summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-01-26Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-01-25 This series contains updates to the ice driver to add support for RSS. Henry and Tony enable the driver to write the filtering hardware tables to allow for changing of RSS rules, also introduced and initialized the structures for storing the configuration. Then followed it up by creating an extraction sequence based on the packet header protocols to be programmed. Next was storing the TCAM entry with the profile data and VSI group in the respective software structures. Md Fahad sets up the configuration to support RSS tables for the virtual function (VF) driver (iavf). Add support for flow types TCP4, TCP6, UDP4, UDP6, SCTP4 and SCTP6 for RSS via ethtool. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26ath11k: enable HE tlvs in ppdu stats for pktlog liteAnilkumar Kolli
This patch enables HE tlvs in ppdu stats for pktlog lite mode. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26ath11k: fix debugfs build failureArnd Bergmann
When CONFIG_ATH11K_DEBUGFS is disabled, but CONFIG_MAC80211_DEBUGFS is turned on, the driver fails to build: drivers/net/wireless/ath/ath11k/debugfs_sta.c: In function 'ath11k_dbg_sta_open_htt_peer_stats': drivers/net/wireless/ath/ath11k/debugfs_sta.c:416:4: error: 'struct ath11k' has no member named 'debug' ar->debug.htt_stats.stats_req = stats_req; ^~ It appears that just using the former symbol is sufficient here, adding a Kconfig dependency takes care of the corner cases. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26ath10k: Don't call SCM interface for statically mapped msa regionGovind Singh
For some targets ex: QCS404, SCM permissions for MSA region is statically configured in TrustZone fw. Add SCM call disable option for such targets to avoid duplicate permissions. Testing: Tested on WCN3990 HW Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26Revert "ath10k: fix DMA related firmware crashes on multiple devices"Zhi Chen
This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs. For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1. Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040 Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26ath10k: drop RX skb with invalid length for sdioWen Gong
When simulate random transfer fail for sdio write and read, it crash sometimes. Test steps: 1. Add config and update kernel: CONFIG_FAIL_MMC_REQUEST=y CONFIG_FAULT_INJECTION=y CONFIG_FAULT_INJECTION_DEBUG_FS=y 2. run simulate fail: cd /sys/kernel/debug/mmc1/fail_mmc_request echo 10 > probability echo 10 > times # repeat until hitting issues 3. it crash, the act len of ath10k_htc_hdr is higher than allocate len, it cause panic: [ 99.723482] skbuff: skb_over_panic: text:00000000caa0f780 len:57013 put:57013 head:000000004116f24a data:0000000019ecb4dc tail:0xdef5 end:0x640 dev:<NULL> [ 99.737697] ------------[ cut here ]------------ [ 99.742327] kernel BUG at /mnt/host/source/src/third_party/kernel/v4.19/net/core/skbuff.c:104! [ 99.750937] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 99.831154] Process kworker/0:2 (pid: 151, stack limit = 0x00000000728010bf) [ 99.838200] CPU: 0 PID: 151 Comm: kworker/0:2 Tainted: G W 4.19.85 #48 [ 99.846022] Hardware name: MediaTek krane sku0 board (DT) [ 99.851429] Workqueue: events sdio_irq_work [ 99.855614] pstate: 60000005 (nZCv daif -PAN -UAO) [ 99.860402] pc : skb_panic+0x64/0x68 [ 99.863974] lr : skb_panic+0x64/0x68 [ 99.867542] sp : ffffff8008833a90 [ 99.870850] x29: ffffff8008833ac0 x28: ffffffe52e337370 [ 99.876159] x27: ffffffe52e328a90 x26: 000000000000e0d0 [ 99.881469] x25: ffffffe52e336b60 x24: 000000000000deb5 [ 99.886779] x23: ffffffe52e340680 x22: ffffffe4efd47e00 [ 99.892088] x21: 000000000000deb5 x20: ffffffa516d85b4c [ 99.897397] x19: ffffffa526928037 x18: 0000000000000000 [ 99.902706] x17: 000000000000003c x16: ffffffa5265b6c80 [ 99.908015] x15: 0000000000000006 x14: 3a76656420303436 [ 99.913325] x13: 0000000000029bf0 x12: 0000000000000000 [ 99.918634] x11: 0000000000000000 x10: 0000000000000000 [ 99.923943] x9 : a3b907e4b2783000 x8 : a3b907e4b2783000 [ 99.929253] x7 : 0000000000000000 x6 : ffffffa526f66d76 [ 99.934563] x5 : 0000000000000000 x4 : 0000000000000000 [ 99.939872] x3 : 000000000002a5ab x2 : ffffffe53feed918 [ 99.945182] x1 : ffffffe53fee4a08 x0 : 000000000000008e [ 99.950491] Call trace: [ 99.952937] skb_panic+0x64/0x68 [ 99.956165] skb_put+0x7c/0x84 [ 99.959224] ath10k_sdio_irq_handler+0x740/0xbb8 [ath10k_sdio] [ 99.965055] process_sdio_pending_irqs+0x58/0x1a4 [ 99.969758] sdio_run_irqs+0x34/0x60 [ 99.973329] sdio_irq_work+0x1c/0x28 [ 99.974930] cros-ec-spi