summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-11-26sungem: Fix PCS_MIICTRL register write in gem_init_phy().David S. Miller
Use writel not writeb. Noticed by Hermann Lauer. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25net: hp-plus uses eip_pollRandy Dunlap
hp-plus uses 8390p.c, so it should use eip_poll(), not ei_poll(). drivers/built-in.o: In function `hpp_probe1': hp-plus.c:(.init.text+0x9cbd): undefined reference to `ei_poll' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25ne2000: convert to net_device_opsStephen Hemminger
Last driver for today. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-253c503: convert to net_device_opsStephen Hemminger
Another of the 8390p group. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25stnic: convert to net_device_opsStephen Hemminger
Can just use common ei_netdev_ops definition. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25apne: convert to net_device_opsStephen Hemminger
Yet another driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25ne2: convert to net_device_opsStephen Hemminger
Almost there. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25hp: convert to net_device_opsStephen Hemminger
Another old EISA driver converted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25lne390: convert to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25e2100: convert to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25es3210: convert to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25ne3210: convert to net_device_opsStephen Hemminger
By having common code in 8390.o don't need net_dev_ops in the driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25smc: convert to net_device_opsStephen Hemminger
Convert both eisa and mca versions of this driver, though I doubt anyone still has the hardware. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25hp-plus: convert to net_device_opsStephen Hemminger
Another driver converted to new infrastructure. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25wd: use net_device_opsStephen Hemminger
Another driver converted to net_device_ops; Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-258390: add common net_device opsStephen Hemminger
Fix the defactoring of ei_XXX functions in 8390 and 8390p. Remove the tx_timeout hack since no driver including the 3c503 overrides tx_timeout at this time, looks like a legacy thing. Also, since several drivers all have same hooks, provide common netdev_ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-253c523: fix warning in drivers/net/3c523.cIngo Molnar
fix warning: drivers/net/3c523.c:582: warning: ‘cleanup_card’ defined but not used No code changed: md5: ebe4a1b27d3f21b0b12a78c58463b0d7 3c523.o.before.asm ebe4a1b27d3f21b0b12a78c58463b0d7 3c523.o.after.asm Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25depca: fix warning in drivers/net/depca.cIngo Molnar
fix warning: drivers/net/depca.c: In function ‘depca_eisa_probe’: drivers/net/depca.c:1564: warning: ‘mem_start’ may be used uninitialized in this function this seems to be a real bug - depca_eisa_probe() does not check for failure. Add it, symmetric to depca_isa_probe(). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25atlx: fix warning in drivers/net/atlx/atl2.cIngo Molnar
fix this warning: drivers/net/atlx/atl2.c: In function ‘atl2_request_irq’: drivers/net/atlx/atl2.c:644: warning: unused variable ‘err’ 'err' is unused in the !CONFIG_PCI_MSI case. Instead of further increasing the #ifdeffery in this function, restructure the code a bit and get rid of the #ifdef. This relies on the fact that pci_enable_msi() will always fail in the !CONFIG_PCI_MSI case. There should be no change in driver behavior. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25mlx4: fix warning in drivers/net/mlx4/mcg.cIngo Molnar
fix warning: drivers/net/mlx4/mcg.c: In function ‘mlx4_multicast_attach’: drivers/net/mlx4/mcg.c:217: warning: integer overflow in expression there was no real danger of overflow here though. md5: db8eb55620f886c03854a2abb2ce6c3f mcg.o.before.asm db8eb55620f886c03854a2abb2ce6c3f mcg.o.after.asm Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25cassini: fix warning in drivers/net/cassini.cIngo Molnar
this warning: drivers/net/cassini.c: In function ‘cas_rx_ringN’: drivers/net/cassini.c:2350: warning: ‘skb’ may be used uninitialized in this function triggers because GCC does not recognize the (correct) error flow between cas_rx_process_pkt() and 'skb'. Annotate it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25mlx4: fix error path in drivers/net/mlx4/en_rx.cIngo Molnar
