summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-10-26net: phylink: use supported_interfaces for phylink validationRussell King (Oracle)
If the network device supplies a supported interface bitmap, we can use that during phylink's validation to simplify MAC drivers in two ways by using the supported_interfaces bitmap to: 1. reject unsupported interfaces before calling into the MAC driver. 2. generate the set of all supported link modes across all supported interfaces (used mainly for SFP, but also some 10G PHYs.) Suggested-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26ifb: Depend on netfilter alternatively to tcLukas Wunner
IFB originally depended on NET_CLS_ACT for traffic redirection. But since v4.5, that may be achieved with NFT_FWD_NETDEV as well. Fixes: 39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: <stable@vger.kernel.org> # v4.5+: bcfabee1afd9: netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26net: ax88796c: Remove pointless check in ax88796c_open()Nathan Chancellor
Clang warns: drivers/net/ethernet/asix/ax88796c_main.c:851:24: error: address of array 'ax_local->phydev->advertising' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] if (ax_local->phydev->advertising && ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ ~~ advertising cannot be NULL here if ax_local is not NULL, which cannot happen due to the check in ax88796c_probe(). Remove the check. Link: https://github.com/ClangBuiltLinux/linux/issues/1492 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26net: ax88796c: Fix clang -Wimplicit-fallthrough in ax88796c_set_mac()Nathan Chancellor
Clang warns: drivers/net/ethernet/asix/ax88796c_main.c:696:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough] case SPEED_10: ^ drivers/net/ethernet/asix/ax88796c_main.c:696:2: note: insert 'break;' to avoid fall-through case SPEED_10: ^ break; drivers/net/ethernet/asix/ax88796c_main.c:706:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough] case DUPLEX_HALF: ^ drivers/net/ethernet/asix/ax88796c_main.c:706:2: note: insert 'break;' to avoid fall-through case DUPLEX_HALF: ^ break; Clang is a little more pedantic than GCC, which permits implicit fallthroughs to cases that contain just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst, which states that all switch/case blocks must end in either break, fallthrough, continue, goto, or return. Add the missing breaks to fix the warning. Link: https://github.com/ClangBuiltLinux/linux/issues/1491 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26net: mana: Allow setting the number of queues while the NIC is downHaiyang Zhang
The existing code doesn't allow setting the number of queues while the NIC is down. Update the ethtool handler functions to support setting the number of queues while the NIC is at down state. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26mlxsw: spectrum_router: Expose RIF MAC profiles to devlink resourceDanielle Ratson
Expose via devlink-resource the maximum number of RIF MAC profiles and their current occupancy, so it can be used for debug and writing generic tests, like in the next patch. Example for Spectrum-2 output: $ devlink resource show pci/0000:06:00.0 ... name rif_mac_profiles size 4 occ 0 unit entry dpipe_tables none Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26mlxsw: spectrum_router: Add RIF MAC profiles supportDanielle Ratson
Currently, mlxsw enforces that all the router interfaces (RIFs) have the same MAC prefix. Relax this limitation by using RIF MAC profiles. Each profile is associated with a particular MAC prefix and multiple RIFs can use the same profile. Therefore, the number of possible MAC prefixes is no longer one, but the number of profiles supported by the device. Store the profiles in an IDR and reference count them according to the number of RIFs using them. Associate a RIF with a profile when the RIF is created and remove the association when the RIF is deleted. Change the association following 'NETDEV_CHANGEADDR' events, except when only one RIF is using the profile. In which case, change the MAC prefix of the profile itself instead of associating the RIF with a new profile. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26mlxsw: spectrum_router: Propagate extack furtherDanielle Ratson
The next patch will set the MAC profile of a router interface (RIF) as part of its configure() callback. The operation can fail in case the maximum number of profiles was exceeded. Add extack to mlxsw_sp_rif_ops::configure() in order to communicate such failures to user space. In addition, the MAC profile of a RIF can change following a 'NETDEV_CHANGEADDR' notification. Propagate extack to mlxsw_sp_router_port_change_event() so that failures could be communicated in this path as well. No functional changes intended. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26mlxsw: resources: Add resource identifier for RIF MAC profilesDanielle Ratson
