| Age | Commit message (Collapse) | Author |
|---|
|
Select the TX power tracking tables for RF paths C and D as well.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/e1e532c9-8733-4ec8-84fe-ced4af6c08da@gmail.com
|
|
Record statistics for the 3SS rates too.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/39e3c7cf-37ed-4c0e-af00-dcd9eab351f0@gmail.com
|
|
Set the MCS maps and the highest rates according to the number of
spatial streams the chip has. For RTL8814AU that is 3.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/e86aa009-b5bf-4b3a-8112-ea5e3cd49465@gmail.com
|
|
Set the RX mask and the highest RX rate according to the number of
spatial streams the chip can receive. For RTL8814AU that is 3.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/4e786f50-ed1c-4387-8b28-e6ff00e35e81@gmail.com
|
|
This function translates the rate number reported by the hardware into
something mac80211 can understand. It was ignoring the 3SS and 4SS HT
rates. Translate them too.
Also set *nss to 0 for the HT rates, just to make sure it's
initialised.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/d0a5a86b-4869-47f6-a5a7-01c0f987cc7f@gmail.com
|
|
rtw_mac_power_switch() checks bit 8 of REG_SYS_STATUS1 to see if the
chip is powered on. This bit appears to be always on in the RTL8814AU,
so ignore it.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/2f0fcffb-3067-4d95-a68c-f2f3a5a47921@gmail.com
|
|
Check size of struct mfw_hdr within firmware->size before type casting
to ensure to validly dereference fields from mfm_hdr pointer. Then,
check if signature field is equal to RTW89_MFW_SIG to assert current
is multi-firmware.
Addresses-Coverity-ID: 1494046 ("Untrusted loop bound")
Addresses-Coverity-ID: 1544385 ("Untrusted array index read")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217064308.43559-6-pkshih@realtek.com
|
|
If failed to load a non-secure firmware with a secure chip, it only throws
a unclear message:
rtw89_8922ae 0000:03:00.0: parse fw header fail
To address this case simpler, add a message to point out this.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217064308.43559-5-pkshih@realtek.com
|
|
The error code should be propagated to callers during downloading firmware
header and body. Remove unnecessary assignment of -1.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217064308.43559-4-pkshih@realtek.com
|
|
The sb_sel_ver is selection version for secure boot recorded in firmware
binary data, and its size is 4 and offset is 58 (not natural alignment).
Use get_unaligned_le32() to get this value safely. Find this by reviewing.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217064308.43559-3-pkshih@realtek.com
|
|
To ensure secure chip only runs expected secure firmware, stop using
obsolete firmware in blacklist which weakness or flaw was found.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217064308.43559-2-pkshih@realtek.com
|
|
BT-coexistence configure WiFi TX time to share time slots with Bluetooth
devices. Since the format is different from WiFi 6 chips, add the new
format accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217063053.38936-3-pkshih@realtek.com
|
|
common flow
The agg_limit and txcnt_limit are used by BT-coexistence to reduce
WiFi TX time at once to share time with Bluetooth devices. Since
these registers address are different from WiFi 6 and 7 chips, define
them accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217063053.38936-2-pkshih@realtek.com
|
|
A previous patch introduces a build-time warning when CONFIG_DCB
is disabled:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c: In function 'otx2_probe':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:3217:1: error: label 'err_free_zc_bmap' defined but not used [-Werror=unused-label]
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c: In function 'otx2vf_probe':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c:740:1: error: label 'err_free_zc_bmap' defined but not used [-Werror=unused-label]
Add the same #ifdef check around it.
Fixes: efabce290151 ("octeontx2-pf: AF_XDP zero copy receive support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://patch.msgid.link/20250219162239.1376865-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct the hardware revision check comment in the QT2025 driver. The
revision value was documented as 0x3b instead of the correct 0xb3,
which matches the actual comparison logic in the code.
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://patch.msgid.link/20250219-qt2025-comment-fix-v2-1-029f67696516@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EHT MU PPDU contains user field of EHT-SIG field with STA-ID that
must match AID subfield in the Associate Response. Add a necessary
setting to prevent these from being inconsistent.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217061235.32031-1-pkshih@realtek.com
|
|
The function ext_requested() serves two distinct purposes: it checks
if extended link modes were requested, and it selects whether to use
extended or legacy link modes.
