summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2025-02-12net/mlx5e: Add direct TIRs to devlink rx reporter diagnoseAmir Tzin
Add "RX resources" tag to the output of rx reporter diagnose callback. Underneath add tag for direct TIRs, for each TIR expose its tirn and the corresponding rqtn. $ sudo devlink health diagnose auxiliary/mlx5_core.eth.0/65535 reporter rx .... rx resources: Direct TIRs: ix: 0 tirn: 20 rqtn: 1 ix: 1 tirn: 21 rqtn: 2 ix: 2 tirn: 22 rqtn: 3 ix: 3 tirn: 23 rqtn: 4 ix: 4 tirn: 24 rqtn: 5 ix: 5 tirn: 25 rqtn: 6 ix: 6 tirn: 26 rqtn: 7 ix: 7 tirn: 27 rqtn: 8 ix: 8 tirn: 28 rqtn: 9 ix: 9 tirn: 29 rqtn: 10 ix: 10 tirn: 30 rqtn: 11 ix: 11 tirn: 31 rqtn: 12 ix: 12 tirn: 32 rqtn: 13 ix: 13 tirn: 33 rqtn: 14 ix: 14 tirn: 34 rqtn: 15 ix: 15 tirn: 35 rqtn: 16 ix: 16 tirn: 36 rqtn: 17 ix: 17 tirn: 37 rqtn: 18 ix: 18 tirn: 38 rqtn: 19 ix: 19 tirn: 39 rqtn: 20 ix: 20 tirn: 40 rqtn: 21 ix: 21 tirn: 41 rqtn: 22 ix: 22 tirn: 42 rqtn: 23 ix: 23 tirn: 43 rqtn: 24 Signed-off-by: Amir Tzin <amirtz@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250209101716.112774-13-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net/mlx5e: Move RQs diagnose to a dedicated functionAmir Tzin
Move rx reporter RQs diagnose from mlx5e_rx_reporter_diagnose() to a dedicated function. This change is a preparation for the following series which extends diagnose output for the rx reporter. While at it, also pass a mlx5e_priv pointer to mlx5e_rx_reporter_diagnose_common_config() as this is the argument the latter actually needs. Signed-off-by: Amir Tzin <amirtz@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250209101716.112774-12-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net/mlx5: Expose ICM consumption per functionAkiva Goldberger
ICM is a portion of the host's memory assigned to a function by the OS through requests made by the NIC's firmware. PF ICM consumption can be accessed directly, while VF/SF ICM consumption can be accessed through their representors in switchdev mode. The value is exposed to the user in granularity of 4KB through the vnic health reporter as follows: $ devlink health diagnose pci/0000:08:00.0 reporter vnic vNIC env counters: total_error_queues: 0 send_queue_priority_update_flow: 0 comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0 invalid_command: 0 quota_exceeded_command: 0 nic_receive_steering_discard: 0 icm_consumption: 1032 Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250209101716.112774-11-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net/mlx5: Rename and move mlx5_esw_query_vport_vhca_idAkiva Goldberger
Rename mlx5_esw_query_vport_vhca_id to mlx5_vport_get_vhca_id and move it to vport file. Also, add function declaration to mlx5_core header file. This better represents the function's usage and allows for it to be called from other parts of the mlx5_core driver. Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250209101716.112774-10-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net/mlx5e: set the tx_queue_len for pfifo_fastWilliam Tu
By default, the mq netdev creates a pfifo_fast qdisc. On a system with 16 core, the pfifo_fast with 3 bands consumes 16 * 3 * 8 (size of pointer) * 1024 (default tx queue len) = 393KB. The patch sets the tx qlen to representor default value, 128 (1<<MLX5E_REP_PARAMS_DEF_LOG_SQ_SIZE), which consumes 16 * 3 * 8 * 128 = 49KB, saving 344KB for each representor at ECPF. Signed-off-by: William Tu <witu@nvidia.com> Reviewed-by: Daniel Jurgens <danielj@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250209101716.112774-9-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net/mlx5e: reduce rep rxq depth to 256 for ECPFWilliam Tu
By experiments, a single queue representor netdev consumes kernel memory around 2.8MB, and 1.8MB out of the 2.8MB is due to page pool for the RXQ. Scaling to a thousand representors consumes 2.8GB, which becomes a memory pressure issue for embedded devices such as BlueField-2 16GB / BlueField-3 32GB memory. Since representor netdevs mostly handles miss traffic, and ideally, most of the traffic will be offloaded, reduce the default non-uplink rep netdev's RXQ default depth from 1024 to 256 if mdev is ecpf eswitch manager. This saves around 1MB of memory per regular RQ, (1024 - 256) * 2KB, allocated from page pool. With rxq depth of 256, the netlink page pool tool reports $./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump page-pool-get {'id': 