summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-10-11rt2x00: Simplify Queue function argumentsIvo van Doorn
A lot of functions accept a struct rt2x00_dev combined with either a struct queue_entry or struct data_queue argument. This can be simplified by only passing on the queue/entry argument. In cases where rt2x00_dev and a sk_buff are send together, we can send the queue_entry instead. rt2x00usb_alloc_urb and rt2x00usb_free_urb have a bit of vague naming. Instead they allocate all the data which belongs to a rt2x00 data queue entry. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11WIRELESS: at76c50x, remove unneeded NULL checkJiri Slaby
Stanse found that urb cannot be NULL in at76_rx_tasklet because it is dereferenced earlier, so remove the unneeded check. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11b43: N-PHY: prepare for rev3+ channel tablesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11b43: N-PHY: fix logic in band switchingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11b43: N-PHY: store info about current channel's typeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11b43: N-PHY: grab more info about new channelRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath9k: built-in rate control A-MPDU fixBjörn Smedman
This patch attempts to ensure that ath9k's built-in rate control algorithm does not rely on the value of the ampdu_len and ampdu_ack_len tx status fields unless the IEEE80211_TX_STAT_AMPDU flag is set. This patch has not been tested. Cc: <stable@kernel.org> Signed-off-by: Björn Smedman <bjorn.smedman@venatech.se> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath9k: A-MPDU rate control info fixBjörn Smedman
This patch fixes the following problems with the rate control feedback generated by ath9k for A-MPDU frames: 1. Rate control feedback is carried on the first frame of an aggregate that is either ACKed, or has execeeded the software retry count and is considered failed. However, ath9k would incorrectly assume the aggregate had the length 1 if one of these conditions did not apply to the first frame of the aggregate, but instead a later frame. This fix therefor copies the bf_nframes field of the buffer in the same manner as the rates field of the tx status. 2. Sometimes the ampdu_len and ampdu_ack_len fields of the tx status was left uninitialized eventhough the IEEE80211_TX_STAT_AMPDU flag was set. This is now avoid by setting flag and fields in the same place. 3. Even if a frame has been selected for aggregation by mac80211 and marked with the IEEE80211_TX_CTL_AMPDU flag it can sometimes happen that ath9k transmits the frame without aggregation. In these cases the ampdu_ack_len field could be incorrectly computed because the nbad parameter to ath_tx_rc_status was incorrect. Cc: <stable@kernel.org> Signed-off-by: Björn Smedman <bjorn.smedman@venatech.se> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11wl1251: move to it's own directoryKalle Valo
wl1271 driver is under heavy development but on the other hand the older wl1251 driver is currently considered more as a legacy driver. To make it easier to develop wl1271 features move wl1251 to it's own directory, drivers/net/wireless/wl1251. There are no functional changes, only moving of files. One regression is that Kconfig won't be updated automatically and user needs to enable wl1251 manually with an older config file. Signed-off-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11wl1251: create a copy of wl12xx_80211.h for wl1251Kalle Valo
In preparation of moving wl1251 out from drivers/net/wireless/wl12xx create a separate copy of wl12xx_80211.h. This file should not even exist, we should instead use generic ieee80211 definitions. This will be fixed in the future so that the file can be removed. Signed-off-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11carl9170: A-MPDU frame type filterChristian Lamparter
In the past, carl9170 has been plagued by mysterious ghosts. e.g.: wlan4: deauthenticated from 02:04:d8:3c:ac:c1 (Reason: 0) Apparently, the AP sent us a bogus deauthentication notification. But upon closer inspection the "management frame" turned out to be a corrupted scrap of an unsuccessful A-MPDU. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11carl9170: remove stale rx error pathChristian Lamparter
The total/fatal error bit was erroneously prefixed with AR9170_RX_ERROR instead of AR9170_RX_STATUS. Luckily, the hardware specification confirmed that the 0x80 flag will never be set for mac->error. So, it was always just a dead branch. This patch also imports the latest version of shared wlan.h header from the firmware git. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11carl9170: common error path for bad framesChristian Lamparter
This patch replaces several identical frame drop paths with a single shared rx frame error handler. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11rt2x00: Fix tx status handling in rt2800pciHelmut Schaa
The patches "rt2x00: Improve TX status entry validation" and "rt2x00: rework tx status handling in rt2800pci" together were causing problems with tx status processing in rt2800pci: phy1 -> rt2800pci_txdone: Warning - Got TX status for an empty queue 3, dropping phy1 -> rt2800pci_txdone: Warning - Got TX status for an unavailable queue 7, dropping Fix this by using the correct field definition for getting the QID out of the tx status report. Reported-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11rt2x00: Remove superfluous initialization of qidxHelmut Schaa
There is no need to initialize qidx to zero as it will ever be overwritten by the correct value. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11rt2x00: Use unlikely for error case in rt2x00queue_write_tx_frameHelmut Schaa
This is an error condition that is not supposed to happen. Hence, it is safe to add unlikely to this check. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11rt2x00: Use proper type for rxwi_w2 in rt2800_agc_to_rssiHelmut Schaa
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11rt2x00: Optimize unmapping of skbsHelmut Schaa
Since no skb will be mapped for RX and TX at the same time we can simply shortcut the check for SKBDESC_DMA_MAPPED_TX. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11rt2x00: Shortcut link state updates when not operating as STAHelmut Schaa
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath9k: implement channel utilization stats for surveyFelix Fietkau
