summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-02-19ice: add backslash-n to stringsJesse Brandeburg
There were several strings found without line feeds, fix them by adding a line feed, as is typical. Without this lotsofmessagescanbejumbledtogether. This patch has known checkpatch warnings from long lines for the NL_* messages, because checkpatch doesn't know how to ignore them. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: increase PF reset wait timeout to 300 millisecondsJacob Keller
Increase the maximum time that the driver will wait for a PF reset from 200 milliseconds to 300 milliseconds, to account for possibility of a slightly longer than expected PF reset. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: Support XDP UMEM wake up mechanismKrzysztof Kazimierczak
Add support for a new AF_XDP feature that has already been introduced in upstreamed Intel NIC drivers. If a user space application signals that it might sleep using the new bind flag XDP_USE_NEED_WAKEUP, the driver will then set this flag if it has no more buffers on the NIC Rx ring and yield to the application. For Tx, it will set the flag if it has no outstanding Tx completion interrupts and return to the application. Signed-off-by: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: SW DCB, report correct max TC valueDave Ertman
lldpad is using the value reported in the DCB config for max_tc as the max allowed number of TCs, not the current max. ICE driver was reporting it as current maximum TC. Change DCB_NL function to report maximum TC allowed by this device. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: Report correct DCB modeAvinash Dayanand
Add code to detect if DCB is in IEEE or CEE mode. Without this the code will always report as IEEE mode which is incorrect and confuses the user. Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Signed-off-by: Scott Register <scottx.register@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: Add DCBNL ops required to configure ETS in CEE for SW DCBAvinash JD
Couple of DCBNL ops are required for configuring ETS in SW DCB CEE mode. If these functions are not added, it'll break the CEE functionality. Signed-off-by: Avinash JD <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: Always clear the QRXFLXP_CNTXT register for VF Rx queuesBrett Creeley
Currently when the PF reduces its number of channels via ethtool and then VFs are created there may be stale data for some of the Rx queues belonging to VFs. This happens when a VF reuses an Rx queue that was previously used by the PF. Specifically, the QRXFLXP_CNTXT register will have incorrect values. Fix this by always clearing the relevant values in the QRXFLXP_CNTXT register for VF queues. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: Fix for TCAM entry managementDan Nowlin
Order intermediate VSIG list correct in order to correctly match existing VSIG lists. When overriding pre-existing TCAM entries, properly delete the existing entry and remove it from the change/update list. Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: update malicious driver detection event handlingPaul Greenwalt
Update the PF VFs MDD event message to rate limit once per second and report the total number Rx|Tx event count. Add support to print pending MDD events that occur during the rate limit. The use of net_ratelimit did not allow for per VF Rx|Tx granularity. Additional PF MDD log messages are guarded by netif_msg_[rx|tx]_err(). Since VF RX MDD events disable the queue, add ethtool private flag mdd-auto-reset-vf to configure VF reset to re-enable the queue. Disable anti-spoof detection interrupt to prevent spurious events during a function reset. To avoid race condition do not make PF MDD register reads conditional on global MDD result. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: Validate config for SW DCB mapAvinash Dayanand
Validate the inputs for SW DCB config received either via lldptool or pcap file. And don't apply DCB for bad bandwidth inputs. Without this patch, any config having bad inputs will cause the loss of link making PF unusable even after driver reload. Recoverable only via system reboot. Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: Wait for VF to be reset/ready before configurationBrett Creeley
The configuration/command below is failing when the VF in the xml file is already bound to the host iavf driver. pci_0000_af_0_0.xml: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0x0000' bus='0xaf' slot='0x0' function='0x0'/> </source> <mac address='00:de:ad:00:11:01'/> </interface> > virsh attach-device domain_name pci_0000_af_0_0.xml error: Failed to attach device from pci_0000_af_0_0.xml error: Cannot set interface MAC/vlanid to 00:de:ad:00:11:01/0 for ifname ens1f1 vf 0: Device or resource busy This is failing because the VF has not been completely removed/reset after being unbound (via the virsh command above) from the host iavf driver and ice_set_vf_mac() checks if the VF is disabled before waiting for the reset to finish. Fix this by waiting for the VF remove/reset process to happen before checking if the VF is disabled. Also, since many functions for VF administration on the PF were more or less calling the same 3 functions (ice_wait_on_vf_reset(), ice_is_vf_disabled(), and ice_check_vf_init()) move these into the helper function ice_check_vf_ready_for_cfg(). Then call this function in any flow that attempts to configure/query a VF from the PF. Lastly, increase the maximum wait time in ice_wait_on_vf_reset() to 800ms, and modify/add the #define(s) that determine the wait time. This was done for robustness because in rare/stress cases VF removal can take a max of ~800ms and previously the wait was a max of ~300ms. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: Don't tell the OS that link is going downMichal Swiatkowski
Remove code that tell the OS that link is going down when user change flow control via ethtool. When link is up it isn't certain that link goes down after 0x0605 aq command. If link doesn't go down, OS thinks that link is down, but physical link is up. To reset this state user have to take interface down and up. If link goes down after 0x0605 command, FW send information about that and after that driver tells the OS that the link goes down. So this code in ethtool is unnecessary. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19ice: Don't reject odd values of usecs set by userBrett Creeley
