss_iep_exit(), results in NULL pointer dereference for perout. To fix the null pointer dereference issue, the icss_iep_perout_enable_hw function can be modified to directly clear the IEP CMP registers when disabling PPS or PEROUT, without referencing the ptp_perout_request structure, as its contents are irrelevant in this case. Fixes: 9b115361248d ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mountain/ Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-17net: ti: icssg-prueth: Fix possible NULL pointer dereference inside ↵Meghana Malladi
emac_xmit_xdp_frame() There is an error check inside emac_xmit_xdp_frame() function which is called when the driver wants to transmit XDP frame, to check if the allocated tx descriptor is NULL, if true to exit and return ICSSG_XDP_CONSUMED implying failure in transmission. In this case trying to free a descriptor which is NULL will result in kernel crash due to NULL pointer dereference. Fix this error handling and increase netdev tx_dropped stats in the caller of this function if the function returns ICSSG_XDP_CONSUMED. Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/70d8dd76-0c76-42fc-8611-9884937c82f5@stanley.mountain/ Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-3-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-17net: ti: icssg-prueth: Fix kernel warning while bringing down network interfaceMeghana Malladi
During network interface initialization, the NIC driver needs to register its Rx queue with the XDP, to ensure the incoming XDP buffer carries a pointer reference to this info and is stored inside xdp_rxq_info. While this struct isn't tied to XDP prog, if there are any changes in Rx queue, the NIC driver needs to stop the Rx queue by unregistering with XDP before purging and reallocating memory. Drop page_pool destroy during Rx channel reset as this is already handled by XDP during xdp_rxq_info_unreg (Rx queue unregister), failing to do will cause the following warning: warning logs: https://gist.github.com/MeghanaMalladiTI/eb627e5dc8de24e42d7d46572c13e576 Fixes: 46eeb90f03e0 ("net: ti: icssg-prueth: Use page_pool API for RX buffer allocation") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-2-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-16net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupportedVladimir Oltean
Russell King reports that on the ZII dev rev B, deleting a bridge VLAN from a user port fails with -ENOENT: https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/ This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(), which tries to find an MST entry in &chip->msts associated with the SID, but fails and returns -ENOENT as such. But we know that this chip does not support MST at all, so that is not surprising. The question is why does the guard in mv88e6xxx_mst_put() not exit early: if (!sid) return 0; And the answer seems to be simple: the sid comes from vlan.sid which supposedly was previously populated by mv88e6xxx_vtu_get(). But some chip->info->ops->vtu_getnext() implementations do not populate vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case, later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is just residual stack memory. Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge VLAN mapped to the default MSTI. For some chips, SID 0 is valid and installed by mv88e6xxx_stu_setup(). A chip which does not support the STU would implicitly only support mapping all VLANs to the default MSTI, so although SID 0 is not valid, it would be sufficient, if we were to zero-initialize the vlan structure, to fix the bug, due to the coincidence that a test for vlan.sid == 0 already exists and leads to the same (correct) behavior. Another option which would be sufficient would be to add a test for mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one which already exists in mv88e6xxx_mst_get(). But that placement means the caller will have to dereference vlan.sid, which means it will access uninitialized memory, which is not nice even if it ignores it later. So we end up making both modifications, in order to not rely just on the sid == 0 coincidence, but also to avoid having uninitialized structure fields which might get temporarily accessed. Fixes: acaf4d2e36b3 ("net: dsa: mv88e6xxx: MST Offloading") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250414212913.2955253-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never ↵Vladimir Oltean
registered Russell King reports that a system with mv88e6xxx dereferences a NULL pointer when unbinding this driver: https://lore.kernel.org/netdev/Z_lRkMlTJ1KQ0kVX@shell.armlinux.org.uk/ The crash seems to be in devlink_region_destroy(), which is not NULL tolerant but is given a NULL devlink global region pointer. At least on some chips, some devlink regions are conditionally registered since the blamed commit, see mv88e6xxx_setup_devlink_regions_global(): if (cond && !cond(chip)) continue; These are MV88E6XXX_REGION_STU and MV88E6XXX_REGION_PVT. If the chip does not have an STU or PVT, it should crash like this. To fix the issue, avoid unregistering those regions which are NULL, i.e. were skipped at mv88e6xxx_setup_devlink_regions_global() time. Fixes: 836021a2d0e0 ("net: dsa: mv88e6xxx: Export cross-chip PVT as devlink region") Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250414212850.2953957-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16net: txgbe: fix memory leak in txgbe_probe() error pathAbdun Nihaal
When txgbe_sw_init() is called, memory is allocated for wx->rss_key in wx_init_rss_key(). However, in txgbe_probe() function, the subsequent error paths after txgbe_sw_init() don't free the rss_key. Fix that by freeing it in error path along with wx->mac_table. Also change the label to which execution jumps when txgbe_sw_init() fails, because otherwise, it could lead to a double free for rss_key, when the mac_table allocation fails in wx_sw_init(). Fixes: 937d46ecc5f9 ("net: wangxun: add ethtool_ops for channel number") Reported-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250415032910.13139-1-abdun.nihaal@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16net: b53: enable BPDU reception for management portJonas Gorski
