summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-03-29Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.17. Major changes: ath10k * enable chip temperature measurement for QCA6174/QCA9377 * add firmware memory dump for QCA9984 * enable buffer STA on TDLS link for QCA6174 * support different beacon internals in multiple interface scenario for QCA988X/QCA99X0/QCA9984/QCA4019
2018-03-29ath: Remove unnecessary ath_bcast_mac and use eth_broadcast_addrJoe Perches
Remove the static array and use the generic routine to set the Ethernet broadcast address. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: fix vdev stats for 10.4 firmwareRajkumar Manoharan
Currently vdev stats displayed in fw_stats are applicable only for TLV based firmware and fix it for 10.4 firmware as of now. The vdev stats in 10.4 firmware is split into two parts (vdev_stats, vdev_stats_extended). The actual stats are captured only in extended vdev stats. In order to enable vdev stats, appropriate feature bit will be set on extended resource config. As FTM related counters are available only on newer 10.4 based firmware, these counters will be displayed only on valid data. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: fix recent bandwidth conversion bugChristian Lamparter
The commit "cfg80211: make RATE_INFO_BW_20 the default" changed the index of RATE_INFO_BW_20, but the updates to ath10k missed the special bandwidth calculation case in ath10k_update_per_peer_tx_stats(). This will fix below warning, WARNING: CPU: 0 PID: 609 at net/wireless/util.c:1254 cfg80211_calculate_bitrate+0x174/0x220 invalid rate bw=1, mcs=9, nss=2 (unwind_backtrace) from (cfg80211_calculate_bitrate+0x174/0x220) (cfg80211_calculate_bitrate) from (nl80211_put_sta_rate+0x44/0x1dc)from (nl80211_put_sta_rate) from (nl80211_send_station+0x388/0xaf0) (nl80211_get_station+0xa8/0xec) [ end trace da8257d6a850e91a ] Fixes: 842be75c77cb ("cfg80211: make RATE_INFO_BW_20 the default") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: advertize beacon_int_min_gcdAnilkumar Kolli
This patch fixes regression caused by 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals"), with this change cfg80211 expects the driver to advertize 'beacon_int_min_gcd' to support different beacon intervals in multivap scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019. Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and 1000msec respectively. Frimware: firmware-5.bin_10.4-3.5.3-00053 Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals") Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: fix TDLS peer TX data failure issue on encryped APYingying Tang
For WPA encryption, QCA6174 firmware(version: WLAN.RM.4.4) will unblock data when M4 was sent successfully. For other encryption which didn't need 4-way handshake firmware will unblock the data when peer authorized. Since TDLS is 3-way handshake host need send authorize cmd to firmware to unblock data. Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: avoid to set WEP key for TDLS peerYingying Tang
TDLS peer do not need WEP key. Setting WEP key will lead to TDLS setup failure. Add fix to avoid setting WEP key for TDLS peer. Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: enable TDLS peer inactivity detectionYingying Tang
Enable TDLS peer inactivity detetion feature. QCA6174 firmware(version: WLAN.RM.4.4) support TDLS link inactivity detecting. Set related parameters in TDLS WMI command to enable this feature. Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: enable TDLS peer buffer STA featureYingying Tang
Enable TDLS peer buffer STA feature. QCA6174 firmware(version: WLAN.RM.4.4) support TDLS peer buffer STA, it reports this capability through wmi service map in wmi service ready event. Set related parameter in TDLS WMI command to enable this feature. Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29wcn36xx: dequeue all pending indicator messagesDaniel Mack
In case wcn36xx_smd_rsp_process() is called more than once before hal_ind_work was dispatched, the messages will end up in hal_ind_queue, but wcn36xx_ind_smd_work() will only look at the first message in that list. Fix this by dequeing the messages from the list in a loop, and only stop when it's empty. This issue was found during a review of the driver. In my tests, that race never actually occured. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29wcn36xx: Fix firmware crash due to corrupted buffer addressLoic Poulain
wcn36xx_start_tx function retrieves the buffer descriptor from the channel control queue to start filling tx buffer information. However, nothing prevents this same buffer to be concurrently accessed in a concurent tx call, leading to potential buffer coruption and firmware crash (observed during iperf test). The channel control queue should only be accessed and updated with the channel lock. Fix this issue by using a local buffer descriptor which will be copied in the thread-safe wcn36xx_dxe_tx_frame. Note that buffer descriptor size is few bytes so the introduced copy overhead is insignificant. Moreover, this allows to keep the locked section minimal. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29wcn36xx: turn off probe response offloadingRamon Fried
It appears that the WCN36xx firmware doesn't actually respond to probe requests. Until it's resolved, switch the probe response responsibility to the 802.11 layer to allow creation of hidden SSID AP's. Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: add memory dump support QCA9984Anilkumar Kolli
QCA9984/QCA99X0/QCA4019 chipsets have 8 memory regions, dump all of them to the firmware coredump file. Some of the regions need to be read using ioread() so add new region types for them. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> [kvalo: refactoring etc] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: refactor ath10k_pci_dump_memory() in preparation for QCA9984 supportKalle Valo
