summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-10-03be2net: Change the data type of the 'on die temperature' stat.Somnath Kotur
This was showing up as junk value on PPC /Big endian machines since it was marked as a byte. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03be2net: Add 60 second delay to allow FAT dump completion on recovery from EEHSomnath Kotur
Add 60s delay before timeout on polling Bit 31 so that FAT dump can complete when reset occurs. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03ath6kl: include vmalloc.h in debug.cKalle Valo
Fixes compilation errors when compiling for ARM: ath6kl/debug.c:312: error: implicit declaration of function 'vmalloc' ath6kl/debug.c:312: warning: assignment makes pointer from integer without a cast ath6kl/debug.c:342: error: implicit declaration of function 'vfree' ath6kl/debug.c:696: warning: assignment makes pointer from integer without a cast ath6kl/debug.c:871: warning: assignment makes pointer from integer without a cast Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-10-01ath6kl: fix size_t related warningsKalle Valo
My earlier debug log additions added these warnings when compiling 64 bit kernels: ath6kl/init.c:962: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:975: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:988: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:1009: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:1192: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' ath6kl/init.c:1236: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' ath6kl/init.c:1267: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Reported-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-30netdev/phy/icplus: Use mdiobus_write() and mdiobus_read() for proper locking.David Daney
Usually you have to take the bus lock. Why not here too? I saw this when working on something else. Not even compile tested. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Greg Dietsche <Gregory.Dietsche@cuw.edu> Cc: "Uwe Kleine-Konig" <u.kleine-koenig@pengutronix.de> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30netdev/phy: Use mdiobus_read() so that proper locks are taken.David Daney
Accesses to the mdio busses must be done with the mdio_lock to ensure proper operation. Conveniently we have the helper function mdiobus_read() to do that for us. Lets use it in get_phy_id() instead of accessing the bus without the lock held. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30mac80211: implement uAPSDJohannes Berg
Add uAPSD support to mac80211. This is probably not possible with all devices, so advertising it with the cfg80211 flag will be left up to drivers that want it. Due to my previous patches it is now a fairly straight-forward extension. Drivers need to have accurate TX status reporting for the EOSP frame. For drivers that buffer themselves, the provided APIs allow releasing the right number of frames, but then drivers need to set EOSP and more-data themselves. This is documented in more detail in the new code itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: let drivers inform it about per TID buffered framesJohannes Berg
For uAPSD implementation, it is necessary to know on which ACs frames are buffered. mac80211 obviously knows about the frames it has buffered itself, but with aggregation many drivers buffer frames. Thus, mac80211 needs to be informed about this. For now, since we don't have APSD in any form, this will unconditionally set the TIM bit for the station but later with uAPSD only some ACs might cause the TIM bit to be set. ath9k is the only driver using this API and I only modify it in the most basic way, it won't be able to implement uAPSD with this yet. But it can't do that anyway since there's no way to selectively release frames to the peer yet. Since drivers will buffer frames per TID, let them inform mac80211 on a per TID basis, mac80211 will then sort out the AC mapping itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30iwlagn: iwl-agn-rs: remove unnecessary null check for sta and lq_staGreg Dietsche
both sta and lq_sta are guaranteed to be not null in the calling function so we don't need to check them here. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k/ath9k_htc: Fix PS wrappers for RF killMohammed Shafi Shajakhan
ath9k_hw_gpio_get reads the GPIO in/out registers to get the status of GPIO pins, so use PS wrappers Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30rtlwifi: Remove unused _usb_nbytes_read_write and _usb_writeN_syncLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30rtlwifi: Remove unused routine _usb_readN_syncLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: add cfg80211 handlers add/del_virtual_intfYogesh Ashok Powar