For STP to work, receiving BPDUs is essential, but the appropriate bit was never set. Without GC_RX_BPDU_EN, the switch chip will filter all BPDUs, even if an appropriate PVID VLAN was setup. Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Link: https://patch.msgid.link/20250414200434.194422-1-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16cxgb4: fix memory leak in cxgb4_init_ethtool_filters() error pathAbdun Nihaal
In the for loop used to allocate the loc_array and bmap for each port, a memory leak is possible when the allocation for loc_array succeeds, but the allocation for bmap fails. This is because when the control flow goes to the label free_eth_finfo, only the allocations starting from (i-1)th iteration are freed. Fix that by freeing the loc_array in the bmap allocation error path. Fixes: d915c299f1da ("cxgb4: add skeleton for ethtool n-tuple filters") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414170649.89156-1-abdun.nihaal@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15Merge tag 'linux-can-fixes-for-6.15-20250415' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2025-04-15 The first patch is by Davide Caratti and fixes the missing derement in the protocol inuse counter for the J1939 CAN protocol. The last patch is by Weizhao Ouyang and fixes a broken quirks check in the rockchip CAN-FD driver. * tag 'linux-can-fixes-for-6.15-20250415' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: rockchip_canfd: fix broken quirks checks can: fix missing decrement of j1939_proto.inuse_idx ==================== Link: https://patch.msgid.link/20250415103401.445981-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15eth: bnxt: fix missing ring index trim on error pathJakub Kicinski
Commit under Fixes converted tx_prod to be free running but missed masking it on the Tx error path. This crashes on error conditions, for example when DMA mapping fails. Fixes: 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250414143210.458625-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15net: ethernet: ti: am65-cpsw: fix port_np reference countingMichael Walle
A reference to the device tree node is stored in a private struct, thus the reference count has to be incremented. Also, decrement the count on device removal and in the error path. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250414083942.4015060-1-mwalle@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15octeontx2-pf: handle otx2_mbox_get_rsp errorsChenyuan Yang
Adding error pointer check after calling otx2_mbox_get_rsp(). This is similar to the commit bd3110bc102a ("octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c"). Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Fixes: 6c40ca957fe5 ("octeontx2-pf: Adds TC offload support") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250412183327.3550970-1-chenyuan0y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15net: ngbe: fix memory leak in ngbe_probe() error pathAbdun Nihaal
When ngbe_sw_init() is called, memory is allocated for wx->rss_key in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent error paths after ngbe_sw_init() don't free the rss_key. Fix that by freeing it in error path along with wx->mac_table. Also change the label to which execution jumps when ngbe_sw_init() fails, because otherwise, it could lead to a double free for rss_key, when the mac_table allocation fails in wx_sw_init(). Fixes: 02338c484ab6 ("net: ngbe: Initialize sw info and register netdev") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20250412154927.25908-1-abdun.nihaal@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-15can: rockchip_canfd: fix broken quirks checksWeizhao Ouyang
First get the devtype_data then check quirks. Fixes: bbdffb341498 ("can: rockchip_canfd: add quirk for broken CAN-FD support") Signed-off-by: Weizhao Ouyang <o451686892@gmail.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250324114416.10160-1-o451686892@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-04-15net/niu: Niu requires MSIX ENTRY_DATA fields touch before entry readsJonathan Currier
Fix niu_try_msix() to not cause a fatal trap on sparc systems. Set PCI_DEV_FLAGS_MSIX_TOUCH_ENTRY_DATA_FIRST on the struct pci_dev to work around a bug in the hardware or firmware. For each vector entry in the msix table, niu chips will cause a fatal trap if any registers in that entry are read before that entries' ENTRY_DATA register is written to. Testing indicates writes to other registers are not sufficient to prevent the fatal trap, however the value does not appear to matter. This only needs to happen once after power up, so simply rebooting into a kernel lacking this fix will NOT cause the trap. NON-RESUMABLE ERROR: Reporting on cpu 64 NON-RESUMABLE ERROR: TPC [0x00000000005f6900] <msix_prepare_msi_desc+0x90/0xa0> NON-RESUMABLE ERROR: RAW [4010000000000016:00000e37f93e32ff:0000000202000080:ffffffffffffffff NON-RESUMABLE ERROR: 0000000800000000:0000000000000000:0000000000000000:0000000000000000] NON-RESUMABLE ERROR: handle [0x4010000000000016] stick [0x00000e37f93e32ff] NON-RESUMABLE ERROR: type [precise nonresumable] NON-RESUMABLE ERROR: attrs [0x02000080] < ASI sp-faulted priv > NON-RESUMABLE ERROR: raddr [0xffffffffffffffff] NON-RESUMABLE ERROR: insn effective address [0x000000c50020000c] NON-RESUMABLE ERROR: size [0x8] NON-RESUMABLE ERROR: asi [0x00] CPU: 64 UID: 0 PID: 745 Comm: kworker/64:1 Not tainted 6.11.5 #63 Workqueue: events work_for_cpu_fn TSTATE: 0000000011001602 TPC: 00000000005f6900 TNPC: 00000000005f6904 Y: 00000000 Not tainted TPC: <msix_prepare_msi_desc+0x90/0xa0> g0: 00000000000002e9 g1: 000000000000000c g2: 000000c50020000c g3: 0000000000000100 g4: ffff8000470307c0 g5: ffff800fec5be000 g6: ffff800047a08000 g7: 0000000000000000 o0: ffff800014feb000 o1: ffff800047a0b620 o2: 0000000000000011 o3: ffff800047a0b620 o4: 0000000000000080 o5: 0000000000000011 sp: ffff800047a0ad51 ret_pc: 00000000005f7128 RPC: <__pci_enable_msix_range+0x3cc/0x460> l0: 000000000000000d l1: 000000000000c01f l2: ffff800014feb0a8 l3: 0000000000000020 l4: 000000000000c000 l5: 0000000000000001 l6: 0000000020000000 l7: ffff800047a0b734 i0: ffff800014feb000 i1: ffff800047a0b730 i2: 0000000000000001 i3: 000000000000000d i4: 0000000000000000 i5: 0000000000000000 i6: ffff800047a0ae81 i7: 00000000101888b0 I7: <niu_try_msix.constprop.0+0xc0/0x130 [niu]> Call Trace: [<00000000101888b0>] niu_try_msix.constprop.0+0xc0/0x130 [niu] [<000000001018f840>] niu_get_invariants+0x183c/0x207c [niu] [<00000000101902fc>] niu_pci_init_one+0x27c/0x2fc [niu] [<00000000005ef3e4>] local_pci_probe+0x28/0x74 [<0000000000469240>] work_for_cpu_fn+0x8/0x1c [<000000000046b008>] process_scheduled_works+0x144/0x210 [<000000000046b518>] worker_thread+0x13c/0x1c0 [<00000000004710e0>] kthread+0xb8/0xc8 [<00000000004060c8>] ret_from_fork+0x1c/0x2c [<0000000000000000>] 0x0 Kernel panic - not syncing: Non-resumable error. Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") Signed-off-by: Jonathan Currier <dullfire@yahoo.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241117234843.19236-3-dullfire@yahoo.com
