summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-04-26qed: Add PF max bandwidth configuration supportManish Chopra
This patch adds support for PF maximum bandwidth update or configuration notified by management firmware. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26qed: Add vport WFQ configuration APIsManish Chopra
This patch adds relevant APIs needed to configure WFQ (Weighted fair queueing) values for the vports. WFQ configuration is used per vport basis when minimum bandwidth update/configuration is notified to the PF by the management firmware. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26cxgb4: Decode link down reason code obtained from firmwareHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26cxgb4: Don't assume FW_PORT_CMD reply is always port info msgHariprasad Shenai
The firmware can send a set of asynchronous replies through FW_PORT_CMD with DCBX information when that's negotiated with the Link Peer. The old code always assumed that a FW_PORT_CMD reply was always a Get Port Information message. This change conditionalizes the code to only handle the Get Port Information messages and throws a warning if we don't understand what we've been given. Also refactor t4_handle_fw_rpl() so that core functionality performed by t4_handle_get_port_info() for a specified port. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26cxgb4: DCB message handler needs to use correct portid to netdev mappingHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26cxgb4: Refactor t4_port_init functionHariprasad Shenai
Refactor t4_port_init() so that the core functionality is done by t4_init_portinfo() for a particular port. Also rename variables to sensible ones. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26cxgb4: Properly decode port module typeHariprasad Shenai
Decode and log port module error, unknown modules and unsupported modules. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26cxgb4: Avoids race and deadlock while freeing tx descriptorHariprasad Shenai
There could be race between t4_eth_xmit() and t4_free_sge_resources() while freeing tx descriptors, take txq lock in t4_free_sge_resources(). We need to stop the xmit frame path which runs in bottom half context while unloading the driver using _bh variant of the lock. This is to prevent the deadlock between xmit and driver unload. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26cxgb4: Add llseek operation for flash debugfs entryHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26cxgb4: add new routine to get adapter infoHariprasad Shenai
Add new routine to print out general adapter information (various version numbers, adapter name, part number, serial number, etc.) and remove redundant information dumped in the Port Information. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-04-26 Here's another set of Bluetooth & 802.15.4 patches for the 4.7 kernel: - Cleanups & refactoring of ieee802154 & 6lowpan code - Security related additions to ieee802154 and mrf24j40 driver - Memory corruption fix to Bluetooth 6lowpan code - Race condition fix in vhci driver - Enhancements to the atusb 802.15.4 driver Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26i40evf: Allow PF driver to configure RSSMitch Williams
If the PF driver reports proper support, allow the PF driver to configure RSS on the behalf of the VF driver. This will allow for RSS support on future hardware without changes to the VF driver. Unfortunately, the old RSS code still needs to stay as the driver needs to be compatible with PF drivers that don't support this interface. But this change still simplifies the data structures a bunch and makes this code simpler to read and maintain. Change-ID: I0375aad40788ecdc0cb24d5cfeccf07804e69771 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40e: Specify AQ event opcode to wait forShannon Nelson
To add a little flexibility to the nvmupdate facility, this code adds the ability to specify an AQ event opcode to wait on after the Exec_AQ request. Change-ID: Iddbfd63c3de8df3edb9d3e90678b08989bc4946e Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26drivers/wireless: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26macsec: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26wil6210: prevent deep sleep of 60G device in critical pathsMaya Erez
In idle times 60G device can enter deep sleep and turn off its XTAL clock. Host access triggers the device power-up flow which will hold the AHB during XTAL stabilization until device switches from slow-clock to XTAL clock. This behavior can stall the PCIe bus for some arbitrary period of time. In order to prevent this stall, host can vote for High Latency Access Policy (HALP) before reading from PCIe bus. This vote will wakeup the device from deep sleep and prevent deep sleep until unvote is done. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: unmask RX_HTRSH interrupt only when connectedMaya Erez
RX_HTRSH interrupt sometimes triggered during device reset procedure. To prevent handling this interrupt when not required, unmask this interrupt only if we are connected and mask it when disconnected. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: print debug message when transmitting while disconnectedMaya Erez
