summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-04-14mwifiex: missing break statementAmitkumar Karwar
This patch adds missing break statement at the end of PCIE_DEVICE_ID_MARVELL_88W8897 switch section. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: create common function for handling brcmf_proto_hdrpull()Arend van Spriel
In receive path brcmf_proto_hdrpull() needs to be called and handled similar in brcmf_rx_frame() and brcmf_rx_event(). Move that duplicated code in separate function. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: revise handling events in receive pathArend van Spriel
Move event handling out of brcmf_netif_rx() avoiding the need to pass a flag. This flag is only ever true for USB hosts as other interface use separate brcmf_rx_event() function. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: cleanup ampdu-rx host reorder codeArend van Spriel
The code for ampdu-rx host reorder is related to the firmware signalling supported in BCDC protocol. This change moves the code to fwsignal module. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: screening firmware event packetFranky Lin
Firmware uses asynchronized events as a communication method to the host. The event packets are marked as ETH_P_LINK_CTL protocol type. For SDIO and PCIe bus, this kind of packets are delivered through virtual event channel not data channel. This patch adds a screening logic to make sure the event handler only processes the events coming from the correct channel. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: fix p2p scan abort null pointer exceptionHante Meuleman
When p2p connection setup is performed without having ever done an escan a null pointer exception can occur. This is because the ifp to abort scanning is taken from escan struct while it was never initialized. Fix this by using the primary ifp for scan abort. The abort should still be performed and all scan related commands are performed on primary ifp. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: insert default boardrev in nvram data if missingHante Meuleman
Some nvram files/stores come without the boardrev information, but firmware requires this to be set. When not found in nvram then add a default boardrev string to the nvram data. Reported-by: Rafal Milecki <zajec5@gmail.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: fix clearing wowl wake indicatorsHante Meuleman
Newer firmwares require the usage of the wowl wakeind struct as size for the iovar to clear the wake indicators. Older firmwares do not care, so change the used size. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: clear eventmask array before using itHante Meuleman
When the event_msgs iovar is set an array is used to configure the enabled events. This arrays needs to nulled before configuring otherwise unhandled events will be enabled. This solves a problem where in case of wowl the host got woken by an incorrectly enabled event. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Adjust AFE crystal value on 8192euJes Sorensen
Adjust AFE before enabling PLL on 8192eu, probably also needed for 8723bu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Implement IQK calibration for 8192euJes Sorensen
8192eu has it's own IQK calibration procedure, and notably uses undocumented RF register 0x56 in the process. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Use proper register name for REG_PAD_CTRL1Jes Sorensen
Fixup another case where the hard coded register value was used instead of the name. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Implement 8192eu device specific quirksJes Sorensen
Set REG_QUEUE_CTRL and REG_ACLK_MON for 8192eu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Fix LDPC RX hang issue on 8192euJes Sorensen
Implement workaround for LDPC RX hands on 8192eu. This was inspired by workaround found in the 8192eu vendor driver. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Set REG_USB_HRPWM for 8192euJes Sorensen
The vendor driver set register 0xfe58 REG_USB_HWPWM in it's init sequence for 8192eu. Do the same here. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Set correct interrupt masking registers on 8192euJes Sorensen
Set HIMR[01] on 8192eu instead of HISR/HIMR. It's not obvious this really matters for USB devices, but this matches the register writes performed by the vendor driver. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Handle XTAL value setting on 8192euJes Sorensen
Set REG_AFE_XTAL_CTRL on 8192eu to the vendor driver value, and do not skip setting REG_MAX_AGGR_NUM on 8192eu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Provide special handling when writing RF regs on 8192euJes Sorensen
The 8192eu requires clearing/restoring bit 17 in REG_FPGA0_POWER_SAVE before/after writing RF registers. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Handle BB init for 8192euJes Sorensen
The 8192eu does not use REG_AFE_PLL_CTRL in it's BB init sequence, so provide device specific handling. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Correctly parse 8192eu efuseJes Sorensen
The 8192eu efuse only has power data for path A and B. It follows the same layout as 8723bu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Pick PHY init table based on chip version firstJes Sorensen
Pick PHY init table based on device before distinguishing between 1T/2T/high PA tables. The latter is only currently used for 8188cu/8192cu/8188ru. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add 8192eu PHY init tableJes Sorensen
