summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-10-14net: macvlan: change schedule system_wq to system_unbound_wqzhangxiangqian
For FT2000+/64 devices, when four virtual machines share the same physical network interface, DROP will occur due to the single core CPU performance problem. ip_check_defrag and macvlan_process_broadcast is on the same CPU. When the MACVLAN PORT increases, the CPU usage reaches more than 90%. bc_queue > bc_queue_len_used (default 1000), causing DROP. Signed-off-by: zhangxiangqian <zhangxiangqian@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-14i40e: Fix DMA mappings leakJan Sokolowski
During reallocation of RX buffers, new DMA mappings are created for those buffers. steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA. Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler. Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel) Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-14net: dsa: qca8k: fix ethtool autocast mib for big-endian systemsChristian Marangi
The switch sends autocast mib in little-endian. This is problematic for big-endian system as the values needs to be converted. Fix this by converting each mib value to cpu byte order. Fixes: 5c957c7ca78c ("net: dsa: qca8k: add support for mib autocast in Ethernet packet") Tested-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-14net: dsa: qca8k: fix inband mgmt for big-endian systemsChristian Marangi
The header and the data of the skb for the inband mgmt requires to be in little-endian. This is problematic for big-endian system as the mgmt header is written in the cpu byte order. Fix this by converting each value for the mgmt header and data to little-endian, and convert to cpu byte order the mgmt header and data sent by the switch. Fixes: 5950c7c0a68c ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet") Tested-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-13Merge tag 'net-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and wifi. Current release - regressions: - Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs", it may cause crashes when the qdisc is reconfigured - inet: ping: fix splat due to packet allocation refactoring in inet - tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF due to races when per-netns hash table is used Current release - new code bugs: - eth: adin1110: check in netdev_event that netdev belongs to driver - fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co. Previous releases - regressions: - ipv4: handle attempt to delete multipath route when fib_info contains an nh reference, avoid oob access - wifi: fix handful of bugs in the new Multi-BSSID code - wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer, fix checksum offload - wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases) - wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rx Previous releases - always broken: - ieee802154: don't warn zero-sized raw_sendmsg() - ipv6: ping: fix wrong checksum for large frames - mctp: prevent double key removal and unref - tcp/udp: fix memory leaks and races around IPV6_ADDRFORM - hv_netvsc: fix race between VF offering and VF association message Misc: - remove -Warray-bounds silencing in the drivers, compilers fixed" * tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) sunhme: fix an IS_ERR() vs NULL check in probe net: marvell: prestera: fix a couple NULL vs IS_ERR() checks kcm: avoid potential race in kcm_tx_work tcp: Clean up kernel listener's reqsk in inet_twsk_purge() net: phy: micrel: Fixes FIELD_GET assertion openvswitch: add nf_ct_is_confirmed check before assigning the helper tcp: Fix data races around icsk->icsk_af_ops. ipv6: Fix data races around sk->sk_prot. tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct(). udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM). tcp/udp: Fix memory leak in ipv6_renew_options(). mctp: prevent double key removal and unref selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1 netfilter: rpfilter/fib: Populate flowic_l3mdev field selftests: netfilter: Test reverse path filtering net/mlx5: Make ASO poll CQ usable in atomic context tcp: cdg: allow tcp_cdg_release() to be called multiple times inet: ping: fix recent breakage ipv6: ping: fix wrong checksum for large frames net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports ...
