summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-09-30octeontx2-af: Adjust LA pointer for cpt parse headerKiran Kumar K
In case of ltype NPC_LT_LA_CPT_HDR, LA pointer is pointing to the start of cpt parse header. Since cpt parse header has veriable length padding, this will be a problem for DMAC extraction. Adding KPU profile changes to adjust the LA pointer to start at ether header in case of cpt parse header by - Adding ptr advance in pkind 58 to a fixed value 40 - Adding variable length offset 7 and mask 7 (pad len in CPT_PARSE_HDR). Also added the missing static declaration for npc_set_var_len_offset_pkind function. Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29gve: Use kvcalloc() instead of kvzalloc()Gustavo A. R. Silva
Use 2-factor argument form kvcalloc() instead of kvzalloc(). Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: phy: bcm7xxx: Fixed indirect MMD operationsFlorian Fainelli
When EEE support was added to the 28nm EPHY it was assumed that it would be able to support the standard clause 45 over clause 22 register access method. It turns out that the PHY does not support that, which is the very reason for using the indirect shadow mode 2 bank 3 access method. Implement {read,write}_mmd to allow the standard PHY library routines pertaining to EEE querying and configuration to work correctly on these PHYs. This forces us to implement a __phy_set_clr_bits() function that does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd functions are always called with that lock held. Fixes: 83ee102a6998 ("net: phy: bcm7xxx: add support for 28nm EPHY") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net/mlx4: Use array_size() helper in copy_to_user()Gustavo A. R. Silva
Use array_size() helper instead of the open-coded version in copy_to_user(). These sorts of multiplication factors need to be wrapped in array_size(). Link: https://github.com/KSPP/linux/issues/160 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: disable firmware compatible features when uninstall PFGuangbin Huang
Currently, the firmware compatible features are enabled in PF driver initialization process, but they are not disabled in PF driver deinitialization process and firmware keeps these features in enabled status. In this case, if load an old PF driver (for example, in VM) which not support the firmware compatible features, firmware will still send mailbox message to PF when link status changed and PF will print "un-supported mailbox message, code = 201". To fix this problem, disable these firmware compatible features in PF driver deinitialization process. Fixes: ed8fb4b262ae ("net: hns3: add link change event report") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: fix always enable rx vlan filter problem after selftestGuangbin Huang
Currently, the rx vlan filter will always be disabled before selftest and be enabled after selftest as the rx vlan filter feature is fixed on in old device earlier than V3. However, this feature is not fixed in some new devices and it can be disabled by user. In this case, it is wrong if rx vlan filter is enabled after selftest. So fix it. Fixes: bcc26e8dc432 ("net: hns3: remove unused code in hns3_self_test()") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: PF enable promisc for VF when mac table is overflowGuangbin Huang
If unicast mac address table is full, and user add a new mac address, the unicast promisc needs to be enabled for the new unicast mac address can be used. So does the multicast promisc. Now this feature has been implemented for PF, and VF should be implemented too. When the mac table of VF is overflow, PF will enable promisc for this VF. Fixes: 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: fix show wrong state when add existing uc mac addressJian Shen
Currently, if function adds an existing unicast mac address, eventhough driver will not add this address into hardware, but it will return 0 in function hclge_add_uc_addr_common(). It will cause the state of this unicast mac address is ACTIVE in driver, but it should be in TO-ADD state. To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST if mac address is existing, and delete two error log to avoid printing them all the time after this modification. Fixes: 72110b567479 ("net: hns3: return 0 and print warning when hit duplicate MAC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLEJian Shen
HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is supposed to set when enable multiple TCs with ets. But the driver mixed the flags when updating the tm configuration. Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE too, so remove the unnecessary limitation. Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: don't rollback when destroy mqprio failJian Shen