This change separates these two purposes. Now, ext_link_mode_requested()
is used directly for checking if extended link modes are requested,
while the selection of extended modes is handled independently based on
the autonegotiation status.
By making this distinction, the logic for determining whether to select
extended or legacy link modes is clearer.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
eth_proto_cap parameter represents the supported link modes,
while eth_proto_admin refers to the configured ones.
The function get_advertising() retrieves the configured link
modes, thus we update its parameter name to eth_proto_admin.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The functions ptys2ethtool_supported_link(), ptys2ethtool_adver_link()
share the same code, thus, in order to remove code duplication we
introduce a new function ptys2ethtool_process_link() to handle the
processing of both supported and advertised link modes.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function ptys2ethtool_adver_link() contains duplicated code that
is found in mlx5e_ethtool_get_speed_arr().
To eliminate this redundancy, we update mlx5e_ethtool_get_speed_arr()
to select the appropriate table based on the ext argument passed by
the caller, rather than querying the supported mode locally.
This allows us to replace the current logic in ptys2ethtool_adver_link()
with a call to mlx5e_ethtool_get_speed_arr().
This adjustment aligns with the ptys2ethtool_supported_link() function
and prepares for an upcoming patch that reduces code duplication.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The implication of the previous help text was that without this option
enabled, representor devices couldn't be added to a bridge device, while
in fact that was possible, just that rules didn't get offloaded to hw.
This commit clarifies the help text.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the vendor driver is claimed to measure 'tssi_alimk_time' of
'struct rtw89_tssi_info' in microseconds, adjust rtw8852b{t}-specific
'_tssi_alimentk()' to not mess the former with nanoseconds and print
both per-call and accumulated times. Compile tested only.
Fixes: 7f18a70d7b4d ("wifi: rtw89: 8852b: rfk: add TSSI")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250213095006.1308810-1-dmantipov@yandex.ru
|
|
Add two more USB IDs found in
https://github.com/RinCat/RTL88x2BU-Linux-Driver
to support Mercusys MA30N and D-Link DWA-T185 rev. A1.
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250210073610.4174-1-zenmchen@gmail.com
|
|
Loongson's DWMAC device may take nearly two seconds to complete DMA reset,
however, the default waiting time for reset is 200 milliseconds.
Therefore, the following error message may appear:
[14.427169] dwmac-loongson-pci 0000:00:03.2: Failed to reset the dma
Fixes: 803fc61df261 ("net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support")
Cc: stable@vger.kernel.org
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20250219020701.15139-1-zhaoqunqin@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable Launch Time Control (LTC) support for XDP zero copy via XDP Tx
metadata framework.
This patch has been tested with tools/testing/selftests/bpf/xdp_hw_metadata
on Intel I225-LM Ethernet controller. Below are the test steps and result.
Test 1: Send a single packet with the launch time set to 1 s in the future.
Test steps:
1. On the DUT, start the xdp_hw_metadata selftest application:
$ sudo ./xdp_hw_metadata enp2s0 -l 1000000000 -L 1
2. On the Link Partner, send a UDP packet with VLAN priority 1 to port 9091
of the DUT.
Result:
When the launch time is set to 1 s in the future, the delta between the
launch time and the transmit hardware timestamp is 0.016 us, as shown in
printout of the xdp_hw_metadata application below.
0x562ff5dc8880: rx_desc[4]->addr=84110 addr=84110 comp_addr=84110 EoP
rx_hash: 0xE343384 with RSS type:0x1
HW RX-time: 1734578015467548904 (sec:1734578015.4675)
delta to User RX-time sec:0.0002 (183.103 usec)
XDP RX-time: 1734578015467651698 (sec:1734578015.4677)
delta to User RX-time sec:0.0001 (80.309 usec)
No rx_vlan_tci or rx_vlan_proto, err=-95
0x562ff5dc8880: ping-pong with csum=561c (want c7dd)
csum_start=34 csum_offset=6
HW RX-time: 1734578015467548904 (sec:1734578015.4675)
delta to HW Launch-time sec:1.0000 (1000000.000 usec)
0x562ff5dc8880: complete tx idx=4 addr=4018
HW Launch-time: 1734578016467548904 (sec:1734578016.4675)
delta to HW TX-complete-time sec:0.0000 (0.016 usec)
HW TX-complete-time: 1734578016467548920 (sec:1734578016.4675)
delta to User TX-complete-time sec:0.0000
(32.546 usec)
XDP RX-time: 1734578015467651698 (sec:1734578015.4677)
delta to User TX-complete-time sec:0.9999
(999929.768 usec)
HW RX-time: 1734578015467548904 (sec:1734578015.4675)
delta to HW TX-complete-time sec:1.0000 (1000000.016 usec)
0x562ff5dc8880: complete rx idx=132 addr=84110
Test 2: Send 1000 packets with a 10 ms interval and the launch time set to
500 us in the future.