277, 'ifindex': 9, 'inflight': 128, 'inflight-mem': 786432, 'napi-id': 775}] This is due to mtu 1500 + headroom consumes half pages, so 256 rxq entries consumes around 128 pages (thus create a page pool with size 128), shown above at inflight. Note that each netdev has multiple types of RQs, including Regular RQ, XSK, PTP, Drop, Trap RQ. Since non-uplink representor only supports regular rq, this patch only changes the regular RQ's default depth. Signed-off-by: William Tu <witu@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250209101716.112774-8-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net/mlx5e: reduce the max log mpwrq sz for ECPF and repsWilliam Tu
For the ECPF and representors, reduce the max MPWRQ size from 256KB (18) to 128KB (17). This prepares the later patch for saving representor memory. With Striding RQ, there is a minimum of 4 MPWQEs. So with 128KB of max MPWRQ size, the minimal memory is 4 * 128KB = 512KB. When creating page pool, consider 1500 mtu, the minimal page pool size will be 512KB/4KB = 128 pages = 256 rx ring entries (2 entries per page). Before this patch, setting RX ringsize (ethtool -G rx) to 256 causes driver to allocate page pool size more than it needs due to max MPWRQ is 256KB (18). Ex: 4 * 256KB = 1MB, 1MB/4KB = 256 pages, but actually 128 pages is good enough. Reducing the max MPWRQ to 128KB fixes the limitation. Signed-off-by: William Tu <witu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250209101716.112774-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-02-10 (ice, igc, e1000e) For ice: Karol, Jake, and Michal add PTP support for E830 devices. Karol refactors and cleans up PTP code. Jake allows for a common cross-timestamp implementation to be shared for all devices and Michal adds E830 support. Mateusz cleans up initial Flow Director rule creation to loop rather than duplicate repeated similar calls. For igc: Siang adjust calls to remove need for close and open calls on loading XDP program. For e1000e: Gerhard Engleder batches register writes for writing multicast table on real-time kernels. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000e: Fix real-time violations on link up igc: Avoid unnecessary link down event in XDP_SETUP_PROG process ice: refactor ice_fdir_create_dflt_rules() function ice: Implement PTP support for E830 devices ice: Refactor ice_ptp_init_tx_* ice: Add unified ice_capture_crosststamp ice: Process TSYN IRQ in a separate function ice: Use FIELD_PREP for timestamp values ice: Remove unnecessary ice_is_e8xx() functions ice: Don't check device type when checking GNSS presence ==================== Link: https://patch.msgid.link/20250210192352.3799673-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11iavf: Fix a locking bug in an error pathBart Van Assche
If the netdev lock has been obtained, unlock it before returning. This bug has been detected by the Clang thread-safety analyzer. Fixes: afc664987ab3 ("eth: iavf: extend the netdev_lock usage") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://patch.msgid.link/20250206175114.1974171-28-bvanassche@acm.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11sfc: document devlink flash supportEdward Cree
Update the information in sfc's devlink documentation including support for firmware update with devlink flash. Also update the help text for CONFIG_SFC_MTD, as it is no longer strictly required for firmware updates. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/3476b0ef04a0944f03e0b771ec8ed1a9c70db4dc.1739186253.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11sfc: deploy devlink flash images to NIC over MCDIEdward Cree
Use MC_CMD_NVRAM_* wrappers to write the firmware to the partition identified from the image header. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/a746335876b621b3e54cf4e49948148e349a1745.1739186253.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11sfc: extend NVRAM MCDI handlersEdward Cree
Support variable write-alignment, and background updates. The latter allows other MCDI to continue while the device is processing an MC_CMD_NVRAM_UPDATE_FINISH, since this can take a long time owing to e.g. cryptographic signature verification. Expose these handlers in mcdi.h, and build them even when CONFIG_SFC_MTD=n, so they can be used for devlink flash in a subsequent patch. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/de3d9e14fee69e15d95b46258401a93b75659f78.1739186253.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11sfc: parse headers of devlink flash imagesEdward Cree