this warning: drivers/net/mlx4/en_rx.c: In function ‘mlx4_en_activate_rx_rings’: drivers/net/mlx4/en_rx.c:412: warning: ‘err’ may be used uninitialized in this function Triggers because 'err' is uninitialized in the following input conditions: priv->rx_ring_num is zero and mlx4_en_fill_rx_buffers() fails. But even if ->rx_ring_num is nonzero, 'err' will be zero if mlx4_en_fill_rx_buffers() fails and mlx4_en_activate_rx_rings() returns success - incorrectly. So it's best to keep the error code uptodate on mlx4_en_fill_rx_buffers() calls as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25z85230: fix warning in drivers/net/wan/z85230.cIngo Molnar
this warning: drivers/net/wan/z85230.c: In function ‘z8530_interrupt’: drivers/net/wan/z85230.c:713: warning: ‘intr’ may be used uninitialized in this function is clearly bogus - annotate it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25sis900: fix warning in drivers/net/sis900.cIngo Molnar
this warning: drivers/net/sis900.c: In function ‘sis900_timer’: drivers/net/sis900.c:1280: warning: ‘speed’ may be used uninitialized in this function triggers because GCC does not recognize the (correct) error flow between sis900_read_mode(), 'speed' and 'duplex'. Annotate it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25qla3xxx: fix warning in drivers/net/qla3xxx.cIngo Molnar
this warning: drivers/net/qla3xxx.c: In function ‘ql3xxx_probe’: drivers/net/qla3xxx.c:3912: warning: ‘pci_using_dac’ may be used uninitialized in this function triggers because GCC does not recognize the (correct) error flow between 'pci_using_dac' and 'err'. Annotate it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25niu: fix another warning in drivers/net/niu.cIngo Molnar
this warning: drivers/net/niu.c: In function ‘esr_reset’: drivers/net/niu.c:741: warning: ‘reset’ may be used uninitialized in this function triggers because GCC does not recognize the (correct) error flow between: - esr_read_reset() and 'reset' Annotate it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25niu: fix warnings in drivers/net/niu.cIngo Molnar
these warnings: drivers/net/niu.c: In function ‘serdes_init_niu_1g_serdes’: drivers/net/niu.c:451: warning: ‘sig’ may be used uninitialized in this function drivers/net/niu.c: In function ‘serdes_init_niu_10g_serdes’: drivers/net/niu.c:550: warning: ‘sig’ may be used uninitialized in this function triggers because GCC does not recognize that the max_retry loop always initializes 'sig', due to max_retry != 0. Annotate them. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25s2io: fix warning in drivers/net/s2io.cIngo Molnar
this warning: drivers/net/s2io.c: In function ‘rx_intr_handler’: drivers/net/s2io.c:7369: warning: ‘lro’ may be used uninitialized in this function triggers because GCC does not recognize the (correct) error flow between: - s2io_club_tcp_session()and 'lro' Annotate it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25ixgbe: Naming interrupt vectorsRobert Olsson
Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25niu: Naming interrupt vectors.Robert Olsson
A patch to put names on the niu interrupt vectors according the syntax below. This is needed to assign correct affinity. > So on a multiqueue card with 2 RX queues and 2 TX queues we'd > have names like: > > eth0-rx-0 > eth0-rx-1 > eth0-tx-0 > eth0-tx-1 Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Tested-by: Jesper Dangaard Brouer <jdb@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-11-25ath9k: Configure AR_PHY_SWITCH_COM with apropriate antenna controlVasanthakumar Thiagarajan
This fixes the poor wireless connection which happens even if we are very well in the range. Signed-off-by: Don.breslin@atheros.com Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25p54: honour bss_info_changed's basic_rates and other settingsChristian Lamparter
As was pointed out in "p54: honour bss_info_changed's short slot time settings", bss_info_changed provides more useful settings that can be used by the driver. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25p54pci: cache firmware for suspend/resumeChristian Lamparter
Johannes pointed out that the driver has cache the firmware for suspend/resume cycles. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25p54: minor fixesChristian Lamparter
This patch contains only contains a one-liner fixes and enhancements Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25p54: enable Mesh Point supportChristian Lamparter
This patch enables Mesh Point operation for any p54 device. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25ath9k: make DMA memory consistentLuis R. Rodriguez
Make the DMAable mameory consistent with pci_set_consistent_dma_mask(). The DMA-mapping.txt Documentation recommends this but for PCI-X considerations and on strange architecture like SGI SN2, not sure why it would fix an issue but lets see if it does, just in case. Before this, this driver was tested with x86_64 with about 7 GB of RAM, not sure if this is really needed. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25ath9k: Clarify we only want 32-bit DMALuis R. Rodriguez
