summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-04-21sr9700: use skb_cow_head() to deal with cloned skbsEric Dumazet
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21cx82310_eth: use skb_cow_head() to deal with cloned skbsEric Dumazet
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: cc28a20e77b2 ("introduce cx82310_eth: Conexant CX82310-based ADSL router USB ethernet driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21smsc75xx: use skb_cow_head() to deal with cloned skbsEric Dumazet
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21crypto: chcr - Fix txq ids.Harsh Jain
The patch fixes a critical issue to map txqid with flows on the hardware appropriately, if tx queues created are more than flows configured then txqid shall map within the range of hardware flows configured. This ensure that un-mapped txqid does not remain un-handled. The patch also segregated the rxqid and txqid for clarity. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Reviewed-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-20igbvf: Use net_device_stats from struct net_deviceTobias Klauser
Instead of using a private copy of struct net_device_stats in struct igbvf_adapter, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-20igb: Enable reading of wake up packetKim Tatt Chuah
Currently, in igb_resume(), igb driver ignores the Wake Up Status (WUS) and Wake Up Packet Memory (WUPM) registers. This patch enables the igb driver to read the WUPM if the controller was woken by a wake up packet that is not more than 128 bytes long (maximum WUPM size), then pass it up the kernel network stack. Signed-off-by: Kim Tatt Chuah <kim.tatt.chuah@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-20igb/igbvf: Add VF MAC filter request capabilitiesYury Kylulin
Add functionality for the VF to request up to 3 additional MAC filters. This is done using existing E1000_VF_SET_MAC_ADDR message, but with additional message info - E1000_VF_MAC_FILTER_CLR to clear all unicast MAC filters previously set for this VF and E1000_VF_MAC_FILTER_ADD to add MAC filter. Additional filters can be added only in case if administrator did not set VF MAC explicitly and allowed to change default MAC to the VF. Due to the limited number of RAR entries reserve at least 3 MAC filters for the PF. If SRIOV is supported by the NIC after this change RAR entries starting from 1 to (RAR MAX ENTRIES - NUM SRIOV VFS) will be used for PF and VF MAC filters. Signed-off-by: Yury Kylulin <yury.kylulin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-20igb: improve MAC filter handlingYury Kylulin
Using the work which was done for ixgbe driver by Jacob Keller commit 5d7daa35b9eb ("ixgbe: improve mac filter handling") and Alexander Duyck commit 0f079d22834a ("ixgbe: Use __dev_uc_sync and __dev_uc_unsync for unicast addresses") and out-of-tree igb driver add functionality to manage (add and delete) MAC filters. Signed-off-by: Yury Kylulin <yury.kylulin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-20e1000e: fix timing for 82579 Gigabit Ethernet controllerBernd Faust
After an upgrade to Linux kernel v4.x the hardware timestamps of the 82579 Gigabit Ethernet Controller are different than expected. The values that are being read are almost four times as big as before the kernel upgrade. The difference is that after the upgrade the driver sets the clock frequency to 25MHz, where before the upgrade it was set to 96MHz. Intel confirmed that the correct frequency for this network adapter is 96MHz. Signed-off-by: Bernd Faust <berndfaust@gmail.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-20ixgb: Omit private ndo_get_stats functionTobias Klauser
ixgb_get_stats() just returns dev->stats so we can leave it out altogether and let dev_get_stats() do the job. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-20e1000: Omit private ndo_get_stats functionTobias Klauser
e1000_get_stats() just returns dev->stats so we can leave it out altogether and let dev_get_stats() do the job. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-20qed: Fix issue in populating the PFC config paramters.sudarsana.kalluru@cavium.com
Change ieee_setpfc() callback implementation to populate traffic class count with the user provided value. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20qed: Fix possible system hang in the dcbnl-getdcbx() path.sudarsana.kalluru@cavium.com
qed_dcbnl_get_dcbx() API uses kmalloc in GFT_KERNEL mode. The API gets invoked in the interrupt context by qed_dcbnl_getdcbx callback. Need to invoke this kmalloc in atomic mode. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20qed: Fix sending an invalid PFC error mask to MFW.sudarsana.kalluru@cavium.com
PFC error-mask value is not supported by MFW, but this bit could be set in the pfc bit-map of the operational parameters if remote device supports it. These operational parameters are used as basis for populating the dcbx config parameters. User provided configs will be applied on top of these parameters and then send them to MFW when requested. Driver need to clear the error-mask bit before sending the config parameters to MFW. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20qed: Fix possible error in populating max_tc field.sudarsana.kalluru@cavium.com
Some adapters may not publish the max_tc value. Populate the default value for max_tc field in case the mfw didn't provide one. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20smsc95xx: Use skb_cow_head to deal with cloned skbsJames Hughes
The driver was failing to check that the SKB wasn't cloned before adding checksum data. Replace existing handling to extend/copy the header buffer with skb_cow_head. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net/mlx5e: IPoIB, Fix error handling in mlx5_rdma_netdev_alloc()Dan Carpenter
