summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-11-27bpf: drop unnecessary context cast from BPF_PROG_RUNDaniel Borkmann
Since long already bpf_func is not only about struct sk_buff * as input anymore. Make it generic as void *, so that callers don't need to cast for it each time they call BPF_PROG_RUN(). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27sfc: remove unneeded variableDan Carpenter
We don't use ->heap_buf after commit 46d1efd852cc ("sfc: remove Software TSO") so let's remove the last traces. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27Merge tag 'wireless-drivers-next-for-davem-2016-11-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.10 Major changes: iwlwifi * finalize and enable dynamic queue allocation * use dev_coredumpmsg() to prevent locking the driver * small fix to pass the AID to the FW * use FW PS decisions with multi-queue ath9k * add device tree bindings * switch to use mac80211 intermediate software queues to reduce latency and fix bufferbloat wl18xx * allow scanning in AP mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27driver: macvtap: Unregister netdev rx_handler if macvtap_newlink failsGao Feng
The macvtap_newlink registers the netdev rx_handler firstly, but it does not unregister the handler if macvlan_common_newlink failed. Signed-off-by: Gao Feng <fgao@ikuai8.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27net: qcom/emac: fix of_node and phydev leaksJohan Hovold
Make sure to drop the reference taken by of_phy_find_device() during probe on probe errors and on driver unbind. Also drop the of_node reference taken by of_parse_phandle() in the same path. Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27net: fsl/fman: fix fixed-link-phydev reference leakJohan Hovold
Make sure to drop the reference taken by of_phy_find_device() when looking up a fixed-link phydev during probe. Fixes: 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27net: fsl/fman: fix phydev reference leakJohan Hovold
Make sure to drop the reference taken by of_phy_find_device() during initialisation when later freeing the struct fman_mac. Fixes: 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27net: bcmgenet: fix phydev reference leakJohan Hovold
Make sure to drop the reference taken by of_phy_find_device() when initialising MOCA PHYs. Fixes: 6ac9de5f6563 ("net: bcmgenet: Register link_update callback for all MoCA PHYs") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27irda: fix overly long udelay()Arnd Bergmann
irda_get_mtt() returns a hardcoded '10000' in some cases, and with gcc-7, we get a build error because this triggers a compile-time check in udelay(): drivers/net/irda/w83977af_ir.o: In function `w83977af_hard_xmit': w83977af_ir.c:(.text.w83977af_hard_xmit+0x14c): undefined reference to `__bad_udelay' Older compilers did not run into this because they either did not completely inline the irda_get_mtt() or did not consider the 10000 value a constant expression. The code has been wrong since the start of git history. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27driver: ipvlan: Fix one possible memleak in ipvlan_link_newGao Feng
When ipvlan_link_new fails and creates one ipvlan port, it does not destroy the ipvlan port created. It causes mem leak and the physical device contains invalid ipvlan data. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27ptp: gianfar: Use high resolution frequency method.Ulrik De Bie
This patch depends on commit d8d263541913 ("ptp: Introduce a high resolution frequency adjustment method.") The gianfar devices offer a frequency resolution of about 0.46 ppb (depends on actual value of tmr_add, for the calculation assumed 0x80000000). This patch lets users of the device benefit from the increased frequency resolution when tuning the clock. Thanks to the rounding the maximum error between the requested frequency and the applied frequency will then be about 0.23 ppb. Tested on a v3.3.8 kernel on a real gianfar device. Verified compilation on net-next (currently at v4.9-rc5). Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27mlx4: do not use priv->stats_lock in mlx4_en_auto_moderation()Eric Dumazet
Per RX ring packets/bytes counters are not protected by global priv->stats_lock. Better not confuse the reader, and use READ_ONCE() to show we read these counters without surrounding synchronization. Interrupt moderation is best effort, and we do not really care of ultra precise counters. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
udplite conflict is resolved by taking what 'net-next' did which removed the backlog receive method assignment, since it is no longer necessary. Two entries were added to the non-priv ethtool operations switch statement, one in 'net' and one in 'net-next, so simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: spectrum: Add policers for trap groupsNogah Frankel