The 8192eu also requires it's own PHY init table. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add 8192eu AGC tablesJes Sorensen
A device specific AGC table is required for the 8192eu as well. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add radio init tables for 8192euJes Sorensen
Add the required radio init tables for 8192eu devices. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Set TX page boundaries for 8192euJes Sorensen
The 8192eu also has it's own TRXFF boundary value to set. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Do not mess with AFE_XTAL_CTRL on 8192euJes Sorensen
To match the vendor driver, do not mess with AFE_XTAL_CTRL on 8192eu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add MAC init table for 8192euJes Sorensen
The 8192eu requires a different MAC init table. Add the missing table and specify the table to use in the fileops structure. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14ravb: make ravb_ptp_interrupt() *void*Sergei Shtylyov
When we have the ISS.CGIS bit set, we already know that gPTP interrupt has happened, so an extra GIS register check at the end of ravb_ptp_interrupt() seems superfluous. We can model the gPTP interrupt handler like all other dedicated interrupt handlers in the driver and make it *void*. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qed* - bump driver versions to 8.7.1.20Yuval Mintz
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qede: add Rx flow hash/indirection support.Sudarsana Reddy Kalluru
Adds support for the following via ethtool: - UDP configuration of RSS based on 2-tuple/4-tuple. - RSS hash key. - RSS indirection table. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qed: add Rx flow hash/indirection support.Sudarsana Reddy Kalluru
Adds the required API for passing RSS-related configuration from qede. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qed*: remove version dependencyRahul Verma
Inbox drivers don't need versioning scheme in order to guarantee compatibility, as both qed and qede are compiled from same codebase. Signed-off-by: Rahul Verma <rahul.verma@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14net: bcmgenet: add BQL supportPetri Gynther
Add Byte Queue Limits (BQL) support to bcmgenet driver. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2016-04-13 This series contains updates to i40e, i40evf and fm10k. Alex fixes a bug introduced earlier based on his interpretation of the XL710 datasheet. The actual limit for fragments with TSO and a skbuff that has payload data in the header portion of the buffer is actually only 7 fragments and the skb-data portion counts as 2 buffers, one for the TSO header, and the one for a segment payload buffer. Jacob fixes a bug where in a previous refactor of the code broke multi-bit updates for VFs. The problem occurs because a multi-bit request has a non-zero length, and the PF would simply drop any request with the upper 16 bits set. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: bcmgenet: use __napi_schedule_irqoff()Florian Fainelli
bcmgenet_isr1() and bcmgenet_isr0() run in hard irq context, we do not need to block irq again. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: bcmgenet: use napi_complete_done()Eric Dumazet
By using napi_complete_done(), we allow fine tuning of /sys/class/net/ethX/gro_flush_timeout for higher GRO aggregation efficiency for a Gbit NIC. Check commit 24d2e4a50737 ("tg3: use napi_complete_done()") for details. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Petri Gynther <pgynther@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13fm10k: fix multi-bit VLAN update requests from VFJacob Keller
The VF uses a multi-bit update request to clear unused VLANs whenever it resets. However, an accident in a previous refector broke multi-bit updates for VFs, due to misreading a comment in fm10k_vf.c and attempting to reduce code duplication. The problem occurs because a multi-bit request has a non-zero length, and the PF would simply drop any request with the upper 16 bits set. We can't simply remove the check of the upper 16 bits and the call to fm10k_iov_select vid, because this would remove the checks for default VID and for ensuring no other VLANs can be enabled except pf_vid when it has been set. To resolve that issue, this revision uses the iov_select_vid when we have a single-bit update, and denies any multi-bit update when the VLAN was administratively set by the PF. This should be ok since the PF properly updates VLAN_TABLE when it assigns the PF vid. This ensures that requests to add or remove the PF vid work as expected, but a rogue VF could not use the multi-bit update as a loophole to attempt receiving traffic on other VLANs. Reported-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-13net: thunderx: Fix broken of_node_put() code.David Daney
