summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-11-15iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560Johannes Berg
This is dead code, nothing uses the IWL_DEVICE_22560 macro and thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all. While at it, remove some code and definitions used only in this case, and clean up some comments/names that still refer to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: sync the iwl_mvm_session_prot_notif layoutEmmanuel Grumbach
The firmware API has changed a little bit but this change has no impact on the flow and is backward compatible. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: start CTDP budget from 2400mAMordechay Goodstein
The current budget of 2000mA is preventing us from reaching maximum throughput. According to our system engineers, we can increase the maximum budget to 2400mA to solve this problem. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: don't skip mgmt tid when flushing all tidsHaim Dreyfuss
There are various of flows which require tids flushing (disconnection, suspend, etc...). Currently, when the driver instructs the FW to flush he masks all the data tids(0-7). However, the driver doesn't set the management tid (#15) which cause the FW not to flush it. When the FW tries to remove the mgmt queue he throws an assert since it is not an empty queue. instead of just set only the data tids set everything and let the FW ignore the invalid tids. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: scan: enable adaptive dwell in p2pShahar S Matityahu
Align to the requirement update and support adaptive dwell in p2p scan. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: refactor the SAR tables from mvm to acpiIhab Zhaika
Refactored the SAR related functions from iwlmvm to acpi in order to make it shared between different opmodes in addition to removing unused variable ppag_rev. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: support scan req cmd ver 12Shahar S Matityahu
Implement scan request command version 12. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: make new scan req versioning flowShahar S Matityahu
Implement a new versioning handling flow supported from version 11 onwards. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: fix unaligned read of rx_pkt_statusWang Xuerui
This is present since the introduction of iwlmvm. Example stack trace on MIPS: [<ffffffffc0789328>] iwl_mvm_rx_rx_mpdu+0xa8/0xb88 [iwlmvm] [<ffffffffc0632b40>] iwl_pcie_rx_handle+0x420/0xc48 [iwlwifi] Tested with a Wireless AC 7265 for ~6 months, confirmed to fix the problem. No other unaligned accesses are spotted yet. Signed-off-by: Wang Xuerui <wangxuerui@qiniu.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: remove redundant assignment to variable bufszColin Ian King
The variable bufsz is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: bump FW API to 51 for 22000 seriesLuca Coelho
Start supporting API version 51 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: FW API: reference enum in docs of modify_maskJohannes Berg
Add a reference to the correct enum rather than showing the pattern of the actual constants. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: print rate_n_flags in a pretty formatMordechay Goodstein
Use the rs_pretty_print_rate() function to print the rate_n_flags in more human-readable format. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: adapt the code to use api ver 11Tova Mussai
FW scan api ver 11 adds support for some new features, in this version the fw did also some cleanup in the api, which causes the driver not to be able to use the current scan req struct. Therefore, in this patch the driver has new version for the scan command code Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: Create function to build scan cmdTova Mussai
Currently, the code to build scan cmd is duplicated in iwl_mvm_reg_scan_start and iwl_mvm_sched_scan_start. Create a function to build this command, and call the function instead. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: create function for scan scheduling paramsTova Mussai
In the next patch, this code will be used from different places. As preparation export this code into function. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: dbg_ini: support dump collection upon assert during D3Shahar S Matityahu
add assert time point in the D3 resume flow in case there was an assert during D3. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: pcie: make iwl_pcie_gen2_update_byte_tbl staticEmmanuel Grumbach
It is called within tx-gen2.c only. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: in VHT connection use only VHT capabilitiesMordechay Goodstein
mac80211 limits amsdu size to the minimum of HT and VHT capabilities but since in a VHT connection we don't transmit HT frames we can discard HT limits. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: nvm: update iwl_uhb_nvm_channelsTova Mussai
Change the UHB channels to start from 1 to match the specs (11ax Draft 5.0). Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: remove else-if in iwl_send_phy_cfg_cmd()Luca Coelho