This parsing is necessary to obtain the metadata which will be used in a subsequent patch to write the image to the device. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/65318300f3f1b1462925f917f7c0d0ac833955ae.1739186253.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11net: phy: aquantia: Use HWMON_CHANNEL_INFO macro to simplify codeHuisong Li
Use HWMON_CHANNEL_INFO macro to simplify code. Signed-off-by: Huisong Li <lihuisong@huawei.com> Link: https://patch.msgid.link/20250210054710.12855-6-lihuisong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11net: phy: marvell10g: Use HWMON_CHANNEL_INFO macro to simplify codeHuisong Li
Use HWMON_CHANNEL_INFO macro to simplify code. Signed-off-by: Huisong Li <lihuisong@huawei.com> Link: https://patch.msgid.link/20250210054710.12855-5-lihuisong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11net: phy: marvell: Use HWMON_CHANNEL_INFO macro to simplify codeHuisong Li
Use HWMON_CHANNEL_INFO macro to simplify code. Signed-off-by: Huisong Li <lihuisong@huawei.com> Link: https://patch.msgid.link/20250210054710.12855-4-lihuisong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11net: nfp: Use HWMON_CHANNEL_INFO macro to simplify codeHuisong Li
Use HWMON_CHANNEL_INFO macro to simplify code. Signed-off-by: Huisong Li <lihuisong@huawei.com> Link: https://patch.msgid.link/20250210054710.12855-3-lihuisong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11net: aquantia: Use HWMON_CHANNEL_INFO macro to simplify codeHuisong Li
Use HWMON_CHANNEL_INFO macro to simplify code. Signed-off-by: Huisong Li <lihuisong@huawei.com> Link: https://patch.msgid.link/20250210054710.12855-2-lihuisong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11net: wwan: t7xx: don't include '<linux/pm_wakeup.h>' directlyWolfram Sang
The header clearly states that it does not want to be included directly, only via '<linux/(platform_)?device.h>'. Which is already present, so delete the superfluous include. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://patch.msgid.link/20250210113710.52071-2-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11net: phy: broadcom: don't include '<linux/pm_wakeup.h>' directlyWolfram Sang
The header clearly states that it does not want to be included directly, only via '<linux/(platform_)?device.h>'. Replace the include accordingly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250210113658.52019-2-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11net: freescale: ucc_geth: remove unused PHY_INIT_TIMEOUT and PHY_CHANGE_TIMEHeiner Kallweit
Both definitions are unused. Last users have been removed with: 1577ecef7666 ("netdev: Merge UCC and gianfar MDIO bus drivers") 728de4c927a3 ("ucc_geth: migrate ucc_geth to phylib") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://patch.msgid.link/62e9429b-57e0-42ec-96a5-6a89553f441d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11hamradio: baycom: replace strcpy() with strscpy()Ethan Carter Edwards
The strcpy() function has been deprecated and replaced with strscpy(). There is an effort to make this change treewide: https://github.com/KSPP/linux/issues/88. Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/3qo3fbrak7undfgocsi2s74v4uyjbylpdqhie4dohfoh4welfn@joq7up65ug6v Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11net: phylink: make configuring clock-stop dependent on MAC supportRussell King (Oracle)
We should not be configuring the PHYs clock-stop settings unless the MAC supports phylink managed EEE. Make this dependent on MAC support. This was noticed in a suspicious RCU usage report from the kernel test robot (the suspicious RCU usage due to calling phy_detach() remains unaddressed, but is triggered by the error this was generating.) Fixes: 03abf2a7c654 ("net: phylink: add EEE management") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tgjNn-003q0w-Pw@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11vxlan: check vxlan_vnigroup_init() return valueEric Dumazet