2022-10-13sunhme: fix an IS_ERR() vs NULL check in probeDan Carpenter
The devm_request_region() function does not return error pointers, it returns NULL on error. Fixes: 914d9b2711dd ("sunhme: switch to devres") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Link: https://lore.kernel.org/r/Y0bWzJL8JknX8MUf@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-13net: marvell: prestera: fix a couple NULL vs IS_ERR() checksDan Carpenter
The __prestera_nexthop_group_create() function returns NULL on error and the prestera_nexthop_group_get() returns error pointers. Fix these two checks. Fixes: 0a23ae237171 ("net: marvell: prestera: Add router nexthops ABI") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Y0bWq+7DoKK465z8@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-13Merge tag 'wireless-2022-10-13' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== More wireless fixes for 6.1 This has only the fixes for the scan parsing issues. * tag 'wireless-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: cfg80211: update hidden BSSes to avoid WARN_ON wifi: mac80211: fix crash in beacon protection for P2P-device wifi: mac80211_hwsim: avoid mac80211 warning on bad rate wifi: cfg80211: avoid nontransmitted BSS list corruption wifi: cfg80211: fix BSS refcounting bugs wifi: cfg80211: ensure length byte is present before access wifi: mac80211: fix MBSSID parsing use-after-free wifi: cfg80211/mac80211: reject bad MBSSID elements wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans() ==================== Link: https://lore.kernel.org/r/20221013100522.46346-1-johannes@sipsolutions.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-13Merge branch 'cve-fixes-2022-10-13'Johannes Berg
Pull in the fixes for various scan parsing bugs found by Sönke Huster by fuzzing.
2022-10-13wifi: ath10k: Check return value of ath10k_get_arvif() in ↵Peter Kosyh
ath10k_wmi_event_tdls_peer() Return value of a function ath10k_get_arvif() is dereferenced without checking for null in ath10k_wmi_event_tdls_peer(), but it is usually checked for this function. Make ath10k_wmi_event_tdls_peer() do check retval of ath10k_get_arvif(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Peter Kosyh <pkosyh@yandex.ru> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221003091217.322598-1-pkosyh@yandex.ru
2022-10-13wifi: ath11k: Fix firmware crash on vdev delete race conditionSowmiya Sree Elavalagan
Current code does not wait for vdev delete completion on vdev create failures and tries to send another vdev create followed by vdev set param to firmware with same vdev id. This causes firmware crash. Fix this crash by waiting for vdev delete completion on vdev create failures. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00905-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221011095346.3901-1-quic_ssreeela@quicinc.com
2022-10-12net: phy: micrel: Fixes FIELD_GET assertionDivya Koppera
FIELD_GET() must only be used with a mask that is a compile-time constant. Mark the functions as __always_inline to avoid the problem. Fixes: 21b688dabecb6a ("net: phy: micrel: Cable Diag feature for lan8814 phy") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com> Link: https://lore.kernel.org/r/20221011095437.12580-1-Divya.Koppera@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-12ieee802154: atusb: add support for trac featureAlexander Aring
This patch adds support for reading the trac register if atusb firmware reports tx done. There is currently a feature to compare a sequence number, if the payload is 1 it tells the driver only the sequence number is available if it's two there is additional the trac status register as payload. Currently the atusb_in_good() function determines if it's a tx done or rx done if according the payload length. This patch is doing the same and assumes this behaviour. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220905203412.1322947-10-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-10-12mac802154: Drop IEEE802154_HW_RX_DROP_BAD_CKSUMMiquel Raynal
This IEEE802154_HW_RX_DROP_BAD_CKSUM flag was only used by hwsim to reflect the fact that it would not validate the checksum (FCS). So this was only useful while the only filtering level hwsim was capable of was "NONE". Now that the driver has been improved we no longer need this flag. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20221007085310.503366-7-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-10-12ieee802154: hwsim: Implement address filteringMiquel Raynal