We return in the if block, so it's unnecessary to have an else statement. Remove it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: fix support for single antenna diversityLuca Coelho
When the single antenna diversity support was sent upstream, only some definitions were sent, due to a bad revert. Fix this by adding the actual code. Fixes: 5952e0ec3f05 ("iwlwifi: mvm: add support for single antenna diversity") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15wcn36xx: fix typoEduardo Abinader
Signed-off-by: Eduardo Abinader <eduardoabinader@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15ath10k: qmi: Sleep for a while before assigning MSA memoryBjorn Andersson
Unless we sleep for a while before transitioning the MSA memory to WLAN the MPSS.AT.4.0.c2-01184-SDM845_GEN_PACK-1 firmware triggers a security violation fairly reliably. Unforutnately recovering from this failure always results in the entire system freezing. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15ath10k: Revert "ath10k: add cleanup in ath10k_sta_state()"Bjorn Andersson
This reverts commit 334f5b61a6f29834e881923b98d1e27e5ce9620d. This caused ath10k_snoc on Qualcomm MSM8998, SDM845 and QCS404 platforms to trigger an assert in the firmware: err_qdi.c:456:EF:wlan_process:1:cmnos_thread.c:3900:Asserted in wlan_vdev.c:_wlan_vdev_up:3219 Revert the offending commit for now. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14octeontx2-af: Start/Stop traffic in CGX along with NPCSubbaraya Sundeep
Traffic for a CGX mapped NIXLF can be stopped by disabling entries in NPC MCAM or by configuring CGX and mailbox messages exist for the two options. If traffic is stopped at CGX then VFs of that PF are also effected hence CGX traffic should be started/stopped by tracking all the users of it. This patch implements that CGX users tracking. CGX is also configured along with NPC if required. Also removed a check which mandates even number of LBK VFs. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Add option to disable dynamic entry caching in NDCSunil Goutham
A config option is added to disable caching of dynamic entries like SQEs and stack pages. Also locks down all HW contexts in NDC, preventing them from being evicted. This option is useful when the queue count is large and there are huge NDC cache misses. It's trade off between SQ context misses and dynamically changing entries like SQE and stack page pointers. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Support configurable NDC cache way_maskGeetha sowjanya
Each of the NIX/NPA LFs can choose which ways of their respective NDC caches should be used to cache their contexts. This enables flexible configurations like disabling caching for a LF, limiting it's context to a certain set of ways etc etc. Separate way_mask for NIX-TX and NIX-RX is not supported. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Enable broadcast packet replicationSunil Goutham
Ingress packet replication support has been added to 96xx B0 silicon. This patch enables using that feature to replicate ingress broadcast packets to PF and it's VFs. Also fixed below issues - VFs can also install NPC MCAM entry to forward broadcast pkts. Otherwise, unless PF's interface is UP, VFs will not receive bcast packets. - NPC MCAM entry is disabled when PF and all it's VFs are down. - Few corner cases in installing multicast entry list. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Support fixed transmit scheduler topologySunil Goutham
CN96xx initial silicon doesn't support all features pertaining to NIX transmit scheduling and shaping. - It supports a fixed topology of 1:1 mapped transmit limiters at all levels. - Supports DWRR only at SMQ/MDQ and TL1. - Doesn't support shaping and coloring. This patch adds HW capability structure by which each variant and skew of silicon can be differentiated by their supported features. And adds support for A0 silicon's transmit scheduler capabilities or rather limitations. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Add more RSS algorithmsKiran Kumar K
This patch adds support for few more RSS key types for flow key algorithm to compute rss hash index. Following flow key types have been added. - Tunnel types like NVGRE, VXLAN, GENEVE. - L2 offload type ETH_DMAC, Here we will consider only DMAC 6 bytes. - And extension header IPV6_EXT (1 byte followed by IPV6 header - Hashing inner protocol fields for inner DMAC, IPv4/v6, TCP, UDP, SCTP. Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Clear NPC MCAM entries before updateNithin Dabilpuram
Writing into NPC MCAM1 and MCAM0 registers are suppressed if they happened to form a reserved combination. Hence clear and disable MCAM entries before update. For HRM: [CAM(1)]<n>=1, [CAM(0)]<n>=1: Reserved. The reserved combination is not allowed. Hardware suppresses any write to CAM(0) or CAM(1) that would result in the reserved combination for any CAM bit. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Update NPC KPU packet parsing profileHao Zheng