2025-04-14Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== igc: Fix PTM timeout Christopher S M Hall says: There have been sporadic reports of PTM timeouts using i225/i226 devices These timeouts have been root caused to: 1) Manipulating the PTM status register while PTM is enabled and triggered 2) The hardware retrying too quickly when an inappropriate response is received from the upstream device The issue can be reproduced with the following: $ sudo phc2sys -R 1000 -O 0 -i tsn0 -m Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to quickly reproduce the issue. PHC2SYS exits with: "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction fails The first patch in this series also resolves an issue reported by Corinna Vinschen relating to kdump: This patch also fixes a hang in igc_probe() when loading the igc driver in the kdump kernel on systems supporting PTM. The igc driver running in the base kernel enables PTM trigger in igc_probe(). Therefore the driver is always in PTM trigger mode, except in brief periods when manually triggering a PTM cycle. When a crash occurs, the NIC is reset while PTM trigger is enabled. Due to a hardware problem, the NIC is subsequently in a bad busmaster state and doesn't handle register reads/writes. When running igc_probe() in the kdump kernel, the first register access to a NIC register hangs driver probing and ultimately breaks kdump. With this patch, igc has PTM trigger disabled most of the time, and the trigger is only enabled for very brief (10 - 100 us) periods when manually triggering a PTM cycle. Chances that a crash occurs during a PTM trigger are not zero, but extremly reduced. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: add lock preventing multiple simultaneous PTM transactions igc: cleanup PTP module if probe fails igc: handle the IGC_PTP_ENABLED flag correctly igc: move ktime snapshot into PTM retry loop igc: increase wait time before retrying PTM igc: fix PTM cycle trigger logic ==================== Link: https://patch.msgid.link/20250411162857.2754883-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix multiple phy_stop() issueJijie Shao
After detecting the np_link_fail exception, the driver attempts to fix the exception by using phy_stop() and phy_start() in the scheduled task. However, hbg_fix_np_link_fail() and .ndo_stop() may be concurrently executed. As a result, phy_stop() is executed twice, and the following Calltrace occurs: hibmcge 0000:84:00.2 enp132s0f2: Link is Down hibmcge 0000:84:00.2: failed to link between MAC and PHY, try to fix... ------------[ cut here ]------------ called from state HALTED WARNING: CPU: 71 PID: 23391 at drivers/net/phy/phy.c:1503 phy_stop... ... pc : phy_stop+0x138/0x180 lr : phy_stop+0x138/0x180 sp : ffff8000c76bbd40 x29: ffff8000c76bbd40 x28: 0000000000000000 x27: 0000000000000000 x26: ffff2020047358c0 x25: ffff202004735940 x24: ffff20200000e405 x23: ffff2020060e5178 x22: ffff2020060e4000 x21: ffff2020060e49c0 x20: ffff2020060e5170 x19: ffff20202538e000 x18: 0000000000000020 x17: 0000000000000000 x16: ffffcede02e28f40 x15: ffffffffffffffff x14: 0000000000000000 x13: 205d313933333254 x12: 5b5d393430303233 x11: ffffcede04555958 x10: ffffcede04495918 x9 : ffffcede0274fee0 x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001 x5 : 00000000002bffa8 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff20202e429480 Call trace: phy_stop+0x138/0x180 hbg_fix_np_link_fail+0x4c/0x90 [hibmcge] hbg_service_task+0xfc/0x148 [hibmcge] process_one_work+0x180/0x398 worker_thread+0x210/0x328 kthread+0xe0/0xf0 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- This patch adds the rtnl_lock to hbg_fix_np_link_fail() to ensure that other operations are not performed concurrently. In addition, np_link_fail exception can be fixed only when the PHY is link. Fixes: e0306637e85d ("net: hibmcge: Add support for mac link exception handling feature") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-8-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix not restore rx pause mac addr after reset issueJijie Shao
The MAC hardware supports receiving two types of pause frames from link partner. One is a pause frame with a destination address of 01:80:C2:00:00:01. The other is a pause frame whose destination address is the address of the hibmcge driver. 01:80:C2:00:00:01 is supported by default. In .ndo_set_mac_address(), the hibmcge driver calls .hbg_hw_set_rx_pause_mac_addr() to set its mac address as the destination address of the rx puase frame. Therefore, pause frames with two types of MAC addresses can be received. Currently, the rx pause addr does not restored after reset. As a result, pause frames whose destination address is the hibmcge driver address cannot be correctly received. This patch restores the configuration by calling .hbg_hw_set_rx_pause_mac_addr() after reset is complete. Fixes: 3f5a61f6d504 ("net: hibmcge: Add reset supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-7-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix the incorrect np_link fail state issue.Jijie Shao
