summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-07-21mt76: mt7615: add .set_tsf callbackRyder Lee
It is useful for IBSS Mesh to adjust t_clockdrift. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: add U-APSD support on AP sideLorenzo Bianconi
Introduce U-APSD support in mt76 driver for AP interface Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: rely on register macrosLorenzo Bianconi
For consistency with the rest of the code always rely on defined macros for register access Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: fix include in pci.hMarkus Theil
kernel test robot <lkp@intel.com> found the following issue and Kalle Valo forwarded it to Linux wireless. drivers/net/wireless/mediatek/mt76/pci.c:8:6: warning: no previous prototype for 'mt76_pci_disable_aspm' Fix this by adding the missing include of mt76.h as Kalle suggested. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: allow more channels, allowed in ETSI domainMarkus Theil
While looking at the ETSI regulatory domain definitions and a patch, which allows more channels for ath10k, I also checked the channels allowed for mt76. ETSI regulations would possibly allow to add channels 32, 68, 96, 144, 169 and 173. IEEE 802.11-2016 defines no operating class for channels 32, 68 and 96. This leaves us channels 144, 169 and 173, which are included in this patch. I tested 169 and 173 with a mt76 based USB dongle (AVM AC 860) and they worked fine. If I saw that right, these channels are also covered by register definitions inside the driver. Channel 144 should also work, but gets disabled by the kernel as of now. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: fix up typo in Kconfig for MT7663USean Wang
Fix up typo in Kconfig with indicating MT7663U is an 802.11ac device Fixes: eb99cc95c3b6 ("mt76: mt7615: introduce mt7663u support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7663: introduce ARP filter offloadSean Wang
Introduce ARP filter offload Co-developed-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Signed-off-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: usb: rely on mt76_for_each_q_rxLorenzo Bianconi
Rely on mt76_for_each_q_rx whenever possible in order to simply the code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: re-enable offloading of sequence number assignmentFelix Fietkau
Preparation for supporting more offload features Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: overwrite qid for non-bufferable mgmt framesLorenzo Bianconi
Overwrite hw queue id for non-bufferable management frames if the hw support always txq (altxq) in order to be in sync with mac txwi code Fixes: cdad4874057d ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Suggested-by: Felix Fietkau <nbd@nbd.name> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: fix hw queue mappingLorenzo Bianconi
mt7622/mt7663 chipsets rely on a fixed reverse queue map order respect to mac80211 one: - q(0): IEEE80211_AC_BK - q(1): IEEE80211_AC_BE - q(2): IEEE80211_AC_VI - q(3): IEEE80211_AC_VO Fixes: cdad4874057d ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: fix lmac queue debugsfs entryLorenzo Bianconi
acs and wmm index are swapped in mt7615_queues_acq respect to the hw design Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: add missing lock configuring coverage classLorenzo Bianconi
Coverage class callback can potentially run in parallel with other routines (e.g. mt7615_set_channel) that configures timing registers. Run coverage class callback holding mt76 mutex Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21Merge tag 'thunderbolt-for-v5.9' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.9 merge window This includes following Thunderbolt/USB4 changes for v5.9 merge window: * Improvements around NHI (Native Host Interface) HopID allocation * Improvements to tunneling and USB3 bandwidth management support * Add KUnit tests for path walking and tunneling * Initial support for USB4 retimer firmware upgrade * Implement Thunderbolt device firmware upgrade mechanism that runs the NVM image authentication when the device is disconnected. * A couple of small non-critical fixes * tag 'thunderbolt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (32 commits) thunderbolt: Fix old style declaration warning thunderbolt: Add support for authenticate on disconnect thunderbolt: Add support for separating the flush to SPI and authenticate thunderbolt: Ensure left shift of 512 does not overflow a 32 bit int thunderbolt: Add support for on-board retimers thunderbolt: Implement USB4 port sideband operations for retimer access thunderbolt: Retry USB4 block read operation thunderbolt: Generalize usb4_switch_do_[read|write]_data() thunderbolt: Split common NVM functionality into a separate file thunderbolt: Add Intel USB-IF ID to the NVM upgrade supported list thunderbolt: Add KUnit tests for tunneling thunderbolt: Add USB3 bandwidth management thunderbolt: Make tb_port_get_link_speed() available to other files thunderbolt: Implement USB3 bandwidth negotiation routines thunderbolt: Increase DP DPRX wait timeout thunderbolt: Report consumed bandwidth in both directions thunderbolt: Make usb4_switch_map_pcie_down() also return enabled ports thunderbolt: Make usb4_switch_map_usb3_down() also return enabled ports thunderbolt: Do not tunnel USB3 if link is not USB4 thunderbolt: Add DP IN resources for all routers ...