Add a resource identifier for maximum RIF MAC profiles so that it could be later used to query the information from firmware. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26mlxsw: reg: Add MAC profile ID field to RITR registerDanielle Ratson
Add MAC profile ID field to RITR register so that it could be used for associating a RIF with a MAC profile ID by a later patch. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-25 This series contains updates to ice driver only. Dave adds event handler for LAG NETDEV_UNREGISTER to unlink device from link aggregate. Yongxin Liu adds a check for PTP support during release which would cause a call trace on non-PTP supported devices. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26vrf: run conntrack only in context of lower/physdev for locally generated ↵Florian Westphal
packets The VRF driver invokes netfilter for output+postrouting hooks so that users can create rules that check for 'oif $vrf' rather than lower device name. This is a problem when NAT rules are configured. To avoid any conntrack involvement in round 1, tag skbs as 'untracked' to prevent conntrack from picking them up. This gets cleared before the packet gets handed to the ip stack so conntrack will be active on the second iteration. One remaining issue is that a rule like output ... oif $vrfname notrack won't propagate to the second round because we can't tell 'notrack set via ruleset' and 'notrack set by vrf driver' apart. However, this isn't a regression: the 'notrack' removal happens instead of unconditional nf_reset_ct(). I'd also like to avoid leaking more vrf specific conditionals into the netfilter infra. For ingress, conntrack has already been done before the packet makes it to the vrf driver, with this patch egress does connection tracking with lower/physical device as well. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26Merge tag 'mlx5-updates-2021-10-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-10-25 Misc updates for mlx5 driver: 1) Misc updates and cleanups: - Don't write directly to netdev->dev_addr, From Jakub Kicinski - Remove unnecessary checks for slow path flag in tc module - Fix unused function warning of mlx5i_flow_type_mask - Bridge, support replacing existing FDB entry 2) Sub Functions, Reduction in memory usage: - Reduce flow counters bulk query buffer size - Implement max_macs devlink parameter - Add devlink vendor params to control Event Queue sizes - Added SF life cycle trace points by Parav/ 3) From Aya, Firmware health buffer reporting improvements - Print health buffer by log level and more missing information - Periodic update of host time to firmware ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: qed_dev: fix check of true !rc expressionJean Sacren
Remove the check of !rc in (!rc && !resc_lock_params.b_granted) since it is always true. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net: qed_ptp: fix check of true !rc expressionJean Sacren
Remove the check of !rc in (!rc && !params.b_granted) since it is always true. We should also use constant 0 for return. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25mlxsw: pci: Recycle received packet upon allocation failureIdo Schimmel
When the driver fails to allocate a new Rx buffer, it passes an empty Rx descriptor (contains zero address and size) to the device and marks it as invalid by setting the skb pointer in the descriptor's metadata to NULL. After processing enough Rx descriptors, the driver will try to process the invalid descriptor, but will return immediately seeing that the skb pointer is NULL. Since the driver no longer passes new Rx descriptors to the device, the Rx queue will eventually become full and the device will start to drop packets. Fix this by recycling the received packet if allocation of the new packet failed. This means that allocation is no longer performed at the end of the Rx routine, but at the start, before tearing down the DMA mapping of the received packet. Remove the comment about the descriptor being zeroed as it is no longer correct. This is OK because we either use the descriptor as-is (when recycling) or overwrite its address and size fields with that of the newly allocated Rx buffer. The issue was discovered when a process ("perf") consumed too much memory and put the system under memory pressure. It can be reproduced by injecting slab allocation failures [1]. After the fix, the Rx queue no longer comes to a halt. [1] # echo 10 > /sys/kernel/debug/failslab/times # echo 1000 > /sys/kernel/debug/failslab/interval # echo 100 > /sys/kernel/debug/failslab/probability FAULT_INJECTION: forcing a failure. name failslab, interval 1000, probability 100, space 0, times 8 [...] Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 should_fail.cold+0x32/0x37 should_failslab+0x5/0x10 kmem_cache_alloc_node+0x23/0x190 __alloc_skb+0x1f9/0x280 __netdev_alloc_skb+0x3a/0x150 mlxsw_pci_rdq_skb_alloc+0x24/0x90 mlxsw_pci_cq_tasklet+0x3dc/0x1200 tasklet_action_common.constprop.0+0x9f/0x100 __do_softirq+0xb5/0x252 irq_exit_rcu+0x7a/0xa0 common_interrupt+0x83/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 RIP: 0010:cpuidle_enter_state+0xc8/0x340 [...] mlxsw_spectrum2 0000:06:00.0: Failed to alloc skb for RDQ Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20211024064014.1060919-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25ax88796c: fix fetching error stats from percpu containersAlexander Lobakin
