summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-01-26net: dsa: Pass device pointer to dsa_register_switchFlorian Fainelli
In preparation for allowing dsa_register_switch() to be supplied with device/platform data, pass down a struct device pointer instead of a struct device_node. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-26liquidio: Avoid accessing skb after submitting to input queueSatanand Burla
Accessing skb after submitting to input queue can cause access to stale pointers if the skb ends up being transmitted and freed by that time. Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-26iwlwifi: mvm: cleanup redundant assignmentSara Sharon
This set of station id is redundant - it is being initialised above. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: use mvm_disable_queue instead of sharing logicSara Sharon
When removing inactive queue - use the central disable queue function. This is needed due to a000 changes to come, but is a proper cleanup anyway. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: mark ret as maybe_unused in iwl_dbgfs_fw_restart_write()Luca Coelho
The value returned from iwl_mvm_send_cmd_pdu() in this function is not used and always returns an error (which is the whole point of the call). Tag the ret variable with __maybe_unused to avoid this compile warning when W=1 is used: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c: In function ‘iwl_dbgfs_fw_restart_write’: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c:875:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] int ret; ^ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: dvm: remove unused variable compiler warning in debugfs.cLuca Coelho
When compiling with W=1, we get the following warning in debugfs.c: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/dvm/debugfs.c: In function ‘iwl_dbgfs_fw_restart_write’: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/dvm/debugfs.c:2313:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] int ret; ^ Fix it by ignoring the return value in this case. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: remove unused sta_id variable in iwl_mvm_change_queue_owner()Luca Coelho
Remove the sta_id variable, to avoid this compile warning when compiling with W=1: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/mvm/sta.c: In function ‘iwl_mvm_change_queue_owner’: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/mvm/sta.c:871:5: warning: variable ‘sta_id’ set but not used [-Wunused-but-set-variable] s8 sta_id; ^ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: pcie: cleanup rfkill checksSara Sharon
Move repeating code to a separate function. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: dvm: make rs_tl_get_load() return voidLuca Coelho
The return value from this function is never used, so make it return void to avoid getting the following warning when compiling wiht W=1: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/dvm/rs.c: In function ‘rs_tl_turn_on_agg_for_tid’: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/dvm/rs.c:400:6: warning: variable ‘load’ set but not used [-Wunused-but-set-variable] u32 load; ^ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: pcie: trans: Remove unused 'shift_param'Kirtika Ruchandani
shift_param is defined and set in iwl_pcie_load_cpu_sections but not used. Fix this to avoid -Wunused-but-set-variable warning. The code using it turned into dead code with commit dcab8ecd5617 ("iwlwifi: mvm: support ucode load for family_8000 B0 only") which added a separate function iwl_pcie_load_given_ucode_8000 (then 8000b) for IWL_DEVICE_FAMILY_8000. Commit 76f8c0e17edc ("iwlwifi: pcie: remove dead code") removed the dead code but left shift_param as is. iwlwifi/pcie/trans.c: In function ‘iwl_pcie_load_cpu_sections’: iwlwifi/pcie/trans.c:871:6: warning: variable ‘shift_param’ set but not used [-Wunused-but-set-variable] Fixes: dcab8ecd5617 ("iwlwifi: mvm: support ucode load for family_8000 B0 only") Fixes: 76f8c0e17edc ("iwlwifi: pcie: remove dead code") Signed-off-by: Kirtika Ruchandani <kirtika@google.com> Cc: Sara Sharon <sara.sharon@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Liad Kaufman <liad.kaufman@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [removed some unnecessary braces] Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: rs: Remove unused 'mcs' variableKirtika Ruchandani
