summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-11-16wifi: zd1201: Avoid clashing function prototypesGustavo A. R. Silva
When built with Control Flow Integrity, function prototypes between caller and function declaration must match. These mismatches are visible at compile time with the new -Wcast-function-type-strict in Clang[1]. Fix a total of 30 warnings like these: ../drivers/net/wireless/zydas/zd1201.c:1560:2: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_freq *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict] (iw_handler) zd1201_set_freq, /* SIOCSIWFREQ */ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ The zd1201 Wireless Extension handler callbacks (iw_handler) use a union for the data argument. Actually use the union and perform explicit member selection in the function body instead of having a function prototype mismatch.There are no resulting binary differences before/after changes. These changes were made partly manually and partly with the help of Coccinelle. Link: https://github.com/KSPP/linux/issues/233 Link: https://reviews.llvm.org/D134831 [1] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/5b7fbb1a22d5bfaa872263ca20297de9b431d1ec.1667934775.git.gustavoars@kernel.org
2022-11-16wifi: hostap: Avoid clashing function prototypesGustavo A. R. Silva
When built with Control Flow Integrity, function prototypes between caller and function declaration must match. These mismatches are visible at compile time with the new -Wcast-function-type-strict in Clang[1]. Fix a total of 42 warnings like these: ../drivers/net/wireless/intersil/hostap/hostap_ioctl.c:3868:2: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, char *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict] (iw_handler) prism2_get_name, /* SIOCGIWNAME */ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ The hostap Wireless Extension handler callbacks (iw_handler) use a union for the data argument. Actually use the union and perform explicit member selection in the function body instead of having a function prototype mismatch. There are no resulting binary differences before/after changes. These changes were made partly manually and partly with the help of Coccinelle. Link: https://github.com/KSPP/linux/issues/235 Link: https://reviews.llvm.org/D134831 [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e480e7713f1a4909ae011068c8d793cc4a638fbd.1667934775.git.gustavoars@kernel.org
2022-11-16wifi: cfg80211: Avoid clashing function prototypesGustavo A. R. Silva
When built with Control Flow Integrity, function prototypes between caller and function declaration must match. These mismatches are visible at compile time with the new -Wcast-function-type-strict in Clang[1]. Fix a total of 73 warnings like these: drivers/net/wireless/intersil/orinoco/wext.c:1379:27: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_param *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict] IW_HANDLER(SIOCGIWPOWER, (iw_handler)orinoco_ioctl_getpower), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../net/wireless/wext-compat.c:1607:33: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_point *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict] [IW_IOCTL_IDX(SIOCSIWGENIE)] = (iw_handler) cfg80211_wext_siwgenie, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/net/wireless/intersil/orinoco/wext.c:1390:27: error: incompatible function pointer types initializing 'const iw_handler' (aka 'int (*const)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') with an expression of type 'int (struct net_device *, struct iw_request_info *, struct iw_param *, char *)' [-Wincompatible-function-pointer-types] IW_HANDLER(SIOCGIWRETRY, cfg80211_wext_giwretry), ^~~~~~~~~~~~~~~~~~~~~~ The cfg80211 Wireless Extension handler callbacks (iw_handler) use a union for the data argument. Actually use the union and perform explicit member selection in the function body instead of having a function prototype mismatch. There are no resulting binary differences before/after changes. These changes were made partly manually and partly with the help of Coccinelle. Link: https://github.com/KSPP/linux/issues/234 Link: https://reviews.llvm.org/D134831 [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/a68822bf8dd587988131bb6a295280cb4293f05d.1667934775.git.gustavoars@kernel.org
2022-11-16wifi: orinoco: Avoid clashing function prototypesGustavo A. R. Silva