We have access to the address filters being theoretically applied, we also have access to the actual filtering level applied, so let's add a proper frame validation sequence in hwsim. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20221007085310.503366-6-miquel.raynal@bootlin.com [stefan@datenfreihafen.org: fixup some checkpatch warnings] Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-10-12ieee802154: hwsim: Record the address filter valuesMiquel Raynal
As a first step, introduce a basic implementation for the ->set_hw_addr_filt() hook. In a second step, the values recorded here will be used to perform proper filtering during reception. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20221007085310.503366-5-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-10-12net: ieee802154: mcr20a: Switch to use dev_err_probe() helperYang Yingliang
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220915071258.678536-1-yangyingliang@huawei.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-10-12net/mlx5: Make ASO poll CQ usable in atomic contextLeon Romanovsky
Poll CQ functions shouldn't sleep as they are called in atomic context. The following splat appears once the mlx5_aso_poll_cq() is used in such flow. BUG: scheduling while atomic: swapper/17/0/0x00000100 Modules linked in: sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core fuse [last unloaded: mlx5_core] CPU: 17 PID: 0 Comm: swapper/17 Tainted: G W 6.0.0-rc2+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 __schedule_bug.cold+0x47/0x53 __schedule+0x4b6/0x670 ? hrtimer_start_range_ns+0x28d/0x360 schedule+0x50/0x90 schedule_hrtimeout_range_clock+0x98/0x120 ? __hrtimer_init+0xb0/0xb0 usleep_range_state+0x60/0x90 mlx5_aso_poll_cq+0xad/0x190 [mlx5_core] mlx5e_ipsec_aso_update_curlft+0x81/0xb0 [mlx5_core] xfrm_timer_handler+0x6b/0x360 ? xfrm_find_acq_byseq+0x50/0x50 __hrtimer_run_queues+0x139/0x290 hrtimer_run_softirq+0x7d/0xe0 __do_softirq+0xc7/0x272 irq_exit_rcu+0x87/0xb0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:default_idle+0x18/0x20 Code: ae 7d ff ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 8b 05 b5 30 0d 01 85 c0 7e 07 0f 00 2d 0a e3 53 00 fb f4 <c3> 0f 1f 80 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 80 ad 01 00 RSP: 0018:ffff888100883ee0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffff888100849580 RCX: 4000000000000000 RDX: 0000000000000001 RSI: 0000000000000083 RDI: 000000000008863c RBP: 0000000000000011 R08: 00000064e6977fa9 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 default_idle_call+0x37/0xb0 do_idle+0x1cd/0x1e0 cpu_startup_entry+0x19/0x20 start_secondary+0xfe/0x120 secondary_startup_64_no_verify+0xcd/0xdb </TASK> softirq: huh, entered softirq 8 HRTIMER 00000000a97c08cb with preempt_count 00000100, exited with 00000000? Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-12net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused portsMatthias Schiffer
am65_cpsw_nuss_register_ndevs() skips calling devlink_port_type_eth_set() for ports without assigned netdev, triggering the following warning when DEVLINK_PORT_TYPE_WARN_TIMEOUT elapses after 3600s: Type was not set for devlink port. WARNING: CPU: 0 PID: 129 at net/core/devlink.c:8095 devlink_port_type_warn+0x18/0x30 Fixes: 0680e20af5fb ("net: ethernet: ti: am65-cpsw: Fix devlink port register sequence") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-12wifi: ath11k: Send PME message during wakeup from D3coldBaochen Qiang
We are seeing system stuck on some specific platforms due to WLAN chip fails to wakeup from D3cold state. With this flag, firmware will send PME message during wakeup and this issue is gone. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221010033237.415478-1-quic_bqiang@quicinc.com
2022-10-12wifi: ath11k: add support to configure channel dwell timeManikanta Pubbisetty
Add support to configure channel dwell time during scan. Dwell time help to stay on the channel for a specified duration during scan and aid userspace in finding WiFi networks. Very useful in passive scans where longer dwell times are needed to find the WiFi networks. Configure channel dwell time from duration of the scan request received from mac80211 when the duration is non-zero. When the scan request does not have duration value, use the default ones, the current implementation. Advertise corresponding feature flag NL80211_EXT_FEATURE_SET_SCAN_DWELL to enable the feature. Change is applicable for all ath11k hardware. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221007051130.6067-1-quic_mpubbise@quicinc.com
2022-10-12wifi: ath11k: suppress add interface errorKarthikeyan Periyasamy