vxlan_init() must check vxlan_vnigroup_init() success otherwise a crash happens later, spotted by syzbot. Oops: general protection fault, probably for non-canonical address 0xdffffc000000002c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000160-0x0000000000000167] CPU: 0 UID: 0 PID: 7313 Comm: syz-executor147 Not tainted 6.14.0-rc1-syzkaller-00276-g69b54314c975 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:vxlan_vnigroup_uninit+0x89/0x500 drivers/net/vxlan/vxlan_vnifilter.c:912 Code: 00 48 8b 44 24 08 4c 8b b0 98 41 00 00 49 8d 86 60 01 00 00 48 89 c2 48 89 44 24 10 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4d 04 00 00 49 8b 86 60 01 00 00 48 ba 00 00 00 RSP: 0018:ffffc9000cc1eea8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000001 RCX: ffffffff8672effb RDX: 000000000000002c RSI: ffffffff8672ecb9 RDI: ffff8880461b4f18 RBP: ffff8880461b4ef4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000020000 R13: ffff8880461b0d80 R14: 0000000000000000 R15: dffffc0000000000 FS: 00007fecfa95d6c0(0000) GS:ffff88806a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fecfa95cfb8 CR3: 000000004472c000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vxlan_uninit+0x1ab/0x200 drivers/net/vxlan/vxlan_core.c:2942 unregister_netdevice_many_notify+0x12d6/0x1f30 net/core/dev.c:11824 unregister_netdevice_many net/core/dev.c:11866 [inline] unregister_netdevice_queue+0x307/0x3f0 net/core/dev.c:11736 register_netdevice+0x1829/0x1eb0 net/core/dev.c:10901 __vxlan_dev_create+0x7c6/0xa30 drivers/net/vxlan/vxlan_core.c:3981 vxlan_newlink+0xd1/0x130 drivers/net/vxlan/vxlan_core.c:4407 rtnl_newlink_create net/core/rtnetlink.c:3795 [inline] __rtnl_newlink net/core/rtnetlink.c:3906 [inline] Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Reported-by: syzbot+6a9624592218c2c5e7aa@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67a9d9b4.050a0220.110943.002d.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250210105242.883482-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11net: phy: rename phy_set_eee_broken to phy_disable_eee_modeHeiner Kallweit
Consider that an EEE mode may not be broken but simply not supported by the MAC, and rename function phy_set_eee_broken(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/30deb630-3f6b-4ffb-a1e6-a9736021f43a@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11net: phy: rename eee_broken_modes to eee_disabled_modesHeiner Kallweit
This bitmap is used also if the MAC doesn't support an EEE mode. So the mode isn't necessarily broken in the PHY. Therefore rename the bitmap. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/6cd11422-dd67-4c87-a642-308de694af92@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11igc: Set buffer type for empty frames in igc_init_empty_frameSong Yoong Siang
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB for empty frame in the igc_init_empty_frame function. This ensures that the buffer type is correctly identified and handled during Tx ring cleanup. Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Cc: stable@vger.kernel.org # 6.2+ Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-11igc: Fix HW RX timestamp when passed by ZC XDPZdenek Bouska
Fixes HW RX timestamp in the following scenario: - AF_PACKET socket with enabled HW RX timestamps is created - AF_XDP socket with enabled zero copy is created - frame is forwarded to the BPF program, where the timestamp should still be readable (extracted by igc_xdp_rx_timestamp(), kfunc behind bpf_xdp_metadata_rx_timestamp()) - the frame got XDP_PASS from BPF program, redirecting to the stack - AF_PACKET socket receives the frame with HW RX timestamp Moves the skb timestamp setting from igc_dispatch_skb_zc() to igc_construct_skb_zc() so that igc_construct_skb_zc() is similar to igc_construct_skb(). This issue can also be reproduced by running: # tools/testing/selftests/bpf/xdp_hw_metadata enp1s0 When a frame with the wrong port 9092 (instead of 9091) is used: # echo -n xdp | nc -u -q1 192.168.10.9 9092 then the RX timestamp is missing and xdp_hw_metadata prints: skb hwtstamp is not found! With this fix or when copy mode is used: # tools/testing/selftests/bpf/xdp_hw_metadata -c enp1s0 then RX timestamp is found and xdp_hw_metadata prints: found skb hwtstamp = 1736509937.852786132 Fixes: 069b142f5819 ("igc: Add support for PTP .getcyclesx64()") Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com> Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-11ixgbe: Fix possible skb NULL pointer dereferencePiotr Kwapulinski
The commit c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()") stopped utilizing the ERR-like macros for xdp status encoding. Propagate this logic to the ixgbe_put_rx_buffer(). The commit also relaxed the skb NULL pointer check - caught by Smatch. Restore this check. Fixes: c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/intel-wired-lan/2c7d6c31-192a-4047-bd90-9566d0e14cc0@stanley.mountain/ Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-11idpf: call set_real_num_queues in idpf_openJoshua Hay