Test steps:
1. On the DUT, start the xdp_hw_metadata selftest application:
$ sudo chrt -f 99 ./xdp_hw_metadata enp2s0 -l 500000 -L 1 > \
/dev/shm/result.log
2. On the Link Partner, send 1000 UDP packets with a 10 ms interval and
VLAN priority 1 to port 9091 of the DUT.
Result:
When the launch time is set to 500 us in the future, the average delta
between the launch time and the transmit hardware timestamp is 0.016 us,
as shown in the analysis of /dev/shm/result.log below. The XDP launch time
works correctly in sending 1000 packets continuously.
Min delta: 0.005 us
Avr delta: 0.016 us
Max delta: 0.031 us
Total packets forwarded: 1000
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250216093430.957880-6-yoong.siang.song@intel.com
|
|
Refactor the code for inserting an empty frame into a new function
igc_insert_empty_frame(). This change extracts the logic for inserting
an empty packet from igc_xmit_frame_ring() into a separate function,
allowing it to be reused in future implementations, such as the XDP
zero copy transmit function.
Remove the igc_desc_unused() checking in igc_init_tx_empty_descriptor()
because the number of descriptors needed is guaranteed.
Ensure that skb allocation and DMA mapping work for the empty frame,
before proceeding to fill in igc_tx_buffer info, context descriptor,
and data descriptor.
Rate limit the error messages for skb allocation and DMA mapping failures.
Update the comment to indicate that the 2 descriptors needed by the empty
frame are already taken into consideration in igc_xmit_frame_ring().
Handle the case where the insertion of an empty frame fails and explain
the reason behind this handling.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250216093430.957880-5-yoong.siang.song@intel.com
|
|
Enable launch time (Time-Based Scheduling) support for XDP zero copy via
the XDP Tx metadata framework.
This patch has been tested with tools/testing/selftests/bpf/xdp_hw_metadata
on Intel Tiger Lake platform. Below are the test steps and result.
Test 1: Send a single packet with the launch time set to 1 s in the future.
Test steps:
1. On the DUT, start the xdp_hw_metadata selftest application:
$ sudo ./xdp_hw_metadata enp0s30f4 -l 1000000000 -L 1
2. On the Link Partner, send a UDP packet with VLAN priority 1 to port 9091
of the DUT.
Result:
When the launch time is set to 1 s in the future, the delta between the
launch time and the transmit hardware timestamp is 16.963 us, as shown in
printout of the xdp_hw_metadata application below.
0x55b5864717a8: rx_desc[4]->addr=88100 addr=88100 comp_addr=88100 EoP
No rx_hash, err=-95
HW RX-time: 1734579065767717328 (sec:1734579065.7677)
delta to User RX-time sec:0.0004 (375.624 usec)
XDP RX-time: 1734579065768004454 (sec:1734579065.7680)
delta to User RX-time sec:0.0001 (88.498 usec)
No rx_vlan_tci or rx_vlan_proto, err=-95
0x55b5864717a8: ping-pong with csum=5619 (want 0000)
csum_start=34 csum_offset=6
HW RX-time: 1734579065767717328 (sec:1734579065.7677)
delta to HW Launch-time sec:1.0000 (1000000.000 usec)
0x55b5864717a8: complete tx idx=4 addr=4018
HW Launch-time: 1734579066767717328 (sec:1734579066.7677)
delta to HW TX-complete-time sec:0.0000 (16.963 usec)
HW TX-complete-time: 1734579066767734291 (sec:1734579066.7677)
delta to User TX-complete-time sec:0.0001
(130.408 usec)
XDP RX-time: 1734579065768004454 (sec:1734579065.7680)
delta to User TX-complete-time sec:0.9999
(999860.245 usec)
HW RX-time: 1734579065767717328 (sec:1734579065.7677)
delta to HW TX-complete-time sec:1.0000 (1000016.963 usec)
0x55b5864717a8: complete rx idx=132 addr=88100
Test 2: Send 1000 packets with a 10 ms interval and the launch time set to
500 us in the future.