In the VIF (other than monitor type) creation request, we should not throw the error code when the monitor VIF creation fails, since the actual VIF creation succeeds. If we throw the error code from driver then the actual VIF creation get fail. So suppress the monitor VIF creation error by throwing warning message instead of error code. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221006005842.8599-1-quic_periyasa@quicinc.com
2022-10-12wifi: ath11k: fix firmware assert during bandwidth change for peer staAditya Kumar Singh
Currently, ath11k sends peer assoc command for each peer to firmware when bandwidth changes. Peer assoc command is a bulky command and if many clients are connected, this could lead to firmware buffer getting overflowed leading to a firmware assert. However, during bandwidth change, only phymode and bandwidth also can be updated by WMI set peer param command. This makes the overall command light when compared to peer assoc and for multi-client cases, firmware buffer overflow also does not occur. Remove sending peer assoc command during sta bandwidth change and instead add sending WMI set peer param command for phymode and bandwidth. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Fixes: f187fe8e3bc65 ("ath11k: fix firmware crash during channel switch") Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221005095430.19890-1-quic_adisi@quicinc.com
2022-10-12wifi: ar5523: Fix use-after-free on ar5523_cmd() timed outShigeru Yoshida
syzkaller reported use-after-free with the stack trace like below [1]: [ 38.960489][ C3] ================================================================== [ 38.963216][ C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240 [ 38.964950][ C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0 [ 38.966363][ C3] [ 38.967053][ C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18 [ 38.968464][ C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 [ 38.969959][ C3] Call Trace: [ 38.970841][ C3] <IRQ> [ 38.971663][ C3] dump_stack_lvl+0xfc/0x174 [ 38.972620][ C3] print_report.cold+0x2c3/0x752 [ 38.973626][ C3] ? ar5523_cmd_tx_cb+0x220/0x240 [ 38.974644][ C3] kasan_report+0xb1/0x1d0 [ 38.975720][ C3] ? ar5523_cmd_tx_cb+0x220/0x240 [ 38.976831][ C3] ar5523_cmd_tx_cb+0x220/0x240 [ 38.978412][ C3] __usb_hcd_giveback_urb+0x353/0x5b0 [ 38.979755][ C3] usb_hcd_giveback_urb+0x385/0x430 [ 38.981266][ C3] dummy_timer+0x140c/0x34e0 [ 38.982925][ C3] ? notifier_call_chain+0xb5/0x1e0 [ 38.984761][ C3] ? rcu_read_lock_sched_held+0xb/0x60 [ 38.986242][ C3] ? lock_release+0x51c/0x790 [ 38.987323][ C3] ? _raw_read_unlock_irqrestore+0x37/0x70 [ 38.988483][ C3] ? __wake_up_common_lock+0xde/0x130 [ 38.989621][ C3] ? reacquire_held_locks+0x4a0/0x4a0 [ 38.990777][ C3] ? lock_acquire+0x472/0x550 [ 38.991919][ C3] ? rcu_read_lock_sched_held+0xb/0x60 [ 38.993138][ C3] ? lock_acquire+0x472/0x550 [ 38.994890][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 38.996266][ C3] ? do_raw_spin_unlock+0x16f/0x230 [ 38.997670][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 38.999116][ C3] call_timer_fn+0x1a0/0x6a0 [ 39.000668][ C3] ? add_timer_on+0x4a0/0x4a0 [ 39.002137][ C3] ? reacquire_held_locks+0x4a0/0x4a0 [ 39.003809][ C3] ? __next_timer_interrupt+0x226/0x2a0 [ 39.005509][ C3] __run_timers.part.0+0x69a/0xac0 [ 39.007025][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 39.008716][ C3] ? call_timer_fn+0x6a0/0x6a0 [ 39.010254][ C3] ? cpuacct_percpu_seq_show+0x10/0x10 [ 39.011795][ C3] ? kvm_sched_clock_read+0x14/0x40 [ 39.013277][ C3] ? sched_clock_cpu+0x69/0x2b0 [ 39.014724][ C3] run_timer_softirq+0xb6/0x1d0 [ 39.016196][ C3] __do_softirq+0x1d2/0x9be [ 39.017616][ C3] __irq_exit_rcu+0xeb/0x190 [ 39.019004][ C3] irq_exit_rcu+0x5/0x20 [ 39.020361][ C3] sysvec_apic_timer_interrupt+0x8f/0xb0 [ 39.021965][ C3] </IRQ> [ 39.023237][ C3] <TASK> In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below (there are other functions which finally call ar5523_cmd()): ar5523_probe() -> ar5523_host_available() -> ar5523_cmd_read() -> ar5523_cmd() If ar5523_cmd() timed out, then ar5523_host_available() failed and ar5523_probe() freed the device structure. So, ar5523_cmd_tx_cb() might touch the freed structure. This patch fixes this issue by canceling in-flight tx cmd if submitted urb timed out. Link: https://syzkaller.appspot.com/bug?id=9e12b2d54300842b71bdd18b54971385ff0d0d3a [1] Reported-by: syzbot+95001b1fd6dfcc716c29@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221009183223.420015-1-syoshida@redhat.com
2022-10-12wifi: carl9170: Remove -Warray-bounds exceptionKees Cook