rx_dropped, tx_dropped, rx_frame_errors and rx_crc_errors are being wrongly fetched from the target container rather than source percpu ones. No idea if that goes from the vendor driver or was brainoed during the refactoring, but fix it either way. Fixes: a97c69ba4f30e ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20211023121148.113466-1-alobakin@pm.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net/mlx5: SF_DEV Add SF device trace pointsParav Pandit
Add SF device add and delete specific trace points. echo mlx5:mlx5_sf_dev_add >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_dev_del >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_vhca_event >> /sys/kernel/debug/tracing/set_event Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: SF, Add SF trace pointsParav Pandit
Add support for trace events for SFs to improve debugging. This covers (a) port add and free trace points (b) device level trace points (c) SF hardware context add, free trace points. (d) SF function activate/deacticate and state trace points SF events examples: echo mlx5:mlx5_sf_add >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_free >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_hwc_alloc >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_hwc_free >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_hwc_deferred_free >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_update_state >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_activate >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_deactivate >> /sys/kernel/debug/tracing/set_event Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Let user configure max_macs paramShay Drory
Currently, max_macs is taking 70Kbytes of memory per function. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the number of max_macs. For example, to reduce the number of max_macs to 1, execute:: $ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \ cmode driverinit $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Let user configure event_eq_size paramShay Drory
Event EQ is an EQ which received the notification of almost all the events generated by the NIC. Currently, each event EQ is taking 512KB of memory. This size is not needed in most use cases, and is critical with large scale. Hence, allow user to configure the size of the event EQ. For example to reduce event EQ size to 64, execute:: $ devlink resource set pci/0000:00:0b.0 path /event_eq_size/ size 64 $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Let user configure io_eq_size paramShay Drory
Currently, each I/O EQ is taking 128KB of memory. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the size of I/O EQs. For example, to reduce I/O EQ size to 64, execute: $ devlink resource set pci/0000:00:0b.0 path /io_eq_size/ size 64 $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Bridge, support replacing existing FDB entryVlad Buslov
The SWITCHDEV_FDB_ADD_TO_DEVICE is used for both adding new and replacing existing entry. Implement support for replacing existing FDB entries in mlx5 offload code. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Bridge, extract code to lookup and del/notify entryVlad Buslov
Following two patterns in bridge code are used in multiple places where similar code is duplicated: - Lookup FDB entry from hashtable by address+vid pair. - Notify software bridge and then delete existing FDB entry. In order to improve code quality and prepare for following patch series that also uses described patterns, extract the codes to dedicated helper functions. This commit doesn't change functionality. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Add periodic update of host time to firmwareAya Levin
Firmware logs its asserts also to non-volatile memory. In order to reduce drift between the NIC and the host, the driver sets the host epoch-time to the firmware every hour. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Print health buffer by log levelAya Levin