commit b7d3e3d3d21a ("net: thunderx: Don't leak phy device references on -EPROBE_DEFER condition.") incorrectly moved the call to of_node_put() outside of the loop. Under normal loop exit, the node has already had of_node_put() called, so the extra call results in: [ 8.228020] ERROR: Bad of_node_put() on /soc@0/pci@848000000000/mrml-bridge0@1,0/bgx0/xlaui00 [ 8.239433] CPU: 16 PID: 608 Comm: systemd-udevd Not tainted 4.6.0-rc1-numa+ #157 [ 8.247380] Hardware name: www.cavium.com EBB8800/EBB8800, BIOS 0.3 Mar 2 2016 [ 8.273541] Call trace: [ 8.273550] [<fffffc0008097364>] dump_backtrace+0x0/0x210 [ 8.273557] [<fffffc0008097598>] show_stack+0x24/0x2c [ 8.273560] [<fffffc0008399ed0>] dump_stack+0x8c/0xb4 [ 8.273566] [<fffffc00085aa828>] of_node_release+0xa8/0xac [ 8.273570] [<fffffc000839cad8>] kobject_cleanup+0x8c/0x194 [ 8.273573] [<fffffc000839c97c>] kobject_put+0x44/0x6c [ 8.273576] [<fffffc00085a9ab0>] of_node_put+0x24/0x30 [ 8.273587] [<fffffc0000bd0f74>] bgx_probe+0x17c/0xcd8 [thunder_bgx] [ 8.273591] [<fffffc00083ed220>] pci_device_probe+0xa0/0x114 [ 8.273596] [<fffffc0008473fbc>] driver_probe_device+0x178/0x418 [ 8.273599] [<fffffc000847435c>] __driver_attach+0x100/0x118 [ 8.273602] [<fffffc0008471b58>] bus_for_each_dev+0x6c/0xac [ 8.273605] [<fffffc0008473884>] driver_attach+0x30/0x38 [ 8.273608] [<fffffc00084732f4>] bus_add_driver+0x1f8/0x29c [ 8.273611] [<fffffc0008475028>] driver_register+0x70/0x110 [ 8.273617] [<fffffc00083ebf08>] __pci_register_driver+0x60/0x6c [ 8.273623] [<fffffc0000bf0040>] bgx_init_module+0x40/0x48 [thunder_bgx] [ 8.273626] [<fffffc0008090d04>] do_one_initcall+0xcc/0x1c0 [ 8.273631] [<fffffc0008198abc>] do_init_module+0x68/0x1c8 [ 8.273635] [<fffffc0008125668>] load_module+0xf44/0x11f4 [ 8.273638] [<fffffc0008125b64>] SyS_finit_module+0xb8/0xe0 [ 8.273641] [<fffffc0008093b30>] el0_svc_naked+0x24/0x28 Go back to the previous (correct) code that only did the extra of_node_put() call on early exit from the loop. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13i40e/i40evf: Limit TSO to 7 descriptors for payload instead of 8 per packetAlexander Duyck
This patch addresses a bug introduced based on my interpretation of the XL710 datasheet. Specifically section 8.4.1 states that "A single transmit packet may span up to 8 buffers (up to 8 data descriptors per packet including both the header and payload buffers)." It then later goes on to say that each segment for a TSO obeys the previous rule, however it then refers to TSO header and the segment payload buffers. I believe the actual limit for fragments with TSO and a skbuff that has payload data in the header portion of the buffer is actually only 7 fragments as the skb->data portion counts as 2 buffers, one for the TSO header, and one for a segment payload buffer. Fixes: 2d37490b82af ("i40e/i40evf: Rewrite logic for 8 descriptor per packet check") Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-13drivers/net/ethernet/jme.c: Deinline jme_reset_mac_processor, save 2816 bytesDenys Vlasenko
This function compiles to 895 bytes of machine code. Clearly, this isn't a time-critical function. For one, it has a number of udelay(1) calls. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: ethernet: renesas: ravb_main: test clock rate to avoid division by 0Wolfram Sang
The clk API may return 0 on clk_get_rate, so we should check the result before using it as a divisor. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: ethernet: stmmac: GMAC4.xx: Fix TX descriptor preparationAlexandre TORGUE
On GMAC4.xx each descriptor contains 2 buffers of 16KB (each). Initially, those 2 buffers was filled in dwmac4_rd_prepare_tx_desc but it is actually not needed. Indeed, stmmac driver supports frame up to 9000 bytes (jumbo). So only one buffer is needed. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13dsa: mv88e6xxx: Use bus in mv88e6xxx_lookup_name()Andrew Lunn
mv88e6xxx_lookup_name() returns the model name of a switch at a given address on an MII bus. Using mii_bus to identify the bus rather than the host device is more logical, so change the parameter. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13dsa: Rename phys_port_mask to enabled_port_maskAndrew Lunn
The phys in phys_port_mask suggests this mask is about PHYs. In fact, it means physical ports. Rename to enabled_port_mask, indicating external enabled ports of the switch, which is hopefully less confusing. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Rename DSA probe function.Andrew Lunn
Rename the function called from the DSA to perform a probe for the switch. This makes the normal _probe() name available for a standard Linux device driver probe function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Keep the mii bus and address in the private structureAndrew Lunn
Rather than looking up the mii bus and address every time, do it once at probe, and keep it in the private structure. Centralise this probe code in mv88e6xxx. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Have the switch driver allocate there own private memoryAndrew Lunn
Now the switch devices have a dev pointer, make use of it for allocating the drivers private data structures using a devm_kzalloc(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Pass the dsa device to the switch driversAndrew Lunn
By passing a device structure to the switch devices, it allows them to use devm_* methods for resource management. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13Merge tag 'mac80211-next-for-davem-2016-04-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== To synchronize with Kalle, here's just a big change that affects all drivers - removing the duplicated enum ieee80211_band and replacing it by enum nl80211_band. On top of that, just a small documentation update. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13Merge tag 'wireless-drivers-for-davem-2016-04-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.6 b43 * fix memory leaks when removing the device bcma * fix building without OF_IRQ rtlwifi * fix gcc-6 indentation warning iwlwifi * lower the debug level of a benign print * fix a memory leak ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 20:18:38 +0000