The labels were out of order, so it either could result in an Oops or a leak. Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20qede: allocate enough data for ->arfs_fltr_bmapDan Carpenter
We've got the number of longs, yes, but we should multiply by sizeof(long) to get the number of bytes needed. Fixes: e4917d46a653 ("qede: Add aRFS support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2017-04-18 This series contains updates to mainly ixgbe with only one ixgbevf change. Usha adds a check to ensure the creation of number of VF's is valid based on the traffic classes configured, all to avoid transmit hangs. Joe Perches reduces the use of pr_cont since the output can be interleaved by other processes. Tony cleans up the code overwriting the KX4 config, which is configured by the NVM. Adds a check for MMNGC.MNG_VETO, to resolve an issue where we were getting a link loss for the BMC when loading the driver. Don fixes up SGMII x553 config details which were missed in earlier implementations. Added support for x552 XFI backplane interface support. Cleaned up an unused define, which was causing confusion on supported devices. Emil fixes a link issue on KR parts by making sure the default setting is set. Refactors the code so that the code for allocating memory for the list of MAC addresses that the VFs can use into its own function. Made some code cleans to help readability and ensure notification of SRIOV being enabled is done upon completion. Fixed an issue where if we failed to allocate vfinfo in __ixgbe_enable_sriov() the driver would crash with a NULL pointer dereference. Philippe Reynes updates ixgbevf to use the new API for {get|set}_link_ksettings. Alex increases the headroom allocation when using build_skb() on a system with 4K pages. Fixed an issue in ixgbe_dump() where we were no longer clearing the status bit. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20dp83640: don't recieve time stamps twiceDan Carpenter
This patch is prompted by a static checker warning about a potential use after free. The concern is that netif_rx_ni() can free "skb" and we call it twice. When I look at the commit that added this, it looks like some stray lines were added accidentally. It doesn't make sense to me that we would recieve the same data two times. I asked the author but never recieved a response. I can't test this code, but I'm pretty sure my patch is correct. Fixes: 4b063258ab93 ("dp83640: Delay scheduled work.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20mlxsw: spectrum: Add FID miss trapJiri Pirko
When there is no FID set for a specific packet, the HW will drop it. However, by default these packets are useful to be delivered to CPU as it can inspect them and program HW accordingly. So add this trap. This would only ever happen when port is enslaved to an OVS master. Otherwise, packets would be dropped during VLAN / STP filtering, before FID classification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20mlxsw: spectrum: Allow ports to work under OVS masterJiri Pirko
>From now on, a port can become a slave of OVS master. All vlans are enabled, STP state is set to "forwarding". It is up to the OVS userspace daemon to setup the flows either in kernel or in HW using TC flower offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20mlxsw: spectrum: Teach mlxsw_sp_port_vlan_set to accept any vlan rangeJiri Pirko
So far, mlxsw_sp_port_vlan_set range is limited by MLXSW_REG_SPVM_REC_MAX_COUNT. In spectrum_switchdev code this is wrapped up by a helper function which actually does multiple calls to FW for bigger ranges. Move the code into mlxsw_sp_port_vlan_set and use it always. That allows caller not to care about the range. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20mlxsw: spectrum_flower: Set dummy FID before forward actionJiri Pirko
HW requires the FID to be valid in order for the forward action to work. So regardless of the current FID validity, just set the dummy FID which would do the trick. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20mlxsw: spectrum: Add dummy FID initializationJiri Pirko
For forwarding using ACL action, HW needs a valid FID to be setup. It does not actually use it, so it can be any valid FID. So create a dummy FID only for this purpose. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20mlxsw: spectrum: Implement action to set FIDJiri Pirko
Implement part of multipurpose Virtual Router and Forwarding Domain Action that takes care of setting up FID. We need to use it to be able to forward packets using ACL action when no FID is associated on RX. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20mlxsw: spectrum: Fix indent in mlxsw_sp_netdevice_port_upper_eventJiri Pirko
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20Merge tag 'mac80211-next-for-davem-2017-04-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== My last pull request has been a while, we now have: * connection quality monitoring with multiple thresholds * support for FILS shared key authentication offload * pre-CAC regulatory compliance - only ETSI allows this * sanity check for some rate confusion that hit ChromeOS (but nobody else uses it, evidently) * some documentation updates * lots of cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net: dsa: LAN9303: add MDIO managed mode supportJuergen Beisert
When the LAN9303 device is in MDIO manged mode, all register accesses must be done via MDIO. Please note: this code is compile time tested only due to the absence of such configured hardware. It is based on a patch from Stefan Roese from 2014. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> CC: devicetree@vger.kernel.org CC: robh+dt@kernel.org CC: mark.rutland@arm.com CC: sr@denx.de Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net: dsa: LAN9303: add I2C managed mode supportJuergen Beisert