As QCA9984 needs two region types refactor the code to make it easier add the new types. No functional changes. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: suppress "Unknown eventid: 36925" warningsSathishkumar Muruganandam
FW has Smart Logging feature enabled by default for detecting failures and processing FATAL_CONDITION_EVENTID (36925 - 0x903D) back to host. Since ath10k doesn't implement the Smart Logging and FATAL CONDITION EVENT processing yet, suppressing the unknown event ID warning by moving this under ATH10K_DBG_WMI. Simulated the same issue by having associated STA powered off when ping flood was running from AP backbone. This triggerd STA KICKOUT in AP followed by FATAL CONDITION event 36925. Issue was reproduced and verified in below DUT ------------------------------------------------ AP mode of OpenWRT QCA9984 running 6.0.8 with FW ver 10.4-3.5.3-00053 Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: add FW API 6 firmware image for QCA9377Ryan Hsu
Firmware WLAN.TF.2.1-00014-QCARMSWP-1 now supports reading the board ID information and also required 9 IRAM bank, which older ath10k version don't have the support will fail to be enabled, so in order to maintain the backward compatibility, we need to update the FW API to 6. Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: enable QCA6174/QCA9377 to read the chip temperatureRyan Hsu
The firmware of QCA6174/QCA9377 already support the feature, just enable it to be able to handle the get_temperature command and process the event. You can read the temperature by using the hwmon interface, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Verified with the following hardware and software combination, QCA6174, only firmware-4.bin doesn't support this, otherwise all support. QCA9377, all the firmwares upstreamed support this command Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29Revert "ath10k: send (re)assoc peer command when NSS changed"Karthikeyan Periyasamy
This reverts commit 55884c045d31a29cf69db8332d1064a1b61dd159. When Ath10k is in AP mode and an unassociated STA sends a VHT action frame (Operating Mode Notification for the NSS change) periodically to AP this causes ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during NSS update. Over the time (with a certain client it can happen within 15 mins when there are over 500 of these VHT action frames) continuous calls of WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust. To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS updates and no need to call ath10k_station_assoc(). So revert the original commit from 2014 as it's unclear why the change was really needed. Now the firmware assert doesn't happen anymore. Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053. This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and QCA988x platform with firmware version: 10.2.4-1.0-00036. Firmware Assert log: ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c) ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1 ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386 ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344 ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0002:01:00.0: firmware register dump: ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31 ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60 ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000 ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2 ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000 ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34 ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4 ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4 ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00 ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000 ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000 ath10k_pci 0002:01:00.0: Copy Engine register dump: ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx: ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3 ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213 ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21 ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25 ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104 ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156 ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12 ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1 ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0 ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1 ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0 ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather: ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0 ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0 ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0 ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0 ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0 ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0 ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0 ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0 ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0 ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0 ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0 ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0 ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0 ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath9k: fix DFS detector synchronizationTimothy Redaelli