Commit 5fc0f76c4 introduced Rx stats from debugfs, the function iwl_mvm_reset_frame_stats from that commit defines and sets mcs but does not use it. Compiling iwlwifi with W=1 gives this warning - iwlwifi/mvm/rs.c: In function ‘iwl_mvm_update_frame_stats’: iwlwifi/mvm/rs.c:3074:14: warning: variable ‘mcs’ set but not used [-Wunused-but-set-variable] Fixes: 5fc0f76c43bd (iwlwifi: mvm: add Rx frames statistics via debugfs) Signed-off-by: Kirtika Ruchandani <kirtika@google.com> Cc: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: rs: Remove unused 'mvmvif'/'mvmsta' variablesKirtika Ruchandani
mvmvif is defined and set in rs_mimo_allow but not used. Compiling iwlwifi with W=1 gives the following warning, remove it. mvmsta is used only to obtain mvmvif so remove it as well. iwlwifi/mvm/rs.c: In function 'rs_mimo_allow': iwlwifi/mvm/rs.c:165:22: warning: variable 'mvmvif' set but not used.[-Wunused-but-set-variable] This fix removes calls to iwl_mvm_sta_from_mac & iwl_mvm_vif_from_mac. They are both accessors, and do not have any side-effects. Commit e621c2282e31 ("iwlwifi: rs: Remove workaround that disables MIMO on P2P") removed a workaround that disabled MIMO on P2P, 'mvmvif' was used for that workaround, but not removed with it. Fixes: e621c2282e31 ("iwlwifi: rs: Remove workaround that disables MIMO on P2P") Signed-off-by: Kirtika Ruchandani <kirtika@google.com> Cc: Alexander Bondar <alexander.bondar@intel.com> Cc: Emmanuel Grumbach <emmmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: remove unused variable in iwl_mvm_handle_statistics()Luca Coelho
The temperature variable is set but not used in iwl_mvm_handle_statistics(). Remove it to avoid the following compiler warning when W=1 is used: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/mvm/rx.c: In function ‘iwl_mvm_handle_rx_statistics’: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/mvm/rx.c:759:6: warning: variable ‘temperature’ set but not used [-Wunused-but-set-variable] u32 temperature; ^ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: fix MODULE_FIRMWARE for 6030Jürg Billeter
IWL6000G2B_UCODE_API_MAX is not defined. ucode_api_max of IWL_DEVICE_6030 uses IWL6000G2_UCODE_API_MAX. Use this also for MODULE_FIRMWARE. Fixes: 9d9b21d1b616 ("iwlwifi: remove IWL_*_UCODE_API_OK") Signed-off-by: Jürg Billeter <j@bitron.ch> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: support version 2 of stored beacon notificationSara Sharon
For 9000 devices withg upload, FW cannot send the entire phy flags, and will send only the band - which is what we really care about anyway. Change is backward compatible. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: separate rate calculation to a new functionSara Sharon
In preparation for the new TX cmd - move the rate calculation to a diffrent function, and make it independent of the TX command. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: change iwl_mvm_tx_csum to return valueSara Sharon
Currently the function changes the TX cmd itself. Make it more generic by returning a value, as preperation to the new TX cmd. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: enlarge number of ucode sectionsSara Sharon
The maximum number of firmware sections is now 32 instead of 16 for a000 devices. Set the appropriate define. Avoid out of bounds access in case there are more sections than the maximum set by driver. Make the driver extensible to FW size changes by allocating the section memory dynamically. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: replace the number of blocks calculationSara Sharon
The logic in the paging calculations is a bit hard to follow. Replace it with a kernel define. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: simplify paging allocation codeSara Sharon
Some of the code there is duplicate while the only change is the block size. Unifying it shortens the code and make the difference clearer. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: bump max API to 28Luca Coelho
We skipped one release, so bump twice, to 28. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: properly check for transport data in dumpJohannes Berg
When copying from vmalloc'ed memory to the SG list, don't crash if the transport didn't provide any data. Fixes: 7e62a699aafb ("iwlwifi: mvm: use dev_coredumpsg()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: allow memory debug TLV to specify the memory typeJohannes Berg
Due to some new features and changes, the firmware file will now specify what type of memory to dump, in upper 8 bits of the type field of the TLV. Parse it (types we don't understand are errors) and teach the code to dump periphery memory. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-25net: phy: broadcom: drop duplicated define for RGMII SKEW delayRafał Miłecki