Configure policers and connect them to trap groups. While many trap groups share policer's configuration they don't share the actual policer because each trap group represents a different flow / protocol and we don't want one of them to be able to exceed its rate on behalf of another. For example, if STP and LLDP gets to send 128 packets/sec each, if we put them in one 256 packets/sec policer, one can send 200 packets while the other only 50. Note that IP2ME covers lots of flows, so it's limit is set to match the cpu ability to handle data. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: reg: Add QoS Policer Configuration RegisterNogah Frankel
The QPCR register is used to create and control policers. A policer can discard or change the color of packets that are trapped by a specific trap. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: resources: Add max cpu policers resourceNogah Frankel
Add a new resource to resources query: max cpu policers which tells us how many policers can be used to limit the data rate to the cpu port. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: Create a different trap group list for each deviceNogah Frankel
Trap groups can be used to control traps priority, both in terms of which trap "wins" if a packet matches two traps (priority) and in terms of packets from which trap group will be scheduled to the cpu first (tc). They can also be used to set rate limiters (policers) on them (will be added in the next patches). Currently, we support two trap groups. In Spectrum we want a better resolution, so every protocol / flow will have a different trap group, so we can control its parameters separately. Once the policers will be implemented, it will also allow us limit the rate of each protocol by itself. This patch change the trap group list to include: * the emad trap group, which is shared for all the devices. * Switchx2's trap groups, which are a copy of the current trap groups. * Spectrum's new trap groups, in order to match the above guidelines. (Switchib is using only the emad trap group, so it require no changes). This patch also includes new configuration for Spectrum's trap groups, with primary priority order within them. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: spectrum: Add BGP trapNogah Frankel
Add a trap for BGP protocol that was previously trapped by the generic trap for IP2ME. This trap will allow us to have better control (over priority and rate) of the traffic. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: Change trap groups settingNogah Frankel
Trap groups have many options which we currently set to default values. In the next patches we will use many of them with non-default values. Some of these options have no default value, so this patch sets them as params for the trap group set function. Others almost always use the same values, so the set function will use this default values. In the rare cases when they will need to be with other values, these values can be set directly (using the macros for fields in registers). Parameters without default value: TC - the traffic class for packets that hit this trap group. (old default is the max tc) priority - if one packet hits multiple trap groups, the group with the higher priority will "catch" it. (old default is 0) policer - limit rate policer (old default is disabled) Default parameters: swid - switch id, relevant for the emad trap only, ignored on Spectrum. (new default is 0) rdq - CPU receive descriptor queue (new default is identical to trap group id) Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: resources: Add max trap groups resourceNogah Frankel
Add the max number of trap groups to resource query. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: core: Change emad trap group settingsNogah Frankel
Currently, the emad trap init was done in the core. In the future we will want to add some changes to the traps groups, according to device type. This commit create a driver function to create the trap group for the emad, so later it can be changed by devices. It also changes the emad registration to use the new generic functions. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: Add option to choose trap groupNogah Frankel
Currently, we set the trap group to pre-determined option, based on whether it is an rx or event trap. This commit adds a possibility to chose the trap group, so it can be set to different values in the following patches. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: Change trap set functionNogah Frankel
Change trap setting function so instead of determining the trap group by trap id, it gets it as a parameter (so later we can have different trap groups for Spectrum and Switchx2). Add "is_ctrl" parameter to the trap setting function. It control whether the trapped packets wait in a designated control buffer or in their default one. This parameter is ignored by Switchx2 and Switchib. Add these parameters to the traps array in Spectrum, Switchx2 and Switchib. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: switchib: Use generic listener struct for eventsNogah Frankel