When built with Control Flow Integrity, function prototypes between caller and function declaration must match. These mismatches are visible at compile time with the new -Wcast-function-type-strict in Clang[1]. Fix a total of 43 warnings like these: drivers/net/wireless/intersil/orinoco/wext.c:1379:27: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_param *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict] IW_HANDLER(SIOCGIWPOWER, (iw_handler)orinoco_ioctl_getpower), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The orinoco Wireless Extension handler callbacks (iw_handler) use a union for the data argument. Actually use the union and perform explicit member selection in the function body instead of having a function prototype mismatch. No significant binary differences were seen before/after changes. These changes were made partly manually and partly with the help of Coccinelle. Link: https://github.com/KSPP/linux/issues/234 Link: https://reviews.llvm.org/D134831 [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e564003608a1f2ad86283370ef816805c92b30f6.1667934775.git.gustavoars@kernel.org
2022-11-16wifi: rtl8xxxu: Use u32_get_bits in *_identify_chipBitterblue Smith
It simplifies the code a bit. Suggested-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/68f94284-3728-7b75-2b7b-64fae8af6bc5@gmail.com
2022-11-16wifi: rtl8xxxu: Use strscpy instead of sprintfBitterblue Smith
Fill priv->chip_name and priv->chip_vendor with strscpy instead of sprintf. This is just to prevent future bugs in case the name of a chip/vendor becomes longer than the size of chip_name/chip_vendor. Suggested-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/5fc9cc0e-eecb-8428-aeb1-f745791c0f16@gmail.com
2022-11-16wifi: rtl8xxxu: Name some bits used in burst initBitterblue Smith
Use descriptive names instead of magic numbers. Suggested-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e7d05bd9-e096-8361-f1b4-3c8b8599a7eb@gmail.com
2022-11-16wifi: rtl8xxxu: Rename rtl8xxxu_8188f_channel_to_groupBitterblue Smith
This name is an anomaly. Change it to rtl8188f_channel_to_group to follow the same pattern as the other functions. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/ba8e3ea2-74f5-e1db-296e-4ae5f03084dc@gmail.com
2022-11-16wifi: rtl8xxxu: Split up rtl8xxxu_identify_chipBitterblue Smith
Move the reusable parts into separate functions and create one identify_chip function for each chip type. This is preparation for supporting the RTL8710BU chip, which would need too many ugly changes to this function. Another reason to do this is to get rid of the long and scary if..else if..else block in the middle of the function. Everything should still work the same as before. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/b268b5cf-071c-6292-0d90-0573e4fb2228@gmail.com
2022-11-16wifi: rtl8xxxu: Move burst init to a functionBitterblue Smith
No changes to functionality, just moving code to make rtl8xxxu_init_device look nicer. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/bef90bf8-716f-c92f-9403-12ef2bfefc15@gmail.com
2022-11-16net: thunderbolt: Fix error handling in tbnet_init()Yuan Can
A problem about insmod thunderbolt-net failed is triggered with following log given while lsmod does not show thunderbolt_net: insmod: ERROR: could not insert module thunderbolt-net.ko: File exists The reason is that tbnet_init() returns tb_register_service_driver() directly without checking its return value, if tb_register_service_driver() failed, it returns without removing property directory, resulting the property directory can never be created later. tbnet_init() tb_register_property_dir() # register property directory tb_register_service_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without remove property directory Fix by remove property directory when tb_register_service_driver() returns error. Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable") Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() ↵Shang XiaoJing
and sparx5_start() sparx_stats_init() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: sparx_stats_init() create_singlethread_workqueue() # failed, sparx5->stats_queue is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL. So as sparx5_start(). Fixes: af4b11022e2d ("net: sparx5: add ethtool configuration and statistics support") Fixes: b37a1bae742f ("net: sparx5: add mactable support") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init()Shang XiaoJing
lan966x_stats_init() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: lan966x_stats_init() create_singlethread_workqueue() # failed, lan966x->stats_queue is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL. Fixes: 12c2d0a5b8e2 ("net: lan966x: add ethtool configuration and statistics") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: implement counters readout to TC statsEdward Cree
On FLOW_CLS_STATS, look up the MAE counter by TC cookie, and report the change in packet and byte count since the last time FLOW_CLS_STATS read them. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: validate MAE action orderEdward Cree