We had two defines for the same bit (both were used with the MII_BCM54XX_AUXCTL_SHDWSEL_MISC register). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: phy: broadcom: use auxctl reading helper in BCM54612E codeRafał Miłecki
Starting with commit 5b4e29005123 ("net: phy: broadcom: add bcm54xx_auxctl_read") we have a reading helper so use it and avoid code duplication. It also means we don't need MII_BCM54XX_AUXCTL_SHDWSEL_MISC define as it's the same as MII_BCM54XX_AUXCTL_SHDWSEL_MISC just for reading needs (same value shifted by 12 bits). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25virtio_net: reject XDP programs using header adjustmentJakub Kicinski
commit 17bedab27231 ("bpf: xdp: Allow head adjustment in XDP prog") added a new XDP helper to prepend and remove data from a frame. Make virtio_net reject programs making use of this helper until proper support is added. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25virtio_net: use dev_kfree_skb for small buffer XDP receiveJohn Fastabend
In the small buffer case during driver unload we currently use put_page instead of dev_kfree_skb. Resolve this by adding a check for virtnet mode when checking XDP queue type. Also name the function so that the code reads correctly to match the additional check. Fixes: bb91accf2733 ("virtio-net: XDP support for small buffers") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25r8152: check rx after napi is enabledhayeswang
Schedule the napi after napi_enable() for rx, if it is necessary. If the rx is completed when napi is disabled, the sheduling of napi would be lost. Then, no one handles the rx packet until next napi is scheduled. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25r8152: re-schedule napi for txhayeswang
Re-schedule napi after napi_complete() for tx, if it is necessay. In r8152_poll(), if the tx is completed after tx_bottom() and before napi_complete(), the scheduling of napi would be lost. Then, no one handles the next tx until the next napi_schedule() is called. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25r8152: avoid start_xmit to schedule napi when napi is disabledhayeswang
Stop the tx when the napi is disabled to prevent napi_schedule() is called. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25r8152: avoid start_xmit to call napi_schedule during autosuspendhayeswang
Adjust the setting of the flag of SELECTIVE_SUSPEND to prevent start_xmit() from calling napi_schedule() directly during runtime suspend. After calling napi_disable() or clearing the flag of WORK_ENABLE, scheduling the napi is useless. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25sfc: reduce severity of PIO buffer alloc failuresTomáš Pilař
PIO buffer allocation can fail for two valid reasons: - we've run out of them (results in -ENOSPC) - the NIC configuration doesn't support them (results in -EPERM) Since both these failures are expected netif_err is excessive. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: thunderx: Leave serdes lane config on 81/83xx to firmwareSunil Goutham
For DLMs and SLMs on 80/81/83xx, many lane configurations across different boards are coming up. Also kernel doesn't have any way to identify board type/info and since firmware does, just get rid of figuring out lane to serdes config and take whatever has been programmed by low level firmware. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: thunderx: Support to configure queue sizes from ethtoolSunil Goutham
Adds support to set Rx/Tx queue sizes from ethtool. Fixes an issue with retrieving queue size. Also sets SQ's CQ_LIMIT based on configured Tx queue size such that HW doesn't process SQEs when there is no sufficient space in CQ. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: phy: leds: Break dependency of phy.h on phy_led_triggers.hGeert Uytterhoeven
<linux/phy.h> includes <linux/phy_led_triggers.h>, which is not really needed. Drop the include from <linux/phy.h>, and add it to all users that didn't include it explicitly. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: phy: leds: Clear phy_num_led_triggers on failure to avoid crashGeert Uytterhoeven