For destroy mqprio is irreversible in stack, so it's unnecessary to rollback the tc configuration when destroy mqprio failed. Otherwise, it may cause the configuration being inconsistent between driver and netstack. As the failure is usually caused by reset, and the driver will restore the configuration after reset, so it can keep the configuration being consistent between driver and hardware. Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: remove tc enable checkingJian Shen
Currently, in function hns3_nic_set_real_num_queue(), the driver doesn't report the queue count and offset for disabled tc. If user enables multiple TCs, but only maps user priorities to partial of them, it may cause the queue range of the unmapped TC being displayed abnormally. Fix it by removing the tc enable checking, ensure the queue count is not zero. With this change, the tc_en is useless now, so remove it. Fixes: a75a8efa00c5 ("net: hns3: Fix tc setup when netdev is first up") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: do not allow call hns3_nic_net_open repeatedlyJian Shen
hns3_nic_net_open() is not allowed to called repeatly, but there is no checking for this. When doing device reset and setup tc concurrently, there is a small oppotunity to call hns3_nic_net_open repeatedly, and cause kernel bug by calling napi_enable twice. The calltrace information is like below: [ 3078.222780] ------------[ cut here ]------------ [ 3078.230255] kernel BUG at net/core/dev.c:6991! [ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1 [ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021 [ 3078.276801] Workqueue: hclge hclge_service_task [hclge] [ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 3078.296168] pc : napi_enable+0x80/0x84 tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3] [ 3078.314771] sp : ffff8000108abb20 [ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300 [ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000 [ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880 [ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000 [ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930 [ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4 [ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8 [ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344 [ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938 [ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0 [ 3078.414657] Call trace: [ 3078.418517] napi_enable+0x80/0x84 [ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3] [ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3] [ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge] [ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge] [ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge] [ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge] [ 3078.475675] process_one_work+0x1dc/0x48c [ 3078.481888] worker_thread+0x15c/0x464 [ 3078.487104] kthread+0x160/0x170 [ 3078.492479] ret_from_fork+0x10/0x18 [ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000) [ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]--- Once hns3_nic_net_open() is excute success, the flag HNS3_NIC_STATE_DOWN will be cleared. So add checking for this flag, directly return when HNS3_NIC_STATE_DOWN is no set. Fixes: e888402789b9 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: phy: micrel: Add support for LAN8804 PHYHoratiu Vultur
The LAN8804 PHY has same features as that of LAN8814 PHY except that it doesn't support 1588, SyncE or Q-USGMII. This PHY is found inside the LAN966X switches. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setupFeng Zhou
The ixgbe driver currently generates a NULL pointer dereference with some machine (online cpus < 63). This is due to the fact that the maximum value of num_xdp_queues is nr_cpu_ids. Code is in "ixgbe_set_rss_queues"". Here's how the problem repeats itself: Some machine (online cpus < 63), And user set num_queues to 63 through ethtool. Code is in the "ixgbe_set_channels", adapter->ring_feature[RING_F_FDIR].limit = count; It becomes 63. When user use xdp, "ixgbe_set_rss_queues" will set queues num. adapter->num_rx_queues = rss_i; adapter->num_tx_queues = rss_i; adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); And rss_i's value is from f = &adapter->ring_feature[RING_F_FDIR]; rss_i = f->indices = f->limit; So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup", for (i = 0; i < adapter->num_rx_queues; i++) if (adapter->xdp_ring[i]->xsk_umem) It leads to panic. Call trace: [exception