Making adding and deleting virtual interfaces dynamic. Adding handlers for creating and deleting virtual interface with given name and dev respectively. Also, creating default interface of type station on insmod of the driver. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: fix Tx data rate display issueAmitkumar Karwar
"iw dev mlan0 link" shows wrong data rate, because data rate is not sent properly to cfg80211 stack. Also stack is not updated with mcs and Tx data flags information. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: remove unreachable codeAmitkumar Karwar
In disconnected state "iw dev mlan0 link" command will return from cfg80211 stack itself. We also have an error check in mwifiex_cfg80211_get_station() routine. Therefore the code under "if (!priv->media_connected)" condition in mwifiex_rate_ioctl_get_rate_value() routine becomes unreachable. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: remove unnecessary mwifiex_dump_station_info() callAmitkumar Karwar
An extra call to mwifiex_dump_station_info() routine in get_station callback function is redundant Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k: Remove redundant my beacon check at ath_rx_ps_beaconRajkumar Manoharan
Make use of the rx status's is_mybeacon in order to avoid redundant memcmp. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k: Remove unnecessary AMPDU check at tx statusRajkumar Manoharan
Fill the ampdu_[ack]_len for both aggregation and normal frames. So that we could avoid unnecesary conditional at tx status. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30wireless: at76c50x: use native hex_pack_byte() methodAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "John W. Linville" <linville@tuxdriver.com> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/wl12xx/main.c
2011-09-29bna: Driver Version changed to 3.0.2.2Rasesh Mody
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Add Callback to Fix RXQ StopRasesh Mody
Change details: - Add a callback in the BNA, which is called before sending FW command to stop RxQs. After this callback is called, driver should not post anymore Rx buffers to the RxQ. This addresses a small window where driver posts Rx buffers while FW is stopping/has stopped the RxQ. - Registering callback function, rx_stall_cbfn, during bna_rx_create. Invoking callback function, rx_stall_cbfn, before sending rx_cfg_clr command to FW - Bnad_cb_rx_stall implementation - set a flag in the Rxq to mark buffer posting disabled state. While posting buffers check for the above flag. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: PLL Init Fix and Add Stats AttributesRasesh Mody
Change details: - Fix to release soft reset in PLL init for HW - Added stats attributes and new bfi msg class - Removed some unused code and typo fixes Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Brocade 1860 HW EnablementRasesh Mody
This patch enables new HW Brocade 1860. Add BFA_CM_NIC capability mask to bfa_ioc_attr, Sub-System Device ID Info and support for Brocade 1860 device ID to bfa_ioc.c and bnad.c. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Implement FW Download for New HWRasesh Mody
Add new device ID 0x22 and new asic generation BFI_ASIC_GEN_CT2 for 1860. Implement FW download from user space for new Brocade HW. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Capability Map and MFG Block Changes for New HWRasesh Mody
Add capability map and generic model name scheme for manufacturing block. Add card types for new HW. Remove bfa_mfg_is_card_type_valid and ibfa_mfg_adapter_prop_init_flash_ct macros. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Brocade 1860 IOC PLL, Reg Defs and ASIC Mode ChangesRasesh Mody
Add logic to set ASIC specfic interface in IOC, HW interface initialization APIs, mode based initialization and MSI-X resource allocation for 1860 with no asic block. Add new h/w specific register definitions and setup registers used by IOC logic. Use normal kernel declaration style, c99 initializers and const for mailbox structures. Remove unneeded parentheses. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29Merge git://github.com/Jkirsher/net-nextDavid S. Miller
2011-09-29usbnet: add timestamping supportMichael Riesch
In order to make USB-to-Ethernet-adapters (depending on usbnet) support timestamping, the "skb_defer_rx_timestamp" and "skb_tx_timestamp" function calls are added. Signed-off-by: Michael Riesch <michael@riesch.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29net/fec: add poll controller function for fec nicXiao Jiang
Add poll controller function for fec nic. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29net/fec: replace hardcoded irq num with macroXiao Jiang
Don't use hardcoded irq num and replace it with FEC_IRQ_NUM macro. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28ixgbe: add ECC warning for legacy interruptsDon Skidmore