Change the event handling in Switchib to be comptible with Spectrum and Switchx2. Use the generic listener struct for the events. Init and fini them by loop (and not by calling each event by its name). Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: switchx2: Use generic listener struct for eventsNogah Frankel
Change the events to use the generic listener struct. Merge the event list into the trap list, so the same functions will handle both. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: spectrum: Use generic listener struct for eventsNogah Frankel
Change the events to use the generic listener struct. Merge the event list into the trap list, so the same functions will handle both. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: core: Introduce generic macro for eventNogah Frankel
Create a macro for creating the generic listener struct for events, similar to the one for rx traps. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: switchx2: Use generic listener struct for rx trapsNogah Frankel
Reorganize the traps to use the new generic listener struct and functions. Use macros to shorten the traps list. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: spectrum: Use generic listener struct for rx trapsNogah Frankel
Replace the old rx listener struct definitions by the generic ones. Use the new generic registering / unregistering functions for them. Add some macros to organize the trap list. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: core: Expose generic macros for rx trapNogah Frankel
In Spectrum, there is a macro to arrange the traps list. This macro is useful for everyone who is using rx traps. Create a similar macro in core.h for creating the generic listener struct for rx traps. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: core: Create a generic function to register / unregister trapsNogah Frankel
We have 2 types of HW traps to handle, rx traps and events. The registration workflow for both is very similar. So it only make sense to create one function to handle both. This patch creates a struct to hold the data for both cases. It also creates a registration and an un-registration functions that get this generic struct as input. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: spectrum: Remove unused trapsNogah Frankel
Since commit 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") we no longer rely on flooding traffic to the CPU in order to trap packets intended for the host itself. Therefore, the FDB MC trap can be removed. Remove traps for protocols that are not supported yet. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mvpp2: use correct size for memsetArnd Bergmann
gcc-7 detects a short memset in mvpp2, introduced in the original merge of the driver: drivers/net/ethernet/marvell/mvpp2.c: In function 'mvpp2_cls_init': drivers/net/ethernet/marvell/mvpp2.c:3296:2: error: 'memset' used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size] The result seems to be that we write uninitialized data into the flow table registers, although we did not get any warning about that uninitialized data usage. Using sizeof() lets us initialize then entire array instead. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25net/mlx5: drop duplicate header delay.hGeliang Tang
Drop duplicate header delay.h from mlx5/core/main.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Matan Barak <matanb@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25net: ieee802154: drop duplicate header delay.hGeliang Tang
Drop duplicate header delay.h from adf7242.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25ibmvnic: drop duplicate header seq_file.hGeliang Tang
Drop duplicate header seq_file.h from ibmvnic.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25fsl/fman: fix a leak in tgec_free()Dan Carpenter
We set "tgec->cfg" to NULL before passing it to kfree(). There is no need to set it to NULL at all. Let's just delete it. Fixes: 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25net/mlx5: remove a duplicate conditionDan Carpenter
We verified that MLX5_FLOW_CONTEXT_ACTION_COUNT was set on the first line of the function so we don't need to check again here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25net: thunderx: Pause frame supportSunil Goutham
Enable pause frames on both Rx and Tx side, configure pause interval e.t.c. Also support for enable/disable pause frames on Rx/Tx via ethtool has been added. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25net: thunderx: Configure RED and backpressure levelsSunil Goutham
This patch enables moving average calculation of Rx pkt's resources and configures RED and backpressure levels for both CQ and RBDR. Also initialize SQ's CQ_LIMIT properly. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25net: thunderx: Add ethtool support for supported ports and link modes.Thanneeru Srinivasulu
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25net: thunderx: 80xx BGX0 configuration changesSunil Goutham
