summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-10-20mt76: mt7921: get rid of monitor_vifLorenzo Bianconi
Remove monitor_vif pointer from mt7921 since it is just a leftover of initial porting. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: connac: add support for limiting to maximum regulatory Tx powerYN Chen
Consider .max_reg_power in struct ieee80211_channel to limit the maximum power the wireless device allowed to transmit on the corresponding channel according to the regulatory domain. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: connac: fix GTK rekey offload failure on WPA mixed modeLeon Yen
Update the proper firmware programming sequence to fix GTK rekey offload failure on WPA mixed mode. In the mt76_connac_mcu_key_iter, gtk_tlv->proto should be only set up on pairwise key and gtk_tlk->group_cipher should be only set up on the group key. Otherwise, those parameters required by firmware would be set incorrectly to cause GTK rekey offload failure on WPA mixed mode and then disconnection follows. Fixes: b47e21e75c80 ("mt76: mt7615: add gtk rekey offload support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Leon Yen <Leon.Yen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: fix dma hang in rmmodDeren Wu
The dma would be broken after rmmod flow. There are two different cases causing this issue. 1. dma access without privilege. 2. hw access sequence borken by another context. This patch handle both cases to avoid hw crash. Fixes: 2b9ea5a8cf1bd ("mt76: mt7921: add mt7921_dma_cleanup in mt7921_unregister_device") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: add support for setting mcast rateRyder Lee
Mesh and ad-hoc interfaces allow users to set mcast rate through NL80211_ATTR_MCAST_RATE, so rework mt76_default_basic_rate() to adapt that. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: fix bit fields for HT rate idxShayne Chen
The bit fields of tx rate idx should be 6 bits, otherwise it might be incorrect in HT mode. For VHT/HE rates, only 4 bits are actually used by rate idx, the other 2 bits are used for other functions. Fixes: c31d94af1843 ("mt76: mt7915: fix tx rate related fields in tx descriptor") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: switch proper tx arbiter mode in testmodeShayne Chen
Switch proper tx arbiter mode during testmode tx to prevent from entering the flow of normal tx in FW. Also, testmode SU and MU tx need to use different arbiter mode. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: fix potential overflow of eeprom page indexShayne Chen
If total eeprom size is divisible by per-page size, the i in for loop will exceed max page index, which happens in our newer chipset. Fixes: 26f18380e6ca ("mt76: mt7915: add support for flash mode") Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: send EAPOL frames at lowest rateRyder Lee
The firmware rate control may choose the high rate for EAPOL frames, so checking IEEE80211_TX_CTL_USE_MINRATE to use the lowest TX rate. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: send EAPOL frames at lowest rateRyder Lee
The firmware rate control may choose the high rate for EAPOL frames, so checking IEEE80211_TX_CTL_USE_MINRATE to use the lowest TX rate. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: add control knobs for thermal throttlingRyder Lee
With this patch, users can set the trigger/restore temperature for thermal service according to their use cases. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: Add mt7922 supportDeren Wu
Add new chip mt7922 in mt7921 module with following items 1. new chip ID / fw bin name 2. is_mt7922() check chip type for different fw files 3. mt7921_get_data_mode() check security type of fw (backward compatible) Co-developed-by: Jimmy Hu <Jimmy.Hu@mediatek.com> Signed-off-by: Jimmy Hu <Jimmy.Hu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7615: fix skb use-after-free on mac resetFelix Fietkau
When clearing all existing pending tx slots, mt76_tx_complete_skb needs to be used to free the skbs, to ensure that they are cleared from the status list as well. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: Fix out of order process by invalid event pktDeren Wu
The acceptable event report should inlcude original CMD-ID. Otherwise, drop unexpected result from fw. Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support") Signed-off-by: Jimmy Hu <Jimmy.Hu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: fix mgmt frame using unexpected bitrateSean Wang