Currently the only actions supported are COUNT and DELIVER, which can only happen in the right order; but when more actions are added, it will be necessary to check that they are only used in the same order in which the hardware performs them (since the hardware API takes an action *set* in which the order is implicit). For instance, a VLAN pop must not follow a VLAN push. Most practical use-cases should be unaffected by these restrictions. Add a function efx_tc_flower_action_order_ok() that checks whether it is appropriate to add a specified action to the existing action-set. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: attach an MAE counter to TC actions that need itEdward Cree
The only actions that expect stats (that sfc HW supports) are gact shot (drop), mirred redirect and mirred mirror. Since these are 'deliverish' actions that end an action-set, we only require at most one counter per action-set. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: accumulate MAE counter values from update packetsEdward Cree
Add the packet and byte counts to the software running total, and store the latest jiffies every time the counter is bumped. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: add functions to allocate/free MAE countersEdward Cree
efx_tc_flower_get_counter_index() will create an MAE counter mapped to the passed (TC filter) cookie, or increment the reference if one already exists for that cookie. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: add hashtables for MAE counters and counter ID mappingsEdward Cree
Nothing populates them yet. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: add extra RX channel to receive MAE counter updates on ef100Edward Cree
Currently there is no counter-allocating machinery to connect the resulting counter update values to; that will be added in a subsequent patch. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: add ef100 MAE counter support functionsEdward Cree
Start and stop MAE counter streaming, and grant credits. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: add ability for extra channels to receive raw RX buffersEdward Cree
The TC extra channel will need its own special RX handling, which must operate before any code that expects the RX buffer to contain a network packet; buffers on this RX queue contain MAE counter packets in a special format that does not resemble an Ethernet frame, and many fields of the RX packet prefix are not populated. The USER_MARK field, however, is populated with the generation count from the counter subsystem, which needs to be passed on to the RX handler. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: add start and stop methods to channelsEdward Cree
The TC extra channel needs to do extra work in efx_{start,stop}_channels() to start/stop MAE counter streaming from the hardware. Add callbacks for it to implement. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: add ability for an RXQ to grant credits on refillEdward Cree
EF100 hardware streams MAE counter updates to the driver over a dedicated RX queue; however, the MCPU is not able to detect when RX buffers have been posted to the ring. Thus, the driver must call MC_CMD_MAE_COUNTERS_STREAM_GIVE_CREDITS; this patch adds the infrastructure to support that to the core RXQ handling code. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16sfc: fix ef100 RX prefix macroEdward Cree
Macro PREFIX_WIDTH_MASK uses unsigned long arithmetic for a shift of up to 32 bits, which breaks on 32-bit systems. This did not previously show up as we weren't using any fields of width 32, but we now need to access ESF_GZ_RX_PREFIX_USER_MARK. Change it to unsigned long long. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-15net: mscc: ocelot: drop workaround for forcing RX flow controlVladimir Oltean
As phylink gained generic support for PHYs with rate matching via PAUSE frames, the phylink_mac_link_up() method will be called with the maximum speed and with rx_pause=true if rate matching is in use. This means that setups with 2500base-x as the SERDES protocol between the MAC/PCS and the PHY now work with no need for the driver to do anything special. Tested with fsl-ls1028a-qds-7777.dts. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15net: dsa: felix: use phylink_generic_validate()Vladimir Oltean
Drop the custom implementation of phylink_validate() in favor of the generic one, which requires config->mac_capabilities to be set. This was used up until now because of the possibility of being paired with Aquantia PHYs with support for rate matching. The phylink framework gained generic support for these, and knows to advertise all 10/100/1000 lower speed link modes when our SERDES protocol is 2500base-x (fixed speed). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15net: phy: aquantia: add AQR112 and AQR412 PHY IDsVladimir Oltean