Network stack can try to transmit data while AP / STA is disconnected. Change this print-out to debug level as this should not be handled as error. This patch also adds wil_dbg_ratelimited, used to limit the above print-out. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: change RX_HTRSH interrupt print level to debugMaya Erez
When using interrupt moderation RX_HTRSH interrupt can occur frequently during high throughput and should not be considered as error. Such print-outs can degrade the performance hence should be printed in debug print level. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: support regular scan on P2P_DEVICE interfaceLior David
P2P search can only run on the social channel (channel 2). When issuing a scan request on the P2P_DEVICE interface, driver ignored the channels argument and always performed a P2P search. Fix this by checking the channels argument, if it is not specified (meaning full scan) or if a non-social channel was specified, perform a regular scan and not a P2P search. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: add function name to wil log macrosMaya Erez
Add __func__ to wil_err and wil_info for easier debugging. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26ath6kl: add ability to set debug uart baud rateSteve deRosier
It's useful to permit the customization of the debug uart baud rate. Enable this and send down the value to the chip if we're enabling debug. Signed-off-by: Steve deRosier <steve.derosier@lairdtech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26ath6kl: fix missing uart debug pin for 6004 HW 3.0Steve deRosier
For some reason, the 6004 HW 3.0 definition was missing the value for the uarttx_pin (used for firmware debug). This corrects this situation. Signed-off-by: Steve deRosier <steve.derosier@lairdtech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26ath10k: fix a typo in ath10k_start()Mohammed Shafi Shajakhan
fix a typo (spelling mistake) in 'ath10k_start' Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26ath10k: add max_tx_power for QCA6174 WLAN.RM.2.0 firmwareAlan Liu
QCA6174 WLAN.RM.2.0 firmware uses max_tx_power instead of using max_reg_power to set transmission power. The tx power was about -50dbm, after applying this change, it become -32dbm. Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26Merge ath-next from ath.gitKalle Valo
ath.git patches for 4.7. Major changes: ath10k * implement set_tsf() for 10.2.4 branch * remove rare MSI range support * remove deprecated firmware API 1 support ath9k * add module parameter to invert LED polarity wcn36xx * fixes to get the driver properly working on Dragonboard 410c
2016-04-26i40e: Code cleanup in i40e_add_fdir_ethtoolShannon Nelson
A little bit of code cleanup in prep for more cloud filter work. Change-ID: I0dc33ce0d4c207944336a07437640fef920c100c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40evf: Don't PanicMitch Williams
Under some circumstances the driver remove function may be called before the driver is fully initialized. So we can't assume that we know where our towel is at, or that all of the data structures are initialized. To ensure that we don't panic, check that the vsi_res pointer is valid before dereferencing it. Then drink beer and eat peanuts. Change-ID: If697b4db57348e39f9538793e16aa755e3e1af03 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40e: Add support for configuring VF RSSMitch Williams
Add support for configuring RSS on behalf of the VFs. This removes the burden of dealing with different hardware interfaces from the VF drivers, allowing for better future compatibility. Change-ID: Icea75d3f37241ee8e447be5779e5abb53ddf04c0 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40e/i40evf: Add support for IPIP and SIT offloadsAlexander Duyck
Looking over the documentation it turns out enabling IPIP and SIT offloads for i40e is pretty straightforward. As such I decided to enable them with this patch. In my testing I am seeing an improvement of 8 to 10 Gb/s for IPIP and SIT tunnels with this offload enabled. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40e/i40evf: Clean up feature flagsAlexander Duyck
The feature flags list for i40e and i40evf is beginning to become pretty massive. I plan to add another 4 or so features to these drivers and duplicating the flags for each and every flags list is becoming a bit repetitive. The primary change here is that we now build our features list around hw_encap_features. After that we assign that to vlan_features, hw_features, and finally map that onto features. In addition we end up throwing features onto hw_encap_features that end up having no effect such as the Rx offloads and SCTP_CRC. However that should have no impact and makes things a bit easier for us as hw_encap_features is one of the less updated features maps available. For i40evf I went through and sanity checked a few features as well. Specifically RXCSUM was being set as a read-only feature which didn't make much sense. I have updated things so we can clear the NETIF_F_RXCSUM flag since that is really a software feature and not a hardware one anyway so disabling it is just a matter of ignoring the result from the hardware. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26iwlwifi: fix fw version reading for DVM devicesLuca Coelho