Fix the current driver mgmt frame is not respecting the basic rates field provided by the AP and then unconditionally is using the lowest (1 or 6 Mbps) rate. For example, if the AP only supported basic rate {24, 36, 48, 54} Mbps, mt7921 cannot send mgmt frame with the rate not in the group. So, instead, we pick up the lowest basic rate the AP can support to send. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Suggested-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: fix mgmt frame using unexpected bitrateSean Wang
Fix the current driver mgmt frame is not respecting the basic rates field provided by the AP and then unconditionally is using the lowest (1 or 6 Mbps) rate. For example, if the AP only supported basic rate {24, 36, 48, 54} Mbps, mt7921 cannot send mgmt frame with the rate not in the group. So, instead, we pick up the lowest basic rate the AP can support to send. Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: add mt76_default_basic_rate more devices can rely onSean Wang
add mt76_default_basic_rate to mt76 core more devices can rely on to send frames which require the rate in the basic rates. Suggested-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: introduce testmode supportLorenzo Bianconi
We add the testmode support to access the testmode feature provided by the MT7921 firmware. Tested-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: remove mt7915_sta_statsRyder Lee
mt7915_sta_stats is no longer needed after tx rate reworking. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: report tx rate directly from tx statusRyder Lee
Report tx rate from tx status packets instead of receving periodic mcu event. This improves flexibility, accuracy and AQL performance, and simplifies code flow for better readability. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: cleanup -Wunused-but-set-variableRyder Lee
Cleanup -Wunused-but-set-variable everywhere in driver. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: take RCU read lock when calling ieee80211_bss_get_elem()Ryder Lee
As ieee80211_bss_get_elem() derefences an RCU to return ie, both the call to this function and any operation on this variable need protection by the RCU read lock. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: fix an off-by-one bound checkRyder Lee
The bounds check on datalen is off-by-one, so fix it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: add .set_sar_specs supportYN Chen
add .set_sar_specs to allow configuring SAR power limitations on the frequency ranges from the userland. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: adapt new firmware to update BA winsize for Rx sessionBo Jiao
The newer firmware requires host driver to set BA winsize on both Tx/Rx sessions, so modify it for the long run. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: report HE MU radiotapRyder Lee
Report HE MU/BF radiotap. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt76x02: fix endianness warnings in mt76x02_mac.cLorenzo Bianconi
Fix the following sparse warning in mt76x02_mac_write_txwi and mt76x02_mac_tx_rate_val routines: drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:237:19: warning: restricted __le16 degrades to intege warning: cast from restricted __le16 drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:383:28: warning: incorrect type in assignment (different base types) expected restricted __le16 [usertype] rate got unsigned long Fixes: db9f11d3433f7 ("mt76: store wcid tx rate info in one u32 reduce locking") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: fix survey-dump reportingLorenzo Bianconi
Fix MIB tx-rx MIB counters for survey-dump reporting. Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: fix build error implicit enumeration conversionSean Wang
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:114:10: error: implicit conversion from enumeration type 'enum mt76_cipher_type' to different enumeration type 'enum mcu_cipher_type' [-Werror,-Wenum-conversion] return MT_CIPHER_NONE; ~~~~~~ ^~~~~~~~~~~~~~ drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:114:10: error: implicit conversion from enumeration type 'enum mt76_cipher_type' to different enumeration type 'enum mcu_cipher_type' [-Werror,-Wenum-conversion] return MT_CIPHER_NONE; ~~~~~~ ^~~~~~~~~~~~~~ Fixes: c368362c36d3 ("mt76: fix iv and CCMP header insertion") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: enable aspm by defaultSean Wang
mt7921 is mainly used in NB, CE and IoT application where battery life is much concerned so the patch enabled PCIe ASPM by default to shut off the clocks related PCIe as much as possible when MT7921 is either in suspend state or in runtime pm to lower power consumption. We still leave disable aspm as an option with module_param for users to disable ASPM if necessary. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: connac: fix mt76_connac_gtk_rekey_tlv usageLeon Yen