On initial driver load, alloc_etherdev_mqs is called with whatever max queue values are provided by the control plane. However, if the driver is loaded on a system where num_online_cpus() returns less than the max queues, the netdev will think there are more queues than are actually available. Only num_online_cpus() will be allocated, but skb_get_queue_mapping(skb) could possibly return an index beyond the range of allocated queues. Consequently, the packet is silently dropped and it appears as if TX is broken. Set the real number of queues during open so the netdev knows how many queues will be allocated. Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-11idpf: record rx queue in skb for RSC packetsSridhar Samudrala
Move the call to skb_record_rx_queue in idpf_rx_process_skb_fields() so that RX queue is recorded for RSC packets too. Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()") Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-11idpf: fix handling rsc packet with a single segmentSridhar Samudrala
Handle rsc packet with a single segment same as a multi segment rsc packet so that CHECKSUM_PARTIAL is set in the skb->ip_summed field. The current code is passing CHECKSUM_NONE resulting in TCP GRO layer doing checksum in SW and hiding the issue. This will fail when using dmabufs as payload buffers as skb frag would be unreadable. Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support") Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-11wifi: ath12k: Support Received FSE StatsDinesh Karthikeyan
Add support to request received Finite State Entropy stats from firmware through HTT stats type 28. These stats give software and hardware FSE stats such as cache entry count, full cache count, current and peak occupancy count, pending search counts, etc. Sample output: ------------- echo 28 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_RX_FSE_STATS_TLV: === Software RX FSE STATS === Enable count = 0 Disable count = 0 Cache invalidate entry count = 0 Full cache invalidate count = 0 === Hardware RX FSE STATS === Cache hits count = 0 Cache no. of searches = 0 Cache occupancy peak count: [0] = 0 [1-16] = 0 [17-32] = 0 [33-48] = 0 [49-64] = 0 [65-80] = 0 [81-96] = 0 [97-112] = 0 [113-127] = 0 [128] = 0 Cache occupancy current count: [0] = 0 [1-16] = 0 [17-32] = 0 [33-48] = 0 [49-64] = 0 [65-80] = 0 [81-96] = 0 [97-112] = 0 [113-127] = 0 [128] = 0 Cache search square count: [0] = 0 [1-50] = 0 [51-100] = 0 [101-200] = 0 [201-255] = 0 [256] = 0 Cache search peak pending count: [0] = 0 [1-2] = 0 [3-4] = 0 [Greater/Equal to 5] = 0 Cache search tot pending count: [0] = 0 [1-2] = 0 [3-4] = 0 [Greater/Equal to 5] = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-6-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Uplink MUMIMO Trigger StatsRoopni Devanathan
Add support to request uplink MUMIMO trigger stats from firmware through HTT stats type 27. These stats give information about bandwidth, RSSI of signal received, dB mean of pilots received, etc., of all users. Note: MCC firmware version WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support tags HTT_STATS_RX_PDEV_UL_TRIG_STATS_TAG(94) and HTT_STATS_RX_PDEV_UL_OFDMA_USER_STATS_TAG(95), currently. Sample output: ------------- echo 27 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_RX_PDEV_UL_MUMIMO_TRIG_STATS_TLV: mac_id = 0 rx_11ax_ul_mumimo = 0 ul_mumimo_rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_mumimo_rx_gi_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_mumimo_rx_gi_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ..... ul_mumimo_rx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 half_ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 quarter_ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 ul_mumimo_rx_stbc = 0 ul_mumimo_rx_ldpc = 0 rx_ul_mumimo_rssi_in_dbm: chain0 = 0:6, 1:0, 2:0, 3:0 rx_ul_mumimo_rssi_in_dbm: chain1 = 0:0, 1:0, 2:0, 3:0 ..... rx_ul_mumimo_target_rssi: user_0 = 0:-128, 1:-128, 2:-128, 3:-128 rx_ul_mumimo_target_rssi: user_1 = 0:-128, 1:-128, 2:-128, 3:-128 ..... rx_ul_mumimo_fd_rssi: user_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_mumimo_fd_rssi: user_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 ..... rx_ulmumimo_pilot_evm_db_mean: user_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulmumimo_pilot_evm_db_mean: user_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 ..... ul_mumimo_basic_trigger_rx_qos_null_only = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-5-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Uplink OFDMA Trigger StatsDinesh Karthikeyan