Results for the active channel are updated whenever a new survey dump is requested, the old data is kept to allow multiple processes to make their own channel utilization averages. All other channels only contain the data for the last time that the hardware was on the channel, i.e. the last scan result or other off-channel activity. Running a background scan does not clear the data for the active channel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath9k: add compile time checking for the size of the channel listFelix Fietkau
This prevents random memory corruption if the number of channels ever gets changed without an update to the internal channel array size. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath5k: use the common cycle counter / listen time implementationFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath9k_hw: move the cycle counter tracking to athFelix Fietkau
Instead of keeping track of wraparound, clear the counters on every access and keep separate deltas for ANI and later survey use. Also moves the function for calculating the 'listen time' for ANI Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath5k: store the clock rate in common data on channel changesFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath9k_hw: store the clock rate in common data on channel changesFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath5k: Adjust opmode when interfaces are removed.Ben Greear
Otherwise, if there is an AP and a STATION, and AP is removed, the NIC will not revert back to STATION mode. Reported-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath5k: Print out opmode in debugfs.Ben Greear
Helps debug multi-VIF scenarios. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11Merge branch 'wireless-next' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2010-10-11NET: pch, fix use after freeJiri Slaby
Stanse found that pch_gbe_xmit_frame uses skb after it is freed. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Masayuki Ohtake <masa-korg@dsn.okisemi.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11NET: wimax, fix use after freeJiri Slaby
Stanse found that i2400m_rx frees skb, but still uses skb->len even though it has skb_len defined. So use skb_len properly in the code. And also define it unsinged int rather than size_t to solve compilation warnings. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: linux-wimax@intel.com Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-10net/fec: carrier off initially to avoid root mount failureOskar Schirmer
with hardware slow in negotiation, the system did freeze while trying to mount root on nfs at boot time. the link state has not been initialised so network stack tried to start transmission right away. this caused instant retries, as the driver solely stated business upon link down, rendering the system unusable. notify carrier off initially to prevent transmission until phylib will report link up. Signed-off-by: Oskar Schirmer <oskar@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11irda: Test index before read in stir421x_patch_device()Roel Kluin
Test whether index exceeds fw->size before reading the element Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
2010-10-09sundance: get_stats proper lockingEric Dumazet
sundance get_stats() should not be run concurrently, add a lock to avoid potential losses. Note: Remove unused rx_lock field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09net/tg3: simplify conditionalNicolas Kaiser
Simplify: ((a && !b) || (!a && b)) => (a != b) Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09ehea: simplify conditionalNicolas Kaiser
Simplify: ((a && b) || (!a && !b)) => (a == b) Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Acked-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09r8169: use device model DMA APIStanislaw Gruszka
Use DMA API as PCI equivalents will be deprecated. This change also allow to allocate with GFP_KERNEL where possible. Tested-by: Neal Becker <ndbecker2@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09r8169: allocate with GFP_KERNEL flag when able to sleepStanislaw Gruszka
We have fedora bug report where driver fail to initialize after suspend/resume because of memory allocation errors: https://bugzilla.redhat.com/show_bug.cgi?id=629158 To fix use GFP_KERNEL allocation where possible. Tested-by: Neal Becker <ndbecker2@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: update driver version 5.0.11Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: change all P3 references to P3PSritej Velaga
This patch just rename all P3 #define to P3P. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: fix promiscous mode for VFRajesh Borundia
o Allow promiscous mode setting for VF's depending upon the configuration. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: fix board descriptionSritej Velaga
Remove "Flex-10" from board description. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: remove private LRO flagAmit Kumar Salecha
LRO was not getting enable after interface down/up. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: support quiescent modeAmit Kumar Salecha
Put device in quiescent mode during internal loopback test. Before running test, set state to NEED_QUISCENT. After getting ack from all function, change state to QUISCENT and perform test. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: driver private workqueueAmit Kumar Salecha
Currently fw recovery usage global workqueue. As same workqueue used by kernel for ethtool and etc., supporting quiescent mode is not possible, without driver private workqueue. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-10-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ipw2x00/ipw2200.c
2010-10-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-10-08sfc: Don't try to set filters with search depths we know won't workBen Hutchings
The filter engine will time-out and ignore filters beyond 200-something hops. We also need to avoid infinite loops in efx_filter_search() when the table is full. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08wl1271: sdio: add suspend/resume supportOhad Ben-Cohen
Add required suspend/resume support to prevent the SDIO core from removing our card completely during system suspend. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-08wl1271: sdio: enable runtime PMOhad Ben-Cohen
Enable runtime PM for the wl1271 SDIO device. We request power whenever the WLAN interface is brought up, and release it after the WLAN interface is taken down. As a result, power is released immediately after probe returns, since at that point power has not been explicitly requested yet (i.e. the WLAN interface is still down). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Tested-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
generated by cgit (git 2.34.1) at 2025-09-14 16:54:16 +0000