Test steps:
1. On the DUT, start the xdp_hw_metadata selftest application:
$ sudo chrt -f 99 ./xdp_hw_metadata enp0s30f4 -l 500000 -L 1 > \
/dev/shm/result.log
2. On the Link Partner, send 1000 UDP packets with a 10 ms interval and
VLAN priority 1 to port 9091 of the DUT.
Result:
When the launch time is set to 500 us in the future, the average delta
between the launch time and the transmit hardware timestamp is 13.854 us,
as shown in the analysis of /dev/shm/result.log below. The XDP launch time
works correctly in sending 1000 packets continuously.
Min delta: 08.410 us
Avr delta: 13.854 us
Max delta: 17.076 us
Total packets forwarded: 1000
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250216093430.957880-4-yoong.siang.song@intel.com
|
|
Add ethtool support to configure the IRQ coalescing behavior. Support
separate timers for Rx and Tx for time based coalescing. For frame based
configuration, currently we only support the Rx side.
The hardware allows configuration of descriptor count instead of frame
count requiring conversion between the two. We assume 2 descriptors
per frame, one for the metadata and one for the data segment.
When rx-frames are not configured, we set the RX descriptor count to
half the ring size as a fail safe.
Default configuration:
ethtool -c eth0 | grep -E "rx-usecs:|tx-usecs:|rx-frames:"
rx-usecs: 30
rx-frames: 0
tx-usecs: 35
IRQ rate test:
With single iperf flow we monitor IRQ rate while changing the tx-usesc and
rx-usecs to high and low values.
ethtool -C eth0 rx-frames 8192 rx-usecs 150 tx-usecs 150
irq/sec 13k
irq/sec 14k
irq/sec 14k
ethtool -C eth0 rx-frames 8192 rx-usecs 10 tx-usecs 10
irq/sec 27k
irq/sec 28k
irq/sec 28k
Validating the use of extack:
ethtool -C eth0 rx-frames 16384
netlink error: fbnic: rx_frames is above device max
netlink error: Invalid argument
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250218023520.2038010-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement support for generating a 1pps output signal on SDP0.
And support custom firmware to output TOD.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250218023432.146536-5-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement watchdog task to detect SYSTIME overflow and error cases of
Rx/Tx timestamp.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250218023432.146536-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the function get_ts_info and get_ts_stats in ethtool_ops to
get the HW capabilities and statistics for timestamping.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250218023432.146536-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement support for PTP clock on Wangxun NICs.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250218023432.146536-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tun simply advances iov_iter when it needs to pad virtio header,
which leaves the garbage in the buffer as is. This will become
especially problematic when tun starts to allow enabling the hash
reporting feature; even if the feature is enabled, the packet may lack a
hash value and may contain a hole in the virtio header because the
packet arrived before the feature gets enabled or does not contain the
header fields to be hashed. If the hole is not filled with zero, it is
impossible to tell if the packet lacks a hash value.
In theory, a user of tun can fill the buffer with zero before calling
read() to avoid such a problem, but leaving the garbage in the buffer is
awkward anyway so replace advancing the iterator with writing zeros.
A user might have initialized the buffer to some non-zero value,
expecting tun to skip writing it. As this was never a documented
feature, this seems unlikely.
The overhead of filling the hole in the header is negligible when the
header size is specified according to the specification as doing so will
not make another cache line dirty under a reasonable assumption. Below
is a proof of this statement:
The first 10 bytes of the header is always written and tun also writes
the packet itself immediately after the packet unless the packet is
empty. This makes a hole between these writes whose size is: sz - 10
where sz is the specified header size.
Therefore, we will never make another cache line dirty when:
sz < L1_CACHE_BYTES + 10
where L1_CACHE_BYTES is the cache line size. Assuming
L1_CACHE_BYTES >= 16, this inequation holds when: sz < 26.
sz <= 20 according to the current specification so we even have a
margin of 5 bytes in case that the header size grows in a future version
of the specification.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Link: https://patch.msgid.link/20250215-buffers-v2-1-1fbc6aaf8ad6@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When AP-VLAN support was added, the HTT_TCL_META_DATA_VALID_HTT flag
was not added to the tx_info's meta_data_flags. Without this flag the
firmware seems to reject all the broadcast (ap-vlan) frames. So add
the flag, just as ath11k did it in the downstream QSDK project[1].