In the debugfs file, the driver displays the np_link fail state based on the HBG_NIC_STATE_NP_LINK_FAIL. However, HBG_NIC_STATE_NP_LINK_FAIL is cleared in hbg_service_task() So, this value of np_link fail is always false. This patch directly reads the related register to display the real state. Fixes: e0306637e85d ("net: hibmcge: Add support for mac link exception handling feature") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-6-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix wrong mtu log issueJijie Shao
A dbg log is generated when the driver modifies the MTU, which is expected to trace the change of the MTU. However, the log is recorded after WRITE_ONCE(). At this time, netdev->mtu has been changed to the new value. As a result, netdev->mtu is the same as new_mtu. This patch modifies the log location and records logs before WRITE_ONCE(). Fixes: ff4edac6e9bd ("net: hibmcge: Implement some .ndo functions") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix the share of irq statistics among different network ports ↵Jijie Shao
issue hbg_irqs is a global array which contains irq statistics. However, the irq statistics of different network ports point to the same global array. As a result, the statistics are incorrect. This patch allocates a statistics array for each network port to prevent the statistics of different network ports from affecting each other. irq statistics are removed from hbg_irq_info. Therefore, all data in hbg_irq_info remains unchanged. Therefore, the input parameter of some functions is changed to const. Fixes: 4d089035fa19 ("net: hibmcge: Add interrupt supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix incorrect multicast filtering issueJijie Shao
The driver does not support multicast filtering, the mask must be set to 0xFFFFFFFF. Otherwise, incorrect filtering occurs. This patch fixes this problem. Fixes: 37b367d60d0f ("net: hibmcge: Add unicast frame filter supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix incorrect pause frame statistics issueJijie Shao
The driver supports pause frames, but does not pass pause frames based on rx pause enable configuration, resulting in incorrect pause frame statistics. like this: mz eno3 '01 80 c2 00 00 01 00 18 2d 04 00 9c 88 08 00 01 ff ff' \ -p 64 -c 100 ethtool -S enp132s0f2 | grep -v ": 0" NIC statistics: rx_octets_total_filt_cnt: 6800 rx_filt_pkt_cnt: 100 The rx pause frames are filtered by the MAC hardware. This patch configures pass pause frames based on the rx puase enable status to ensure that rx pause frames are not filtered. mz eno3 '01 80 c2 00 00 01 00 18 2d 04 00 9c 88 08 00 01 ff ff' \ -p 64 -c 100 ethtool --include-statistics -a enp132s0f2 Pause parameters for enp132s0f2: Autonegotiate: on RX: on TX: on RX negotiated: on TX negotiated: on Statistics: tx_pause_frames: 0 rx_pause_frames: 100 Fixes: 3a03763f3876 ("net: hibmcge: Add pauseparam supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11bonding: hold ops lock around get_linkStanislav Fomichev
syzbot reports a case of ethtool_ops->get_link being called without ops lock: ethtool_op_get_link+0x15/0x60 net/ethtool/ioctl.c:63 bond_check_dev_link+0x1fb/0x4b0 drivers/net/bonding/bond_main.c:864 bond_miimon_inspect drivers/net/bonding/bond_main.c:2734 [inline] bond_mii_monitor+0x49d/0x3170 drivers/net/bonding/bond_main.c:2956 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xac3/0x18e0 kernel/workqueue.c:3319 worker_thread+0x870/0xd50 kernel/workqueue.c:3400 kthread+0x7b7/0x940 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Commit 04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE") changed to lockless __linkwatch_sync_dev in ethtool_op_get_link. All paths except bonding are coming via locked ioctl. Add necessary locking to bonding. Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reported-by: syzbot+48c14f61594bdfadb086@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=48c14f61594bdfadb086 Fixes: 04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE") Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250410161117.3519250-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11pds_core: fix memory leak in pdsc_debugfs_add_qcq()Abdun Nihaal
The memory allocated for intr_ctrl_regset, which is passed to debugfs_create_regset32() may not be cleaned up when the driver is removed. Fix that by using device managed allocation for it. Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20250409054450.48606-1-abdun.nihaal@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11Merge tag 'wireless-2025-04-11' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Just a handful of fixes, notably - iwlwifi: various build warning fixes (e.g. PM_SLEEP) - iwlwifi: fix operation when FW reset handshake times out - mac80211: drop pending frames on interface down * tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()" wifi: iwlwifi: mld: Restart firmware on iwl_mld_no_wowlan_resume() error wifi: iwlwifi: pcie: set state to no-FW before reset handshake wifi: wl1251: fix memory leak in wl1251_tx_work wifi: brcmfmac: fix memory leak in brcmf_get_module_param wifi: iwlwifi: mld: silence uninitialized variable warning wifi: mac80211: Purge vif txq in ieee80211_do_stop() wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue() wifi: at76c50x: fix use after free access in at76_disconnect wifi: add wireless list to MAINTAINERS iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled wifi: iwlwifi: mld: fix PM_SLEEP -Wundef warning wifi: iwlwifi: mld: reduce scope for uninitialized variable ==================== Link: https://patch.msgid.link/20250411142354.24419-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11igc: add lock preventing multiple simultaneous PTM transactionsChristopher S M Hall
Add a mutex around the PTM transaction to prevent multiple transactors Multiple processes try to initiate a PTM transaction, one or all may fail. This can be reproduced by running two instances of the following: $ sudo phc2sys -O 0 -i tsn0 -m PHC2SYS exits with: "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction fails Note: Normally two instance of PHC2SYS will not run, but one process should not break another. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11igc: cleanup PTP module if probe failsChristopher S M Hall