Add log macro which gets log level as a parameter. Use the severity read from the health buffer and the new log macro to log the health buffer with severity as log level. Prior to this patch, health buffer was printed in error log level regardless of its severity. Now the user may filter dmesg (--level) or change kernel log level to focus on different severity levels of firmware errors. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Extend health buffer dumpAya Levin
Enhance health buffer to include: - assert_var5: expose the 6'th assert variable. - time: error's time-stamp in seconds (epoch time). - rfr: Recovery Flow Requiered. When set, indicates that the error cannot be recovered without flow involving reset. - severity: error's severity value, ranging from emergency to debug. Expose them in the health buffer dump (dmesg and devlink fw reporter). Health buffer in dmesg: mlx5_core 0000:08:00.0: print_health_info:425:(pid 912): Health issue observed, firmware internal error, severity(3) ERROR: mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[0] 0x08040700 mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[1] 0x00000000 mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[2] 0x00000000 mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[3] 0x00000000 mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[4] 0x00000000 mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[5] 0x00000000 mlx5_core 0000:08:00.0: print_health_info:432:(pid 912): assert_exit_ptr 0x00aaf800 mlx5_core 0000:08:00.0: print_health_info:434:(pid 912): assert_callra 0x00aaf70c mlx5_core 0000:08:00.0: print_health_info:436:(pid 912): fw_ver 16.32.492 mlx5_core 0000:08:00.0: print_health_info:437:(pid 912): time 1634819758 mlx5_core 0000:08:00.0: print_health_info:438:(pid 912): hw_id 0x0000020d mlx5_core 0000:08:00.0: print_health_info:439:(pid 912): rfr 0 mlx5_core 0000:08:00.0: print_health_info:440:(pid 912): severity 3 (ERROR) mlx5_core 0000:08:00.0: print_health_info:441:(pid 912): irisc_index 9 mlx5_core 0000:08:00.0: print_health_info:442:(pid 912): synd 0x1: firmware internal error mlx5_core 0000:08:00.0: print_health_info:444:(pid 912): ext_synd 0x802b mlx5_core 0000:08:00.0: print_health_info:445:(pid 912): raw fw_ver 0x102001ec Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Reduce flow counters bulk query buffer size for SFsAvihai Horon
Currently, the flow counters bulk query buffer takes a little more than 512KB of memory, which is aligned to the next power of 2, to 1MB. The buffer size determines the maximum number of flow counters that can be queried at a time. Thus, having a bigger buffer can improve performance for users that need to query many flow counters. SFs don't use many flow counters and don't need a big buffer. Since this size is critical with large scale, reduce the size of the bulk query buffer for SFs. Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Fix unused function warning of mlx5i_flow_type_maskShay Drory
The cited commit is causing unused-function warning[1] when CONFIG_MLX5_EN_RXNFC is not set. Fix this by moving the function into the ifdef, where it's only used [1] warning: ‘mlx5i_flow_type_mask’ defined but not used [-Wunused-function] Fixes: 9fbe1c25ecca ("net/mlx5i: Enable Rx steering for IPoIB via ethtool") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Remove unnecessary checks for slow path flagPaul Blakey
After previous changes, caller (mlx5e_tc_offload_fdb_rules()) already checks for the slow path flag, and if set won't call offload/unoffload sample. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5e: don't write directly to netdev->dev_addrJakub Kicinski
Use a local buffer and eth_hw_addr_set() Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25ice: check whether PTP is initialized in ice_ptp_release()Yongxin Liu
PTP is currently only supported on E810 devices, it is checked in ice_ptp_init(). However, there is no check in ice_ptp_release(). For other E800 series devices, ice_ptp_release() will be wrongly executed. Fix the following calltrace. INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Workqueue: ice ice_service_task [ice] Call Trace: dump_stack_lvl+0x5b/0x82 dump_stack+0x10/0x12 register_lock_class+0x495/0x4a0 ? find_held_lock+0x3c/0xb0 __lock_acquire+0x71/0x1830 lock_acquire+0x1e6/0x330 ? ice_ptp_release+0x3c/0x1e0 [ice] ? _raw_spin_lock+0x19/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] _raw_spin_lock+0x38/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] ice_ptp_release+0x3c/0x1e0 [ice] ice_prepare_for_reset+0xcb/0xe0 [ice] ice_do_reset+0x38/0x110 [ice] ice_service_task+0x138/0xf10 [ice] ? __this_cpu_preempt_check+0x13/0x20 process_one_work+0x26a/0x650 worker_thread+0x3f/0x3b0 ? __kthread_parkme+0x51/0xb0 ? process_one_work+0x650/0x650 kthread+0x161/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-25ice: Respond to a NETDEV_UNREGISTER event for LAGDave Ertman
