summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-09-21nfp: bpf: add support for legacy redirect actionJakub Kicinski
Data path has redirect support so expressing redirect to the port frame came from is a trivial matter of setting the right result code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21nfp: bpf: add packet marking supportJakub Kicinski
Add missing ABI defines and eBPF instructions to allow mark to be passed on and extend prepend parsing on the RX path to pick it up from packet metadata. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21nfp: bpf: allow offloaded filters to update statsJakub Kicinski
Periodically poll stats and call into offloaded actions to update them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21nfp: bpf: add hardware bpf offloadJakub Kicinski
Add hardware bpf offload on our smart NICs. Detect if capable firmware is loaded and use it to load the code JITed with just added translator onto programmable engines. This commit only supports offloading cls_bpf in legacy mode (non-direct action). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21nfp: add BPF to NFP code translatorJakub Kicinski
Add translator for JITing eBPF to operations which can be executed on NFP's programmable engines. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21net: can: ifi: Configure transmitter delayMarek Vasut
Configure the transmitter delay register at +0x1c to correctly handle the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample point) to a proper offset, so that the TDC mechanism works and won't generate error frames on the CAN link. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-09-21mlxsw: spectrum: Implement max rif resourceNogah Frankel
Replace max rif const with using the result from resource query. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21mlxsw: pci: Add max router interface resourceNogah Frankel
Add the max number of rif (router interfaces) to resource query. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21mlxsw: pci: Add some miscellaneous resourcesNogah Frankel
Add max system ports, max regions and max vlan groups to resource query. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21mlxsw: spectrum: Implement max virtual routers resourceNogah Frankel
Replace max virtual routers const with the result from the resource query. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21mlxsw: pci: Add max virtual routers resourceNogah Frankel
Add the max number of virtual routers to resource query. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21mlxsw: profile: Add KVD resources to profile configNogah Frankel
Use resources from resource query to determine values for the profile configuration. Add KVD determined section sizes to the resources struct. Change the profile struct and value to match this changes. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21mlxsw: pci: Add KVD size relate resourcesNogah Frankel
Add KVD size, and minimum sizes for the single and double sections resources to resources query. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21mlxsw: spectrum: lag resources- use resources data instead of constsNogah Frankel
Use max lag and max ports in lag resources as the result of resource query instead of using const to save them. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21mlxsw: pci: Add lag related resources to resources queryNogah Frankel
Add max lag and max ports in lag resources to resources query. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: disable ALDPS and EEE before setting PHYhayeswang
Disable ALDPS and EEE to avoid the possible failure when setting the PHY. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: remove r8153_enable_eeehayeswang
Remove r8153_enable_eee(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: move PHY settings to hw_phy_cfghayeswang
Move the PHY relative settings together to hw_phy_cfg(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: move enabling PHYhayeswang
Move enabling PHY to init(), otherwise some other settings may fail. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: move some functionshayeswang
Move the following functions forward. r8152_mmd_indirect() r8152_mmd_read() r8152_mmd_write() r8152_eee_en() r8152b_enable_eee() r8153_eee_en() r8153_enable_eee() r8152b_enable_fc() r8153_aldps_en() Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapterHariprasad Shenai
We were missing check for 25G and 100G while checking port speed, which lead to less number of queues getting allocated for 25G & 100G adapters and leading to low throughput. Adding the missing check for both NIC and vNIC driver. Also fixes port advertisement for 25G and 100G in ethtool output. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21mlxsw: spectrum: Make offloads stats functions staticOr Gerlitz
The offloads stats functions are local to this file, make them static. Fixes: fc1bbb0f1831 ('mlxsw: spectrum: Implement offload stats ndo [..]') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21net: ethernet: mediatek: enhance with avoiding superfluous assignment inside ↵Sean Wang
mtk_get_ethtool_stats data_src is unchanged inside the loop, so this patch moves the assignment to outside the loop to avoid unnecessarily assignment Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21net: dsa: mv88e6xxx: handle multiple ports in ATUVivien Didelot