spi2.0: SPI transfer timed out [ 99.976904] process_one_work+0x210/0x410 [ 99.976911] worker_thread+0x234/0x3dc [ 99.976923] kthread+0x120/0x130 [ 99.982090] cros-ec-spi spi2.0: spi transfer failed: -110 [ 99.986054] ret_from_fork+0x10/0x18 [ 99.986063] Code: aa1403e2 2a1503e4 a90023e9 97e37d1a (d4210000) [ 99.986068] ---[ end trace cb6d948c5a0fd6c7 ]--- [ 100.017250] Kernel panic - not syncing: Fatal exception [ 100.018879] cros-ec-spi spi2.0: Command xfer error (err:-110) [ 100.023659] SMP: stopping secondary CPUs [ 100.023703] Kernel Offset: 0x251dc00000 from 0xffffff8008000000 [ 100.023707] CPU features: 0x0,2188200c [ 100.023709] Memory Limit: none The simulate fail of sdio is not a real sdio transter fail, it only set an error status in mmc_should_fail_request after the transfer end, actually the transfer is success, then sdio_io_rw_ext_helper will return error status and stop transfer the left data. For example, the really RX len is 286 bytes, then it will split to 2 blocks in sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the first 256 bytes get an error status by mmc_should_fail_request,then the left 30 bytes will not read in this RX operation. Then when the next RX arrive, the left 30 bytes will be considered as the header of the read, the top 8 bytes will be considered as ath10k_htc_hdr, but actually the 8 bytes is not the ath10k_htc_hdr, so the act_len from this ath10k_htc_hdr is not correct, if it is a big value, such as 57013, it will trigger skb_panic. Drop the skb with invalid length will be reasonable. This patch only effect sdio chips. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26ath10k: use true,false for bool variablezhengbin
Fixes coccicheck warning: drivers/net/wireless/ath/ath10k/htt_rx.c:2143:2-31: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26ath10k: Add optional qdss clkBjorn Andersson
The WiFi firmware found on sm8150 requires that the QDSS clock is ticking in order to operate, so add an optional clock to the binding to allow this to be specified in the sm8150 dts and add the clock to the list of clocks in the driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26ath10k: pci: Fix comment on ath10k_pci_dump_memory_sramBryan O'Donoghue
The description of ath10k_pci_dump_memory_sram() is inaccurate, an error can never be returned, it is always the length. Update the comment to reflect. Fixes: 219cc084c6706 ("ath10k: add memory dump support QCA9984") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26ath10k: pci: Only dump ATH10K_MEM_REGION_TYPE_IOREG when safeBryan O'Donoghue
ath10k_pci_dump_memory_reg() will try to access memory of type ATH10K_MEM_REGION_TYPE_IOREG however, if a hardware restart is in progress this can crash a system. Individual ioread32() time has been observed to jump from 15-20 ticks to > 80k ticks followed by a secure-watchdog bite and a system reset. Work around this corner case by only issuing the read transaction when the driver state is ATH10K_STATE_ON. Tested-on: QCA9988 PCI 10.4-3.9.0.2-00044 Fixes: 219cc084c6706 ("ath10k: add memory dump support QCA9984") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26wil6210: use true,false for bool variablezhengbin
Fixes coccicheck warning: drivers/net/wireless/ath/wil6210/main.c:765:1-14: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/ath/wil6210/txrx.c:1143:1-19: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/ath/wil6210/wmi.c:1516:4-23: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/ath/wil6210/wmi.c:1523:4-23: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/ath/wil6210/wmi.c:1538:4-30: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/ath/wil6210/wmi.c:1545:4-30: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26ath9k: use true,false for bool variablezhengbin
Fixes coccicheck warning: drivers/net/wireless/ath/ath9k/ar9003_aic.c:409:2-12: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26Merge tag 'iwlwifi-next-for-kalle-2020-01-11' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First set of patches intended for v5.6 * Support new versions of the FTM FW APIs; * Fix an old bug in D3 (WoWLAN); * A couple of fixes/improvements in the receive-buffers code; * Fix in the debugging where we were skipping one TXQ; * Support new version of the beacon template FW API; * Print some extra information when the driver is loaded; * Some debugging infrastructure (aka. yoyo) updates; * Support for a new HW version; * Second phase of device configuration work started; * Some clean-ups;
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25ice: Bump versionTony Nguyen