Currently if a user sets an odd [tx|rx]-usecs value through ethtool, the request is denied because the hardware is set to have an ITR granularity of 2us. This caused poor customer experience. Fix this by aligning to a register allowed value, which results in rounding down. Also, print a once per ring container type message to be clear about our intentions. Also, change the ITR_TO_REG define to be the bitwise and of the ITR setting and the ICE_ITR_MASK. This makes the purpose of ITR_TO_REG more obvious. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19vmxnet3: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19r8152: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19hv_netvsc: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: socionext: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: qcom/emac: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19ionic: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19jme: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19e1000(e): use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19enic: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19bna: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: atheros: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19r8169: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Simplify the code by using the new helper tcp_v6_gso_csum_prep. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: mvneta: align xdp stats naming scheme to mlx5 driverLorenzo Bianconi
Introduce "rx" prefix in the name scheme for xdp counters on rx path. Differentiate between XDP_TX and ndo_xdp_xmit counters Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19octeontx2-af: Cleanup nixlf and blkaddr retrieval logicSunil Goutham
Cleanedup repititive nixlf and blkaddr retrieving logic is various mailbox handlers throughout the rvu_nix.c file. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19octeontx2-af: Cleanup CGX config permission checksSunil Goutham
Most of the CGX register config is restricted to mapped RVU PFs, this patch cleans up these permission checks spread across the rvu_cgx.c file by moving the checks to a common fn(). Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19octeontx2-af: Remove unnecessary export symbols in CGX driverSunil Goutham
Since CGX driver and AF driver are built into a single module the export symbols in CGX driver are not needed. This patch gets rid of them. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net/mlx5e: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-02-18net/mlx5: Remove a useless 'drain_workqueue()' call in 'mlx5e_ipsec_cleanup()'Christophe JAILLET
'destroy_workqueue()' already calls 'drain_workqueue()', there is no need to call it explicitly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Add support for FEC modes based on 50G per lane linksAya Levin
Introduce new FEC modes: - RS-FEC-(544,514) - LL_RS-FEC-(272,257+1) Add support in ethtool for set and get callbacks for the new modes above. While RS-FEC-(544,514) is mapped to exsiting RS FEC mode, LL_RS-FEC-(272,257+1) is mapped to a new ethtool link mode: LL-RS. Add support for FEC on 50G per lane link modes up to 400G. The new link modes uses a u16 fields instead of u8 fields for the legacy link modes. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18ethtool: Add support for low latency RS FECAya Levin
Add support for low latency Reed Solomon FEC as LLRS. The LL-FEC is defined by the 25G/50G ethernet consortium, in the document titled "Low Latency Reed Solomon Forward Error Correction" Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
2020-02-18net/mlxe5: Separate between FEC and current speedAya Levin
FEC mode is per link type, not necessary per speed. This patch access FEC register by link modes instead of speeds. This patch will allow further enhacment of link modes supporting FEC with the same speed (different lane type). Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Advertise globaly supported FEC modesAya Levin
Ethtool advertise supported link modes on an interface. Per each FEC mode, query if there is a link type which supports it. If so, add this FEC mode to the supported FEC modes list. Prior to this patch, ethtool advertised only the supported FEC modes on the current link type. Add an explicit mapping between internal FEC modes and ethtool link mode bits. With this change, adding new FEC modes in the downstream patch would be easier. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Enforce setting of a single FEC modeAya Levin
Ethtool command allow setting of several FEC modes in a single set command. The driver can only set a single FEC mode at a time. With this patch driver will reply not-supported on setting several FEC modes. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Set FEC to auto when configured mode is not supportedAya Levin
When configuring FEC mode, driver tries to set it for all available link types. If a link type doesn't support a FEC mode, set this link type to auto (FW best effort). Prior to this patch, when a link type didn't support a FEC mode is was set to no FEC. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18mlx5: Use proper logging and tracing line terminationsJoe Perches
netdev_err should use newline termination but mlx5_health_report is used in a trace output function devlink_health_report where no newline should be used. Remove the newlines from a couple formats and add a format string of "%s\n" to the netdev_err call to not directly output the logging string. Also use snprintf to avoid any possible output string overrun. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Support dump callback in RX reporterAya Levin