some userspace programs (e.g. hostapd) need to set the regulatory domain before selecting the operating channel. Synchronize DFS detector regardless of the value of ah->curchan, to avoid situations where wireless scan can't be done on some 5GHz sub-bands, because dfs_region is constantly UNSET. Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Timothy Redaelli <tredaelli@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-28nfp: bpf: improve wrong FW response warningsJakub Kicinski
When FW responds with a message of wrong size or type make sure the type is checked first and included in the wrong size message. This makes it easier to figure out which FW command failed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add support for bpf_get_prandom_u32()Jakub Kicinski
NFP has a prng register, which we can read to obtain a u32 worth of pseudo random data. Generate code for it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add support for atomic add of unknown valuesJakub Kicinski
Allow atomic add to be used even when the value is not guaranteed to fit into a 16 bit immediate. This requires the value to be pulled as data, and therefore use of a transfer register and a context swap. Track the information about possible lengths of the value, if it's guaranteed to be larger than 16bits don't generate the code for the optimized case at all. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: expose command delay slotsJakub Kicinski
Allow callers to control the delay slots of commands, instead of giving them just a wait/nowait choice. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add basic support for atomic addsJakub Kicinski
Implement atomic add operation for 32 and 64 bit values. Depend on the verifier to ensure alignment. Values have to be kept in big endian and swapped upon read/write. For now only support atomic add of a constant. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add map deletes from the datapathJakub Kicinski
Support calling map_delete_elem() FW helper from the datapath programs. For JIT checks and code are basically equivalent to map lookups. Similarly to other map helper key must be on the stack. Different pointer types are left for future extension. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add map updates from the datapathJakub Kicinski
Support calling map_update_elem() from the datapath programs by calling into FW-provided helper. Value pointer is passed in LM pointer #2. Keeping track of old state for arg3 is not necessary, since LM pointer #2 will be always loaded in this case, the trivial optimization for value at the bottom of the stack can't be done here. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add helper for basic map call checksJakub Kicinski
Add a verifier helper for performing the basic state checks before a call to a map helper. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add helper for validating stack pointersJakub Kicinski
Our implementation has restriction on stack pointers for function calls. Move the common checks into a helper for reuse. The state has to be encapsulated into a structure to support parameters other than BPF_REG_2. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: rename map_lookup_stack() to map_call_stack_common()Jakub Kicinski
We will reuse most of map call code gen for other map calls. Rename the lookup gen function and use meta->func_id instead of hard-coding lookup. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: detect packet reads could be cached, enable the optimisationJiong Wang
This patch is the front end of this optimisation, it detects and marks those packet reads that could be cached. Then the optimisation "backend" will be activated automatically. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: support unaligned read offsetJiong Wang
This patch add the support for unaligned read offset, i.e. the read offset to the start of packet cache area is not aligned to REG_WIDTH. In this case, the read area might across maximum three transfer-in registers. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: read from packet data cache for PTR_TO_PACKETJiong Wang
This patch assumes there is a packet data cache, and would try to read packet data from the cache instead of from memory. This patch only implements the optimisation "backend", it doesn't build the packet data cache, so this optimisation is not enabled. This patch has only enabled aligned packet data read, i.e. when the read offset to the start of cache is REG_WIDTH aligned. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28net/wireless/iwlwifi: fix iwlwifi_dev_ucode_error tracepointAlexei Starovoitov
fix iwlwifi_dev_ucode_error tracepoint to pass pointer to a table instead of all 17 arguments by value. dvm/main.c and mvm/utils.c have 'struct iwl_error_event_table' defined with very similar yet subtly different fields and offsets. tracepoint is still common and using definition of 'struct iwl_error_event_table' from dvm/commands.h while copying fields. Long term this tracepoint probably should be split into two. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-28net/mediatek: disambiguate mt76 vs mt7601u trace eventsAlexei Starovoitov
two trace events defined with the same name and both unused. They conflict in allyesconfig build. Rename one of them. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-28iwlwifi: wrt: add fw force restart via triggersShahar S Matityahu
We can set triggers that cause a debug data collection when something of interest happens (e.g. when too many probes are lost conscutively). Normally, this triggers don't cause the FW to be restarted, but in some cases that may be desired, so we recover from the problem. To support this, add a flag that indicates that the FW should be restarted when the trigger fires. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: save low latency causes in an enumSara Sharon