In commit 97f95c93c8ed ("iwlwifi: remove support for fw older than -16.ucode") we accidentally changed the fw version reading code for DVM devices. The code intended to remove the old fw version API, because all MVM firmwares version 16 and above that we support don't use it anymore. But DVM devices still use the old FW API. Fix that by bringing the code back in. Reported-by: Pat Erley <pat-lkml@erley.org> Tested-by: Kalle Valo <kvalo@codeaurora.org> Fixes: 97f95c93c8ed ("iwlwifi: remove support for fw older than-16.ucode") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rt2800lib: enable MFP if hw crypt is disabledChun-Yeow Yeoh
If rt2800usb is loaded with nohwcrypt=1, mac80211 takes care of the crypto with software encryption/decryption and thus, MFP can be used. Tested for secured mesh using ath9k_htc and ath9k. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26brcmfmac: testing the wrong variable in brcmf_rx_hdrpull()Dan Carpenter
Smatch complains about this code: drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c:335 brcmf_rx_hdrpull() error: we previously assumed '*ifp' could be null (see line 333) The problem is that we recently changed these from "ifp" to "*ifp" but there was one that we didn't update. - if (ret || !ifp || !ifp->ndev) { + if (ret || !(*ifp) || !(*ifp)->ndev) { if (ret != -ENODATA && ifp) ^^^ - ifp->stats.rx_errors++; + (*ifp)->stats.rx_errors++; I have updated it to *ifp as well. We always call this function is a non-NULL "ifp" pointer, btw. Fixes: c462ebcdfe42 ('brcmfmac: create common function for handling brcmf_proto_hdrpull()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26mwifiex: fix loop timeout in mwifiex_prog_fw_w_helper()Dan Carpenter
USB8XXX_FW_MAX_RETRY is 3. We were using a post-op loop "while (retries--) {" but then the lines after that assume the loop exits with retries set to zero. I've fixed this by changing to a pre-op loop. I started with retries set to 4 instead of 3 so that we still go through the loop the same number of times. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26mwifiex: missing error code on allocation failureDan Carpenter
We accidentally return success instead of -ENOMEM. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_iqk_phy_iq_bb_regJes Sorensen
There is nothing 8723au specific about rtl8723au_iqk_phy_iq_bb_reg so rename the array to rtl8xxxu_iqk_phy_iq_bb_reg. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723bu_simularity_compare()Jes Sorensen
This renames rtl8723bu_simularity_compare() to rtl8xxxu_gen2_simularity_compare() to reflect it is used for all gen2 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723b_channel_to_group()Jes Sorensen
This renames rtl8723b_channel_to_group() to rtl8xxxu_gen2_channel_to_group() to reflect it is used by all currently supported gen2 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723a_mac_init_table to rtl8xxxu_gen1_mac_init_tableJes Sorensen
All currently supported gen1 parts use the same mac_init_table, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723a_enable_rf() to rtl8xxxu_gen1_enable_rf()Jes Sorensen
All gen1 parts use the same enable_rf() function, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723a_set_tx_power() to rtl8xxxu_gen1_set_tx_power()Jes Sorensen
All gen1 parts use the same interface for setting TX power, so rename the function to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_init_phy_bb() to rtl8xxxu_gen1_init_phy_bb()Jes Sorensen
All gen1 parts use the same init_phy_bb() function, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_phy_iq_calibrate() to ↵Jes Sorensen
rtl8xxxu_gen1_phy_iq_calibrate() All supported gen1 parts use the same phy_iq_calibrate() function (unlike their gen2 counterparts). Rename the function to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_update_rate_mask() to rtl8xxxu_update_rate_mask()Jes Sorensen
All currently supported gen1 parts use the same function for updating the rate mask, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_config_channel() to rtl8xxxu_gen1_config_channel()Jes Sorensen
All supported gen1 parts use the same config_channel() function, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723a_disable_rf() to rtl8xxxu_gen1_disable_rf()Jes Sorensen
All currently supported gen1 parts use the same disable_rf() routine, so rename the function to reflect that. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723b_disable_rf() to rtl8xxxu_gen2_disable_rf()Jes Sorensen
At least for now, all gen2 parts use the same disable_rf() function Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723bu_config_channel() to rtl8xxxu_gen2_config_channel()Jes Sorensen
Rename the function to indicate it is applicable to most/all gen2 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_report_connect() to rtl8xxxu_gen1_report_connect()Jes Sorensen
Rename the function to reflect it is for all/most gen1 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-13 16:00:46 +0000