summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-10-18can: mcp251x: optimize 2515, rx int gets cleared automaticallyMarc Kleine-Budde
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: define helper functions mcp251x_is_2510, mcp251x_is_2515Marc Kleine-Budde
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: Don't use pdata->model for chip selection anymoreMarc Kleine-Budde
Since commit e446630c960946b5c1762e4eadb618becef599e7, i.e. v2.6.35-rc1, the mcp251x chip model can be selected via the modalias member in the struct spi_board_info. The driver stores the actual model in the struct mcp251x_platform_data. From the driver point of view the platform_data should be read only. Since all in-tree users of the mcp251x have already been converted to the modalias method, this patch moves the "model" member from the struct mcp251x_platform_data to the driver's private data structure. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Christian Pellegrin <chripell@fsfe.org> Cc: Marc Zyngier <maz@misterjones.org>
2010-10-18can: mcp251x: write intf only when neededMarc Kleine-Budde
This patch introduces a variable "clear_intf" that hold the bits that should be cleared. Only read-modify-write register if "clear_intf" is set. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: read-modify-write eflag only when neededSascha Hauer
Use read-modify-write instead of a simple write to change the register contents, to close existing the race window between the original manual read and write. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: allow to read two registers in one spi transferSascha Hauer
This patch bases on work done earlier by David Jander. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: David Jander <david@protonic.nl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: increase rx_errors on overflow, not only rx_over_errorsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: fix NOHZ local_softirq_pending 08 warningMarc Kleine-Budde
This patch replaces netif_rx() with netif_rx_ni() which has to be used from the threaded interrupt i.e. process context context. Thanks to Christian Pellegrin for pointing at the right fix: 481a8199142c050b72bff8a1956a49fd0a75bbe0 by Oliver Hartkopp. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18Update broken web addresses in the kernel.Justin P. Mattock
The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-18gianfar: fix double lock typoDan Carpenter
This should be a _restore() instead of a _save(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18ns83820: spin_lock_irq() => spin_lock()Dan Carpenter
This is essentially cosmetic. At this point the IRQs are already disabled because we called spin_lock_irq(&dev->rx_info.lock). The real bug here was fixed back in 2006 in 3a10ccebe: "[PATCH] lock validator: fix ns83820.c irq-flags bug". Prior to that patch, it was a "spin_lock_irq is not nestable" type bug. The 2006 patch changes the unlock to not re-enable IRQs, which eliminates the potential deadlock. But this bit was missed. We should change the lock function as well so it balances nicely. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Update version to 3.115Matt Carlson
This patch updates the tg3 version to 3.115. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Report invalid link from tg3_get_settings()Matt Carlson
Currently the tg3 driver leaves the speed and duplex fields uninitialized in tg3_get_settings() if the device is not up. This can lead to some strange deductions in certain versions of ethtool. When the device is up and the link is down, the driver reports SPEED_INVALID and DUPLEX_INVALID for these fields. This patch makes the presentation consistent by returning SPEED_INVALID and DUPLEX_INVALID when the device has not been brought up as well. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Don't allocate jumbo ring for 5780 class devsMatt Carlson
The 5714, 5715, and 5780 devices do not have a separate rx jumbo producer ring. This patch changes the code so that resources are not allocated for it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Cleanup tg3_alloc_rx_skb()Matt Carlson
src_map is no longer used in tg3_alloc_rx_skb(). Remove it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Add EEE supportMatt Carlson
This patch adds Energy Efficient Ethernet (EEE) support for the 5718 device ID and the 57765 B0 asic revision. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Add clause 45 register accessor methodsMatt Carlson
This patch adds clause 45 register access methods. They will be used in the following patch. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Disable unused transmit ringsMatt Carlson
This patch allows the driver to disable the additional transmit rings available on the 5717 and 5719 devices. This is not strictly necessary, but is done anyways for correctness. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Add support for selfboot format 1 v6Matt Carlson
5718 B0 and 5719 devices will use a new selfboot firmware format. This patch adds code to detect the new format so that bootcode versions get reported correctly. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17drivers/net/pch_gbe: Use DEFINE_PCI_DEVICE_TABLEJoe Perches
Use the standard macro to put this table in __devinitconst. Compiled, untested. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17stmmac: remove ifdef NETIF_F_TSO from stmmac_ethtool.cGiuseppe Cavallaro