RIP: ixgbe_xdp+368] RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297 RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90 RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000 R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000 R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235 10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384 11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd 12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb 13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88 14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319 15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290 16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8 17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64 18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9 19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c So I fix ixgbe_max_channels so that it will not allow a setting of queues to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup, take the smaller value of num_rx_queues and num_xdp_queues. Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller
t-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-09-28 This series contains updates to ice driver only. Dave adds support for QoS DSCP allowing for DSCP to TC mapping via APP TLVs. Ani adds enforcement of DSCP to only supported devices with the introduction of a feature bitmap and corrects messaging of unsupported modules based on link mode. Jake refactors devlink info functions to be void as the functions no longer return errors. Jeff fixes a macro name to properly reflect the value. Len Baker converts a kzalloc allocation to, the preferred, kcalloc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29octeontx2-nicvf: Add PTP hardware clock support to NIX VFNaveen Mamindlapalli
This patch adds PTP PHC support to NIX VF interfaces. This enables a VF to run PTP master/slave instance. PTP block being a shared hardware resource it is recommended to avoid running multiple PTP instances in the system which will impact the PTP clock accuracy. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29octeontx2-pf: Enable promisc/allmulti match MCAM entries.Rakesh Babu
Whenever the interface is brought up/down then set_rx_mode function is called by the stack which enables promisc/allmulti MCAM entries. But there are cases when driver brings interface down and then up such as while changing number of channels. In these cases promisc/allmulti MCAM entries are left disabled as set_rx_mode callback is not called. This patch enables these MCAM entries in all such cases. Signed-off-by: Rakesh Babu <rsaladi2@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28net: mdio-ipq4019: Fix the error for an optional regs resourceCai Huoqing
The second resource is optional which is only provided on the chipset IPQ5018. But the blamed commit ignores that and if the resource is not there it just fails. the resource is used like this, if (priv->eth_ldo_rdy) { val = readl(priv->eth_ldo_rdy); val |= BIT(0); writel(val, priv->eth_ldo_rdy); fsleep(IPQ_PHY_SET_DELAY_US); } This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: fa14d03e014a ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()") Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210928134849.2092-1-caihuoqing@baidu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-28ice: Prefer kcalloc over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. In this case this is not actually dynamic sizes: both sides of the multiplication are constant values. However it is best to refactor this anyway, just to keep the open-coded math idiom out of code. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Fix macro name for IPv4 fragment flagJeff Guo
In IPv4 header, fragment flags indicate whether the packet needs to be fragmented or not. The value 0x20 represents MF (More Fragment); fix the macro name to match this. Signed-off-by: Ting Xu <ting.xu@intel.com> Signed-off-by: Jeff Guo <jia.guo@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: refactor devlink getter/fallback functions to voidJacob Keller
After commit a8f89fa27773 ("ice: do not abort devlink info if board identifier can't be found"), the getter/fallback() functions no longer report an error. Convert the interface to a void so that it is no longer possible to add a version field that is fatal. This makes sense, because we should not fail to report other versions just because one of the version pieces could not be found. Finally, clean up the getter functions line wrapping so that none of them take more than 80 columns, as is the usual style for networking files. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Fix link mode handlingAnirudh Venkataramanan
