summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-02-16sfc: Add SR-IOV back-end support for SFC9000 familyBen Hutchings
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs), each with an RX queue, a TX queue, an event queue and a mailbox register. These may be assigned to up to 127 SR-IOV virtual functions per port, with up to 64 VIs per VF. We allocate an extra channel (IRQ and event queue only) to receive requests from VF drivers. There is a per-port limit of 4 concurrent RX queue flushes, and queue flushes may be initiated by the MC in response to a Function Level Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all flush requests via the MC. The RSS indirection table is shared with VFs, so the number of RX queues used in the PF is limited to the number of VIs per VF. This is almost entirely the work of Steve Hodgson, formerly shodgson@solarflare.com. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Allocate SRAM between buffer table and descriptor caches at init timeBen Hutchings
Each port has a block of 64-bit SRAM that is divided between buffer table and descriptor cache regions at initialisation time. Currently we use a fixed allocation, but it needs to be changed to support larger numbers of queues. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Pass NIC structure into efx_wanted_parallelism()Ben Hutchings
This lets us identify the NIC affected in case of failure, and will be necessary to adjust for SR-IOV constraints. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Add support for 'extra' channel typesBen Hutchings
Abstract some of the channel operations to allow for 'extra' channels that do not have RX or TX queues. - Try to assign a channel to each extra channel type that is enabled for the NIC, but gracefully degrade if we can't allocate sufficient MSI-X vectors - Allow each extra channel type to generate its own channel name - Allow channel types to disable reallocation and reinitialisation of their channels Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Make all CPU/IRQ/channel/queue counts unsignedBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Make buffer table indices and counts consistently unsignedBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Disable flow control during flushesSteve Hodgson
The TX DMA engine issues upstream read requests when there is room in the TX FIFO for the completion. However, the fetches for the rest of the packet might be delayed by any back pressure. Since a flush must wait for an EOP, the entire flush may be delayed by back pressure. Mitigate this by disabling flow control before the flushes are started. Since PF and VF flushes run in parallel introduce fc_disable, a reference count of the number of flushes outstanding. The same principle could be applied to Falcon, but that would bring with it its own testing. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Generalise event generation to cover VF-owned event queuesBen Hutchings
For SR-IOV we will need to send events to event queues that belong to VFs serviced by other drivers. Change the parameters of efx_generate_event() to allow this and declare it extern. While we're at it, remove the existing declaration under the wrong name efx_nic_generate_event(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Use proper function to test for RX channel in efx_poll()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Leave interrupts and event queues enabled whenever we canBen Hutchings
When SR-IOV is enabled we may receive FLR (Function-Level Reset) events, associated queue flush events and requests from VF drivers at any time. Therefore we need to keep event queues and interrupts enabled whenever possible. Currently we stop interrupt-driven event processing before flushing RX and TX queues; efx_nic_flush_queues() then polls event queues for flush events and discards any others it finds. Change it to work with the regular event handling functions. Currently efx_start_channel() fills RX queues synchronously when a device is brought up. This could now race with NAPI, so change it to send fill events. This was almost entirely written by Steve Hodgson, formerly shodgson@solarflare.com. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Generate RX fill events based on RX queues, not channelsBen Hutchings
This makes it harder to accidentally send such events to TX-only channels. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Generalise driver event generationBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Correct MAC filter bitfield definitionsBen Hutchings
The RMFT_DEST_MAC and TMFT_SRC_MAC register fields were previously documented as 44 bits wide, whereas a MAC address has 48 bits. Thankfully the hardware uses the correct width and the driver has used separate definitions that divide each of these into 32-bit and 16-bit fields. Fix the initial definitions for these fields and rewrite the latter definitions to use them. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Add support for TX MAC filtersBen Hutchings
On Siena each TX queue can be configured to send only packets for which there is a TX MAC filter that matches the source MAC address, queue ID, and optionally VID. This will be used to implement the 'spoofchk' feature for SR-IOV virtual functions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Add support for configuring RX unicast/multicast default filtersBen Hutchings
On Siena all received packets that don't match a more specific filter will match the unicast or multicast default filter. Currently we leave these set to the default values (RSS with base queue number of 0). Allow them to be reconfigured to select a single RX queue. These default filters are programmed through the FILTER_CTL register, but we represent them internally as an additional table of size 2. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/debugfs_sta.c net/mac80211/sta_info.h
2012-02-15cxgb3: update firmware versionDivy Le Ray
Hi Dave, This patch is sent in conjunction with the cxgb3 firmware update submission on linux-firmware. (https://lkml.org/lkml/2012/2/13/27) Cheers, Divy From: Divy Le Ray <divy@chelsio.com> This patch updates the firmware version cxgb3 is requesting to 7.12.0. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net/ethernet: ks8851_mll fix irq handlingJan Weitzel
There a two different irq variables ks->irq and netdev->irq. Only ks->irq is set on probe, so disabling irq in ks_start_xmit fails. This patches remove ks->irq from private data and use only netdev->irq. Tested on a kernel 3.0 based OMAP4430 SMP Board Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15renesas/sh_eth.c: fix linux/interrupt.h included twiceDanny Kukawka
Remove double include of linux/interrupt.h. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net: use eth_hw_addr_random() and reset addr_assign_typeDanny Kukawka
Use eth_hw_addr_random() instead of calling random_ether_addr() to set addr_assign_type correctly to NET_ADDR_RANDOM. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: allow all functions to display the phy FW versionMintz Yuval
The phy FW version is stored in regular memory, no MDC-MDIO access or any special locks are required to read it in the current implementation. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: removed code re-checking memory base after device openMintz Yuval
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: allow BCM84833 phy to advertise 100Base-T speedsMintz Yuval