Add support to request uplink trigger stats from firmware through HTT stats type 26. These stats give information about uplink OFDMA bandwidth, received RSSI, power headroom, QoS, data size, PPDU info and pass/fail info for each user. Note: MCC firmware version WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support tags HTT_STATS_RX_PDEV_UL_TRIG_STATS_TAG(94) and HTT_STATS_RX_PDEV_UL_OFDMA_USER_STATS_TAG(95), currently. Sample output: ------------- echo 26 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_RX_PDEV_UL_TRIGGER_STATS_TLV: mac_id = 0 rx_11ax_ul_ofdma = 0 ul_ofdma_rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 half_ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 quarter_ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 ..... HTT_RX_PDEV_UL_OFDMA_USER_STAS_TLV: rx_ulofdma_non_data_ppdu_0 = 0 rx_ulofdma_data_ppdu_0 = 0 rx_ulofdma_mpdu_ok_0 = 0 rx_ulofdma_mpdu_fail_0 = 0 rx_ulofdma_non_data_nusers_0 = 0 rx_ulofdma_data_nusers_0 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-4-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Latency StatsDinesh Karthikeyan
Add support to request latency stats from firmware through HTT stats type 25. These stats give information about count of transmitted and received MAC Protocol Data Units(PDU) and Service Data Units(SDU) and other latency stats. Sample output: ------------- echo 25 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_LATENCY_CTX_TLV: duration = 0 tx_msdu_cnt = 0 tx_mpdu_cnt = 0 rx_msdu_cnt = 0 rx_mpdu_cnt = 0 HTT_STATS_LATENCY_PROF_TLV: Latency name = PROF_SCH_ENQ_TQM_CMDS count = 0 minimum = 4294967295 maximum = 0 ..... HTT_STATS_LATENCY_CNT_TLV: prof_enable_cnt = 39 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Sounding StatsDinesh Karthikeyan
Add support to request sounding stats from firmware through HTT stats type 22. These stats give sounding information of different Wi-Fi standards, channel vector upload status and correlation details. Sample output: ------------- echo 22 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_AC_SOUNDING_STATS_TLV: ac_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ac_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 ..... HTT_TX_AX_SOUNDING_STATS_TLV: ax_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ax_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 ..... HTT_TX_BE_SOUNDING_STATS_TLV: be_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 be_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0, 320MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0, 320MHz: 0 ..... CV UPLOAD HANDLER STATS: cv_nc_mismatch_err = 0 cv_fcs_err = 0 cv_frag_idx_mismatch = 0 cv_invalid_peer_id = 0 ..... CV QUERY STATS: cv_total_query = 0 cv_total_pattern_query = 0 cv_total_bw_query = 0 cv_invalid_bw_coding = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Enable MLO for single split-phy PCI deviceAaradhana Sahu
The single split-phy PCI device can perform multi-link operation (MLO) within its own radio, and the MLO-supporting firmware also supports MLO for split-phy PCI devices. Therefore, enable MLO for the single split-phy PCI device. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207050327.360987-4-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Remove dependency on single_chip_mlo_support for mlo_capable flagAaradhana Sahu
The mlo_capable flag in structure ath12k_hw_group indicate that a device is capable of operating in multi-link mode. Currently this is enabled based on single_chip_mlo_support advertised by the firmware within ath12k_qmi_phy_cap_send(). Since the firmware advertises multi-link operation (MLO) support through the ATH12K_FW_FEATURE_MLO feature in firmware-2.bin, there is no need to rely on the QMI phy capability (single_chip_mlo_support). Therefore remove the dependency on single_chip_mlo_support to set mlo_capable flag. Below is the impact on single split-phy PCI device with and without this patch: Note: This patch does not change the existing behavior of the single split-phy PCI device. 1. Driver without this patch + firmware with single_chip_mlo_support as false: MLO is not enabled. 2. Driver without this patch + firmware with single_chip_mlo_support as true: MLO works fine. 3. Driver with this patch + firmware with single_chip_mlo_support as false: MLO is not enabled. 4. Driver with this patch + firmware with single_chip_mlo_support as true: MLO works fine. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207050327.360987-3-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Enable MLO setup ready and teardown commands for single ↵Aaradhana Sahu