2020-07-21ieee802154: fix one possible memleak in ca8210_dev_com_initLiu Jian
We should call destroy_workqueue to destroy mlme_workqueue in error branch. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Liu Jian <liujian56@huawei.com> Link: https://lore.kernel.org/r/20200720143315.40523-1-liujian56@huawei.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2020-07-20net: neterion: vxge: reduce stack usage in VXGE_COMPLETE_VPATH_TXBixuan Cui
Fix the warning: [-Werror=-Wframe-larger-than=] drivers/net/ethernet/neterion/vxge/vxge-main.c: In function'VXGE_COMPLETE_VPATH_TX.isra.37': drivers/net/ethernet/neterion/vxge/vxge-main.c:119:1: warning: the frame size of 1056 bytes is larger than 1024 bytes Dropping the NR_SKB_COMPLETED to 16 is appropriate that won't have much impact on performance and functionality. Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: ag71xx: add missed clk_disable_unprepare in error path of probeHuang Guobin
The ag71xx_mdio_probe() forgets to call clk_disable_unprepare() when of_reset_control_get_exclusive() failed. Add the missed call to fix it. Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: dsa: qca8k: implement the port MTU callbacksJonathan McDowell
This switch has a single max frame size configuration register, so we track the requested MTU for each port and apply the largest. v2: - Address review feedback from Vladimir Oltean Signed-off-by: Jonathan McDowell <noodles@earth.li> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net/fealnx: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated, GFP_KERNEL can be used because it is called from the probe function (i.e. 'fealnx_init_one()') and no lock is taken. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20ionic: use mutex to protect queue operationsShannon Nelson
The ionic_wait_on_bit_lock() was a open-coded mutex knock-off used only for protecting the queue reset operations, and there was no reason not to use the real thing. We can use the lock more correctly and to better protect the queue stop and start operations from cross threading. We can also remove a useless and expensive bit operation from the Rx path. This fixes a case found where the link_status_check from a link flap could run into an MTU change and cause a crash. Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20ionic: keep rss hash after fw updateShannon Nelson
Make sure the RSS hash key is kept across a fw update by not de-initing it when an update is happening. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20ionic: update filter id after replayShannon Nelson
When we replay the rx filters after a fw-upgrade we get new filter_id values from the FW, which we need to save and update in our local filter list. This allows us to delete the filters with the correct filter_id when we're done. Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20ionic: fix up filter locks and debug msgsShannon Nelson
Add in a couple of forgotten spinlocks and fix up some of the debug messages around filter management. Fixes: c1e329ebec8d ("ionic: Add management of rx filters") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20ionic: use offset for ethtool regs dataShannon Nelson
Use an offset to write the second half of the regs data into the second half of the buffer instead of overwriting the first half. Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: add hwmon getter for MAC temperatureMark Starovoytov
This patch adds the possibility to obtain MAC temperature via hwmon. On A1 there are two separate temperature sensors. On A2 there's only one temperature sensor, which is used for reporting both MAC and PHY temperature. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: A0 ntuple filtersDmitry Bogdanov
This patch adds support for ntuple filters on A0. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: use intermediate variable to improve readability a bitNikita Danilov
This patch syncs up hw_atl_a0.c with an out-of-tree driver, where an intermediate variable was introduced in a couple of functions to improve the code readability a bit. Signed-off-by: Nikita Danilov <ndanilov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: use U32_MAX in aq_hw_utils.cMark Starovoytov
This patch replaces magic constant ~0U usage with U32_MAX in aq_hw_utils.c Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: add support for 64-bit reads/writesPavel Belous
This patch adds support for 64-bit reads/writes where applicable, e.g. A2 supports them. Signed-off-by: Pavel Belous <pbelous@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: enable ipv6 support for TCP LSO and UDP GSOIgor Russkikh
This patch enables ipv6 support for TCP LSO and UDP GSO. The code itself (aq_nic_map_skb) was ready for this after udp gso feature, but corresponding NETIF_F_TSO6 wasn't enabled. We now have tested both tcp and udp v6 GSO, and enabling them safely. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: PTP statisticsPavel Belous
This patch adds PTP rings statistics. Before that these were missing from overall stats, hardening debugging and analysis. Signed-off-by: Pavel Belous <pbelous@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: additional per-queue statsDmitry Bogdanov
This patch adds additional per-queue stats, these could be useful for debugging and diagnostics. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: use u64_stats_update_* to protect access to 64-bit statsMark Starovoytov