phy_attach_direct() ignores errors returned by phy_led_triggers_register(). I think that's OK, as LED triggers can be considered a non-critical feature. However, this causes problems later: - phy_led_trigger_change_speed() will access the array phy_device.phy_led_triggers, which has been freed in the error path of phy_led_triggers_register(), which may lead to a crash. - phy_led_triggers_unregister() will access the same array, leading to crashes during s2ram or poweroff, like: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [<c04116d4>] (__list_del_entry_valid) from [<c05e8948>] (led_trigger_unregister+0x34/0xcc) [<c05e8948>] (led_trigger_unregister) from [<c05336c4>] (phy_led_triggers_unregister+0x28/0x34) [<c05336c4>] (phy_led_triggers_unregister) from [<c0531d44>] (phy_detach+0x30/0x74) [<c0531d44>] (phy_detach) from [<c0538bdc>] (sh_eth_close+0x64/0x9c) [<c0538bdc>] (sh_eth_close) from [<c04d4ce0>] (dpm_run_callback+0x48/0xc8) or: list_del corruption. prev->next should be dede6540, but was 2e323931 ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:52! ... [<c02f6d70>] (__list_del_entry_valid) from [<c0425168>] (led_trigger_unregister+0x34/0xcc) [<c0425168>] (led_trigger_unregister) from [<c03a05a0>] (phy_led_triggers_unregister+0x28/0x34) [<c03a05a0>] (phy_led_triggers_unregister) from [<c039ec04>] (phy_detach+0x30/0x74) [<c039ec04>] (phy_detach) from [<c03a4fc0>] (sh_eth_close+0x6c/0xa4) [<c03a4fc0>] (sh_eth_close) from [<c0483234>] (__dev_close_many+0xac/0xd0) To fix this, clear phy_device.phy_num_led_triggers in the error path of phy_led_triggers_register() fails. Note that the "No phy led trigger registered for speed" message will still be printed on link speed changes, which is a good cue that something went wrong with the LED triggers. Fixes: 2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net-next: ethernet: mediatek: change the compatible stringJohn Crispin
When the binding was defined, I was not aware that mt2701 was an earlier version of the SoC. For sake of consistency, the ethernet driver should use mt2701 inside the compat string as this is the earliest SoC with the ethernet core. The ethernet driver is currently of no real use until we finish and upstream the DSA driver. There are no users of this binding yet. It should be safe to fix this now before it is too late and we need to provide backward compatibility for the mt7623-eth compat string. Reported-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status().Michael Chan
bnxt_get_port_module_status() calls bnxt_update_link() which expects RTNL to be held. In bnxt_sp_task() that does not hold RTNL, we need to call it with a prior call to bnxt_rtnl_lock_sp() and the call needs to be moved to the end of bnxt_sp_task(). Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25bnxt_en: Fix RTNL lock usage on bnxt_update_link().Michael Chan
bnxt_update_link() is called from multiple code paths. Most callers, such as open, ethtool, already hold RTNL. Only the caller bnxt_sp_task() does not. So it is a bug to take RTNL inside bnxt_update_link(). Fix it by removing the RTNL inside bnxt_update_link(). The function now expects the caller to always hold RTNL. In bnxt_sp_task(), call bnxt_rtnl_lock_sp() before calling bnxt_update_link(). We also need to move the call to the end of bnxt_sp_task() since it will be clearing the BNXT_STATE_IN_SP_TASK bit. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25bnxt_en: Fix bnxt_reset() in the slow path task.Michael Chan
In bnxt_sp_task(), we set a bit BNXT_STATE_IN_SP_TASK so that bnxt_close() will synchronize and wait for bnxt_sp_task() to finish. Some functions in bnxt_sp_task() require us to clear BNXT_STATE_IN_SP_TASK and then acquire rtnl_lock() to prevent race conditions. There are some bugs related to this logic. This patch refactors the code to have common bnxt_rtnl_lock_sp() and bnxt_rtnl_unlock_sp() to handle the RTNL and the clearing/setting of the bit. Multiple functions will need the same logic. We also need to move bnxt_reset() to the end of bnxt_sp_task(). Functions that clear BNXT_STATE_IN_SP_TASK must be the last functions to be called in bnxt_sp_task(). The common scheme will handle the condition properly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25r8152: fix the wrong spellinghayeswang
Replace rumtime with runtime. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25bpf: add initial bpf tracepointsDaniel Borkmann
This work adds a number of tracepoints to paths that are either considered slow-path or exception-like states, where monitoring or inspecting them would be desirable. For bpf(2) syscall, tracepoints have been placed for main commands when they succeed. In XDP case, tracepoint is for exceptions, that is, f.e. on abnormal BPF program exit such as unknown or XDP_ABORTED return code, or when error occurs during XDP_TX action and the packet could not be forwarded. Both have been split into separate event headers, and can be further extended. Worst case, if they unexpectedly should get into our way in future, they can also removed [1]. Of course, these tracepoints (like any other) can be analyzed by eBPF itself, etc. Example output: # ./perf record -a -e bpf:* sleep 