An address can be loaded in the ATU with multiple ports, for instance when adding multiple ports to a Multicast group with "bridge mdb". The current code doesn't allow that. Add an helper to get a single entry from the ATU, then set or clear the requested port, before loading the entry back in the ATU. Note that the required _mv88e6xxx_atu_getnext function is defined below mv88e6xxx_port_db_load_purge, so forward-declare it for the moment. The ATU code will be isolated in future patches. Fixes: 83dabd1fa84c ("net: dsa: mv88e6xxx: make switchdev DB ops generic") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20ipvlan: Fix dependency issueMahesh Bandewar
kbuild-build-bot reported that if NETFILTER is not selected, the build fails pointing to netfilter symbols. Fixes: 4fbae7d83c98 ("ipvlan: Introduce l3s mode") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-09-19 Here's the main bluetooth-next pull request for the 4.9 kernel. - Added new messages for monitor sockets for better mgmt tracing - Added local name and appearance support in scan response - Added new Qualcomm WCNSS SMD based HCI driver - Minor fixes & cleanup to 802.15.4 code - New USB ID to btusb driver - Added Marvell support to HCI UART driver - Add combined LED trigger for controller power - Other minor fixes here and there Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-206pack: fix buffer length mishandlingAlan Cox
Dmitry Vyukov wrote: > different runs). Looking at code, the following looks suspicious -- we > limit copy by 512 bytes, but use the original count which can be > larger than 512: > > static void sixpack_receive_buf(struct tty_struct *tty, > const unsigned char *cp, char *fp, int count) > { > unsigned char buf[512]; > .... > memcpy(buf, cp, count < sizeof(buf) ? count : sizeof(buf)); > .... > sixpack_decode(sp, buf, count1); With the sane tty locking we now have I believe the following is safe as we consume the bytes and move them into the decoded buffer before returning. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20Merge tag 'linux-can-fixes-for-4.8-20160919' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-09-19 this is a pull request of one patch for the upcoming linux-4.8 release. The patch by Fabio Estevam fixes the pm handling in the flexcan driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20mlx4: add missed recycle opportunity for XDP_TX on TX failureJesper Dangaard Brouer
Correct drop handling for XDP_TX on TX failure, were recently added in commit 95357907ae73 ("mlx4: fix XDP_TX is acting like XDP_PASS on TX ring full"). The change missed an opportunity for recycling the RX page, instead of going through the page allocator, like the regular XDP_DROP action does. This patch cease the opportunity, by going through the XDP_DROP case. Fixes: 95357907ae73 ("mlx4: fix XDP_TX is acting like XDP_PASS on TX ring full") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20qed: Fix stack corruption on probeYuval Mintz
Commit fe56b9e6a8d95 ("qed: Add module with basic common support") has introduced a stack corruption during probe, where filling a local struct with data to be sent to management firmware is incorrectly filled; The data is written outside of the struct and corrupts the stack. Changes from v1: ---------------- - Correct the value written [Caught by David Laight] Fixes: fe56b9e6a8d95 ("qed: Add module with basic common support") Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20net-next: dsa: qca8k: remove empty set_addr() stubJohn Crispin
The set_addr() callback is now optional. Remove the empty stub that qca8k has. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20net-next: dsa: b53: remove empty set_addr() stubJohn Crispin
The set_addr() callback is now optional. Remove the empty stub that b53 has. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20xen-netfront: avoid packet loss when ethernet header crosses page boundaryVitaly Kuznetsov
Small packet loss is reported on complex multi host network configurations including tunnels, NAT, ... My investigation led me to the following check in netback which drops packets: if (unlikely(txreq.size < ETH_HLEN)) { netdev_err(queue->vif->dev, "Bad packet size: %d\n", txreq.size); xenvif_tx_err(queue, &txreq, extra_count, idx); break; } But this check itself is legitimate. SKBs consist of a linear part (which has to have the ethernet header) and (optionally) a number of frags. Netfront transmits the head of the linear part up to the page boundary as the first request and all the rest becomes frags so when we're reconstructing the SKB in netback we can't distinguish between original frags and the 'tail' of the linear part. The first SKB needs to be at least ETH_HLEN size. So in case we have an SKB with its linear part starting too close to the page boundary the packet is lost. I see two ways to fix the issue: - Change the 'wire' protocol between netfront and netback to start keeping the original SKB structure. We'll have to add a flag indicating the fact that the particular request is a part of the original linear part and not a frag. We'll need to know the length of the linear part to pre-allocate memory. - Avoid transmitting SKBs with linear parts starting too close to the page boundary. That seems preferable short-term and shouldn't bring significant performance degradation as such packets are rare. That's what this patch is trying to achieve with skb_copy(). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20net: phy: Add MAC-IF driver for Microsemi PHYs.Raju Lakkaraju
All the review comments updated and resending for review. This is MAC interface feature. Microsemi PHY can support RGMII, RMII or GMII/MII interface between MAC and PHY. MAC-IF function program the right value based on Device tree configuration. Tested on Beaglebone Black with VSC 8531 PHY. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20mlxsw: spectrum: Fix sparse warningsIdo Schimmel