The mistaken structure is introduced since we added the GTK rekey offload to mt7663. The patch fixes mt76_connac_gtk_rekey_tlv structure according to the MT7663 and MT7921 firmware we have submitted into linux-firmware.git. Fixes: b47e21e75c80 ("mt76: mt7615: add gtk rekey offload support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Leon Yen <Leon.Yen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: fix calling mt76_wcid_alloc with incorrect parameterBo Jiao
It will cause maximum connectable STA to be one less when calling mt76_wcid_alloc with parameter MT7915_WTBL_STA - 1. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: fix info leak in mt7915_mcu_set_pre_cal()Dan Carpenter
Zero out all the unused members of "req" so that we don't disclose stack information. Fixes: 495184ac91bb ("mt76: mt7915: add support for applying pre-calibration data") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7615: fix endianness warning in mt7615_mac_write_txwiLorenzo Bianconi
Fix the following sparse warning in mt7615_mac_write_txwi routine: drivers/net/wireless/mediatek/mt76/mt7615/mac.c:758:17: warning: incorrect type in assignment expected restricted __le32 [usertype] got unsigned long Fixes: 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Fixes: d4bf77bd74930 ("mt76: mt7615: introduce mt7663u support to mt7615_write_txwi") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: fix endianness warning in mt7921_update_txsLorenzo Bianconi
Fix the following sparse warning in mt7921_update_txs routine: drivers/net/wireless/mediatek/mt76/mt7921/mac.c:752:31: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:752:31: warning: restricted __le32 degrades to integer Fixes: e5bca8c5d2cd3 ("mt76: mt7921: improve code readability for mt7921_update_txs") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: fix endianness warning in mt7915_mac_add_txs_skbLorenzo Bianconi
Fix the following sparse warning in mt7915_mac_add_txs_skb routine: drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1235:29: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1235:23: warning: restricted __le32 degrades to integer Fixes: 3de4cb1756565 ("mt76: mt7915: add support for tx status reporting") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: avoid unnecessary spin_lock/spin_unlock in ↵Lorenzo Bianconi
mt7921_mcu_tx_done_event Do not grab the spinlock in mt7921_mcu_tx_done_event routine if not necessary. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: fix endianness in mt7921_mcu_tx_done_eventLorenzo Bianconi
Fix endianness in mt7921_mcu_tx_done_event event reported by the firmware. Fixes: 3cce2b98e0241 ("mt76: mt7921: introduce mac tx done handling") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-19ice: fix an error code in ice_ena_vfs()Dan Carpenter
Return the error code if ice_eswitch_configure() fails. Don't return success. Fixes: 1c54c839935b ("ice: enable/disable switchdev when managing VFs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19ice: use devm_kcalloc() instead of devm_kzalloc()Gustavo A. R. Silva
Use 2-factor multiplication argument form devm_kcalloc() instead of devm_kzalloc(). Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19ice: Make use of the helper function devm_add_action_or_reset()Cai Huoqing
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19ice: Refactor PR ethtool opsWojciech Drewek
This patch improves a few things: - it fixes issue where ethtool -i reports that PR supports priv-flags and tests when in fact it does not support them - instead of using the same functions for both PF and PR ethtool ops, this patch introduces separate ops for both cases and internal functions with core logic. - prevent accessing VF VSI while VF is not ready by calling ice_check_vf_ready_for_cfg - all PR specific functions in ethtool.c were moved to one place in file - instead overwriting n_priv_flags in ice_repr_get_drvinfo, priv-flags code was moved from __ice_get_drvinfo to ice_get_drvinfo Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19ice: Manage act flags for switchdev offloadsWojciech Drewek
Currently it is not possible to set/unset lb_en and lan_en flags for advanced rules during their creation. Both flags are enabled by default. In case of switchdev offloads for egress traffic we need lb_en to be disabled. Because of that, we work around it by updating the rule immediately after its creation. This change allows us to set/unset those flags right away and it gets rid of old workaround as well. Using ice_adv_rule_flags_info structure we can pass info about flags we want to be set for a given advanced rule. Flags are stored in flags_info.act. Values from act would be used only if act_valid was set to true, otherwise default values would be used. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19ice: Forbid trusted VFs in switchdev modeWojciech Drewek