Use DMA_32BIT_MASK to clarify we only want 32-bit DMA memory. What was there before is also 32-bit but this makes it clearer Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25rt2x00: Detect USB BULK in/out endpointsIvo van Doorn
Instead of hardcoding the used in/out endpoints we should detect them by walking through all available endpoints. rt2800usb will gain the most out of this, because the legacy drivers indicate that there are multiple endpoints available. However this code might benefit at least rt73usb as well for the MIMO queues, and if we are really lucky rt2500usb will benefit because for the TX and PRIO queues. Even if rt2500usb and rt73usb do not get better performance after this patch, the endpoint detection still belongs to rt2x00usb, and it shouldn't hurt to always try to detect the available endpoints. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25rtl8187: Remove module warning and dependence on CONFIG_EXPERIMENTALLarry Finger
After considerable testing, the initial fears that the driver might damage some flavors of RTL8187B hardware seem to be groundless. Accordingly, the logged warning is removed. In addition, Kconfig is changed to remove the dependence on EXPERIMENTAL. Signed-off-by: Larry Finger <Larry.Finger@lwfinger> Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25rtl8187: feedback transmitted packets using tx close descriptor for 8187BHerton Ronaldo Krzesinski
Realtek 8187B has a receive command queue to feedback beacon interrupt and transmitted packet status. Use it to feedback mac80211 about status of transmitted packets. Unfortunately in the course of testing I found that the sequence number reported by hardware includes entire sequence control in a 12 bit only field, so a workaround is done to check only lowest bits. Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25rtl8187: implement conf_tx callback to configure tx queuesHerton Ronaldo Krzesinski
Add conf_tx callback and use it to configure tx queues of 8187L/8187B. Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25rtl8187: fix 8187B throughput regressionHerton Ronaldo Krzesinski
Hin-Tak Leung reported that after the change "rtl8187: add short slot handling for 8187B" his RTL8187B started to give low throughput on network transfers. Turns out that the SIFS setting used isn't ok, it doesn't look to be the real aSIFSTime, using the "magical" 0x22 value like on other 818x variants as the vendor does too fixes the issue. Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25ath9k: Race condition in accessing TX and RX buffers.Senthil Balasubramanian
Race condition causes RX buffers to be accessed even before it is initialized. The RX and TX buffers are initialized immediately after the hardware is registered with mac80211. The mac80211 start callback is ready to be fired once the device is registered for a case when the wpa_supplicant is also running at the same time. The same race condition is also possible for RKFILL registration as RFKILL init happens after the device registration with mac80211 and it is possible that rfkill_register would be called even before it is initialized. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25ath9k: IRQ should be disabled before calling free_irq()Senthil Balasubramanian
ath9k frees irq even before IRQs are disabled and existing IRQs are flushed when rfkill_register() fails. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25ath9k: Build RFKILL feature even when RFKILL subsystem is a MODULESenthil Balasubramanian
Currently, ath9k builds RFKILL feature only when the RFKILL subsystem is built part of the kernel. Build RFKILL feature regardless of whether RFKILL subsystem is built as a MODULE or part of the kernel. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25ath9k: incorrect noise floor threshold values.Senthil Balasubramanian
This patch fixes incorrect noise floor threshold values. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25ath9k: INI update for atheros chipets.Senthil Balasubramanian
init values update for various atheros chipsets. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25iwlwifi: enable custom fw regulatory solutionLuis R. Rodriguez
This enables the custom firmware regulatory solution option on iwlwifi drivers. These devices are uncapable of mapping their EEPROM regulatory domain to a specific ISO / IEC alpha2. Although the new 11n devices (>= iwl 5000) have only 3 regultaory SKUs -- MOW, ABG (no N) and BG -- the older devices (3945 and 4965) have a more complex SKU arrangement and therefore its not practical to move this to the driver. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25iwlwifi: iwl-fh.h cleanupTomas Winkler
This patch fix value of upper FH register bound plus it reorders and groups registers in more readable way Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-16 02:41:02 +0000