GCC-12 emits false positive -Warray-bounds warnings with CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1], and there is top-level Makefile logic to remove -Warray-bounds for known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable '-Warray-bounds' universally for now"). Remove the local work-around. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679 Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221006192051.1742930-1-keescook@chromium.org
2022-10-12wifi: rtw89: 8852b: add basic attributes of chip_infoPing-Ke Shih
Add 8852b specific constant tables and basic attributes containing common chip_ops, firmware name, supported TX/RX NSS, number of CAM, coexistence version, control register set, and so on. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-10-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add functions to control BB to assist RF calibrationsPing-Ke Shih
When we are going to do RF calibrations, they need BB helpers to control TX PLCP, power, path and mode. Also, it they need helpers to backup and restore some registers before and after RF calibrations. Then, use flow of RF calibrations will be like backup registers, configure calibration, configure TX parameters, measure calibration result, and finally restore registers. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-9-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add chip_ops to configure TX/RX pathPing-Ke Shih
To support variant models, such as 1x1 or 1T2R, we need this chip_ops to change the path accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-8-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add chip_ops to query PPDUPing-Ke Shih
Add to parse PPDU to get frequency and RSSI of received packets. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-7-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add chip_ops related to BT coexistencePing-Ke Shih
These chip_ops are used to assist BT coexistence module to control chip specific operations, such as initial, pre-AGC, BT grant, set wifi priority and tx power, RX gain, and get BT counter. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-6-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add chip_ops to get thermalPing-Ke Shih
Thermal value reflects temperature that will affect RF performance, so we re-calibrate RF characteristics if delta of thermal over a threshold. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-5-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add basic baseband chip_opsPing-Ke Shih
chip_ops::bb_reset is to reset baseband state after loading parameters, because its state could be unpredictable at that moment. The other is chip_ops::bb_sethw that is to set some baseband settings not including in parameter tables. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-4-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add power on/off functionsPing-Ke Shih
We need power on function to enable hardware circuits of MAC/BB/RF, and then download firmware and load PHY parameters. After more settings, it starts to work. When it enters idle, use power off function to have the lowest power consumption. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-3-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add chip_ops::set_channel_helpPing-Ke Shih
This chip_ops is to assist set_channel, because we need setup and restore hardware before and after set_channel. Before set_channel, we stop transmitting, reset PPDU status, disable TSSI, and disable ADC. After set_channel, do opposite things in reverse order. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-2-pkshih@realtek.com
2022-10-12wifi: rtl8xxxu: Update module descriptionBitterblue Smith
Make the title more future-proof, using rtw88 as a model. Mention support for RTL8723BU, RTL8192EU, and RTL8188FU. Correct the module name. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/ecb7512a-07e8-112d-c815-1494582de5f8@gmail.com
2022-10-12wifi: rtl8xxxu: Fix reading the vendor of combo chipsBitterblue Smith
The wifi + bluetooth combo chips (RTL8723AU and RTL8723BU) read the chip vendor from the wrong register because the val32 variable gets overwritten. Add one more variable to avoid this. This had no real effect on RTL8723BU. It may have had an effect on RTL8723AU. Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/24af8024-2f07-552b-93d8-38823d8e3cb0@gmail.com
2022-10-12wifi: rtl8xxxu: Make some arrays constBitterblue Smith
All the initialisation tables, plus rtl8xxxu_rfregs. Most of them were already static. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/9407f219-a7ba-676e-3d99-154d67b312d2@gmail.com