Merge issues caused the check for switchdev mode has been inserted in wrong place. It should be in ice_set_vf_trust not in ice_set_vf_mac. Trusted VFs are forbidden in switchdev mode because they should be configured only from the host side. Fixes: 1c54c839935b ("ice: enable/disable switchdev when managing VFs") Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19ice: fix software generating extra interruptsJesse Brandeburg
The driver tried to work around missing completion events that occurred while interrupts are disabled, by triggering a software interrupt whenever we exit polling (but we had to have polled at least once). This was causing a *lot* of extra interrupts for some workloads like NVMe over TCP, which resulted in regressions in performance. It was also visible when polling didn't prevent interrupts when busy_poll was enabled. Fix the extra interrupts by utilizing our previously unused 3rd ITR (interrupt throttle) index and set it to 20K interrupts per second, and then trigger a software interrupt within that rate limit. While here, slightly refactor the code to avoid an overwrite of a local variable in the case of wb_en = true. Fixes: b7306b42beaf ("ice: manage interrupts during poll exit") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19ice: fix rate limit update after coalesce changeJesse Brandeburg
If the adaptive settings are changed with ethtool -C ethx adaptive-rx off adaptive-tx off then the interrupt rate limit should be maintained as a user set value, but only if BOTH adaptive settings are off. Fix a bug where the rate limit that was being used in adaptive mode was staying set in the register but was not reported correctly by ethtool -c ethx. Due to long lines include a small refactor of q_vector variable. Fixes: b8b4772377dd ("ice: refactor interrupt moderation writes") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19ice: update dim usage and moderationJesse Brandeburg
The driver was having trouble with unreliable latency when doing single threaded ping-pong tests. This was root caused to the DIM algorithm landing on a too slow interrupt value, which caused high latency, and it was especially present when queues were being switched frequently by the scheduler as happens on default setups today. In attempting to improve this, we allow the upper rate limit for interrupts to move to rate limit of 4 microseconds as a max, which means that no vector can generate more than 250,000 interrupts per second. The old config was up to 100,000. The driver previously tried to program the rate limit too frequently and if the receive and transmit side were both active on the same vector, the INTRL would be set incorrectly, and this change fixes that issue as a side effect of the redesign. This driver will operate from now on with a slightly changed DIM table with more emphasis towards latency sensitivity by having more table entries with lower latency than with high latency (high being >= 64 microseconds). The driver also resets the DIM algorithm state with a new stats set when there is no work done and the data becomes stale (older than 1 second), for the respective receive or transmit portion of the interrupt. Add a new helper for setting rate limit, which will be used more in a followup patch. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19Merge brank 'mlx5_mkey' into rdma.git for-nextJason Gunthorpe
A small series to clean up the mlx5 mkey code across the mlx5_core and InfiniBand. * branch 'mlx5_mkey': RDMA/mlx5: Attach ndescs to mlx5_ib_mkey RDMA/mlx5: Move struct mlx5_core_mkey to mlx5_ib RDMA/mlx5: Replace struct mlx5_core_mkey by u32 key RDMA/mlx5: Remove pd from struct mlx5_core_mkey RDMA/mlx5: Remove size from struct mlx5_core_mkey RDMA/mlx5: Remove iova from struct mlx5_core_mkey Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-19ice: Add support for VF rate limitingBrett Creeley
Implement ndo_set_vf_rate to support setting of min_tx_rate and max_tx_rate; set the appropriate bandwidth in the scheduler for the node representing the specified VF VSI. Co-developed-by: Tarun Singh <tarun.k.singh@intel.com> Signed-off-by: Tarun Singh <tarun.k.singh@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19net: ethernet: ixp4xx: Make use of dma_pool_zalloc() instead of ↵Cai Huoqing
dma_pool_alloc/memset() Replacing dma_pool_alloc/memset() with dma_pool_zalloc() to simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 11:08:03 +0000