summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-04-08nfp: convert .ndo_change_mtu() to prepare/commit paradigmJakub Kicinski
When changing MTU on running device first allocate new rings and buffers and once it succeeds proceed with changing MTU. Allocation of new rings is not really necessary for this operation - it's done to keep the code simple and because size of the extra ring memory is quite small compared to the size of buffers. Operation can still fail midway through if FW communication times out. In that case we retry with old MTU (rings). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: propagate list buffer size in struct rx_ringJakub Kicinski
Free list buffer size needs to be propagated to few functions as a parameter and added to struct nfp_net_rx_ring since soon some of the functions will be reused to manage rings with buffers of size different than nn->fl_bufsz. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: sync ring state during FW reconfigurationJakub Kicinski
FW reconfiguration in .ndo_open()/.ndo_stop() should reset/ restore queue state. Since we need IRQs to be disabled when filling rings on RX path we have to move disable_irq() from .ndo_open() all the way up to IRQ allocation. nfp_net_start_vec() becomes trivial now so it's inlined. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: slice .ndo_open() and .ndo_stop() upJakub Kicinski
Divide .ndo_open() and .ndo_stop() into logical, callable chunks. No functional changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: move filling ring information to FW configJakub Kicinski
nfp_net_[rt]x_ring_{alloc,free} should only allocate or free ring resources without touching the device. Move setting parameters in the BAR to separate functions. This will make it possible to reuse alloc/free functions to allocate new rings while the device is running. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: preallocate RX buffers early in .ndo_openJakub Kicinski
We want the .ndo_open() to have following structure: - allocate resources; - configure HW/FW; - enable the device from stack perspective. Therefore filling RX rings needs to be moved to the beginning of .ndo_open(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: reorganize initial filling of RX ringsJakub Kicinski
Separate allocation of buffers from giving them to FW, thanks to this it will be possible to move allocation earlier on .ndo_open() path and reuse buffers during runtime reconfiguration. Similar to TX side clean up the spill of functionality from flush to freeing the ring. Unlike on TX side, RX ring reset does not free buffers from the ring. Ring reset means only that FW pointers are zeroed and buffers on the ring must be placed in [0, cnt - 1) positions. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: cleanup tx ring flush and rename to resetJakub Kicinski
Since we never used flush without freeing the ring later the functionality of the two operations is mixed. Rename flush to ring reset and move there all the things which have to be done after FW ring state is cleared. While at it do some clean-ups. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: allocate ring SW structs dynamicallyJakub Kicinski
To be able to switch rings more easily on config changes allocate them dynamically, separately from nfp_net structure. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: make *x_ring_init do all the initJakub Kicinski
nfp_net_[rt]x_ring_init functions used to be called from probe path only and some of their functionality was spilled to the call site. In order to reuse them for ring reconfiguration we need them to do all the init. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: break up nfp_net_{alloc|free}_ringsJakub Kicinski
nfp_net_{alloc|free}_rings contained strange mix of allocations and vector initialization. Remove it, declare vector init as a separate function and handle allocations explicitly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: move link state interrupt request/free callsJakub Kicinski
We need to be able to disable the link state interrupt when the device is brought down. We used to just free the IRQ at the beginning of .ndo_stop(). As we now move towards more ordered .ndo_open()/.ndo_stop() paths LSC allocation should be placed in the "allocate resource" section. Since the IRQ can't be freed early in .ndo_stop(), it is disabled instead. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08nfp: correct RX buffer length calculationJakub Kicinski
When calculating the RX buffer length we need to account for up to 2 VLAN tags. Rounding up to 1k is an relic of a distant past and can be removed. While at it also remove trivial print statement. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08ieee802154/adf7242: fix memory leak of firmwareSudip Mukherjee
If the firmware upload or the firmware verification fails then we printed the error message and exited but we missed releasing the firmware. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-07ixgbe: Bump version numberMark Rustad
Update ixgbe version number. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Add KR backplane support for x550em_aMark Rustad
Add support for x550em_a-based KR backplane devices. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Add support for SGMII backplane interfaceMark Rustad
Add support for an SGMII backplane interface. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Add support for SFPs with retimerMark Rustad
Add support for SFPs with an external retimer. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Introduce function to control MDIO speedMark Rustad
Move code that controls MDIO speed into a new function because there will be more MACs that need the control. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Read and parse NW_MNG_IF_SEL registerMark Rustad
Read the IXGBE_NW_MNG_IF_SEL register and use it to set interface attributes. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Read and set instance idMark Rustad
Read the instance number from EEPROM and save it for later use. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Use new methods for PHY accessMark Rustad
Now x550em_a devices will use a new method for PHY access that will get the firmware token for each access. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Add support for x550em_a 10G MAC typeMark Rustad
Add support for x550em_a 10G MAC type to the ixgbe driver. The new MAC includes new firmware commands that need to be used to control PHY and IOSF access, so that support is also added. The interface supported is a native SFP+ interface. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Use method pointer to access IOSF devicesMark Rustad
Provide method pointers and use them to access IOSF-attached devices. A new MAC will introduce a new access method. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Add definitions for x550em_a 10G MACMark Rustad