Add support for SQ's FW dump on RX reporter's events. Use Resource dump API to retrieve the relevant data: RX slice, RQ dump, RX buffer and ICOSQ dump (depends on the error). Wrap it in formatted messages and store the binary output in devlink core. Example: $ devlink health dump show pci/0000:00:0b.0 reporter rx RX Slice: data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de RQs: RQ: rqn: 1512 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de RQ: rqn: 1517 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de $ devlink health dump show pci/0000:00:0b.0 reporter rx -jp { "RX Slice": { "data":[ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222] }, "RQs": [ { "RQ": { "index": 1512, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222] } },{ "RQ": { "index": 1517, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173] } } ] } Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Support dump callback in TX reporterAya Levin
Add support for SQ's FW dump on TX reporter's events. Use Resource dump API to retrieve the relevant data: SX slice, SQ dump and SQ buffer. Wrap it in formatted messages and store the binary output in devlink core. Example: $ devlink health dump show pci/0000:00:0b.0 reporter tx SX Slice: data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff SQs: SQ: index: 1511 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff SQ: index: 1516 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff $ devlink health dump show pci/0000:00:0b.0 reporter tx -jp { "SX Slice": { "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255], }, "SQs": [ { "SQ": { "index": 1511, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255] } },{ "SQ": { "index": 1516, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255] } } ] } Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Gather reporters APIs togetherAya Levin
Assemble all the API's to ease insertion of dump callbacks in the following patches in the set. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5: Add support for resource dumpAya Levin
On driver load: - Initialize resource dump data structure and memory access tools (mkey & pd). - Read the resource dump's menu which contains the FW segment identifier. Each record is identified by the segment name (ASCII). During the driver's course of life, users (like reporters) may request dumps per segment. The user should create a command providing the segment identifier (SW enumeration) and command keys. In return, the user receives a command context. In order to receive the dump, the user should supply the command context and a memory (aligned to a PAGE) on which the dump content will be written. Since the dump may be larger than the given memory, the user may resubmit the command until received an indication of end-of-dump. It is the user's responsibility to destroy the command. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5: DR, Handle reformat capability over sw-steering tablesErez Shitrit
On flow table creation, send the relevant flags according to what the FW currently supports. When FW doesn't support reformat option over SW-steering managed table, the driver shouldn't pass this. Fixes: 988fd6b32d07 ("net/mlx5: DR, Pass table flags at creation to lower layer") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5: Fix lowest FDB pool sizePaul Blakey
The pool sizes represent the pool sizes in the fw. when we request a pool size from fw, it will return the next possible group. We track how many pools the fw has left and start requesting groups from the big to the small. When we start request 4k group, which doesn't exists in fw, fw wants to allocate the next possible size, 64k, but will fail since its exhausted. The correct smallest pool size in fw is 128 and not 4k. Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities") Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Don't clear the whole vf config when switching modesDmytro Linkin
There is no need to reset all vf config (except link state) between legacy and switchdev modes changes. Also, set link state to AUTO, when legacy enabled. Fixes: 3b83b6c2e024 ("net/mlx5e: Clear VF config when switching modes") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5: DR, Fix matching on vport gvmiHamdan Igbaria
Set vport gvmi in the tag, only when source gvmi is set in the bit mask. Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Fix crash in recovery flow without devlink reporterAya Levin
When health reporters are not supported, recovery function is invoked directly, not via devlink health reporters. In this direct flow, the recover function input parameter was passed incorrectly and is causing a kernel oops. This patch is fixing the input parameter. Following call trace is observed on rx error health reporting. Internal error: Oops: 96000007 [#1] PREEMPT SMP Process kworker/u16:4 (pid: 4584, stack limit = 0x00000000c9e45703) Call trace: mlx5e_rx_reporter_err_rq_cqe_recover+0x30/0x164 [mlx5_core] mlx5e_health_report+0x60/0x6c [mlx5_core] mlx5e_reporter_rq_cqe_err+0x6c/0x90 [mlx5_core] mlx5e_rq_err_cqe_work+0x20/0x2c [mlx5_core] process_one_work+0x168/0x3d0 worker_thread+0x58/0x3d0 kthread+0x108/0x134 Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDYAya Levin
Initialize RQ doorbell counters to zero prior to moving an RQ from RST to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor ID on the completion is reset. The doorbell record must comply. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reported-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepaHuy Nguyen
rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa cannot take mutex lock. Two possible issues can happen: 1. User at the same time change vepa mode via RTM_SETLINK command. 2. User at the same time change the switchdev mode via devlink netlink interface. Case 1 cannot happen because rtnl executes one message in order. Case 2 can happen but we do not expect user to change the switchdev mode when changing vepa. Even if a user does it, so he will read a value which is no longer valid. Fixes: 8da202b24913 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18sfc: elide assignment of skbEdward Cree
Instead of assigning skb = segments before the loop, just pass segments directly as the first argument to skb_list_walk_safe(). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 14:12:38 +0000