These are Gen3 Aquantia N-BASET PHYs which support 5GBASE-T, 2.5GBASE-T, 1000BASE-T and 100BASE-TX (not 10G); also EEE, Sync-E, PTP, PoE. The 112 is a single PHY package, the 412 is a quad PHY package. The system-side SERDES interface of these PHYs selects its protocol depending on the negotiated media side link speed. That protocol can be 1000BASE-X, 2500BASE-X, 10GBASE-R, SGMII, USXGMII. The configuration of which SERDES protocol to use for which link speed is made by firmware; even though it could be overwritten over MDIO by Linux, we assume that the firmware provisioning is ok for the board on which the driver probes. For cases when the system side runs at a fixed rate, we want phylib/phylink to detect the PAUSE rate matching ability of these PHYs, so we need to use the Aquantia rather than the generic C45 driver. This needs aqr107_read_status() -> aqr107_read_rate() to set phydev->rate_matching, as well as the aqr107_get_rate_matching() method. I am a bit unsure about the naming convention in the driver. Since AQR107 is a Gen2 PHY, I assume all functions prefixed with "aqr107_" rather than "aqr_" mean Gen2+ features. So I've reused this naming convention. I've tested PHY "SGMII" statistics as well as the .link_change_notify method, which prints: Aquantia AQR412 mdio_mux-0.4:00: Link partner is Aquantia PHY, FW 4.3, fast-retrain downshift advertised, fast reframe advertised Tested SERDES protocols are usxgmii and 2500base-x (the latter with PAUSE rate matching). Tested link modes are 100/1000/2500 Base-T (with Aquantia link partner and with other link partners). No notable events observed. The placement of these PHY IDs in the driver is right before AQR113C, a Gen4 PHY. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ↵Liu Jian
ag71xx_open() If ag71xx_hw_enable() fails, call phylink_disconnect_phy() to clean up. And if phylink_of_phy_connect() fails, nothing needs to be done. Compile tested only. Fixes: 892e09153fa3 ("net: ag71xx: port to phylink") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221114095549.40342-1-liujian56@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15net: ethernet: mtk_eth_soc: enable hardware DSA untaggingFelix Fietkau
- pass the tag to DSA via metadata dst - disabled on 7986 for now, since it's not working yet - disabled if a MAC is enabled that does not use DSA This improves performance by bypassing the DSA tag driver and avoiding extra skb data mangling Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15net: ethernet: mtk_eth_soc: add support for configuring vlan rx offloadFelix Fietkau
Keep the vlan rx offload feature in sync across all netdevs belonging to the device, since the feature is global and can't be turned off per MAC Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15net: ethernet: mtk_eth_soc: pass correct VLAN protocol ID to the network stackFelix Fietkau
Use the id from the DMA descriptor instead of hardcoding 802.1q Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15net: hns3: fix setting incorrect phy link ksettings for firmware in ↵Guangbin Huang
resetting process Currently, if driver is in phy-imp(phy controlled by imp firmware) mode, as driver did not update phy link ksettings after initialization process or not update advertising when getting phy link ksettings from firmware, it may set incorrect phy link ksettings for firmware in resetting process. So fix it. Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs") Fixes: c5ef83cbb1e9 ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config") Fixes: 2312e050f42b ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-15net: hns3: fix return value check bug of rx copybreakJie Wang
The refactoring of rx copybreak modifies the original return logic, which will make this feature unavailable. So this patch fixes the return logic of rx copybreak. Fixes: e74a726da2c4 ("net: hns3: refactor hns3_nic_reuse_page()") Fixes: 99f6b5fb5f63 ("net: hns3: use bounce buffer when rx page can not be reused") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-15net: hns3: fix incorrect hw rss hash type of rx packetJian Shen
Currently, the HNS3 driver reports the rss hash type of each packet based on the rss hash tuples set. It always reports PKT_HASH_TYPE_L4, without checking the type of current packet. It's incorrect. Fixes it by reporting it base on the packet type. Fixes: 796640778c26 ("net: hns3: support RXD advanced layout") Fixes: 232fc64b6e62 ("net: hns3: Add HW RSS hash information to RX skb") Fixes: ea4858670717 ("net: hns3: handle the BD info on the last BD of the packet") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-15net: phy: marvell: add sleep time after enabling the loopback bitAminuddin Jamaluddin