Add definitions for a x550em_a 10G MAC device with a native SFP interface. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Add support for single-port X550 deviceMark Rustad
Add support for a single-port X550 device. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe/ixgbevf: Add support for bulk free in Tx cleanup & cleanup boolean logicAlexander Duyck
This patch enables bulk free in Tx cleanup for ixgbevf and cleans up the boolean logic in the polling routines for ixgbe and ixgbevf in the hopes of avoiding any mix-ups similar to what occurred with i40e and i40evf. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Take manageability semaphore for firmware commandsMark Rustad
We need to take the manageability semaphore when issuing firmware commands to avoid problems. With this in place, the semaphore is no longer taken in the ixgbe_set_fw_drv_ver_generic function, since it will now always be taken by the ixgbe_host_interface_command function. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Clean up interface for firmware commandsMark Rustad
Clean up the interface for issuing firmware commands to use a void * instead of a u32 *. This eliminates a number of casts. Also clean up ixgbe_host_interface_command in a few other ways, eliminating comparisons with 0, redundant parens and minor formatting issues. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Correct length check for round upMark Rustad
The function ixgbe_host_interface_command actually uses a multiple of word sized buffer to do its business, but only checks against the actual length passed in. This means that on read operations it could be possible to modify locations beyond the length passed in. Change the check to round up in the same way, just to avoid any possible hazard. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Change the lan_id and func fields to a u8 to avoid castsMark Rustad
Since the lan_id and func fields only ever hold small values, make them u8 to avoid casts used to silence warnings. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Delete some unused register definitionsMark Rustad
I noticed the SRAMREL registers are not referenced for any device, so delete the definitions. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07geneve: change to use UDP socket GROTom Herbert
Adapt geneve_gro_receive, geneve_gro_complete to take a socket argument. Set these functions in tunnel_config. Don't set udp_offloads any more. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07vxlan: change vxlan to use UDP socket GROTom Herbert
Adapt vxlan_gro_receive, vxlan_gro_complete to take a socket argument. Set these functions in tunnel_config. Don't set udp_offloads any more. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07tun: use socket locks for sk_{attach,detatch}_filterHannes Frederic Sowa
This reverts commit 5a5abb1fa3b05dd ("tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter") and replaces it to use lock_sock around sk_{attach,detach}_filter. The checks inside filter.c are updated with lockdep_sock_is_held to check for proper socket locks. It keeps the code cleaner by ensuring that only one lock governs the socket filter instead of two independent locks. Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07Merge ath-next from ath.gitKalle Valo
ath.git patches for 4.7. Major changes: ath10k * implement push-pull tx model using mac80211 software queuing support * enable scan in AP mode (NL80211_FEATURE_AP_SCAN) wil6210 * add basic PBSS (Personal Basic Service Set) support * add initial P2P support * add oob_mode module parameter
2016-04-07mwifiex: dump pcie scratch registersXinming Hu
This patch prints pcie scratch registers during firmware dump. They will be useful for analysing firmware status. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: AMSDU Rx frame handling in AP modeXinming Hu
This patch processes sub AMSDU frame received in AP mode. If a packet is multicast/broadcast, it is sent to kernel/upper layer as well as queued back to AP TX queue so that it can be sent to other associated stations. If a packet is unicast and RA is present in associated station list, it is again requeued into AP TX queue. If a packet is unicast and RA is not in associated station list, packet is forwarded to kernel to handle routing logic. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: schedule main workqueue for transmitting bridge packetsXinming Hu
Bridge packets are enqueued to wmm tx queue, but will not be sent until main workqeue is scheduled for new interrupt or other reason. This adds unnecessary delay during traffic. We will schedule main workqueue when bridge packet is queued. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: remove redundant GFP_DMA flagXinming Hu
skb forwarded to TCP/IP stack doesn't need to allocate in DMA ZONE. This patch removes GFP_DMA flag in this case to save precious DMA memory. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: check revision id while choosing PCIe firmwareShengzhen Li
Some of the chipsets have two revisions. This patch selects appropriate firmware by checking revision id. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: add support for wakeup on GTK rekey failureGanapathi Bhat
User can configure wakeup on GTK rekey fail with wowlan. Added corresponding wakeup reason. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: add support for GTK rekey offloadGanapathi Bhat
Added driver functionality to offload GTK rekey to firmware. When AP sends new GTK, firmware will update it. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Do not set LDOA15 / LDOV12 on 8192euJes Sorensen
Per the vendor driver, it looks like the 8192eu doesn't have LDOA15 / LDOV12 registers. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Use correct H2C calls for 8192euJes Sorensen
The 8192eu uses the same H2C API as the 8723bu. Call the correct functions for update_rate_mask() and report_connect(). Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Identify 8192eu rev A/B parts correctlyJes Sorensen
8192eu A/B cut parts were incorrectly identified as 8192cu devices. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Use enums for chip version numbersJes Sorensen
With support for more chips being added, use an enum to specify the chip version. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Update some register definitionsJes Sorensen
Improve descriptive names of some registers and add some additional registers only found on nextgen chips. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: 8192eu uses txdesc40Jes Sorensen
8192eu uses the new TX descriptor format Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: TXDESC_SHORT_GI is txdesc32 onlyJes Sorensen
This is no short GI bit in the txdesc40 format. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-15 02:39:47 +0000