This patch adds u64_stats_update_* usage to protect access to 64-bit stats, where necessary. This is necessary for per-ring stats, because they are updated by the driver directly, so there is a possibility for a partial read. Other stats require no additional protection, e.g.: * all MACSec stats are fetched directly from HW (under semaphore); * nic/ndev stats (aq_stats_s) are fetched directly from FW (under mutex). Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: split rx and tx per-queue statsMark Starovoytov
This patch splits rx and tx per-queue stats. This change simplifies the follow-up introduction of PTP stats and u64_stats_update_* usage. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: make _get_sw_stats return count as return valueMark Starovoytov
This patch changes aq_vec_get_sw_stats() to return count as a return value (which was unused) instead of an out parameter. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: use simple assignment in _get_stats and _get_sw_statsMark Starovoytov
This patch replaces addition assignment operator with a simple assignment in aq_vec_get_stats() and aq_vec_get_sw_stats(), because it is sufficient in both cases and this change simplifies the introduction of u64_stats_update_* in these functions. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: move FRAC_PER_NS to aq_hw.hMark Starovoytov
This patch moves FRAC_PER_NS to aq_hw.h so that it can be used in both hw_atl (A1) and hw_atl2 (A2) in the future. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20ethernet: myri10ge: use generic power managementVaibhav Gupta
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. This driver makes use of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), pci_set_power_state() and pci_set_master() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Use to_pci_dev() and dev_get_drvdata() to get "struct pci_dev*" variable and drv data. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: add support for the extended speed and FEC modesAlexander Lobakin
Add all necessary code (NVM parsing, MFW and Ethtool reports etc.) to support extended speed and FEC modes. These new modes are supported by the new boards revisions and newer MFW versions. Misc: correct port type for MEDIA_KR. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: populate supported link modes maps on module initAlexander Lobakin
Simplify and lighten qed_set_link() by declaring static link modes maps and populating them on module init. This way we save plenty of text size at the low expense of __ro_after_init and __initconst data (the latter will be purged after module init is done). Misc: sanitize exit callback. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: add missing loopback modesAlexander Lobakin
These modes are relevant only for several boards, but may be reported by MFW as well as the others. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: add support for new port modesAlexander Lobakin
These ports ship on new boards revisions and are supported by newer firmware versions. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: remove unused qed_hw_info::port_mode and QED_PORT_MODEAlexander Lobakin
Struct field qed_hw_info::port_mode isn't used anywhere in the code, so can be safely removed to prevent possible dead code addition. Also remove the enumeration QED_PORT_MODE orphaned after this deletion. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: reformat several structures a bitAlexander Lobakin
Reformat a few nvm_cfg* structures (and partly qed_dev) prior to adding new fields and definitions. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qede: introduce support for FEC controlAlexander Lobakin
Add Ethtool callbacks for querying and setting FEC parameters if it's supported by the underlying qed module and MFW version running on the device. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qede: format qede{,_vf}_ethtool_opsAlexander Lobakin
Prior to adding new callbacks, format qede ethtool_ops structs to make declarations more fancy and readable. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: add support for Forward Error CorrectionAlexander Lobakin
Add all necessary routines for reading supported FEC modes from NVM and querying FEC control to the MFW (if the running version supports it). Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: reformat several structures a bitAlexander Lobakin
Prior to adding new fields and bitfields, reformat the related structures according to the Linux style (spaces to tabs, lowercase hex, indentation etc.). Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: use transceiver data to fill link partner's advertising speedsAlexander Lobakin
Currently qed driver does not take into consideration transceiver's capabilities when generating link partner's speed advertisement. This leads to e.g. incorrect ethtool link info on 10GbaseT modules. Use transceiver info not only for advertisement and support arrays, but also for link partner's abilities to fix it. Misc: fix a couple of comments nearby. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: add support for multi-rate transceiversAlexander Lobakin
Set the corresponding advertised and supported link modes according to the detected transceiver type and device capabilities. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 09:54:23 +0000