Updated NPC KPU packet parsing profile with support for following - Fragmentation support for IPv4 IPv6 outer header - NIX instruction header support - QinQ with TPID of 0x8100 as non inner most vlan tag, as legacy network equipments still generate QinQ packets with this configuration. - To better support RSS for tunnelled packets, udp based tunnel protocols such as vxlan, vxlan-gpe, geneve and gtpu are now captured into a separate layer E. Consequently, the inner packet headers are pushed one layer down to LF, LG, and LH accordingly. - Support for rfc7510 mpls in udp. Up to 4 MPLS labels can be parsed and captured in one layer LE. - Parser support for DSA, extended DSA and eDSA tags right after ethernet header by Marvell SOHO and Falcon switches. For extended DSA and eDSA tags, a special PKIND of 62 is used, as these tags don't contain a tpid field. - Higig2 protocol header parsing support, added a NPC_LT_LA_HIGIG2_ETHER for a combined header of HIGIG2 and Ethernet. Add a NPC_LT_LA_IH_NIX_HIGIG2_ETHER for a combined header of nix_ih, HIGIG2 and Ethernet on egress side. Also added 2 upper flags in LA to indicate the presence of nix_ih and HIGIG2. Other changes include - IPv4.TTL==0 IPv6.HLIM==0 check - Per RFC 1858, mark fragment offset == 1 as error - TCP invalid flags check - Separate error codes for outer and inner IPv4 checksum errors. - Fix a parser error when KPU parses incoming IPSec ESP and AH packets - NPC vtag capture/strip hardware expect tag pointer to point to tpid/ethertype instead of tci. So move lb_ptr to point to tpid/ethertype. - Fix npc parser error when parsing udp packets that don't have any payload. - For a single MCAM entry to match on packets with one or stacked vlan tags combine NPC_LT_LB_STAG and NPC_LT_LB_QINQ to NPC_LT_LB_STAG_QINQ. - NVGRE to have a separate ltype LD_NVGRE instead of combined with LD_GRE. - Reserve top LD/LTYPEs to support custom KPU profile fields. Signed-off-by: Hao Zheng <haoz@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Add macro to generate mbox handlers declarationsSubbaraya Sundeep
For every mailbox handler added to rvu, we are adding a function declaration in rvu header file. Cleaned this up by adding a macro to generate these declarations automatically. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Sync hw mbox with bounce buffer.Geetha sowjanya
If mailbox client has a bounce buffer or a intermediate buffer where mbox messages are framed then copy them from there to HW buffer. If 'mbase' and 'hw_mbase' are not same then assume 'mbase' points to bounce buffer. This patch also adds msg_size field to mbox header to copy only valid data instead of whole buffer. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Add mbox API to validate all responsesSunil Goutham
Added a new mailbox API which goes through all responses to check their IDs and response codes. Also added logic to prevent queuing multiple works to process the same mailbox message. This scenario happens when AF is processing a PF's request and menawhile PF sends ACK to AF sent UP message, then mbox_hdr->num_msgs in the PF->AF DOWN mbox region will be nonzero and AF will end up processing PF's request again. This is fixed by taking a backup of num_msgs counter and clearing the same in the mbox region before scheduling work. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Add NPC MCAM entry allocation status to debugfsSunil Goutham
Added support to display current NPC MCAM entries and counter's allocation status ín debugfs. cat /sys/kernel/debug/octeontx2/npc/mcam_info' will dump following info - MCAM Rx and Tx keysize - Total MCAM entries and counters - Current available count - Count of number of MCAM entries and counters allocated by a RVU PF/VF device. Also, one NPC MCAM counter (last one) is reserved and mapped to NPC RX_INTF's MISS_ACTION to count dropped packets due to no MCAM entry match. This pkt drop counter can be checked via debugfs. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Add per CGX port level NIX Rx/Tx countersLinu Cherian
A CGX port is shared by a RVU PF and it's VFs. These per CGX port level NIX Rx/Tx counters are cumilative stats of all NIXLFs sharing this port. These stats when compared to CGX Rx/Tx stats helps in identifying pkts dropped within the system, if any. Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Add CGX LMAC stats to debugfsPrakash Brahmajyosyula
This patch adds CGX LMAC physical interface or serdes Rx/Tx packet stats to debugfs. 'cat cgx<idx>/lmac<idx>/stats' dumps the current interface link status and Rx/Tx stats. Stats include pkt received/transmitted, dropped, pause frames etc etc. Signed-off-by: Prakash Brahmajyosyula <bprakash@marvell.com> Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Add NDC block stats to debugfs.Prakash Brahmajyosyula
NDC is a data cache unit which caches NPA and NIX block's aura/pool/RQ/SQ/CQ/etc contexts to reduce number of costly DRAM accesses. This patch adds support to dump cache's performance stats like cache line hit/miss counters, average cycles taken for accessing cached and non-cached data. This will help in checking if NPA/NIX context reads/writes are having NDC cache misses which inturn might effect performance. Also changed NDC enums to reflect correct NDC hardware instance. Signed-off-by: Prakash Brahmajyosyula <bprakash@marvell.com> Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Add NIX RQ, SQ and CQ contexts to debugfsPrakash Brahmajyosyula