Bump version to 0.8.2-k Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-25ice: Implement ethtool get/set rx-flow-hashMd Fahad Iqbal Polash
Provide support to change or retrieve RSS hash options for a flow type. The supported flow-types are: tcp4, tcp6, udp4, udp6, sctp4, sctp6. Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-25ice: Initilialize VF RSS tablesMd Fahad Iqbal Polash
Set configuration for hardware RSS tables for VFs. Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-25ice: Optimize table usageTony Nguyen
Attempt to optimize TCAM entries and reduce table resource usage by searching for profiles that can be reused. Provide resource cleanup of both hardware and software structures. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-25ice: Enable writing filtering tablesTony Nguyen
Write the hardware tables based on the populated software structures. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-25ice: Populate TCAM filter software structuresTony Nguyen
Store the TCAM entry with the profile data and the VSI group in the respective SW structures. This will be subsequently used to write out the tables to hardware. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-25Merge tag 'mlx5-fixes-2020-01-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-01-24 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. Merge conflict: once merge with net-next, a contextual conflict will appear in drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c since the code moved in net-next. To resolve, just delete ALL of the conflicting hunk from net. So sorry for the small mess .. For -stable v5.4: ('net/mlx5: Update the list of the PCI supported devices') ('net/mlx5: Fix lowest FDB pool size') ('net/mlx5e: kTLS, Fix corner-case checks in TX resync flow') ('net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path') ('net/mlx5: Eswitch, Prevent ingress rate configuration of uplink rep') ('net/mlx5e: kTLS, Remove redundant posts in TX resync flow') ('net/mlx5: DR, Enable counter on non-fwd-dest objects') ('net/mlx5: DR, use non preemptible call to get the current cpu number') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum_qdisc: Support offloading of TBF QdiscPetr Machata
React to the TC messages that were introduced in a preceding patch and configure egress maximum shaper as appropriate. TBF can be used as a root qdisc or under one of PRIO or strict ETS bands. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum: Configure shaper rate and burst size togetherPetr Machata
In order to allow configuration of burst size together with shaper rate, extend mlxsw_sp_port_ets_maxrate_set() with a burst_size argument. Convert call sites to pass 0 (for default). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum: Add lowest_shaper_bs to struct mlxsw_spPetr Machata
Lower limit of burst size configuration is dependent on system type. Add a datum to track the value. Initialize as appropriate in mlxsw_spX_init(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: reg: Increase MLXSW_REG_QEEC_MAS_DISPetr Machata
As the port speeds grow, the current value of "unlimited shaper", 200000000Kbps, might become lower than the actually supported speeds. Bump it to the maximum value that fits in the corresponding QEEC field, which is about 2.1Tbps. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: reg: Add max_shaper_bs to QoS ETS Element ConfigurationPetr Machata
The QEEC register configures scheduling elements. One of the bits of configuration is the burst size to use for the shaper installed on the element. Add the necessary fields to support this configuration. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum_qdisc: Extract a common leaf unoffload functionPetr Machata
When the RED Qdisc is unoffloaded, it needs to reduce the reported backlog by the amount that is in the HW, so that only the SW backlog is contained in the counter. The same thing will need to be done by TBF, and likely any other leaf Qdisc as well. Extract a helper mlxsw_sp_qdisc_leaf_unoffload() and call it from mlxsw_sp_qdisc_red_unoffload(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum_qdisc: Add mlxsw_sp_qdisc_get_class_stats()Petr Machata
Add a wrapper around mlxsw_sp_qdisc_collect_tc_stats() and mlxsw_sp_qdisc_update_stats() for the simple case of doing both in one go: mlxsw_sp_qdisc_get_class_stats(). Dispatch to that function from mlxsw_sp_qdisc_get_red_stats(). This new function will be useful for other leaf Qdiscs as well. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum_qdisc: Extract a per-TC stat functionPetr Machata