Make sure that the PTP module is cleaned up if the igc_probe() fails by calling igc_ptp_stop() on exit. Fixes: d89f88419f99 ("igc: Add skeletal frame for Intel(R) 2.5G Ethernet Controller support") Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11igc: handle the IGC_PTP_ENABLED flag correctlyChristopher S M Hall
All functions in igc_ptp.c called from igc_main.c should check the IGC_PTP_ENABLED flag. Adding check for this flag to stop and reset functions. Fixes: 5f2958052c58 ("igc: Add basic skeleton for PTP") Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11igc: move ktime snapshot into PTM retry loopChristopher S M Hall
Move ktime_get_snapshot() into the loop. If a retry does occur, a more recent snapshot will result in a more accurate cross-timestamp. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11igc: increase wait time before retrying PTMChristopher S M Hall
The i225/i226 hardware retries if it receives an inappropriate response from the upstream device. If the device retries too quickly, the root port does not respond. The wait between attempts was reduced from 10us to 1us in commit 6b8aa753a9f9 ("igc: Decrease PTM short interval from 10 us to 1 us"), which said: With the 10us interval, we were seeing PTM transactions take around 12us. Hardware team suggested this interval could be lowered to 1us which was confirmed with PCIe sniffer. With the 1us interval, PTM dialogs took around 2us. While a 1us short cycle time was thought to be theoretically sufficient, it turns out in practice it is not quite long enough. It is unclear if the problem is in the root port or an issue in i225/i226. Increase the wait from 1us to 4us. Increasing to 2us appeared to work in practice on the setups we have available. A value of 4us was chosen due to the limited hardware available for testing, with a goal of ensuring we wait long enough without overly penalizing the response time when unnecessary. The issue can be reproduced with the following: $ sudo phc2sys -R 1000 -O 0 -i tsn0 -m Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to quickly reproduce the issue. PHC2SYS exits with: "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction fails Fixes: 6b8aa753a9f9 ("igc: Decrease PTM short interval from 10 us to 1 us") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11igc: fix PTM cycle trigger logicChristopher S M Hall
Writing to clear the PTM status 'valid' bit while the PTM cycle is triggered results in unreliable PTM operation. To fix this, clear the PTM 'trigger' and status after each PTM transaction. The issue can be reproduced with the following: $ sudo phc2sys -R 1000 -O 0 -i tsn0 -m Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to quickly reproduce the issue. PHC2SYS exits with: "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction fails This patch also fixes a hang in igc_probe() when loading the igc driver in the kdump kernel on systems supporting PTM. The igc driver running in the base kernel enables PTM trigger in igc_probe(). Therefore the driver is always in PTM trigger mode, except in brief periods when manually triggering a PTM cycle. When a crash occurs, the NIC is reset while PTM trigger is enabled. Due to a hardware problem, the NIC is subsequently in a bad busmaster state and doesn't handle register reads/writes. When running igc_probe() in the kdump kernel, the first register access to a NIC register hangs driver probing and ultimately breaks kdump. With this patch, igc has PTM trigger disabled most of the time, and the trigger is only enabled for very brief (10 - 100 us) periods when manually triggering a PTM cycle. Chances that a crash occurs during a PTM trigger are not 0, but extremely reduced. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Corinna Vinschen <vinschen@redhat.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11wifi: iwlwifi: mld: Restart firmware on iwl_mld_no_wowlan_resume() errorLukas Wunner
Commit 44605365f935 ("iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled") sought to fix build breakage, but inadvertently introduced a new issue: iwl_mld_mac80211_start() no longer calls iwl_mld_start_fw() after having called iwl_mld_stop_fw() in the error path of iwl_mld_no_wowlan_resume(). Fix it. Fixes: 44605365f935 ("iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled") Reported-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Closes: https://lore.kernel.org/r/MW5PR11MB58106D6BC6403845C330C7AAA3A22@MW5PR11MB5810.namprd11.prod.outlook.com/ Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/d3ba1006a1b72ceb58c593fa62b9bd7c73e2e4ed.1744366815.git.lukas@wunner.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-11wifi: iwlwifi: pcie: set state to no-FW before reset handshakeJohannes Berg
The reset handshake attempts to kill the firmware, and it'll go into a pretty much dead state once we do that. However, if it times out, then we'll attempt to dump the firmware to be able to see why it didn't respond. During this dump, we cannot treat it as if it was still running, since we just tried to kill it, otherwise dumping will attempt to send a DBGC stop command. As this command will time out, we'll go into a reset loop. For now, fix this by setting the trans->state to say firmware isn't running before doing the reset handshake. In the longer term, we should clean up the way this state is handled. It's not entirely clear but it seems likely that this issue was introduced by my rework of the error handling, prior to that it would've been synchronous at that point and (I think) not have attempted to reset since it was already doing down. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219967 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219968 Fixes: 7391b2a4f7db ("wifi: iwlwifi: rework firmware error handling") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250411104054.63aa4f56894d.Ife70cfe997db03f0d07fdef2b164695739a05a63@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-10Merge tag 'net-6.