Sleep time is added to ensure the phy to be ready after loopback bit was set. This to prevent the phy loopback test from failing. Fixes: 020a45aff119 ("net: phy: marvell: add Marvell specific PHY loopback") Cc: <stable@vger.kernel.org> # 5.15.x Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Aminuddin Jamaluddin <aminuddin.jamaluddin@intel.com> Link: https://lore.kernel.org/r/20221114065302.10625-1-aminuddin.jamaluddin@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-15net: ena: Fix error handling in ena_init()Yuan Can
The ena_init() won't destroy workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20221114025659.124726-1-yuancan@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-14net: ionic: Fix error handling in ionic_init_module()Yuan Can
A problem about ionic create debugfs failed is triggered with the following log given: [ 415.799514] debugfs: Directory 'ionic' with parent '/' already present! The reason is that ionic_init_module() returns ionic_bus_register_driver() directly without checking its return value, if ionic_bus_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of ionic can never be created later. ionic_init_module() ionic_debugfs_create() # create debugfs directory ionic_bus_register_driver() pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when ionic_bus_register_driver() returns error. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20221113092929.19161-1-yuancan@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14net: nfp: Remove linux/msi.h includesThomas Gleixner
Nothing in these files needs anything from linux/msi.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: oss-drivers@corigine.com Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14net: dpaa2: Remove linux/msi.h includesThomas Gleixner
Nothing in these file needs anything from linux/msi.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14mlxsw: Avoid warnings when not offloaded FDB entry with IPv6 is removedAmit Cohen
FDB entries that perform VXLAN encapsulation with an IPv6 underlay hold a reference on a resource - the KVDL entry where the IPv6 underlay destination IP is stored. For that, the driver maintains two hash tables: 1. Maps IPv6 to KVDL index 2. Maps {MAC, FID index} to IPv6 address When a FDB entry is removed, the second table is used to find the relevant IPv6 address and the first table is used to remove the reference count and free the index if is not used anymore. In order for a packet to be forwarded to a single remote VTEP, FDB entries need to be configured at both the bridge and VXLAN devices' FDB tables. Both entries are squashed into one {MAC, VLAN/VNI} -> IP entry in the hardware. Therefore, in case one entry is removed, the entry will be removed from the hardware and the remaining entry will be unmarked with 'offload' flag since it is not offloaded anymore. For example, the two FDB entries should be added to allow packets to be forwarded via vx10: $ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff self static dst 2001:db8:5::1 $ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff master static vlan 10 When one entry will be removed, the second one will not be offloaded anymore. When the first entry (in VXLAN FDB) will be removed / will not be offloaded anymore, the two mappings in IPv6 hash tables will be removed. In case that the second entry is removed before the first one, unexpected warnings[1][2] will be shown in user space as a result of removing the first entry. The issue is that not offloaded entry is removed, the driver tries to search the relevant entries in the hash tables, does not find them and therefore warns. Do not handle removing of not offloaded VXLAN FDB entries, as they were already removed when the offload flag was removed. [1]: WARNING: CPU: 1 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c:914 mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum] ... Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum] RIP: 0010:mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum] ... Call Trace: <TASK> mlxsw_sp_port_fdb_tunnel_uc_op+0x6cf/0x7b0 [mlxsw_spectrum] mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum] ? finish_task_switch.isra.0+0x8c/0x290 process_one_work+0x1cd/0x390 worker_thread+0x48/0x3c0 ? process_one_work+0x390/0x390 kthread+0xe0/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> [2]: WARNING: CPU: 0 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3035 mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum] ... Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum] RIP: 0010:mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum] ... Call Trace: <TASK> ? mlxsw_sp_port_fdb_tun_uc_op6_sfd_write+0x5c1/0x610 [mlxsw_spectrum] mlxsw_sp_port_fdb_tunnel_uc_op+0x6ec/0x7b0 [mlxsw_spectrum] mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum] ? finish_task_switch.isra.0+0x8c/0x290 process_one_work+0x1cd/0x390 worker_thread+0x48/0x3c0 ? process_one_work+0x390/0x390 kthread+0xe0/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: 0860c7641634 ("mlxsw: spectrum_nve: Keep track of IPv6 addresses used by FDB entries") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/c186de8cbd28e3eb661e06f31f7f2f2dff30020f.1668184350.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14net: ethernet: renesas: rswitch: Fix build error about ptpYoshihiro Shimoda