When the PF is a member of a link aggregate, and the driver is removed, the process will hang unless we respond to the NETDEV_UNREGISTER event that is sent to the event_handler for LAG. Add a case statement for the ice_lag_event_handler to unlink the PF from the link aggregate. Also remove code that was incorrectly applying a dev_hold to peer_netdevs that were associated with the ice driver. Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-25fddi: defza: add missing pointer type castJakub Kicinski
hw_addr is a uint AKA unsigned int. dev_addr_set() takes a u8 *. drivers/net/fddi/defza.c:1383:27: error: passing argument 2 of 'dev_addr_set' from incompatible pointer type [-Werror=incompatible-pointer-types] Reported-by: kernel test robot <lkp@intel.com> Fixes: 1e9258c389ee ("fddi: defxx,defza: use dev_addr_set()") Acked-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/20211025160000.2803818-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25xen/netfront: stop tx queues during live migrationDongli Zhang
The tx queues are not stopped during the live migration. As a result, the ndo_start_xmit() may access netfront_info->queues which is freed by talk_to_netback()->xennet_destroy_queues(). This patch is to netif_device_detach() at the beginning of xen-netfront resuming, and netif_device_attach() at the end of resuming. CPU A CPU B talk_to_netback() -> if (info->queues) xennet_destroy_queues(info); to free netfront_info->queues xennet_start_xmit() to access netfront_info->queues -> err = xennet_create_queues(info, &num_queues); The idea is borrowed from virtio-net. Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25mlxsw: spectrum: Use 'bitmap_zalloc()' when applicableChristophe JAILLET
Use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: nxp: lpc_eth.c: avoid hang when bringing interface downTrevor Woerner
A hard hang is observed whenever the ethernet interface is brought down. If the PHY is stopped before the LPC core block is reset, the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I re-arranged the ordering of the functions calls in lpc_eth_close() to reset the hardware before stopping the PHY. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Trevor Woerner <twoerner@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25usbb: catc: use correct API for MAC addressesOliver Neukum
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. In the case of catc we need a new temporary buffer to conform to the rules for DMA coherency. That in turn necessitates a reworking of error handling in probe(). Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25wcn36xx: Fix tx_status mechanismLoic Poulain
This change fix the TX ack mechanism in various ways: - For NO_ACK tagged packets, we don't need to wait for TX_ACK indication and so are not subject to the single packet ack limitation. So we don't have to stop the tx queue, and can call the tx status callback as soon as DMA transfer has completed. - Fix skb ownership/reference. Only start status indication timeout once the DMA transfer has been completed. This avoids the skb to be both referenced in the DMA tx ring and by the tx_ack_skb pointer, preventing any use-after-free or double-free. - This adds a sanity (paranoia?) check on the skb tx ack pointer. - Resume TX queue if TX status tagged packet TX fails. Cc: stable@vger.kernel.org Fixes: fdf21cc37149 ("wcn36xx: Add TX ack support") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1634567281-28997-1-git-send-email-loic.poulain@linaro.org
2021-10-25wcn36xx: Fix (QoS) null data frame bitrate/modulationLoic Poulain
We observe unexpected connection drops with some APs due to non-acked mac80211 generated null data frames (keep-alive). After debugging and capture, we noticed that null frames are submitted at standard data bitrate and that the given APs are in trouble with that. After setting the null frame bitrate to control bitrate, all null frames are acked as expected and connection is maintained. Not sure if it's a requirement of the specification, but it seems the right thing to do anyway, null frames are mostly used for control purpose (power-saving, keep-alive...), and submitting them with a slower/simpler bitrate/modulation is more robust. Cc: stable@vger.kernel.org Fixes: 512b191d9652 ("wcn36xx: Fix TX data path") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1634560399-15290-1-git-send-email-loic.poulain@linaro.org
2021-10-25Merge tag 'wireless-drivers-next-2021-10-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.16 Third set of patches for v5.16. This time we have a small one to quickly fix two mt76 build failures I had missed in my previous pull request. Major changes: mt76 * fix linking when CONFIG_MMC is disabled * fix dev_err() format warning * mt7615: mt7622: fix ibss and meshpoint ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25gve: Add a jumbo-frame device option.Shailend Chand