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 26dd8ccdba4d ("wifi: ath12k: dynamic VLAN support")
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://git.codelinaro.org/clo/qsdk/oss/system/feeds/wlan-open/-/blob/win.wlan_host_opensource.3.0.r24/patches/ath11k/207-ath11k-Add-support-for-dynamic-vlan.patch # [1]
Link: https://patch.msgid.link/20250124113331.93476-1-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The current code in dp_rx.h declares the ath12k_dp_rx_h_find_peer() twice.
Fix this by removing one of the redundant declarations of
ath12k_dp_rx_h_find_peer() to ensure that the function is declared only
once.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20250219053640.223734-1-praneesh.p@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
While setting the DAC value, the wrong boolean value is evaluated to set
the DSP bias current. So let's correct the conditional statement and use
the right boolean value read from the DTS set in the priv.
Cc: stable@vger.kernel.org
Fixes: d1cb613efbd3 ("net: phy: qcom: add support for QCA807x PHY Family")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250219130923.7216-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The netdevsim driver was experiencing NOHZ tick-stop errors during packet
transmission due to pending softirq work when calling napi_schedule().
This issue was observed when running the netconsole selftest, which
triggered the following error message:
NOHZ tick-stop error: local softirq work is pending, handler #08!!!
To fix this issue, introduce a timer that schedules napi_schedule()
from a timer context instead of calling it directly from the TX path.
Create an hrtimer for each queue and kick it from the TX path,
which then schedules napi_schedule() from the timer context.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250219-netdevsim-v3-1-811e2b8abc4c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc4).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-02-19
this is a pull request of 12 patches for net-next/master.
The first 4 patches are by Krzysztof Kozlowski and simplify the c_can
driver's c_can_plat_probe() function.
Ciprian Marian Costea contributes 3 patches to add S32G2/S32G3 support
to the flexcan driver.
Ruffalo Lavoisier's patch removes a duplicated word from the mcp251xfd
DT bindings documentation.
Oleksij Rempel extends the J1939 documentation.
The next patch is by Oliver Hartkopp and adds access for the Remote
Request Substitution bit in CAN-XL frames.
Henrik Brix Andersen's patch for the gs_usb driver adds support for
the CANnectivity firmware.
The last patch is by Robin van der Gracht and removes a duplicated
setup of RX FIFO in the rockchip_canfd driver.
linux-can-next-for-6.15-20250219
* tag 'linux-can-next-for-6.15-20250219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_chip_fifo_setup(): remove duplicated setup of RX FIFO
can: gs_usb: add VID/PID for the CANnectivity firmware
can: canxl: support Remote Request Substitution bit access
can: j1939: Extend stack documentation with buffer size behavior
dt-binding: can: mcp251xfd: remove duplicate word
can: flexcan: add NXP S32G2/S32G3 SoC support
can: flexcan: Add quirk to handle separate interrupt lines for mailboxes
dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
can: c_can: Use syscon_regmap_lookup_by_phandle_args
can: c_can: Use of_property_present() to test existence of DT property
can: c_can: Simplify handling syscon error path
can: c_can: Drop useless final probe failure message
====================
Link: https://patch.msgid.link/20250219113354.529611-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add check for the return value of nfp_app_ctrl_msg_alloc() in
nfp_bpf_cmsg_alloc() to prevent null pointer dereference.
Fixes: ff3d43f7568c ("nfp: bpf: implement helpers for FW map ops")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250218030409.2425798-1-haoxiang_li2024@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The external PHY will undergo a soft reset twice during the resume process
when it wake up from suspend. The first reset occurs when the axienet
driver calls phylink_of_phy_connect(), and the second occurs when
mdio_bus_phy_resume() invokes phy_init_hw(). The second soft reset of the
external PHY does not reinitialize the internal PHY, which causes issues
with the internal PHY, resulting in the PHY link being down. To prevent
this, setting the mac_managed_pm flag skips the mdio_bus_phy_resume()
function.
Fixes: a129b41fe0a8 ("Revert "net: phy: dp83867: perform soft reset and retain established link"")
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250217055843.19799-1-nick.hu@sifive.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
priv->plat->fix_mac_speed() is called from stmmac_mac_link_up(), which
is passed the speed as an "int". However, fix_mac_speed() implicitly
casts this to an unsigned int. Some platform glue code print this value
using %u, others with %d. Some implicitly cast it back to an int, and
others to u32.