10 # ./perf script sock_example 6197 [005] 283.980322: bpf:bpf_map_create: map type=ARRAY ufd=4 key=4 val=8 max=256 flags=0 sock_example 6197 [005] 283.980721: bpf:bpf_prog_load: prog=a5ea8fa30ea6849c type=SOCKET_FILTER ufd=5 sock_example 6197 [005] 283.988423: bpf:bpf_prog_get_type: prog=a5ea8fa30ea6849c type=SOCKET_FILTER sock_example 6197 [005] 283.988443: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[06 00 00 00] val=[00 00 00 00 00 00 00 00] [...] sock_example 6197 [005] 288.990868: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[01 00 00 00] val=[14 00 00 00 00 00 00 00] swapper 0 [005] 289.338243: bpf:bpf_prog_put_rcu: prog=a5ea8fa30ea6849c type=SOCKET_FILTER [1] https://lwn.net/Articles/705270/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25Merge tag 'mlx5-updates-2017-01-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2017-24-01 The first seven patches from Or Gerlitz in this series further enhances the mlx5 SRIOV switchdev mode to support offloading IPv6 tunnels using the TC tunnel key set (encap) and unset (decap) actions. Or Gerlitz says: ======================== As part of doing this change, few cleanups are done in the IPv4 code, later we move to use the full tunnel key info provided to the driver as the key for our internal hashing which is used to identify cases where the same tunnel is used for encapsulating multiple flows. As done in the IPv4 case, the control path for offloading IPv6 tunnels uses route/neigh lookups and construction of the IPv6 tunnel headers on the encap path and matching on the outer hears in the decap path. The last patch of the series enlarges the HW FDB size for the switchdev mode, so it has now room to contain offloaded flows as many as min(max number of HW flow counters supported, max HW table size supported). ======================== Next to Or's series you can find several patches handling several topics. From Mohamad, add support for SRIOV VF min rate guarantee by using the TSAR BW share weights mechanism. From Or, Two patches to enable Eth VFs to query their min-inline value for user-space. for that we move a mlx5 low level min inline helper function from mlx5 ethernet driver into the core driver and then use it in mlx5_ib to expose the inline mode to rdma applications through libmlx5. From Kamal Heib, Reduce memory consumption on kdump kernel. From Shaker Daibes, code reuse in CQE compression control logic ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24netvsc: call netif_receive_skbstephen hemminger
To improve performance, netvsc can call network stack directly and avoid the local backlog queue. This is safe since incoming packets are handled in softirq context already because the receive function callback is called from a tasklet. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24netvsc: simplify get next send sectionstephen hemminger
Use kernel for_each_clear_bit macro to simplify finding next available send section. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24netvsc: report per-channel stats in ethtool statisticsSimon Xiao
Report packets and bytes transferred through a vmbus channel via ethtool. This supersedes need for per-cpu statistics. Example: $ ethtool -S eth0 NIC statistics: ... tx_queue_0_packets: 3523179 tx_queue_0_bytes: 505370920 rx_queue_0_packets: 41430490 rx_queue_0_bytes: 62714661254 tx_queue_1_packets: 0 tx_queue_1_bytes: 0 rx_queue_1_packets: 0 rx_queue_1_bytes: 0 ... Reviewed-by: Long Li <longli@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Simon Xiao <sixiao@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24netvsc: account for packets/bytes transmitted after completionstephen hemminger
Most drivers do not increment transmit statistics until after the transmit is completed. This will also be necessary for BQL support. Slight additional complexity because the netvsc driver aggregates multiple packets into one transmit. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24netvsc: eliminate per-device outstanding send counterstephen hemminger
Since now keep track of per-queue outstanding sends, we can avoid one atomic update by removing no longer needed per-device atomic. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24netvsc: simplify rndis_filter_removestephen hemminger
All caller's already have pointer to netvsc_device so pass it. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24netvsc: don't pass void * to internal device_addstephen hemminger
All the caller's/callee's know that the format of the device_add parameter is a netvsc_device_info struct. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-01 01:01:02 +0000