On 80xx only one lane of DLM0 and DLM1 (of BGX0) can be used , so even though lmac count may be 2 but LMAC1 should use serdes lane of DLM1. Since it's not possible to distinguish 80xx from 81xx as PCI devid are same, this patch adds this config support by replying on what firmware configures the lmacs with. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25phy: fix error case of phy_led_triggers_(un)registerWoojung Huh
When phy_init_hw() fails at phy_attach_direct(); - phy_detach() calls phy_led_triggers_unregister() without previous call of phy_led_triggers_register(). - still call phy_led_triggers_register() and cause memory leak. Fixes: 2e0bc452f472 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25net: ethernet: mvneta: Remove IFF_UNICAST_FLT which is not implementedAndrew Lunn
The mvneta driver advertises it supports IFF_UNICAST_FLT. However, it actually does not. The hardware probably does support it, but there is no code to configure the filter. As a quick and simple fix, remove the flag. This will cause the core to fall back to promiscuous mode. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: b50b72de2f2f ("net: mvneta: enable features before registering the driver") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25dwc_eth_qos: drop duplicate headersGeliang Tang
Drop duplicate headers types.h and delay.h from dwc_eth_qos.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25cxgb4: fix memory leak on txq_infoColin Ian King
Currently if txq_info->uldtxq cannot be allocated then txq_info->txq is being kfree'd (which is redundant because it is NULL) instead of txq_info. Fix this by instead kfree'ing txq_info. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25brcmsmac: fix array out-of-bounds access in qm_log10Tobias Regnery
I get the following UBSAN warning during boot on my laptop: ================================================================================ UBSAN: Undefined behaviour in drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_qmath.c:280:21 index 32 is out of range for type 's16 [32]' CPU: 0 PID: 879 Comm: NetworkManager Not tainted 4.9.0-rc4 #28 Hardware name: LENOVO Lenovo IdeaPad N581/INVALID, BIOS 5ECN96WW(V9.01) 03/14/2013 ffff8800b74a6478 ffffffff828e59d2 0000000041b58ab3 ffffffff8398330c ffffffff828e5920 ffff8800b74a64a0 ffff8800b74a6450 0000000000000020 1ffffffff845848c ffffed0016e94bf1 ffffffffc22c2460 000000006b9c0514 Call Trace: [<ffffffff828e59d2>] dump_stack+0xb2/0x110 [<ffffffff828e5920>] ? _atomic_dec_and_lock+0x150/0x150 [<ffffffff82968c9d>] ubsan_epilogue+0xd/0x4e [<ffffffff82969875>] __ubsan_handle_out_of_bounds+0xfa/0x13e [<ffffffff8296977b>] ? __ubsan_handle_shift_out_of_bounds+0x241/0x241 [<ffffffffc0d48379>] ? bcma_host_pci_read16+0x59/0xa0 [bcma] [<ffffffffc0d48388>] ? bcma_host_pci_read16+0x68/0xa0 [bcma] [<ffffffffc212ad78>] ? read_phy_reg+0xe8/0x180 [brcmsmac] [<ffffffffc2184714>] qm_log10+0x2e4/0x350 [brcmsmac] [<ffffffffc2142eb8>] wlc_phy_init_lcnphy+0x538/0x1f20 [brcmsmac] [<ffffffffc2142980>] ? wlc_lcnphy_periodic_cal+0x5c0/0x5c0 [brcmsmac] [<ffffffffc1ba0c93>] ? ieee80211_open+0xb3/0x110 [mac80211] [<ffffffff82f73a02>] ? sk_busy_loop+0x1e2/0x840 [<ffffffff82f7a6ce>] ? __dev_change_flags+0xae/0x220 ... The report is valid: doing the math in this function, with an input value N=63 the variable s16tableIndex gets a value of 31. This value is used as an index in the array log_table with 32 entries. But the next line is: s16errorApproximation = (s16) qm_mulu16(u16offset, (u16) (log_table[s16tableIndex + 1] - log_table[s16tableIndex])); With s16tableIndex + 1 we are trying an out-of-bounds access to the array. The log_table array provides log2 values in q.15 format and the above statement tries an error approximation with the next value. To fix this issue add the next value to the array and update the comment accordingly. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25mwifiex: Disable adhoc feature based on firmware capabilityKarthik D A
We will read fw_cap_info filled by firmware to check whether to skip ADHOC related commands or not. Also, IBSS_COALESCING_STATUS command has been moved from init path to adhoc network creation path. Signed-off-by: Karthik D A <karthida@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rtl8xxxu: Fix non static symbol warningWei Yongjun
Fixes the following sparse warning: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c:1559:6: warning: symbol 'rtl8192eu_power_off' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rtl8xxxu: Pass tx_info to fill_txdesc in order to have access to retry countJes Sorensen
In order to obtain retry count for a given rate we need to pass the full struct ieee80211_tx_info to the function setting the rate in he TX descriptor. This uncovered a huge bug where the old code would use struct ieee80211_rate.flags to test for rate parameters, which is always zero, instead of the flags value from struct ieee80211_tx_rate. Time to find a brown paper bag :( Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-14 01:08:59 +0000