2022-10-11Merge tag 'wireless-2022-10-11' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.1 First set of fixes for v6.1. Quite a lot of fixes in stack but also for mt76. cfg80211/mac80211 - fix locking error in mac80211's hw addr change - fix TX queue stop for internal TXQs - handling of very small (e.g. STP TCN) packets - two memcpy() hardening fixes - fix probe request 6 GHz capability warning - fix various connection prints - fix decapsulation offload for AP VLAN mt76 - fix rate reporting, LLC packets and receive checksum offload on specific chipsets iwlwifi - fix crash due to list corruption ath11k - fix a compiler warning with GCC 11 and KASAN * tag 'wireless-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: ath11k: mac: fix reading 16 bytes from a region of size 0 warning wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases) wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921 wifi: mt76: fix receiving LLC packets on mt7615/mt7915 wifi: nl80211: Split memcpy() of struct nl80211_wowlan_tcp_data_token flexible array wifi: wext: use flex array destination for memcpy() wifi: cfg80211: fix ieee80211_data_to_8023_exthdr handling of small packets wifi: mac80211: netdev compatible TX stop for iTXQ drivers wifi: mac80211: fix decap offload for stations on AP_VLAN interfaces wifi: mac80211: unlock on error in ieee80211_can_powered_addr_change() wifi: mac80211: remove/avoid misleading prints wifi: mac80211: fix probe req HE capabilities access wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rx wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer ==================== Link: https://lore.kernel.org/r/20221011163123.A093CC433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-11treewide: use get_random_bytes() when possibleJason A. Donenfeld
The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_u32() when possibleJason A. Donenfeld
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 2Jason A. Donenfeld
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done by hand, identifying all of the places where one of the random integer functions was used in a non-32-bit context. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11wifi: rtw89: fix wrong bandwidth settings after scanPo-Hao Huang
Set channel in driver side to configure Tx power and channel index correctly after scan. Before this, beacons with bandwidth larger than 20M bandwidth will be dropped by mac80211 due to frequency mismatch. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221007045900.10823-2-pkshih@realtek.com
2022-10-11wifi: rtw89: correct 6 GHz scan behaviorPo-Hao Huang
Change active scan behavior to fit 6GHz requirements. There are many different rules on active scan between 6GHz and 2GHz/5GHz, so if the SSID is not specified, do fast passive scanning and limit number of probe requests we send for now until new firmware can support all rules. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221007045900.10823-1-pkshih@realtek.com
2022-10-11wifi: rtw89: 8852b: add chip_ops::set_channelPing-Ke Shih
set_channel is main function to configure channel and bandwidth for all layers, namely MAC, BB and RF. Additionally, MAC layer enables CCK rate checking to avoid wrong rate from driver. BB layer configures SCO (Sample Clock Offset) for CCK, TX gain error/offset, and reset baseband hardware circuit after all configurations done. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005083212.45683-7-pkshih@realtek.com
2022-10-11wifi: rtw89: make generic functions to convert subband gain indexPing-Ke Shih
The gain tables use different domain index, so we need to convert the index from subband of chandef. Since these conversion functions can share with 8852b, make generic functions for further use. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005083212.45683-6-pkshih@realtek.com
2022-10-11wifi: rtw89: 8852b: add HFC quota arraysPing-Ke Shih
HFC is short for HCI flow control. These arrays are used to set quota according to operating modes, which are SCC or download firmware. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005083212.45683-5-pkshih@realtek.com
2022-10-11wifi: rtw89: 8852b: set proper configuration before loading NCTLPing-Ke Shih
Before loading RF NCTL table, we need to configure IQK/DPK clock and reset them, and then polling NCTL state ready. Since 8852BE needs additional one setting, add it by this patch. Also, give them proper names. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005083212.45683-4-pkshih@realtek.com
2022-10-11wifi: rtw89: parse PHY status only when PPDU is to_selfEric Huang
Without this fix, some non-self packets are used to count CFO (center frequency offset), and average CFO has unstable variation. Then, it causes unexpected performance. Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005083212.45683-3-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-09-18 22:52:23 +0000