The messaging for unsupported module detection is different for lenient mode and strict mode. Update the code to print the right messaging for a given link mode. Media topology conflict is not an error in lenient mode, so return an error code only if not in lenient mode. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Add feature bitmap, helpers and a check for DSCPAnirudh Venkataramanan
DSCP a.k.a L3 QoS is only supported on certain devices. To enforce this, this patch introduces a bitmap of features and helper functions. The feature bitmap is set based on device IDs on driver init. Currently, DSCP is the only feature in this bitmap, but there will be more in the future. In the DCB netlink flow, check if the feature bit is set before exercising DSCP. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Add DSCP supportDave Ertman
Implement code to handle submission of APP TLV's containing DSCP to TC mapping. The first such mapping received on an interface will cause that PF to switch to L3 DSCP QoS mode, apply the default config for that mode, and apply the received mapping. Only one such mapping will be allowed per DSCP value, and when the last DSCP mapping is deleted, the PF will switch back into L2 VLAN QoS mode, applying the appropriate default QoS settings. L3 DSCP QoS mode will only be allowed in SW DCBx mode, in other words, when the FW LLDP engine is disabled. Commands that break this mutual exclusivity will be blocked. Co-developed-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28IB/mlx5: Enable UAR to have DevX UIDMeir Lichtinger
UID field was added to alloc_uar and dealloc_uar PRM command, to specify DevX UID for UAR. This change enables firmware validating user access to its own UAR resources. For the kernel allocated UARs the UID will stay 0 as of today. Signed-off-by: Meir Lichtinger <meirl@nvidia.com> Reviewed-by: Yishai Hadas <yishaih@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-09-28mwifiex: avoid null-pointer-subtraction warningArnd Bergmann
clang complains about some NULL pointer arithmetic in this driver: drivers/net/wireless/marvell/mwifiex/sta_tx.c:65:59: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction] pad = ((void *)skb->data - (sizeof(*local_tx_pd) + hroom)- ^ drivers/net/wireless/marvell/mwifiex/uap_txrx.c:478:53: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction] pad = ((void *)skb->data - (sizeof(*txpd) + hroom) - NULL) & Rework that expression to do the same thing using a uintptr_t. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210927121656.940304-1-arnd@kernel.org
2021-09-28ath10k: sdio: Add missing BH locking around napi_schdule()Fabio Estevam
On a i.MX-based board with a QCA9377 Wifi chip, the following errors are seen after launching the 'hostapd' application: hostapd /etc/wifi.conf Configuration file: /etc/wifi.conf wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! Using interface wlan0 with hwaddr 00:1f:7b:31:04:a0 and ssid "thessid" IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: interface state COUNTRY_UPDATE->ENABLED wlan0: AP-ENABLED NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! ... Fix this problem by adding the BH locking around napi-schedule(), in the same way it was done in commit e63052a5dd3c ("mlx5e: add add missing BH locking around napi_schdule()"). Its commit log provides the following explanation: "It's not correct to call napi_schedule() in pure process context. Because we use __raise_softirq_irqoff() we require callers to be in a context which will eventually lead to softirq handling (hardirq, bh disabled, etc.). With code as is users will see: NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! " Fixes: cfee8793a74d ("ath10k: enable napi on RX path for sdio") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210824144339.2796122-1-festevam@denx.de
2021-09-28ath10k: Fix missing frame timestamp for beacon/probe-respLoic Poulain
When receiving a beacon or probe response, we should update the boottime_ns field which is the timestamp the frame was received at. (cf mac80211.h) This fixes a scanning issue with Android since it relies on this timestamp to determine when the AP has been seen for the last time (via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter). Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1629811733-7927-1-git-send-email-loic.poulain@linaro.org
2021-09-28ath10k: high latency fixes for beacon bufferAlagu Sankar