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reported-by: Armando Visconti <armando.visconti@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17niu: introduce temp variables to avoid sparse warnings when swapping in-situHarvey Harrison
Suppress a large block of warnings like: drivers/net/niu.c:7094:38: warning: incorrect type in assignment (different base types) drivers/net/niu.c:7094:38: expected restricted __be32 [usertype] ip4src drivers/net/niu.c:7094:38: got unsigned long long drivers/net/niu.c:7104:17: warning: cast from restricted __be32 ... Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16net: move MII outside of NET_ETHERNET, fix kconfig warningRandy Dunlap
We have USB, PCMCIA, and gigabit ethernet drivers that select MII even though NET_ETHERNET is not enabled, so make MII not be dependent on NET_ETHERNET. It is still dependent on NET and NETDEVICES. Fixes kconfig unmet dependency warning (shortened, was very long string): warning: (ARM_AT91_ETHER && NETDEVICES && NET_ETHERNET && ARM && ARCH_AT91RM9200 || ARM_KS8695_ETHER && NETDEVICES && NET_ETHERNET && ARM && ARCH_KS8695 || ... || IP1000 && NETDEVICES && NETDEV_1000 && PCI && EXPERIMENTAL || HAMACHI && NETDEVICES && NETDEV_1000 && PCI || R8169 && NETDEVICES && NETDEV_1000 && PCI || SIS190 && NETDEVICES && NETDEV_1000 && PCI || VIA_VELOCITY && NETDEVICES && NETDEV_1000 && PCI || ATL1 && NETDEVICES && NETDEV_1000 && PCI || ATL1E && NETDEVICES && NETDEV_1000 && PCI && EXPERIMENTAL || ATL1C && NETDEVICES && NETDEV_1000 && PCI && EXPERIMENTAL || JME && NETDEVICES && NETDEV_1000 && PCI || STMMAC_ETH && NETDEV_1000 && NETDEVICES && HAS_IOMEM || USB_PEGASUS && NETDEVICES && USB && NET || USB_RTL8150 && NETDEVICES && USB && NET && EXPERIMENTAL || USB_USBNET && NETDEVICES && USB && NET || PCMCIA_SMC91C92 && NETDEVICES && NET_PCMCIA && PCMCIA) selects MII which has unmet direct dependencies (NETDEVICES && NET_ETHERNET) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> [2006-NOV-30] Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16stmmac: make function tables conststephen hemminger
These tables only contain function pointers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16stmmac: make ethtool functions localstephen hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16via-velocity: forced 1000 Mbps mode support.françois romieu
Full duplex only. Half duplex 1000 Mbps is not supported. Signed-off-by: David Lv <DavidLv@viatech.com.cn> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Seguier Regis <rseguier@e-teleport.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16sundance: Add initial ethtool stats supportDenis Kirjanov
Add ethtool stats support. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16pch_gbe: fix if condition in set_settings()Dan Carpenter
There were no curly braces in this if condition so it always enabled full duplex. And ecmd->speed is an unsigned short so it is never equal to -1. The effect is that mii_ethtool_sset() fails with -EINVAL and an error is printed to dmesg. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16dnet: mark methods static and annotate for correct endiannessHarvey Harrison
Their doesn't appear to be bugs with the endianness handling here, just get the annotations right to keep sparse happy. Suppresses the following sparse warnings: drivers/net/dnet.c:30:5: warning: symbol 'dnet_readw_mac' was not declared. Should it be static? drivers/net/dnet.c:49:6: warning: symbol 'dnet_writew_mac' was not declared. Should it be static? drivers/net/dnet.c:364:5: warning: symbol 'dnet_phy_marvell_fixup' was not declared. Should it be static? drivers/net/dnet.c:66:13: warning: incorrect type in assignment (different base types) drivers/net/dnet.c:66:13: expected unsigned short [unsigned] [usertype] tmp drivers/net/dnet.c:66:13: got restricted __be16 [usertype] <noident> drivers/net/dnet.c:68:13: warning: incorrect type in assignment (different base types) drivers/net/dnet.c:68:13: expected unsigned short [unsigned] [usertype] tmp drivers/net/dnet.c:68:13: got restricted __be16 [usertype] <noident> drivers/net/dnet.c:70:13: warning: incorrect type in assignment (different base types) drivers/net/dnet.c:70:13: expected unsigned short [unsigned] [usertype] tmp drivers/net/dnet.c:70:13: got restricted __be16 [usertype] <noident> drivers/net/dnet.c:92:27: warning: cast to restricted __be16 drivers/net/dnet.c:94:33: warning: cast to restricted __be16 drivers/net/dnet.c:96:33: warning: cast to restricted __be16 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16cxgb4vf: make single bit signed bitfields unsignedHarvey Harrison
Single bit signed bitfields don't make a lot of sense, noticed by sparse: drivers/net/cxgb4vf/t4vf_common.h:135:31: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:136:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:137:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:138:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:139:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:140:31: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:141:31: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:142:35: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:143:35: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:154:27: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:155:26: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:156:27: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:157:26: error: dubious one-bit signed bitfield Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16r8169: use 50% less ram for RX ringEric Dumazet