drivers/net/ethernet/mellanox/mlxsw//spectrum.c:251:28: warning: symbol 'mlxsw_sp_span_entry_find' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:265:28: warning: symbol 'mlxsw_sp_span_entry_get' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_sp_span_type versus drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_reg_mpar_i_e ... drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum mlxsw_reg_sbxx_dir versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum devlink_sb_pool_type drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum mlxsw_reg_sbpr_mode versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum devlink_sb_threshold_type ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_sp_l3proto versus drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_reg_ralxx_protocol ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1749:6: warning: symbol 'mlxsw_sp_fib_entry_put' was not declared. Should it be static? Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20mlxsw: Change the RX LAG hash function from XOR to CRCElad Raz
Change the RX hash function from XOR to CRC in order to have better distribution of the traffic. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20bnxt_en: Fix build error for kernesl without RTC-LIBRob Swindell
bnxt_hwrm_fw_set_time() now returns -EOPNOTSUPP when built for kernel without RTC_LIB. Setting the firmware time is not critical to the successful completion of the firmware update process. Signed-off-by: Rob Swindell <Rob.Swindell@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net/mlx5: E-Switch, Handle mode change failuresOr Gerlitz
E-switch mode changes involve creating HW tables, potentially allocating netdevices, etc, and things can fail. Add an attempt to rollback to the existing mode when changing to the new mode fails. Only if rollback fails, getting proper SRIOV functionality requires module unload or sriov disablement/enablement. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init codeOr Gerlitz
When enablement of the SRIOV e-switch in certain mode (switchdev or legacy) fails, we must set the mode to none. Otherwise, we'll run into double free based crashes when further attempting to deal with the e-switch (such as when disabling sriov or unloading the driver). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net/mlx5: Fix flow counter bulk command out mailbox allocationRoi Dayan
The FW command output length should be only the length of struct mlx5_cmd_fc_bulk out field. Failing to do so will cause the memcpy call which is invoked later in the driver to write over wrong memory address and corrupt kernel memory which results in random crashes. This bug was found using the kernel address sanitizer (kasan). Fixes: a351a1b03bf1 ('net/mlx5: Introduce bulk reading of flow counters') Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net/mlx5: clean function declarations in eswitch.c upBaoyou Xie
We get 2 warnings when building kernel with W=1: drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c:463:5: warning: no previous prototype for 'esw_offloads_init' [-Wmissing-prototypes] drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c:521:6: warning: no previous prototype for 'esw_offloads_cleanup' [-Wmissing-prototypes] In fact, both functions are declared in drivers/net/ethernet/mellanox/mlx5/core/eswitch.c,but should be declared in a header file, thus can be recognized in other file. So this patch moves the declarations into drivers/net/ethernet/mellanox/mlx5/core/eswitch.h Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19be2net: mark symbols static where possibleBaoyou Xie
We get 4 warnings when building kernel with W=1: drivers/net/ethernet/emulex/benet/be_main.c:4368:6: warning: no previous prototype for 'be_calculate_pf_pool_rss_tables' [-Wmissing-prototypes] drivers/net/ethernet/emulex/benet/be_cmds.c:4385:5: warning: no previous prototype for 'be_get_nic_pf_num_list' [-Wmissing-prototypes] drivers/net/ethernet/emulex/benet/be_cmds.c:4537:6: warning: no previous prototype for 'be_reset_nic_desc' [-Wmissing-prototypes] drivers/net/ethernet/emulex/benet/be_cmds.c:4910:5: warning: no previous prototype for '__be_cmd_set_logical_link_config' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19phy: mark lan88xx_suspend() staticBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/net/phy/microchip.c:58:5: warning: no previous prototype for 'lan88xx_suspend' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net: ethernet: broadcom: bcm63xx: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net: ethernet: broadcom: bcm63xx: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net: ethernet: broadcom: b44: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net: ethernet: broadcom: b44: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19bnxt_en: Fixed the VF link status after a link state changeEddie Wai
The VF link state can be changed via the 'ip link set' cmd. Currently, the new link state does not take effect immediately. The fix is for the PF to send a link change async event to the designated VF after a VF link state change. This async event will trigger the VF to update the link status. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19bnxt_en: Support for "ethtool -r" commandDeepak Khungar
Restart autoneg if autoneg is enabled. Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-16 16:40:41 +0000