Beacon buffer for high latency devices does not use DMA. other similar buffer allocation methods in the driver have already been modified for high latency path. Fix the beacon buffer allocation left out in the earlier high latency changes. Signed-off-by: Alagu Sankar <alagusankar@silex-india.com> Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> [fabio: adapt it to use ar->bus_param.dev_type ] Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210818232627.2040121-1-festevam@denx.de
2021-09-28gve: DQO: avoid unused variable warningsArnd Bergmann
The use of dma_unmap_addr()/dma_unmap_len() in the driver causes multiple warnings when these macros are defined as empty, e.g. in an ARCH=i386 allmodconfig build: drivers/net/ethernet/google/gve/gve_tx_dqo.c: In function 'gve_tx_add_skb_no_copy_dqo': drivers/net/ethernet/google/gve/gve_tx_dqo.c:494:40: error: unused variable 'buf' [-Werror=unused-variable] 494 | struct gve_tx_dma_buf *buf = This is not how the NEED_DMA_MAP_STATE macros are meant to work, as they rely on never using local variables or a temporary structure like gve_tx_dma_buf. Remote the gve_tx_dma_buf definition and open-code the contents in all places to avoid the warning. This causes some rather long lines but otherwise ends up making the driver slightly smaller. Fixes: a57e5de476be ("gve: DQO: Add TX path") Link: https://lore.kernel.org/netdev/20210723231957.1113800-1-bcf@google.com/ Link: https://lore.kernel.org/netdev/20210721151100.2042139-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28ath11k: Change DMA_FROM_DEVICE to DMA_TO_DEVICE when map reinjected packetsBaochen Qiang
For fragmented packets, ath11k reassembles each fragment as a normal packet and then reinjects it into HW ring. In this case, the DMA direction should be DMA_TO_DEVICE, not DMA_FROM_DEVICE, otherwise invalid payload will be reinjected to HW and then delivered to host. What is more, since arbitrary memory could be allocated to the frame, we don't know what kind of data is contained in the buffer reinjected. Thus, as a bad result, private info may be leaked. Note that this issue is only found on Intel platform. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916064617.20006-1-bqiang@codeaurora.org
2021-09-28ath11k: support SMPS configuration for 6 GHzPradeep Kumar Chitrapu
Parse SMPS configuration from IEs and configure. Without this, SMPS is not enabled for 6 GHz band. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210913175510.193005-3-jouni@codeaurora.org
2021-09-28ath11k: add 6 GHz params in peer assoc commandPradeep Kumar Chitrapu
Currently A-MPDU aggregation parameters are not being configured during peer association for 6 GHz band. Hence, extract these parameters from station's capabilities received in association request and send to firmware. Without this, A-MPDU aggregation is not happening in 6 GHz band. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210913175510.193005-2-jouni@codeaurora.org
2021-09-28ath11k: indicate to mac80211 scan complete with aborted flag for ↵Wen Gong
ATH11K_SCAN_STARTING state Scan failure can not be recovered from when running a loop of the following steps: 1. run scan: "iw wlan scan". 2. run command: echo assert > /sys/kernel/debug/ath11k/qca6490\ hw2.0/simulate_fw_crash immediately after step 1. result: scan failed and can not recover even when wlan recovery succeeds: command failed: Device or resource busy (-16) reason: When scan arrives, WMI_START_SCAN_CMDID is sent to the firmware and function ath11k_mac_op_hw_scan() returns, then simulate_fw_crash arrives and the scan started event does not arrive, and then it starts to do recovery of wlan. __ath11k_mac_scan_finish() which is called from ath11k_core_halt() is one step of recovery, it will not call ieee80211_scan_completed() by logic currently because the scan state is ATH11K_SCAN_STARTING. Thus it leads the scan not being completed in mac80211, and leads all consecutive scans failing with -EBUSY in nl80211_trigger_scan even after wlan recovery success. Indicate scan complete with aborted flag to mac80211 for ATH11K_SCAN_STARTING to allow recovery from scan failed with "Device or resource busy (-16)" after wlan recovery. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914164226.38843-3-jouni@codeaurora.org
2021-09-28ath11k: indicate scan complete for scan canceled when scan runningWen Gong