Extract from mlxsw_sp_qdisc_get_prio_stats() two new functions: mlxsw_sp_qdisc_collect_tc_stats() to accumulate stats for that one TC only, and mlxsw_sp_qdisc_update_stats() that makes the stats relative to base values stored earlier. Use them from mlxsw_sp_qdisc_get_red_stats(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEMMichael Ellerman
The cxgb3 driver for "Chelsio T3-based gigabit and 10Gb Ethernet adapters" implements a custom ioctl as SIOCCHIOCTL/SIOCDEVPRIVATE in cxgb_extension_ioctl(). One of the subcommands of the ioctl is CHELSIO_GET_MEM, which appears to read memory directly out of the adapter and return it to userspace. It's not entirely clear what the contents of the adapter memory contains, but the assumption is that it shouldn't be accessible to all users. So add a CAP_NET_ADMIN check to the CHELSIO_GET_MEM case. Put it after the is_offload() check, which matches two of the other subcommands in the same function which also check for is_offload() and CAP_NET_ADMIN. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25hv_netvsc: Add XDP supportHaiyang Zhang
This patch adds support of XDP in native mode for hv_netvsc driver, and transparently sets the XDP program on the associated VF NIC as well. Setting / unsetting XDP program on synthetic NIC (netvsc) propagates to VF NIC automatically. Setting / unsetting XDP program on VF NIC directly is not recommended, also not propagated to synthetic NIC, and may be overwritten by setting of synthetic NIC. The Azure/Hyper-V synthetic NIC receive buffer doesn't provide headroom for XDP. We thought about re-use the RNDIS header space, but it's too small. So we decided to copy the packets to a page buffer for XDP. And, most of our VMs on Azure have Accelerated Network (SRIOV) enabled, so most of the packets run on VF NIC. The synthetic NIC is considered as a fallback data-path. So the data copy on netvsc won't impact performance significantly. XDP program cannot run with LRO (RSC) enabled, so you need to disable LRO before running XDP: ethtool -K eth0 lro off XDP actions not yet supported: XDP_REDIRECT Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25net: bcmgenet: Use netif_tx_napi_add() for TX NAPIFlorian Fainelli
Before commit 7587935cfa11 ("net: bcmgenet: move NAPI initialization to ring initialization") moved the code, this used to be netif_tx_napi_add(), but we lost that small semantic change in the process, restore that. Fixes: 7587935cfa11 ("net: bcmgenet: move NAPI initialization to ring initialization") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25net: fddi: skfp: Use print_hex_dump() helperAndy Shevchenko
Use the print_hex_dump() helper, instead of open-coding the same operations. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25net: stmmac: platform: fix probe for ACPI devicesAjay Gupta
Use generic device API to get phy mode to fix probe failure with ACPI based devices. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Expedited grace-period updates - kfree_rcu() updates - RCU list updates - Preemptible RCU updates - Torture-test updates - Miscellaneous fixes - Documentation updates Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-24ice: Allocate flow profileTony Nguyen
Create an extraction sequence based on the packet header protocols to be programmed and allocate a flow profile for the extraction sequence. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-24ice: Enable writing hardware filtering tablesTony Nguyen
Enable the driver to write the filtering hardware tables to allow for changing of RSS rules. Upon loading of DDP package, a minimal configuration should be written to hardware. Introduce and initialize structures for storing configuration and make the top level calls to configure the RSS tables to initial values. A packet segment will be created but nothing is written to hardware yet. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-24net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel pathTariq Toukan
When TCP out-of-order is identified (unexpected tcp seq mismatch), driver analyzes the packet and decides what handling should it get: 1. go to accelerated path (to be encrypted in HW), 2. go to regular xmit path (send w/o encryption), 3. drop. Packets marked with skb->decrypted by the TLS stack in the TX flow skips SW encryption, and rely on the HW offload. Verify that such packets are never sent un-encrypted on the wire. Add a WARN to catch such bugs, and prefer dropping the packet in these cases. Fixes: 46a3ea98074e ("net/mlx5e: kTLS, Enhance TX resync flow") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-24net/mlx5e: kTLS, Remove redundant posts in TX resync flowTariq Toukan