Noticed that the legacy Interrupt handler didn't have the same ECC warning as did the MSI. So this patch adds it. Signed-off-by: Don Skidmore <donald.c.skidmore> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-28ixgbe: cleanup ixgbe_setup_gpie() for X540Don Skidmore
The X540 thermal sensor interrupt isn't a General Purpose Interrupt so doesn't need to be enabled in ixgbe_setup_gpie(). Likewise X540 doesn't use the SDP0 for thermal sensor so it doesn't need to be enabled for any device other than 82599. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-28ixgbe add thermal sensor support for x540 hardwareJacob Keller
Add code to enable thermal sensors for the x540 hardware, as well as a thermal interrupt check which will exit with a critical message of a thermal overheat is detected. Intent of code allows other mac types to be added with different configuration in the future. Fixed in this version is the addition of setting the temp_sensor capable flag which was previously only set for a specific mac. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-28ixgbe: update {P}FC thresholds to account for X540 and loopbackJohn Fastabend
Revise high and low threshold marks wrt flow control to account for the X540 devices and latency introduced by the loopback switch. Without this it was in theory possible to drop frames on a supposedly lossless link with X540 or SR-IOV enabled. Previously we used a magic number in a define to calculate the threshold values. This made it difficult to sort out exactly which latencies were or were not being accounted for. Here I was overly explicit and tried to used #define names that would be recognizable after reading the IEEE 802.1Qbb specification. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-28ixgbe: disable LLI for FCoEVasu Dev
Disable LLI for FCoE since regular interrupt and their moderation rate works slightly better for FCoE also. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-28ixgbe: Cleanup q_vector interrupt throttle rate logicEmil Tantilov
This patch is meant to help cleanup the interrupt throttle rate logic by storing the interrupt throttle rate as a value in microseconds instead of interrupts per second. The advantage to this approach is that the value can now be stored in an 16 bit field and doesn't require as much math to flip the value back and forth since the hardware already used microseconds when setting the rate. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-28ixgbevf: Fix broken trunk vlanGreg Rose
Changes to clean up the vlan rx path broke trunk vlan. Trunk vlans in a VF driver are those set using: "ip link set <pfdev> vf <n> <vlanid>" Signed-off-by: Greg Rose <gregory.v.rose@intel.com> CC: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-28e1000: don't enable dma receives until after dma address has been setupDean Nelson
Doing an 'ifconfig ethN down' followed by an 'ifconfig ethN up' on a qemu-kvm guest system configured with two e1000 NICs can result in an 'unable to handle kernel paging request at 0000000100000000' or 'bad page map in process ...' or something similar. These result from a 4096-byte page being corrupted with the following two-word pattern (16-bytes) repeated throughout the entire page: 0x0000000000000000 0x0000000100000000 There can be other bits set as well. What is a constant is that the 2nd word has the 32nd bit set. So one could see: : 0x0000000000000000 0x0000000100000000 0x0000000000000000 0x0000000172adc067 <<< bad pte 0x800000006ec60067 0x0000000700000040 0x0000000000000000 0x0000000100000000 : Which came from from a process' page table I dumped out when the marked line was seen as bad by print_bad_pte(). The repeating pattern represents the e1000's two-word receive descriptor: struct e1000_rx_desc { __le64 buffer_addr; /* Address of the descriptor's data buffer */ __le16 length; /* Length of data DMAed into data buffer */ __le16 csum; /* Packet checksum */ u8 status; /* Descriptor status */ u8 errors; /* Descriptor Errors */ __le16 special; }; And the 32nd bit of the 2nd word maps to the 'u8 status' member, and corresponds to E1000_RXD_STAT_DD which indicates the descriptor is done. The corruption appears to result from the following... . An 'ifconfig ethN down' gets us into e1000_close(), which through a number of subfunctions results in: 1. E1000_RCTL_EN being cleared in RCTL register. [e1000_down()] 2. dma_free_coherent() being called. [e1000_free_rx_resources()] . An 'ifconfig ethN up' gets us into e1000_open(), which through a number of subfunctions results in: 1. dma_alloc_coherent() being called. [e1000_setup_rx_resources()] 2. E1000_RCTL_EN being set in RCTL register. [e1000_setup_rctl()] 3. E1000_RCTL_EN being cleared in RCTL register. [e1000_configure_rx()] 4. RDLEN, RDBAH and RDBAL registers being set to reflect the dma page allocated in step 1. [e1000_configure_rx()] 5. E1000_RCTL_EN being set in RCTL register. [e1000_configure_rx()] During the 'ifconfig ethN up' there is a window opened, starting in step 2 where the