ath11k prints "Received scan event for unknown vdev" when doing the following test: 1. trigger scan 2. wait 0.2 second 3. iw reg set or 11d scan complete from firmware Reason: When iw reg set or 11d scan complete, the new country code will be set to the firmware, and the new regdomain info indicated to ath11k, then the new channel list will be sent to the firmware. The firmware will cancel the current scan after receiving WMI_SCAN_CHAN_LIST_CMDID which is used for the new channel list, and the state of ath11k is ATH11K_SCAN_RUNNING, then ath11k_get_ar_on_scan_abort() returns NULL and ath11k_scan_event() returns at this point and does not indicate scan completion to mac80211. Indicate scan completion to mac80211 and get rid of the "Received scan event for unknown vdev" print for the above case. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914164226.38843-2-jouni@codeaurora.org
2021-09-28ath11k: add handler for scan event WMI_SCAN_EVENT_DEQUEUEDWen Gong
When wlan interface is up, 11d scan is sent to the firmware, and the firmware needs to spend couple of seconds to complete the 11d scan. If immediately a normal scan from user space arrives to ath11k, then the normal scan request is also sent to the firmware, but the scan started event will be reported to ath11k until the 11d scan complete. When timed out for the scan started in ath11k, ath11k stops the normal scan and the firmware reports WMI_SCAN_EVENT_DEQUEUED to ath11k for the normal scan. ath11k has no handler for the event and then timed out for the scan completed in ath11k_scan_stop(), and ath11k prints the following error message. [ 1491.604750] ath11k_pci 0000:02:00.0: failed to receive scan abort comple: timed out [ 1491.604756] ath11k_pci 0000:02:00.0: failed to stop scan: -110 [ 1491.604758] ath11k_pci 0000:02:00.0: failed to start hw scan: -110 Add a handler for WMI_SCAN_EVENT_DEQUEUED and then complete the scan to get rid of the above error message. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914164226.38843-1-jouni@codeaurora.org
2021-09-28ath11k: add HTT stats support for new statsVenkateswara Naralasetty
Add HTT stats support for, 29-ATH11K_DBG_HTT_EXT_STATS_PEER_CTRL_PATH_TXRX_STATS: Used to dump the control path txrx stats for each connected peer. Usage: echo 29 > /sys/kernel/debug/ieee80211/phyx/ath11k/htt_stats_type cat /sys/kernel/debug/ieee80211/phyx/netdev\:wlan0/stations/ <sta mac>/htt_peer_stats. 31-ATH11K_DBG_HTT_EXT_STATS_PDEV_TX_RATE_TXBF_STATS: Used to dump the per pdev tx rate txbf stats. Usage: echo 31 > /sys/kernel/debug/ieee80211/phyx/ath11k/htt_stats_type cat /sys/kernel/debug/ieee80211/phyx/ath11k/htt_stats 32-ATH11k_DBG_HTT_EXT_STATS_TXBF_OFDMA: Used to dump the TXBF ofdma stats for all ofdma users. Usage: echo 32 > /sys/kernel/debug/ieee80211/phyx/ath11k/htt_stats_type cat /sys/kernel/debug/ieee80211/phyx/ath11k/htt_stats 37-ATH11K_DBG_HTT_EXT_PHY_COUNTERS_AND_PHY_STATS: Used to dump the mac and phy txrx counts and phy stats like per chain rssi and ANI level. Usage: echo 37 > /sys/kernel/debug/ieee80211/phyx/ath11k/htt_stats_type cat /sys/kernel/debug/ieee80211/phyx/ath11k/htt_stats Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00486-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210913223148.208026-6-jouni@codeaurora.org
2021-09-28ath11k: Change masking and shifting in htt statsSeevalamuthu Mariappan
In debugfs_htt_stats.c, masking and shifting is done to get stats values. Instead use GENMASK and FIELD_GET to improve code readability and maintenance. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01105-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210913223148.208026-5-jouni@codeaurora.org
2021-09-28ath11k: Remove htt stats fixed size array usageSeevalamuthu Mariappan
To support the HTT Stats DebugFS interface a single large buffer that contains the stats must be provided to the DebugFS infrastructure. In the current code, for each class of stats, the stats are first formatted in a local on-stack buffer, and then the local buffer is copied to the large DebugFS buffer. This logic has a problem when, for a given class, the formatted stats exceed the size of the on-stack buffer. When this occurs the stats for this class is truncated. In addition, this logic is inefficient since it introduces an unnecessary memory copy. To address these issues, update the logic to no longer use a local on-stack buffer, and instead write the formatted data directly into the large DebugFS buffer. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01105-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210913223148.208026-4-jouni@codeaurora.org
2021-09-28ath11k: Replace HTT_DBG_OUT with scnprintfSeevalamuthu Mariappan
Get rid of macro HTT_DBG_OUT and replace it with scnprintf(). The macro does not do anything else. Added required new line characters to scnprintf() for proper display. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01105-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210913223148.208026-3-jouni@codeaurora.org