Good practice is to use one type and only one type to represent a value
being passed around a driver.
Switch all of these over to consistently use "int" when dealing with a
speed passed from stmmac_mac_link_up(), even though the speed will
always be positive.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://patch.msgid.link/E1tkKmN-004ObM-Ge@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
priv->flow_ctrl is only accessed by stmmac_main.c, and the only place
that it is read is in stmmac_mac_flow_ctrl(). This function is only
called from stmmac_mac_link_up() which always sets priv->flow_ctrl
immediately before calling this function.
Therefore, initialising this at probe time is ineffectual because it
will always be overwritten before it's read. As such, the "flow_ctrl"
module parameter has been useless for some time. Rather than remove
the module parameter, which would risk module load failure, change the
description to indicate that it is obsolete, and warn if it is set by
userspace.
Moreover, storing the value in the stmmac_priv has no benefit as it's
set and then immediately read stmmac_mac_flow_ctrl(). Instead, pass it
as a parameter to this function..
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://patch.msgid.link/E1tkKmI-004ObG-DL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
priv->pause corresponds with "pause_time" in the 802.3 specification,
and is also called "pause_time" in the various MAC backends. For
consistency, use the same name in the core stmmac code.
Clarify the units of the "pause" module parameter which sets up this
struct member to indicate that it's in units of the pause_quanta
defined by 802.3, which is 512 bit times.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/E1tkKmD-004ObA-9K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add more logs to assist in debugging and monitoring
driver behaviour, making it easier to identify potential
issues during development and testing.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1739842455-23899-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in the previous patch, iterating for_each_netdev() and
gn->geneve_list during ->exit_batch_rtnl() could trigger ->dellink()
twice for the same device.
If CONFIG_DEBUG_LIST is enabled, we will see a list_del() corruption
splat in the 2nd call of geneve_dellink().
Let's remove for_each_netdev() in geneve_destroy_tunnels() and delegate
that part to default_device_exit_batch().
Fixes: 9593172d93b9 ("geneve: Fix use-after-free in geneve_find_dev().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250217203705.40342-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Brad Spengler reported the list_del() corruption splat in
gtp_net_exit_batch_rtnl(). [0]
Commit eb28fd76c0a0 ("gtp: Destroy device along with udp socket's netns
dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl()
to destroy devices in each netns as done in geneve and ip tunnels.
However, this could trigger ->dellink() twice for the same device during
->exit_batch_rtnl().
Say we have two netns A & B and gtp device B that resides in netns B but
whose UDP socket is in netns A.
1. cleanup_net() processes netns A and then B.
2. gtp_net_exit_batch_rtnl() finds the device B while iterating
netns A's gn->gtp_dev_list and calls ->dellink().
[ device B is not yet unlinked from netns B
as unregister_netdevice_many() has not been called. ]
3. gtp_net_exit_batch_rtnl() finds the device B while iterating
netns B's for_each_netdev() and calls ->dellink().
gtp_dellink() cleans up the device's hash table, unlinks the dev from
gn->gtp_dev_list, and calls unregister_netdevice_queue().
Basically, calling gtp_dellink() multiple times is fine unless
CONFIG_DEBUG_LIST is enabled.
Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and
delegate the destruction to default_device_exit_batch() as done
in bareudp.