receives are enabled up until they are disabled in step 3, in which the address of the receive descriptor dma page known by the NIC is still the previous one which was freed during the 'ifconfig ethN down'. If this memory has been reallocated for some other use and the NIC feels so inclined, it will write to that former dma page with predictably unpleasant results. I realize that in the guest, we're dealing with an e1000 NIC that is software emulated by qemu-kvm. The problem doesn't appear to occur on bare-metal. Andy suspects that this is because in the emulator link-up is essentially instant and traffic can start flowing immediately. Whereas on bare-metal, link-up usually seems to take at least a few milliseconds. And this might be enough to prevent traffic from flowing into the device inside the window where E1000_RCTL_EN is set. So perhaps a modification needs to be made to the qemu-kvm e1000 NIC emulator to delay the link-up. But in defense of the emulator, it seems like a bad idea to enable dma operations before the address of the memory to be involved has been made known. The following patch no longer enables receives in e1000_setup_rctl() but leaves them however they were. It only enables receives in e1000_configure_rx(), and only after the dma address has been made known to the hardware. There are two places where e1000_setup_rctl() gets called. The one in e1000_configure() is followed immediately by a call to e1000_configure_rx(), so there's really no change functionally (except for the removal of the problem window. The other is in __e1000_shutdown() and is not followed by a call to e1000_configure_rx(), so there is a change functionally. But consider... . An 'ifconfig ethN down' (just as described above). . A 'suspend' of the system, which (I'm assuming) will find its way into e1000_suspend() which calls __e1000_shutdown() resulting in: 1. E1000_RCTL_EN being set in RCTL register. [e1000_setup_rctl()] And again we've re-opened the problem window for some unknown amount of time. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-29ibmveth: Fix oops on request_irq failureBrian King
If request_irq fails, the ibmveth driver will overwrite the rc and end up returning a successful rc on its open function, resulting in an oops later when a packet gets sent and buffers are not allocated due to the failed open. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29cxgb4: Fix EEH on IBM P7IOCDivy Le Ray
Fix EEH recovery on new P Series platform by requesting fundamental reset. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29dp83640: reduce driver noiseRichard Cochran
The driver has two warning messages that might be triggered by normal use cases. When they appear, the messages give the impression of a never ending series of errors. This commit changes them to debug messages instead. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28candev: allow SJW user setting for bittiming calculationOliver Hartkopp
This patch adds support for SJW user settings to not set the synchronization jump width (SJW) to 1 in any case when using the in-kernel bittiming calculation. The ip-tool from iproute2 already supports to pass the user defined SJW value. The given SJW value is sanitized with the controller specific sjw_max and the calculated tseg2 value. As the SJW can have values up to 4 providing this value will lead to the maximum possible SJW automatically. A higher SJW allows higher controller oscillator tolerances. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28net: sh_eth: move the asm/sh_eth.h to include/linux/Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28net: sh_eth: use ioremap()Yoshihiro Shimoda
This patch also changes writel/readl to iowrite32/ioread32. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28can/sja1000: add driver for EMS PCMCIA cardOliver Hartkopp
This patch adds the driver for the SJA1000 based PCMCIA card 'CPC-Card' from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Markus Plessing <plessing@ems-wuensche.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28wireless/ath6kl: use of module_param requires the inclusion of moduleparam.hStephen Rothwell
Otheriwse the module.h split up fails like this: drivers/net/wireless/ath/ath6kl/init.c:27:26: error: expected ')' before 'uint' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-28ath6kl: improve wmi debug messagesKalle Valo
Add a new debug level ATH6KL_DBG_WMI_DUMP and other minor improvements to the wmi debug messages. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-28ath6kl: add debug logs for bootingKalle Valo
Just to make it easier to find out why boot fails. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-28ath6kl: add sdio debug messagesKalle Valo
Add extensive debug messages to sdio.c. Makes it easier to debug various problems. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-09-14 16:57:41 +0000