2021-09-28ath11k: Rename macro ARRAY_TO_STRING to PRINT_ARRAY_TO_BUFSeevalamuthu Mariappan
Renaming of macro is done to describe the macro functionality better as the macro functionality is modified in next patch-sets. No functional changes are done. Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210913223148.208026-2-jouni@codeaurora.org
2021-09-28ath11k: Fix memory leak in ath11k_qmi_driver_event_workBaochen Qiang
The buffer pointed to by event is not freed in case ATH11K_FLAG_UNREGISTERING bit is set, resulting in memory leak, so fix it. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210913180246.193388-4-jouni@codeaurora.org
2021-09-28ath11k: Fix inaccessible debug registersBaochen Qiang
Current code clears debug registers after SOC global reset performed in ath11k_pci_sw_reset. However at that time those registers are not accessible due to reset, thus they are actually not cleared at all. For WCN6855, it may cause target fail to initialize. This issue can be fixed by moving clear action ahead. In addition, on some specific platforms, need to add delay to wait those registers to become accessible. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210913180246.193388-3-jouni@codeaurora.org
2021-09-28ath11k: Drop MSDU with length error in DP rx pathBaochen Qiang
There are MSDUs whose length are invalid. For example, attackers may inject on purpose truncated A-MSDUs with invalid MSDU length. Such MSDUs are marked with an err bit set in rx attention tlvs, so we can check and drop them. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210913180246.193388-2-jouni@codeaurora.org
2021-09-28ath11k: copy cap info of 6G band under WMI_HOST_WLAN_5G_CAP for WCN6855Wen Gong
WCN6855 has 2 phys, one is 2G, another is 5G/6G, so it should copy the cap info of 6G band under the check of WMI_HOST_WLAN_5G_CAP as well as for the 5G band. Some chips like QCN9074 only have 6G, not have 2G and 5G, and this 6G capability is also under WMI_HOST_WLAN_5G_CAP, so this change will not disturb it. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210804181217.88751-4-jouni@codeaurora.org
2021-09-28ath11k: enable 6G channels for WCN6855Wen Gong
For some chips such as WCN6855, single_pdev_only is set in struct ath11k_hw_params which means ath11k calls ieee80211_register_hw() only once and create only one device interface, and that device interface supports all 2G/5G/6G channels. ath11k_mac_setup_channels_rates() sets up the channels and it is called for each device interface. It is called only once for single_pdev_only, and then set up all channels for 2G/5G/6G. The logic of ath11k_mac_setup_channels_rates() is not suitable for single_pdev_only, it leads to all 6G channels being disabled for the device interface which is single_pdev_only such as WCN6855. Add channel frequency checks for the 6G band and enable the 6G channels properly based on what is supported by the chip. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210804181217.88751-3-jouni@codeaurora.org
2021-09-28ath11k: re-enable ht_cap/vht_cap for 5G band for WCN6855Wen Gong
WCN6855 uses single_pdev_only, so it supports both the 5G and 6G bands in the same ath11k/pdev and it needs to enable ht_cap/vht_cap for the 5G band, otherwise it will downgrade to non-HT mode for the 5G band. Some chips like QCN9074 only support the 6G band, not the 5G band, and use the flag ar->supports_6ghz which is true to discard ht_cap/vht_cap. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210804181217.88751-2-jouni@codeaurora.org
2021-09-28ath11k: fix survey dump collection in 6 GHzPradeep Kumar Chitrapu
When ath11k receives survey request, choose the 6 GHz band when enabled. Without this, survey request does not include any 6 GHz band results, thereby causing auto channel selection to fail. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210722102054.43419-3-jouni@codeaurora.org
2021-09-28ath11k: fix packet drops due to incorrect 6 GHz freq value in rx statusPradeep Kumar Chitrapu
Frequency in rx status is being filled incorrectly in the 6 GHz band as channel number received is invalid in this case which is causing packet drops. So fix that. Fixes: 5dcf42f8b79d ("ath11k: Use freq instead of channel number in rx path") Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210722102054.43419-2-jouni@codeaurora.org
2021-09-28ath11k: add channel 2 into 6 GHz channel listPradeep Kumar Chitrapu
Add support for the 6 GHz channel 2 with center frequency 5935 MHz and operating class 136 per IEEE Std 802.11ax-2021, Table E-4. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210722102054.43419-1-jouni@codeaurora.org
generated by cgit (git 2.34.1) at 2025-09-23 11:47:30 +0000