[0]:
list_del corruption, ffff8880aaa62c00->next (autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]) is LIST_POISON1 (ffffffffffffff02) (prev is 0xffffffffffffff04)
kernel BUG at lib/list_debug.c:58!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 UID: 0 PID: 1804 Comm: kworker/u8:7 Tainted: G T 6.12.13-grsec-full-20250211091339 #1
Tainted: [T]=RANDSTRUCT
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: netns cleanup_net
RIP: 0010:[<ffffffff84947381>] __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58
Code: c2 76 91 31 c0 e8 9f b1 f7 fc 0f 0b 4d 89 f0 48 c7 c1 02 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 e0 c2 76 91 31 c0 e8 7f b1 f7 fc <0f> 0b 4d 89 e8 48 c7 c1 04 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 60
RSP: 0018:fffffe8040b4fbd0 EFLAGS: 00010283
RAX: 00000000000000cc RBX: dffffc0000000000 RCX: ffffffff818c4054
RDX: ffffffff84947381 RSI: ffffffff818d1512 RDI: 0000000000000000
RBP: ffff8880aaa62c00 R08: 0000000000000001 R09: fffffbd008169f32
R10: fffffe8040b4f997 R11: 0000000000000001 R12: a1988d84f24943e4
R13: ffffffffffffff02 R14: ffffffffffffff04 R15: ffff8880aaa62c08
RBX: kasan shadow of 0x0
RCX: __wake_up_klogd.part.0+0x74/0xe0 kernel/printk/printk.c:4554
RDX: __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58
RSI: vprintk+0x72/0x100 kernel/printk/printk_safe.c:71
RBP: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]
RSP: process kstack fffffe8040b4fbd0+0x7bd0/0x8000 [kworker/u8:7+netns 1804 ]
R09: kasan shadow of process kstack fffffe8040b4f990+0x7990/0x8000 [kworker/u8:7+netns 1804 ]
R10: process kstack fffffe8040b4f997+0x7997/0x8000 [kworker/u8:7+netns 1804 ]
R15: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc08/0x1000 [slab object]
FS: 0000000000000000(0000) GS:ffff888116000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000748f5372c000 CR3: 0000000015408000 CR4: 00000000003406f0 shadow CR4: 00000000003406f0
Stack:
0000000000000000 ffffffff8a0c35e7 ffffffff8a0c3603 ffff8880aaa62c00
ffff8880aaa62c00 0000000000000004 ffff88811145311c 0000000000000005
0000000000000001 ffff8880aaa62000 fffffe8040b4fd40 ffffffff8a0c360d
Call Trace:
<TASK>
[<ffffffff8a0c360d>] __list_del_entry_valid include/linux/list.h:131 [inline] fffffe8040b4fc28
[<ffffffff8a0c360d>] __list_del_entry include/linux/list.h:248 [inline] fffffe8040b4fc28
[<ffffffff8a0c360d>] list_del include/linux/list.h:262 [inline] fffffe8040b4fc28
[<ffffffff8a0c360d>] gtp_dellink+0x16d/0x360 drivers/net/gtp.c:1557 fffffe8040b4fc28
[<ffffffff8a0d0404>] gtp_net_exit_batch_rtnl+0x124/0x2c0 drivers/net/gtp.c:2495 fffffe8040b4fc88
[<ffffffff8e705b24>] cleanup_net+0x5a4/0xbe0 net/core/net_namespace.c:635 fffffe8040b4fcd0
[<ffffffff81754c97>] process_one_work+0xbd7/0x2160 kernel/workqueue.c:3326 fffffe8040b4fd88
[<ffffffff81757195>] process_scheduled_works kernel/workqueue.c:3407 [inline] fffffe8040b4fec0
[<ffffffff81757195>] worker_thread+0x6b5/0xfa0 kernel/workqueue.c:3488 fffffe8040b4fec0
[<ffffffff817782a0>] kthread+0x360/0x4c0 kernel/kthread.c:397 fffffe8040b4ff78
[<ffffffff814d8594>] ret_from_fork+0x74/0xe0 arch/x86/kernel/process.c:172 fffffe8040b4ffb8
[<ffffffff8110f509>] ret_from_fork_asm+0x29/0xc0 arch/x86/entry/entry_64.S:399 fffffe8040b4ffe8
</TASK>
Modules linked in:
Fixes: eb28fd76c0a0 ("gtp: Destroy device along with udp socket's netns dismantle.")
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250217203705.40342-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM53101 is a ethernet switch, very similar to the BCM53115.
Enable support for it, in the existing b53 dsa driver.
Signed-off-by: Torben Nielsen <torben.nielsen@prevas.dk>
Signed-off-by: Claus Stovgaard <claus.stovgaard@prevas.dk>
Link: https://patch.msgid.link/20250217080503.1390282-1-claus.stovgaard@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drop separate TX completion functions for SKB and XDP. To do that
use the SW_DATA mechanism to store ndev and skb/xdpf for TX packets.
Use BUILD_BUG_ON_MSG() to fail build if SW_DATA size exceeds whats
available. i.e. AM65_CPSW_NAV_SW_DATA_SIZE.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
am65_cpsw_run_xdp()
This allows us to re-use am65_cpsw_run_xdp() for zero copy
case. Add AM65_CPSW_XDP_TX case for successful XDP_TX so we don't
free the page while in flight.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