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - core: hold instance lock during NETDEV_CHANGE - rtnetlink: fix bad unlock balance in do_setlink() - ipv6: - fix null-ptr-deref in addrconf_add_ifaddr() - align behavior across nexthops during path selection Previous releases - regressions: - sctp: prevent transport UaF in sendmsg - mptcp: only inc MPJoinAckHMacFailure for HMAC failures Previous releases - always broken: - sched: - make ->qlen_notify() idempotent - ensure sufficient space when sending filter netlink notifications - sch_sfq: really don't allow 1 packet limit - netfilter: fix incorrect avx2 match of 5th field octet - tls: explicitly disallow disconnect - eth: octeontx2-pf: fix VF root node parent queue priority" * tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits) ethtool: cmis_cdb: Fix incorrect read / write length extension selftests: netfilter: add test case for recent mismatch bug nft_set_pipapo: fix incorrect avx2 match of 5th field octet net: ppp: Add bound checking for skb data on ppp_sync_txmung net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod. ipv6: Align behavior across nexthops during path selection net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend() selftests/tc-testing: sfq: check that a derived limit of 1 is rejected net_sched: sch_sfq: move the limit validation net_sched: sch_sfq: use a temporary work area for validating configuration net: libwx: handle page_pool_dev_alloc_pages error selftests: mptcp: validate MPJoin HMacFailure counters mptcp: only inc MPJoinAckHMacFailure for HMAC failures rtnetlink: Fix bad unlock balance in do_setlink(). net: ethtool: Don't call .cleanup_data when prepare_data fails tc: Ensure we have enough buffer space when sending filter netlink notifications net: libwx: Fix the wrong Rx descriptor field octeontx2-pf: qos: fix VF root node parent queue index selftests: tls: check that disconnect does nothing ...
2025-04-10net: ppp: Add bound checking for skb data on ppp_sync_txmungArnaud Lecomte
Ensure we have enough data in linear buffer from skb before accessing initial bytes. This prevents potential out-of-bounds accesses when processing short packets. When ppp_sync_txmung receives an incoming package with an empty payload: (remote) gef➤ p *(struct pppoe_hdr *) (skb->head + skb->network_header) $18 = { type = 0x1, ver = 0x1, code = 0x0, sid = 0x2, length = 0x0, tag = 0xffff8880371cdb96 } from the skb struct (trimmed) tail = 0x16, end = 0x140, head = 0xffff88803346f400 "4", data = 0xffff88803346f416 ":\377", truesize = 0x380, len = 0x0, data_len = 0x0, mac_len = 0xe, hdr_len = 0x0, it is not safe to access data[2]. Reported-by: syzbot+29fc8991b0ecb186cf40@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=29fc8991b0ecb186cf40 Tested-by: syzbot+29fc8991b0ecb186cf40@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com> Link: https://patch.msgid.link/20250408-bound-checking-ppp_txmung-v2-1-94bb6e1b92d0@arnaud-lcm.com [pabeni@redhat.com: fixed subj typo] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-09net: phy: allow MDIO bus PM ops to start/stop state machine for ↵Vladimir Oltean
phylink-controlled PHY DSA has 2 kinds of drivers: 1. Those who call dsa_switch_suspend() and dsa_switch_resume() from their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz 2. Those who don't: all others. The above methods should be optional. For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(), and dsa_switch_resume() calls dsa_user_resume() -> phylink_start(). These seem good candidates for setting mac_managed_pm = true because that is essentially its definition [1], but that does not seem to be the biggest problem for now, and is not what this change focuses on. Talking strictly about the 2nd category of DSA drivers here (which do not have MAC managed PM, meaning that for their attached PHYs, mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full), I have noticed that the following warning from mdio_bus_phy_resume() is triggered: WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY && phydev->state != PHY_UP); because the PHY state machine is running. It's running as a result of a previous dsa_user_open() -> ... -> phylink_start() -> phy_start() having been initiated by the user. The previous mdio_bus_phy_suspend() was supposed to have called phy_stop_machine(), but it didn't. So this is why the PHY is in state PHY_NOLINK by the time mdio_bus_phy_resume() runs. mdio_bus_phy_suspend() did not call phy_stop_machine() because for phylink, the phydev->adjust_link function pointer is NULL. This seems a technicality introduced by commit fddd91016d16 ("phylib: fix PAL state machine restart on resume"). That commit was written before phylink existed, and was intended to avoid crashing with consumer drivers which don't use the PHY state machine - phylink always does, when using a PHY. But phylink itself has historically not been developed with suspend/resume in mind, and apparently not tested too much in that scenario, allowing this bug to exist unnoticed for so long. Plus, prior to the WARN_ON(), it would have likely been invisible. This issue is not in fact restricted to type 2 DSA drivers (according to the above ad-hoc classification), but can be extrapolated to any MAC driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where the issue was reported. Assuming mac_managed_pm is set correctly, a quick search indicates the following other drivers might be affected: $ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm drivers/net/ethernet/atheros/ag71xx.c drivers/net/ethernet/microchip/sparx5/sparx5_main.c drivers/net/ethernet/microchip/lan966x/lan966x_main.c drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c drivers/net/ethernet/freescale/dpaa/dpaa_eth.c drivers/net/ethernet/freescale/ucc_geth.c drivers/net/ethernet/freescale/enetc/enetc_pf_common.c drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c drivers/net/ethernet/marvell/mvneta.c drivers/net/ethernet/marvell/prestera/prestera_main.c drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/altera/altera_tse_main.c drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c drivers/net/ethernet/meta/fbnic/fbnic_phylink.c drivers/net/ethernet/tehuti/tn40_phy.c drivers/net/ethernet/mscc/ocelot_net.c Make the existing conditions dependent on the PHY device having a phydev->phy_link_change() implementation equal to the default phy_link_change() provided by phylib. Otherwise, we implicitly know that the phydev has the phylink-provided phylink_phy_change() callback, and when phylink is used, the PHY state machine always needs to be stopped/ started on the suspend/resume path. The code is structured as such that if phydev->phy_link_change() is absent, it is a matter of time until the kernel will crash - no need to further complicate the test. Thus, for the situation where the PM is not managed by the MAC, we will make the MDIO bus PM ops treat identically the phylink-controlled PHYs with the phylib-controlled PHYs where an adjust_link() callback is supplied. In both cases, the MDIO bus PM ops should stop and restart the PHY state machine. [1] https://lore.kernel.org/netdev/Z-1tiW9zjcoFkhwc@shell.armlinux.org.uk/ Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Reported-by: Wei Fang <wei.fang@nxp.com> Tested-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250407094042.2155633-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()Vladimir Oltean