split-phy device When multi-link operation(MLO) is enabled through follow-up patches in the single split-phy device, the firmware expects hardware links (hw_links) information from the driver. If driver does not send WMI multi-link setup and ready command to the firmware during MLO setup for single split-phy device, the firmware will be unaware of the hw_links component of the multi-link operation. This may lead to firmware assert during multi-link association. Therefore, enable WMI setup, ready and teardown commands for single split-phy PCI device. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207050327.360987-2-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Fix locking in "QMI firmware ready" error pathsBart Van Assche
If ag->mutex has been locked, unlock it before returning. If it has not been locked, do not unlock it before returning. These bugs have been detected by the Clang thread-safety analyzer. Cc: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Fixes: ee146e11b4d9 ("wifi: ath12k: refactor core start based on hardware group") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250206221317.3845663-1-bvanassche@acm.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add support for MLO Multicast handling in driverBalamurugan Mahalingam
For MLO netdevice, the broadcast frame should be transmitted with the same sequence number on all the links. Per IEEE 802.11be-2024 section 10.3.2.14.2 "Transmitter requirements", An AP MLD shall use SNS11 in Table 10-5 (Transmitter sequence number spaces) maintained by the MLD to determine the sequence number of a group addressed data frame that is transmitted by an AP affiliated with the AP MLD so that the same group addressed Data frame transmitted over multiple links by the AP MLD uses the same sequence number for transmission on each link. Currently the MLO multicast handling is done in the mac80211 layer. Enable support for handling MLO Multicast in the driver to update the hardware descriptors in a custom way to handle the multicast frames. Firmware expects the MLO multicast frames to the submitted to the hardware with special vdev_id (actual vdev_id + 128) to recognize it as a host inspected frame to avoid using the reinjected path and it also uses the multicast global sequence number (GSN) provided by the host in the HTT metadata to process and transmit it with the same sequence number. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250203212647.2694566-3-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Update HTT_TCL_METADATA version and bit mask definitionsBalamurugan Mahalingam
Update the HTT_TCL_METADATA version to the latest version (2) as the bit definitions have changed a little to support more features. This new version allows the host to submit a packet with more information to the firmware. Firmware uses this additional information to do special processing for certain frames. All the firmware binaries available in upstream/public are compatible with this HTT version update. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250203212647.2694566-2-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor modeKang Yang
ath11k_hal_srng_* should be used with srng->lock to protect srng data. For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(), they use ath11k_hal_srng_* for many times but never call srng->lock. So when running (full) monitor mode, warning will occur: RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] Call Trace: ? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k] ? idr_alloc_u32+0x97/0xd0 ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k] ath11k_dp_service_srng+0x289/0x5a0 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k] __napi_poll+0x30/0x1f0 net_rx_action+0x198/0x320 __do_softirq+0xdd/0x319 So add srng->lock for them to avoid such warnings. Inorder to fetch the srng->lock, should change srng's definition from 'void' to 'struct hal_srng'. And initialize them elsewhere to prevent one line of code from being too long. This is consistent with other ring process functions, such as ath11k_dp_process_rx(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241219110531.2096-3-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath11k: fix RCU stall while reaping monitor destination ringP Praneesh