In this mode the switch device and the internal phys will be managed via I2C interface. The MDIO interface is still supported, but for the (emulated) CPU port only. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> CC: devicetree@vger.kernel.org CC: robh+dt@kernel.org CC: mark.rutland@arm.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net: dsa: add new DSA switch driver for the SMSC-LAN9303Juergen Beisert
The SMSC/Microchip LAN9303 is an ethernet switch device with one CPU port and two external ethernet ports with built-in phys. This driver uses the DSA framework, but is currently only capable of separating the two external ports. There is no offload support yet. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net/mlx4: suppress 'may be used uninitialized' warningGreg Thelen
gcc 4.8.4 complains that mlx4_SW2HW_MPT_wrapper() uses an uninitialized 'mpt' variable: drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_SW2HW_MPT_wrapper': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:2802:12: warning: 'mpt' may be used uninitialized in this function [-Wmaybe-uninitialized] mpt->mtt = mtt; I think this warning is a false complaint. mpt is only used when mr_res_start_move_to() return zero, and in all such cases it initializes mpt. But apparently gcc cannot see that. Initialize mpt to avoid the warning. Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
A function in kernel/bpf/syscall.c which got a bug fix in 'net' was moved to kernel/bpf/verifier.c in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20rt2800: fix mt7620 E2 channel registersTomislav Požega
update RF register 47 and 54 values according to vendor driver Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rt2800: fix mt7620 vco calibration registersTomislav Požega
Use register values from init LNA function instead of the ones from restore LNA function. Apply register values based on rx path configuration. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rt2800: do VCO calibration after programming ALCDaniel Golle
Somehow AP doesn't come up and the first scan fails if we don't do VCO calibration every time. The vendor driver duplicates the VCO calibration function into the channel switching logic, we can do the same with less duplication. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rt2800: fix LNA gain assignment for MT7620Daniel Golle
The base value used for MT7620 differs from Rt5392 which resulted in quite bad RX signal quality. Fix this by using the correct base value as well as the LNA calibration values for HT20. Reported-by: Tom Psyborg <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.12. Major changes: ath9k * add support for Dell Wireless 1601 PCI device * add debugfs file to manually override noise floor ath10k * bump up FW API to 6 for a new QCA6174 firmware branch wil6210 * support 8 kB RX buffers
2017-04-20Merge tag 'iwlwifi-next-for-kalle-2017-04-19-2' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Another series of patches intended for v4.12. These are the changes: * Heavy work for the A000 device series; * Some cleanup patches; * A few fixes; * Dynamic SAR support; * Geographical SAR support; * Support a few new PCI device IDs;
2017-04-20rtlwifi: btcoex: 21a 2ant: wifi is linking actionYan-Hsuan Chuang
When wifi is under scanning/linking/roaming, do not run the reset of the coex mechanism because these activities are important for wifi, just run the linking process and return. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: just return when wifi is under ipsYan-Hsuan Chuang
If wifi is in power saving mode, do nothing. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> --- drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c | 6 ++++++ 1 file changed, 6 insertions(+) Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: do not limit rx agg sizeYan-Hsuan Chuang
For bt profiling, we do not need to limit the rx agg size. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: macro for bt rssi thresholdYan-Hsuan Chuang
Using macro to control the bt threshold. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: dec bt power according to bt rssi and set tdmaYan-Hsuan Chuang
Check the bt rssi first and decrease it if the bt rssi is too high. Then set the tdma and coex table. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: notify fw the number of APsYan-Hsuan Chuang
Use h2c to tell the firmware if the number of AP is more than 10 or not. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: monitor extra wifi rssi to examine network statusYan-Hsuan Chuang
Here we monitor one more wifi rssi to check the status of the network and set the coex table instead of the legacy way. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: add multiport action for p2p/miracastYan-Hsuan Chuang
For p2p/miracast, the wifi may have multiple ports for different roles. Under this, we need extra settings for turning off the tdma and proper coex table parameters. We monnitor the number of links on a port to determine if it is for p2p/miracast or not. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: set tdma based on rssi state amd limit rx agg sizeYan-Hsuan Chuang
Monitor the rssi state to set the tdma and limit rx aggregation size to fit the bt profiling. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: fix some coding style issuesYan-Hsuan Chuang
Fix some ident and naming for linux coding style. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: more combinations of wifi/bt rssi stateYan-Hsuan Chuang
For bt a2dp, we need to check more rssi state combinations to have better voice quality. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-12 02:40:58 +0000