In an upcoming change, mdio_bus_phy_may_suspend() will need to distinguish a phylib-based PHY client from a phylink PHY client. For that, it will need to compare the phydev->phy_link_change() function pointer with the eponymous phy_link_change() provided by phylib. To avoid forward function declarations, the default PHY link state change method should be moved upwards. There is no functional change associated with this patch, it is only to reduce the noise from a real bug fix. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250407093900.2155112-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-08net: libwx: handle page_pool_dev_alloc_pages errorChenyuan Yang
page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page) but it would still proceed to use the NULL pointer and then crash. This is similar to commit 001ba0902046 ("net: fec: handle page_pool_dev_alloc_pages error"). This is found by our static analysis tool KNighter. Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250407184952.2111299-1-chenyuan0y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-08Merge tag 'crc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull CRC cleanups from Eric Biggers: "Finish cleaning up the CRC kconfig options by removing the remaining unnecessary prompts and an unnecessary 'default y', removing CONFIG_LIBCRC32C, and documenting all the CRC library options" * tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: lib/crc: remove CONFIG_LIBCRC32C lib/crc: document all the CRC library kconfig options lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF lib/crc: remove unnecessary prompt for CONFIG_CRC16 lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
2025-04-08net: libwx: Fix the wrong Rx descriptor fieldJiawen Wu
WX_RXD_IPV6EX was incorrectly defined in Rx ring descriptor. In fact, this field stores the 802.1ad ID from which the packet was received. The wrong definition caused the statistics rx_csum_offload_errors to fail to grow when receiving the 802.1ad packet with incorrect checksum. Fixes: ef4f3c19f912 ("net: wangxun: libwx add rx offload functions") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/20250407103322.273241-1-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08octeontx2-pf: qos: fix VF root node parent queue indexHariprasad Kelam
The current code configures the Physical Function (PF) root node at TL1 and the Virtual Function (VF) root node at TL2. This ensure at any given point of time PF traffic gets more priority. PF root node TL1 / \ TL2 TL2 VF root node / \ TL3 TL3 / \ TL4 TL4 / \ SMQ SMQ Due to a bug in the current code, the TL2 parent queue index on the VF interface is not being configured, leading to 'SMQ Flush' errors Fixes: 5e6808b4c68d ("octeontx2-pf: Add support for HTB offload") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250407070341.2765426-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-05treewide: Convert new and leftover hrtimer_init() usersThomas Gleixner
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Coccinelle scripted cleanup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-04-04lib/crc: remove CONFIG_LIBCRC32CEric Biggers
Now that LIBCRC32C does nothing besides select CRC32, make every option that selects LIBCRC32C instead select CRC32 directly. Then remove LIBCRC32C. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250401221600.24878-8-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2025-04-04Merge tag 'net-6.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - four fixes for the netdev per-instance locking Current release - new code bugs: - consolidate more code between existing Rx zero-copy and uring so that the latter doesn't miss / have to duplicate the safety checks Previous releases - regressions: - ipv6: fix omitted Netlink attributes when using SKIP_STATS Previous releases - always broken: - net: fix geneve_opt length integer overflow - udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it approaches INT_MAX - dsa: mvpp2: add a lock to avoid corruption of the shared TCAM - dsa: airoha: fix issues with traffic QoS configuration / offload, and flow table offload Misc: - touch up the Netlink YAML specs of old families to make them usable for user space C codegen" * tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits) selftests: net: amt: indicate progress in the stress test netlink: specs: rt_route: pull the ifa- prefix out of the names netlink: specs: rt_addr: pull the ifa- prefix out of the names netlink: specs: rt_addr: fix get multi command name netlink: specs: rt_addr: fix the spec format / schema failures net: avoid false positive warnings in __net_mp_close_rxq() net: move mp dev config validation to __net_mp_open_rxq() net: ibmveth: make veth_pool_store stop hanging arcnet: Add NULL check in com20020pci_probe() ipv6: Do not consider link down nexthops in path selection ipv6: Start path selection from the first nexthop usbnet:fix NPE during rx_complete net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROP net: fix geneve_opt length integer overflow io_uring/zcrx: fix selftests w/ updated netdev Python helpers selftests: net: use netdevsim in netns test docs: net: document netdev notifier expectations net: dummy: request ops lock netdevsim: add dummy device notifiers net: rename rtnl_net_debug to lock_debug ...