Currently we have a boolean variable for each cause. This costs space, and requires to check each separately when determining low latency. Since we have another cause incoming, convert it to an enum. While at it, move the retrieval of the prev value and the assignment of the new value to be inside iwl_mvm_update_low_latency and save the need for each caller to do it separately. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: bump the max API version for 9000 and 22000 devicesEmmanuel Grumbach
We are now ready to load 38.ucode Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: api: Add geographic profile information to MCC_UPDATE_CMDHaim Dreyfuss
Some geographic profiles require specific handling. For example ETSI profile requires special channel access handling. Add geographic profile information to MCC_UPDATE response to allow it. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: add a bunch of new 9000 PCI IDsLuca Coelho
A lot of new PCI IDs were added for the 9000 series. Add them to the list of supported PCI IDs. Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: fw api: support the new scan request FW API versionAyala Beker
Remove fragmented_dwell_time and add num_of_fragments to support the new API version. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: Allow iwl_mvm_mac_mgd_prepare_tx() when associatedIlan Peer
The FW does not allocate quota air time for the binding of a station MAC before iwlmvm indicates that it is associated. Currently iwlmvm indicates that the MAC is associated only after hearing a beacon from the AP. In case a deauthentication frame is sent before the MAC is associated, the frame might not be sent as the corresponding binding is not scheduled. To handle such cases, set IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP in the HW flags, requesting mac80211 to call the mgd_prepare_tx() callback before transmitting a deauthentication frame if associated but no beacon was heard from the AP. In addition, do not warn in iwl_mvm_mac_mgd_prepare_tx() when already associated as now the callback can be called also when associated. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: add support for oceZamir, Roee
Add support for Optimized Connectivity Experience (OCE). Get capabilities from the fw, expose them with nl80211, and enable them in UMAC scan if the relevant nl80211 flags are set by the userspace. Signed-off-by: Roee Zamir <roee.zamir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: add adaptive dwell supportZamir, Roee
Update the scan command API with support for adaptive dwell. Adaptive dwell is a type of scan that dynamically changes the time it remains on each channel listening for beacons or probe responses. Signed-off-by: Roee Zamir <roee.zamir@intel.com> Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: check if mac80211_queue is valid in iwl_mvm_disable_txqLuca Coelho
Sometimes iwl_mvm_disable_txq() may be called with mac80211_queue == IEEE80211_INVAL_HW_QUEUE, and this would cause us to use BIT(0xFF) which is way too large for the u16 we used to store it in hw_queue_to_mac820211. If this happens the following UBSAN warning will be generated: [ 167.185167] UBSAN: Undefined behaviour in drivers/net/wireless/intel/iwlwifi/mvm/utils.c:838:5 [ 167.185171] shift exponent 255 is too large for 64-bit type 'long unsigned int' Fix that by checking that it is not IEEE80211_INVAL_HW_QUEUE and, while at it, add a warning if the queue number is larger than IEEE80211_MAX_QUEUES. Fixes: 34e10860ae8d ("iwlwifi: mvm: remove references to queue_info in new TX path") Reported-by: Paul Menzel <pmenzel+linux-wireless@molgen.mpg.de> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: set default timstamp marker cmdMordechay Goodstein
In case debug configuration is started with LDBG cmd also start timestamp marker for syncing logs witn the FW. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: move TSO segment to a separate functionSara Sharon
This makes future bail-outs from transmitting an AMSDU more readable. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: take RCU lock before dereferencingSara Sharon
RCU isn't properly locked. Fixes: 46d372af9935 ("iwlwifi: mvm: rs: new rate scale API - add FW notifications") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: flip AMSDU addresses only for 9000 familySara Sharon
Hardware bug was fixed in later generation. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo
Requested by Luca, needed for upcoming patch "iwlwifi: add a bunch of new 9000 PCI IDs".
2018-03-27net/mlx5e: Recover Send Queue (SQ) from error stateEran Ben Elisha
An error TX completion (CQE) which arrived on a specific SQ indicates that this SQ got moved by the hardware to error state, which means all pending and incoming TX requests are dropped or will be dropped and no further "Good" CQEs will be generated for that SQ. Before this patch TX completions (CQEs) were not monitored and were handled as a regular CQE. This caused the SQ to stay in an error state, making it useless for xmiting new packets. Mitigation plan: In case of an error completion, schedule a recovery work which would do the following: - Mark the TXQ as DRV_XOFF to disable new packets to arrive from the stack - NAPI to flush all pending SQ WQEs (via flush_in_error_en bit) to release SW and HW resources(SKB, DMA, etc) and have the SQ and CQ consumer/producer indices synced. - Modify the SQ state ERR -> RST -> RDY (restart the SQ). - Reactivate the SQ and reset SQ cc and pc If we identify two consecutive requests for SQ recover in less than 500 msecs, drop the recover request to avoid CPU overload, as this scenario most likely happened due to a severe repeated bug. In addition, add SQ recover SW counter to monitor successful recoveries. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-13 02:26:36 +0000