While processing the monitor destination ring, MSDUs are reaped from the link descriptor based on the corresponding buf_id. However, sometimes the driver cannot obtain a valid buffer corresponding to the buf_id received from the hardware. This causes an infinite loop in the destination processing, resulting in a kernel crash. kernel log: ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed Fix this by skipping the problematic buf_id and reaping the next entry, replacing the break with the next MSDU processing. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241219110531.2096-2-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: handle link removal in change_vif_links()Aditya Kumar Singh
Currently, the link interface is deleted during channel unassignment, which does not align with mac80211 link handling. Therefore, add changes to only perform vdev stop during channel unassignment. The actual vdev deletion will occur in change_vif_links(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-8-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: allocate new links in change_vif_links()Aditya Kumar Singh
Currently, links in an interface are allocated during channel assignment via assign_vif_chanctx(). Conversely, links are deleted during channel unassignment via unassign_vif_chanctx(). However, deleting links during channel unassignment does not comply with mac80211 link handling. Therefore, this process should be managed within change_vif_links(). To maintain symmetry, link addition should also be handled in change_vif_links(). Hence, add changes to allocate link arvif in change_vif_links(). Creating the link interface on firmware will still be done during channel assignment. And since link will be created but channel might not be assigned, there is a need now to test is_created flag in ath12k_mac_mlo_get_vdev_args() before accessing link_conf or else link bring up will fail. A subsequent change will handle link removal part. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-7-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: relocate a few functions in mac.cAditya Kumar Singh
An upcoming change will invoke ath12k_mac_init_arvif(), ath12k_mac_assign_link_vif(), ath12k_mac_unassign_link_vif(), and ath12k_mac_remove_link_interface() from a line located above their current definition. Hence, relocate these functions to above so that these can be invoked later on. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-6-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: use arvif instead of link_conf in ath12k_mac_set_key()Aditya Kumar Singh
Currently, in ath12k_mac_set_key(), if sta is not present, the address is retrieved from link_conf's bssid or addr member, depending on the interface type. When operating as an ML station and during shutdown, link_conf will not be available. This can result in the following error: ath12k_pci 0004:01:00.0: unable to access bss link conf in set key for vif AA:BB:CC:DD:EE:FF link 1 The primary purpose of accessing link_conf is to obtain the address for finding the peer. However, since arvif is always valid in this call, it can be used instead. Add change to use arvif instead of link_conf. A subsequent change will expose this issue but since tear down will give error, this is included first. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-5-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: remove redundant logic for initializing arvifAditya Kumar Singh
The current logic for initializing arvif is present in both the add interface operation callback and ath12k_mac_assign_link_vif(). The former handles deflink initialization, while the latter is responsible for other links. This redundancy could be avoided by using a common helper function. Hence, add a new helper ath12k_mac_init_arvif() which initializes a given arvif. Since synchronizing rcu is not required after adding a rcu pointer, remove that now. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-4-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-09-17 02:31:58 +0000