2025-04-04net: ibmveth: make veth_pool_store stop hangingDave Marquardt
v2: - Created a single error handling unlock and exit in veth_pool_store - Greatly expanded commit message with previous explanatory-only text Summary: Use rtnl_mutex to synchronize veth_pool_store with itself, ibmveth_close and ibmveth_open, preventing multiple calls in a row to napi_disable. Background: Two (or more) threads could call veth_pool_store through writing to /sys/devices/vio/30000002/pool*/*. You can do this easily with a little shell script. This causes a hang. I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new kernel. I ran this test again and saw: Setting pool0/active to 0 Setting pool1/active to 1 [ 73.911067][ T4365] ibmveth 30000002 eth0: close starting Setting pool1/active to 1 Setting pool1/active to 0 [ 73.911367][ T4366] ibmveth 30000002 eth0: close starting [ 73.916056][ T4365] ibmveth 30000002 eth0: close complete [ 73.916064][ T4365] ibmveth 30000002 eth0: open starting [ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds. [ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8 [ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000 [ 243.683852][ T123] Call Trace: [ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable) [ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0 [ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0 [ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210 [ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50 [ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0 [ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60 [ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc [ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270 [ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0 [ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0 [ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650 [ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150 [ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340 [ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec ... [ 243.684087][ T123] Showing all locks held in the system: [ 243.684095][ T123] 1 lock held by khungtaskd/123: [ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248 [ 243.684114][ T123] 4 locks held by stress.sh/4365: [ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60 [ 243.684166][ T123] 5 locks held by stress.sh/4366: [ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684183][ T123] #1: c00000000aee2288 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684194][ T123] #2: c0000000366f4ba8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684205][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_disable+0x30/0x60 [ 243.684216][ T123] #4: c0000003ff9bbf18 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x138/0x12a0 From the ibmveth debug, two threads are calling veth_pool_store, which calls ibmveth_close and ibmveth_open. Here's the sequence: T4365 T4366 ----------------- ----------------- --------- veth_pool_store veth_pool_store ibmveth_close ibmveth_close napi_disable napi_disable ibmveth_open napi_enable <- HANG ibmveth_close calls napi_disable at the top and ibmveth_open calls napi_enable at the top. https://docs.kernel.org/networking/napi.html]] says The control APIs are not idempotent. Control API calls are safe against concurrent use of datapath APIs but an incorrect sequence of control API calls may result in crashes, deadlocks, or race conditions. For example, calling napi_disable() multiple times in a row will deadlock. In the normal open and close paths, rtnl_mutex is acquired to prevent other callers. This is missing from veth_pool_store. Use rtnl_mutex in veth_pool_store fixes these hangs. Signed-off-by: Dave Marquardt <davemarq@linux.ibm.com> Fixes: 860f242eb534 ("[PATCH] ibmveth change buffer pools dynamically") Reviewed-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250402154403.386744-1-davemarq@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-04arcnet: Add NULL check in com20020pci_probe()Henry Martin
devm_kasprintf() returns NULL when memory allocation fails. Currently, com20020pci_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensure no resources are left allocated. Fixes: 6b17a597fc2f ("arcnet: restoring support for multiple Sohard Arcnet cards") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://patch.msgid.link/20250402135036.44697-1-bsdhenrymartin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-04usbnet:fix NPE during rx_completeYing Lu
Missing usbnet_going_away Check in Critical Path. The usb_submit_urb function lacks a usbnet_going_away validation, whereas __usbnet_queue_skb includes this check. This inconsistency creates a race condition where: A URB request may succeed, but the corresponding SKB data fails to be queued. Subsequent processes: (e.g., rx_complete → defer_bh → __skb_unlink(skb, list)) attempt to access skb->next, triggering a NULL pointer dereference (Kernel Panic). Fixes: 04e906839a05 ("usbnet: fix cyclical race on disconnect with work queue") Cc: stable@vger.kernel.org Signed-off-by: Ying Lu <luying1@xiaomi.com> Link: https://patch.msgid.link/4c9ef2efaa07eb7f9a5042b74348a67e5a3a7aea.1743584159.git.luying1@xiaomi.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-04net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROPLorenzo Bianconi
In the current implementation octeontx2 manages XDP_ABORTED and XDP invalid as XDP_PASS forwarding the skb to the networking stack. Align the behaviour to other XDP drivers handling XDP_ABORTED and XDP invalid as XDP_DROP. Please note this patch has just compile tested. Fixes: 06059a1a9a4a5 ("octeontx2-pf: Add XDP support to netdev PF") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250401-octeontx2-xdp-abort-fix-v1-1-f0587c35a0b9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-01 10:46:25 +0000