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: notify cnic of address of info-to-the-mcpMintz Yuval
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: allocate smaller Rx rings for 1G functionsMintz Yuval
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: allocate memory dynamically in ethtool self-test.Mintz Yuval
From: Merav Sicron <meravs@broadcom.com> Current ethtool self tests usesa large buffer on stack. This patch replaces that array by dynamically allocated memory Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: force 10G on 84833 phy should be autoneg with only 10G advertisedMintz Yuval
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: added autoneg-restart after link advertisement changesMintz Yuval
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: ethtool publishes link partners speed and FCMintz Yuval
Following the changes in the ethtool source code, this patch enables the bnx2x driver to publish the Link partner's capabilities s, when ethtool is used on an interface which completed autoneg. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: half duplex support added for several boardsMintz Yuval
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Several boards require an additional HW bit written in-order to enable half duplex. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: consistent statistics after internal driver reloadMintz Yuval
Currently bnx2x statistics are reset by inner driver reload, e.g. by MTU change. This patch fixes this issue - from now on statistics should only be reset upon device closure. Thanks to Michal Schmidt <mschmidt@redhat.com> for his initial patch regarding this issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15veth: Enforce minimum size of VETH_INFO_PEERThomas Graf
VETH_INFO_PEER carries struct ifinfomsg plus optional IFLA attributes. A minimal size of sizeof(struct ifinfomsg) must be enforced or we may risk accessing that struct beyond the limits of the netlink message. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: update the driver version to Feb 2012 (v2)Giuseppe CAVALLARO
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: move hw init in the probe (v2)Giuseppe CAVALLARO
This patch moves the MAC HW initialization and the HW feature verification from the open to the probe function as D. Miller suggested. So the patch actually reorganizes and tidies-up some parts of the driver and indeed fixes some problem when tune its HW features. These can be overwritten by looking at the HW cap register at run-time and that generated problems. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: request_irq when use an ext wake irq line (v2)Francesco Virlinzi
In case of we use an external Wake-Up IRQ line (priv->wol_irq != dev->irq) we need to invoke the request_irq. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: do not discard frame on dribbling bit assertGiuseppe CAVALLARO
If this bit is set and the CRC error is reset, then the packet is valid. Only report this as stat info. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15ipheth: Add iPhone 4STim Gardner
BugLink: http://bugs.launchpad.net/bugs/900802 Cc: stable@vger.kernel.org 3.2+ Signed-off-by: Till Kamppeter <till.kamppeter@gmail.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: add unicast steering entries to resource_trackerEugenia Emantayev
Add unicast steering entries to resource tracker. Do qp_detach also for these entries when VF doesn't shut down gracefully. Otherwise there is leakage of these resources, since they are not tracked. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: fix QP tree trashingEugenia Emantayev
When adding new unicast steer entry, before moving qp to state ready, actually before calling mlx4_RST2INIT_QP_wrapper(), there were added a lot of entries with local_qpn=0 into radix tree. This fact impacted the get_res() function and proper functioning of resource tracker in addition to adding trash entries into radix tree. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@melllanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: fix buffer overrunEugenia Emantayev
When passing MLX4_UC_STEER=1 it was translated to value 2 after mlx4_QP_ATTACH_wrapper. Therefore in new_steering_entry() unicast steer entries were added to index 2 of array of size 2. Fixing this bug by shift right to one position. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15ath9k: stop on rates with idx -1 in ath9k rate control's .tx_statusPavel Roskin
Rate control algorithms are supposed to stop processing when they encounter a rate with the index -1. Checking for rate->count not being zero is not enough. Allowing a rate with negative index leads to memory corruption in ath_debug_stat_rc(). One consequence of the bug is discussed at https://bugzilla.redhat.com/show_bug.cgi?id=768639 Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-15mwifiex: clear previous security setting during associationAmitkumar Karwar
Driver maintains different flags for WEP, WPA, WPA2 security modes. Appropriate flag is set using security information provided in connect request. mwifiex_is_network_compatible() routine uses them to check if driver's setting is compatible with AP. Association is aborted if the routine fails. For some corner cases, it is observed that association is failed even for valid security information based on association history. This patch fixes the problem by clearing previous security setting during each association. We should set WEP key provided in connect request as default tx key. This missing change is also added here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-02-15wl12xx: remove some dead code in wl1271_plt_init()Dan Carpenter
"ret" has already been checked at this point, and we don't need to check it again. This was left around from a previous patch 49d750ca14 "wl12xx: 1281/1283 support - New radio structs and functions". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: delete wl->vif (and allow multiple vifs)Eliad Peller
Delete the global wl->vif (and the checks on it), so multiple vifs could be added. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: enter forced-psm on fw changeEliad Peller
Enter forced psm when changing fw, in order to make the sta a bit more disconnection-persistent. (DPM doesn't know about the incoming recovery, so it won't enter psm by itself) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: dynamically change fw according to number of active rolesEliad Peller
wl12xx uses different fw for single-role and multi-role scenarios (due to lack of space, some of the fw advanced features are disabled in the multi-role fw). Add checks on add_interfae and remove_interface in order to determine whether a fw switch is needed (and initiate recovery in this case). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: Use a dedicated fw for PLTEliad Peller
A special PLT firmware is used for calibration. Add multiple fw support by introducing a new fw_type member, representing the currently saved fw (the actual fw state can be determined by wl->state). Signed-off-by: Gery Kahn <geryk@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: add split_scan_timeout debugfs fileEyal Shapira
Add control over split_scan_timeout through debugfs. Values are in ms while 0 will disable split scan. Signed-off-by: Eyal Shapira <eyal@wizey.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
generated by cgit (git 2.34.1) at 2025-09-23 10:22:19 +0000