To aid in debugging NIX block related issues, added support to dump NIX block LF's RQ, SQ and CQ hardware contexts in debugfs. User can check which contexts are enabled currently and dump it's current HW context. Four new files 'qsize', 'rq_ctx', 'sq_ctx' and 'cq_ctx' are added to the debugfs at 'sys/kernel/debug/octeontx2/nix/' 'echo <nixlf index> > qsize' will display current enabled CQ/SQ/RQs. 'echo <nixlf> [rq number/all] > rq_ctx', 'echo <nixlf> [sq number/all] > sq_ctx' & 'echo <nixlf> [cq number/all] > cq_ctx' will dump RQ/SQ/CQ's current hardware context. Signed-off-by: Prakash Brahmajyosyula <bprakash@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Add NPA aura and pool contexts to debugfsChristina Jacob
To aid in debugging NPA related issues, added support to dump NPA (pool allocator) block LF's aura and pool hardware contexts in debugfs. User can check which contexts are enabled currently and dump it's current HW context. Three new files 'qsize', 'aura_ctx', 'pool_ctx' are added to the debugfs at 'sys/kernel/debug/octeontx2/npa/' 'echo <npalf index> > qsize' will display current enabled Aura/Pools. 'echo <npalf> [aura number/all] > aura_ctx' & 'echo <npalf> [aura number/all] > pool_ctx' will dump Aura/Pool context info. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Prakash Brahmajyosyula <bprakash@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14octeontx2-af: Dump current resource provisioning statusChristina Jacob
Added support to dump current resource provisioning status of all resource virtualization unit (RVU) block's (i.e NPA, NIX, SSO, SSOW, CPT, TIM) local functions attached to a PF_FUNC into a debugfs file. 'cat /sys/kernel/debug/octeontx2/rsrc_alloc' will show the current block LF's allocation status. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Prakash Brahmajyosyula <bprakash@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14net: hns3: fix ETS bandwidth validation bugYonglong Liu
Some device only support 4 TCs, but the driver check the total bandwidth of 8 TCs, so may cause wrong configurations write to the hw. This patch uses hdev->tc_max to instead HNAE3_MAX_TC to fix it. Fixes: e432abfb99e5 ("net: hns3: add common validation in hclge_dcb") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14net: hns3: reallocate SSU' buffer size when pfc_en changesYunsheng Lin
When a TC's PFC is disabled or enabled, the RX private buffer for this TC need to be changed too, otherwise this may cause packet dropped problem. This patch fixes it by calling hclge_buffer_alloc to reallocate buffer when pfc_en changes. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14net: hns3: add compatible handling for MAC VLAN switch parameter configurationGuangbin Huang
Previously, hns3 driver just directly send specific setting bit and mask bits of MAC VLAN switch parameter to the firmware, it can not be compatible with the old firmware, because the old one ignores mask bits and covers all bits with new setting bits. So when running with old firmware, the communication between PF and VF will fail after resetting or configuring spoof check, since they will do the MAC VLAN switch parameter configuration. This patch fixes this problem by reading switch parameter firstly, then just modifies the corresponding bit and sends it to firmware. Fixes: dd2956eab104 ("net: hns3: not allow SSU loopback while execute ethtool -t dev") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14ravb: implement MTU change while device is upUlrich Hecht
Pre-allocates buffers sufficient for the maximum supported MTU (2026) in order to eliminate the possibility of resource exhaustion when changing the MTU while the device is up. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14net: mvneta: fix build skb for bm capable devicesLorenzo Bianconi
Fix build_skb for bm capable devices when they fall-back using swbm path (e.g. when bm properties are configured in device tree but CONFIG_MVNETA_BM_ENABLE is not set). In this case rx_offset_correction is overwritten so we need to use it building skb instead of MVNETA_SKB_HEADROOM directly Fixes: 8dc9a0888f4c ("net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine") Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reported-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14Merge tag 'mlx5-updates-2019-11-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-11-12 1) Merge mlx5-next for devlink reload and flowtable offloads dependencies 2) Devlink reload support 3) TC Flowtable offloads 4) Misc cleanup ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14r8169: use r8168d_modify_extpage in rtl8168f_config_eee_phyHeiner Kallweit
Use r8168d_modify_extpage() also in rtl8168f_config_eee_phy() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 07:53:38 +0000