A widely deployed driver has a bug that will cause the driver not to load when a max_mtu > 2048 is present in the device descriptor. To avoid this bug while still enabling jumbo frames, we present a lower max_mtu in the device descriptor and pass the actual max_mtu in a separate device option. The driver supports 2 different queue formats. To enable features on one queue format, but not the other, a supported_features mask was added to the device options in the device descriptor. Signed-off-by: Shailend Chand <shailend@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25gve: Implement packet continuation for RX.David Awogbemila
This enables the driver to receive RX packets spread across multiple buffers: For a given multi-fragment packet the "packet continuation" bit is set on all descriptors except the last one. These descriptors' payloads are combined into a single SKB before the SKB is handed to the networking stack. This change adds a "packet buffer size" notion for RX queues. The CreateRxQueue AdminQueue command sent to the device now includes the packet_buffer_size. We opt for a packet_buffer_size of PAGE_SIZE / 2 to give the driver the opportunity to flip pages where we can instead of copying. Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25gve: Add RX context.David Awogbemila
This refactor moves the skb_head and skb_tail fields into a new gve_rx_ctx struct. This new struct will contain information about the current packet being processed. This is in preparation for multi-descriptor RX packets. Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_set: Lock the PHY while changing settingsAndrew Lunn
There is a race condition where the PHY state machine can change members of the phydev structure at the same time userspace requests a change via ethtool. To prevent this, have phy_ethtool_ksettings_set take the PHY lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Reported-by: Walter Stoll <Walter.Stoll@duagon.com> Suggested-by: Walter Stoll <Walter.Stoll@duagon.com> Tested-by: Walter Stoll <Walter.Stoll@duagon.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_start_aneg: Add an unlocked versionAndrew Lunn
Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_set: Move after phy_start_anegAndrew Lunn
This allows it to make use of a helper which assume the PHY is already locked. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_get: Lock the phy for consistencyAndrew Lunn
The PHY structure should be locked while copying information out if it, otherwise there is no guarantee of self consistency. Without the lock the PHY state machine could be updating the structure. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25ath10k: fix module load regression with iram-recovery featureAbinaya Kalaiselvan
Commit 9af7c32ceca8 ("ath10k: add target IRAM recovery feature support") introduced a new firmware feature flag ATH10K_FW_FEATURE_IRAM_RECOVERY. But this caused ath10k_pci module load to fail if ATH10K_FW_CRASH_DUMP_RAM_DATA bit was not enabled in the ath10k coredump_mask module parameter: [ 2209.328190] ath10k_pci 0000:02:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe [ 2209.434414] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 [ 2209.547191] ath10k_pci 0000:02:00.0: firmware ver 10.4-3.9.0.2-00099 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery crc32 cbade90a [ 2210.896485] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id 0:1 crc32 a040efc2 [ 2213.603339] ath10k_pci 0000:02:00.0: failed to copy target iram contents: -12 [ 2213.839027] ath10k_pci 0000:02:00.0: could not init core (-12) [ 2213.933910] ath10k_pci 0000:02:00.0: could not probe fw (-12) And by default coredump_mask does not have ATH10K_FW_CRASH_DUMP_RAM_DATA enabled so anyone using a firmware with iram-recovery feature would fail. To my knowledge only QCA9984 firmwares starting from release 10.4-3.9.0.2-00099 enabled the feature. The reason for regression was that ath10k_core_copy_target_iram() used ath10k_coredump_get_mem_layout() to get the memory layout, but when ATH10K_FW_CRASH_DUMP_RAM_DATA was disabled it would get just NULL and bail out with an error. While looking at all this I noticed another bug: if CONFIG_DEV_COREDUMP is disabled but the firmware has iram-recovery enabled the module load fails with similar error messages. I fixed that by returning 0 from ath10k_core_copy_target_iram() when _ath10k_coredump_get_mem_layout() returns NULL. Tested-on: QCA9984 hw2.0 PCI 10.4-3.9.0.2-00139 Fixes: 9af7c32ceca8 ("ath10k: add target IRAM recovery feature support") Signed-off-by: Abinaya Kalaiselvan <akalaise@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211020075054.23061-1-kvalo@codeaurora.org
2021-10-25net: phy: add qca8081 cdt featureLuo Jie
To perform CDT of qca8081 phy: 1. disable hibernation. 2. force phy working in MDI mode. 3. force phy working in 1000BASE-T mode. 4. configure the related thresholds. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-29 22:53:23 +0000