If CONFIG_PTP_1588_CLOCK_OPTIONAL=m and CONFIG_RENESAS_ETHER_SWITCH=y, the following build error happened: aarch64-linux-ld: DWARF error: could not find abbrev number 60 drivers/net/ethernet/renesas/rswitch.o: in function `rswitch_get_ts_info': rswitch.c:(.text+0x408): undefined reference to `ptp_clock_index' aarch64-linux-ld: DWARF error: could not find abbrev number 1190123 drivers/net/ethernet/renesas/rcar_gen4_ptp.o: in function `rcar_gen4_ptp_register': rcar_gen4_ptp.c:(.text+0x4dc): undefined reference to `ptp_clock_register' aarch64-linux-ld: drivers/net/ethernet/renesas/rcar_gen4_ptp.o: in function `rcar_gen4_ptp_unregister': rcar_gen4_ptp.c:(.text+0x584): undefined reference to `ptp_clock_unregister' To fix the issue, add "depends on PTP_1588_CLOCK_OPTIONAL" into the Kconfig. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Fixes: 6c6fa1a00ad3 ("net: ethernet: renesas: rswitch: Add R-Car Gen4 gPTP support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221110012720.3552060-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14Merge tag 'mlx5-updates-2022-11-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2022-11-12 Misc updates to mlx5 driver 1) Support enhanced CQE compression, on ConnectX6-Dx Reduce irq rate, cpu utilization and latency. 2) Connection tracking: Optimize the pre_ct table lookup for rules installed on chain 0. 3) implement ethtool get_link_ext_stats for PHY down events 4) Expose device vhca_id to debugfs 5) misc cleanups and trivial changes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-14net: fec: add xdp and page pool statisticsShenwei Wang
Added xdp and page pool statistics. In order to make the implementation simple and compatible, the patch uses the 32bit integer to record the XDP statistics. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-14net: microchip: sparx5: Add KUNIT test of counters and sorted rulesSteen Hegelund
This tests the insert, move and deleting of rules and checks that the unused VCAP addresses are initialized correctly. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-14net: microchip: sparx5: Add support for TC flower filter statisticsSteen Hegelund
This provides flower filter packet statistics (bytes are not supported) via the dedicated IS2 counter feature. All rules having the same TC cookie will contribute to the packet statistics for the filter as they are considered to be part of the same TC flower filter. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-14net: microchip: sparx5: Add support for IS2 VCAP rule countersSteen Hegelund
This adds API methods to set and get a rule counter. A VCAP instance may contain the counter as part of the VCAP cache area, and this counter may be one or more bits in width. This type of counter automatically increments it value when the rule is hit. Other VCAP instances have a dedicated counter area outside of the VCAP and in this case the rule must contain the counter id to be able to locate the counter value. In this case there must also be a rule action that updates the counter using the rule id when the rule is hit. The Sparx5 IS2 VCAP uses a dedicated counter area. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-14net: microchip: sparx5: Add/delete rules in sorted orderSteen Hegelund
This adds a sorting criteria to rule insertion and deletion. The criteria is (in the listed order): - Rule size (largest size first) - User (based on an enumerated user value) - Priority (highest priority first, aka lowest value) When a rule is deleted the other rules may need to be moved to fill the gap to use the available VCAP address space in the best possible way. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-14net: microchip: sparx5: Add support for TC flower ARP dissectorSteen Hegelund
This add support for Sparx5 for dissecting TC ARP flower filter keys and sets up the Sparx5 IS2 VCAP to generate the ARP keyset for ARP frames. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-14net: mhi: Fix memory leak in mhi_net_dellink()Wei Yongjun
MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch calls free_netdev() to fix it since netdev_priv is used after unregister. Fixes: 13adac032982 ("net: mhi_net: Register wwan_ops for link creation") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 07:25:01 +0000