Using standard skb allocations in r8169 leads to order-3 allocations (if PAGE_SIZE=4096), because NIC needs 16383 bytes, and skb overhead makes this bigger than 16384 -> 32768 bytes per "skb" Using kmalloc() permits to reduce memory requirements of one r8169 nic by 4Mbytes. (256 frames * 16Kbytes). This is fine since a hardware bug requires us to copy incoming frames, so we build real skb when doing this copy. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2010-10-15drivers/net/wireless/p54/eeprom.c: Return -ENOMEM on memory allocation failureJulia Lawall
In this code, 0 is returned on memory allocation failure, even though other failures return -ENOMEM or other similar values. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ret; expression x,e1,e2,e3; @@ ret = 0 ... when != ret = e1 *x = \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != ret = e2 if (x == NULL) { ... when != ret = e3 return ret; } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: <stable@kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k: Null out references to stale pointers.Ben Greear
This doesn't fix any problem that I'm aware of, but should make it harder to add use-after-free type bugs in the future. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k: Remove bf_dmacontext.Ben Greear
The bf_dmacontext seems to be totally useless and duplicated by bf_buf_addr. Remove it entirely, use bf_buf_addr in its place. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15b43: N-PHY: put 2056-radio's specific code in separated fileRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k_hw: remove AR9003 2.0 supportLuis R. Rodriguez
These chipsets will not hit the market, all customers will be on >= AR9003 2.2. This shaves down the ath9k_hw size by 24161 bytes (24 KB) on my system. Before: $ size drivers/net/wireless/ath/ath9k/ath9k_hw.ko text data bss dec hex filename 292328 616 1824 294768 47f70 drivers/net/wireless/ath/ath9k/ath9k_hw.ko $ du -b drivers/net/wireless/ath/ath9k/ath9k_hw.ko 5987825 drivers/net/wireless/ath/ath9k/ath9k_hw.ko After: $ size drivers/net/wireless/ath/ath9k/ath9k_hw.ko text data bss dec hex filename 277192 616 1824 279632 44450 drivers/net/wireless/ath/ath9k/ath9k_hw.ko $ du -b drivers/net/wireless/ath/ath9k/ath9k_hw.ko 5963664 drivers/net/wireless/ath/ath9k/ath9k_hw.ko Cc: Yixiang Li <yixiang.li@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15b43: N-PHY: put radio-specific code in separated fileRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15b43: N-PHY: fix typo: read table when caching IQ LO calibration (do not write)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15b43: N-PHY: replace N-specific radio_chanspec with common codeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k_htc: set probe request rx filterRajkumar Manoharan
This patch enables to receive probe request frames on p2p client mode. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15libertas: Communicate USB transfer errorsPaul Fox
The return code was being overwritten with -1. Useful for debugging. Signed-off-by: Paul Fox <pgf@laptop.org> Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k_hw: remove enum wireless_mode and its usersFelix Fietkau
The wireless mode bitfield was only used to detect 2.4 and 5 GHz support, which can be simplified by using ATH9K_HW_CAP_* capabilities. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k: remove sc->cur_rate_table and sc->cur_rate_modeFelix Fietkau
Set the rate table in the rc module properly based on band and HT capabilities instead, which was already partially done, but not for every mode. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k: make rate control debugfs stats per stationFelix Fietkau
Move them to the same debugfs file that the other rc modules use. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k: add missing locking around ath9k_hw_proc_mib_eventFelix Fietkau
ath9k_hw_proc_mib_event updates the cycle counters, so it common->cc_lock must be acquired. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k_hw: fix PHY counter overflow handling in ANI v1Felix Fietkau
PHY counter overflows need to be checked for the old ANI version, because of its use of interrupt based counter overflow reports when the counters exceed the configured thresholds. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k_hw: fix division by zero in the ANI monitor codeFelix Fietkau
The commit "ath9k_hw: remove code duplication in phy error counter handling" split off some duplicate code into a separate function, but did not have a return code for aborting ANI processing based on counter values. This introduced a divide by zero issue. This patch adds the missing return code check in ath9k_hw_ani_monitor Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k: do not track cycle counter updates in powersave modeFelix Fietkau
While the chip is in powersave mode, the cycle counter updates do not contain useful values. While the chip is in full sleep, the rx_clear signal stays high, indicating a busy medium. To ensure sane values, update cycle counters before going into powersave, and clear them right after switching back to awake. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ixgbe: DCB: remove DCB check configJohn Fastabend
Remove a DCB check config from DCB configuration we continue to configure DCB even if it fails so don't even bother to check. Plus user space (lldpad) checks this before programming the hw anyways. Worse case is we program some values into the hw that don't make total sense resulting in incorrect bandwidth allocation. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 23:27:59 +0000