The call to tx_post_resync_params() is done earlier in the flow, the post of the control WQEs is unnecessarily repeated. Remove it. Fixes: 700ec4974240 ("net/mlx5e: kTLS, Fix missing SQ edge fill") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-24net/mlx5e: kTLS, Fix corner-case checks in TX resync flowTariq Toukan
There are the following cases: 1. Packet ends before start marker: bypass offload. 2. Packet starts before start marker and ends after it: drop, not supported, breaks contract with kernel. 3. packet ends before tls record info starts: drop, this packet was already acknowledged and its record info was released. Add the above as comment in code. Mind possible wraparounds of the TCP seq, replace the simple comparison with a call to the TCP before() method. In addition, remove logic that handles negative sync_len values, as it became impossible. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Fixes: 46a3ea98074e ("net/mlx5e: kTLS, Enhance TX resync flow") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-24net/mlx5e: Clear VF config when switching modesDmytro Linkin
Currently VF in LEGACY mode are not able to go up. Also in OFFLOADS mode, when switching to it first time, VF can go up independently to his representor, which is not expected. Perform clearing of VF config when switching modes and set link state to AUTO as default value. Also, when switching to OFFLOADS mode set link state to DOWN, which allow VF link state to be controlled by its REP. Fixes: 1ab2068a4c66 ("net/mlx5: Implement vports admin state backup/restore") Fixes: 556b9d16d3f5 ("net/mlx5: Clear VF's configuration on disabling SRIOV") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-24net/mlx5: DR, use non preemptible call to get the current cpu numberErez Shitrit
Use raw_smp_processor_id instead of smp_processor_id() otherwise we will get the following trace in debug-kernel: BUG: using smp_processor_id() in preemptible [00000000] code: devlink caller is dr_create_cq.constprop.2+0x31d/0x970 [mlx5_core] Call Trace: dump_stack+0x9a/0xf0 debug_smp_processor_id+0x1f3/0x200 dr_create_cq.constprop.2+0x31d/0x970 genl_family_rcv_msg+0x5fd/0x1170 genl_rcv_msg+0xb8/0x160 netlink_rcv_skb+0x11e/0x340 Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-24net/mlx5: E-Switch, Prevent ingress rate configuration of uplink repEli Cohen
Since the implementation relies on limiting the VF transmit rate to simulate ingress rate limiting, and since either uplink representor or ecpf are not associated with a VF, we limit the rate limit configuration for those ports. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-24net/mlx5: DR, Enable counter on non-fwd-dest objectsErez Shitrit
The current code handles only counters that attached to dest, we still have the cases where we have counter on non-dest, like over drop etc. Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-24net/mlx5: Update the list of the PCI supported devicesMeir Lichtinger
Add the upcoming ConnectX-7 device ID. Fixes: 85327a9c4150 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Meir Lichtinger <meirl@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-24net/mlx5: Fix lowest FDB pool sizePaul Blakey
The pool sizes represent the pool sizes in the fw. when we request a pool size from fw, it will return the next possible group. We track how many pools the fw has left and start requesting groups from the big to the small. When we start request 4k group, which doesn't exists in fw, fw wants to allocate the next possible size, 64k, but will fail since its exhausted. The correct smallest pool size in fw is 128 and not 4k. Fixes: e52c28024008 ("net/mlx5: E-Switch, Add chains and priorities") Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-24l2t_seq_next should increase position indexVasily Averin
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24seq_tab_next() should increase position indexVasily Averin
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24i40e: fix spelling mistake "to" -> "too"Colin Ian King
There is a spelling mistake in a hw_dbg message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23Merge tag 'mlx5-updates-2020-01-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-01-22 This series provides updates to mlx5 driver. 1) Misc small cleanups 2) Some SW steering updates including header copy support 3) Full ethtool statistics support for E-Switch uplink representor Some refactoring was required to share the bare-metal NIC ethtool stats with the Uplink representor. On Top of this Vlad converts the ethtool stats support in E-Swtich vports representors to use the mlx5e "stats groups" infrastructure and then applied all applicable stats to the uplink representor netdev. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 09:49:39 +0000