summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-03-27rtlwifi: correct commentKevin Lo
Correct comment. Set bit 3 and bit 4 of 0x0005 register (REG_APS_FSMCO + 1) to 0 which means disable WL suspend, not enable WL suspend. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add new but dummy definitions introduced by 8822bPing-Ke Shih
btcoex support multiple platforms, but this drivers doesn't support full functions yet, so this commit adds dummy definitions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: new definitions introduced by 8822bePing-Ke Shih
New constant and variables definitions are used by btcoex of 8822b, so this commit add them. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: add assoc type v2 to connection notifyPing-Ke Shih
In connection notify v1, btcoex only need to know start/end association, and it will discriminate 2G and 5G band in v2. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add pre- and post- normal LPS functionPing-Ke Shih
Normal LPS is decomposed into pre- and post- parts, so we can issue H2C with TDMA parameters in the "critical section" that dirver can't change LPS state at the moment. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add interaction with phydmPing-Ke Shih
Get phydm's counter and version from the module phydm that is not submitted so we implement dummy functions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add rate table for the use of btcoexPing-Ke Shih
The btcoex use the rate to rsolve IOT issue that some APs reduce TX rate quickly, so it uses the RX rate as a clue to decide TDMA. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger#lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Get status of multichannel concurrencePing-Ke Shih
btcoex does different decision according to MCC or SCC status, but driver is still SCC currently. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add customer_id to do special deal to oem vendorPing-Ke Shih
Add customer_id field in structure, and then this is a clue to implement the behavior defined by vendor LENOVO_CHINA. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add enum DM_INFO for btcoex to query dm's countersPing-Ke Shih
btcoex uses dm's counters to check the environment is noisy or not. If it is clean, btcoex set more time slots to WiFi so that it can transmit as soon as possible. That will save time, and BT will have more time slots after WiFi traffic is complete. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: remove redundant statement found by static checkerPing-Ke Shih
smatch reports "rtl_is_special_data() warn: inconsistent indenting", but it is an obvious redundant statement so remove it. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: Add modifier static to functions reported by sparsePing-Ke Shih
sparse reports some functions were not declared, so add 'static' as modifier. Remove an unused function btc8821a1ant_is_wifi_status_changed() exposed due to 'static'. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rsi: fix kernel panic observed on 64bit machineAmitkumar Karwar
Following kernel panic is observed on 64bit machine while loading the driver. It is fixed if we pass dynamically allocated memory to SDIO for DMA. BUG: unable to handle kernel paging request at ffffeb04000172e0 IP: sg_miter_stop+0x56/0x70 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: rsi_sdio(OE+) rsi_91x(OE) btrsi(OE) rfcomm bluetooth ecdh_generic mac80211 mmc_block fuse xt_CHECKSUM iptable_mangle drm_kms_helper mmc_core serio_raw drm firewire_ohci tg3 CPU: 0 PID: 4003 Comm: insmod Tainted: G OE 4.16.0-rc1+ #27 Hardware name: Dell Inc. Latitude E5500 /0DW634, BIOS A19 06/13/2013 RIP: 0010:sg_miter_stop+0x56/0x70 RSP: 0018:ffff88007d003e78 EFLAGS: 00010002 RAX: 0000000000000003 RBX: 0000000000000004 RCX: 0000000000000000 RDX: ffffeb04000172c0 RSI: ffff88002f58002c RDI: ffff88007d003e80 RBP: 0000000000000004 R08: ffff88007d003e80 R09: 0000000000000008 R10: 0000000000000003 R11: 0000000000000001 R12: 0000000000000004 R13: ffff88002f580028 R14: 0000000000000000 R15: 0000000000000004 FS: 00007f35c29db700(0000) GS:ffff88007d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffeb04000172e0 CR3: 000000007038e000 CR4: 00000000000406f0 Call Trace: <IRQ> sg_copy_buffer+0xc6/0xf0 sdhci_tasklet_finish+0x170/0x260 [sdhci] tasklet_action+0xf4/0x100 __do_softirq+0xef/0x26e irq_exit+0xbe/0xd0 do_IRQ+0x4a/0xc0 common_interrupt+0xa2/0xa2 </IRQ> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rsi: fix error path handling in SDIO probeAmitkumar Karwar
We miss to release IRQ in certain error path in SDIO probe which causes following kernel panic. This patch corrects error path handling BUG: unable to handle kernel NULL pointer dereference at (null) IP: (null) PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI Call Trace: <IRQ> ? call_timer_fn+0x29/0x120 ? run_timer_softirq+0x1da/0x420 ? timer_interrupt+0x11/0x20 ? __do_softirq+0xef/0x26e ? irq_exit+0xbe/0xd0 ? do_IRQ+0x4a/0xc0 ? common_interrupt+0xa2/0xa2 </IRQ> ? cpuidle_enter_state+0x118/0x250 ? do_idle+0x186/0x1e0 ? cpu_startup_entry+0x6f/0x80 ? start_kernel+0x47c/0x49c ? secondary_startup_64+0xa5/0xb0 Fixes: 50117605770c ("rsi: improve RX handling in SDIO interface") Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rsi: remove redundant duplicate assignment of buffer_sizeColin Ian King
Variable buffer_size is re-assigned the same value, this duplicated assignment is redundant and can be removed. Cleans up clang warning: drivers/net/wireless/rsi/rsi_91x_usb.c:140:4: warning: Value stored to 'buffer_size' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rsi: Remove stack VLA usageTobin C. Harding
The use of stack Variable Length Arrays needs to be avoided, as they can be a vector for stack exhaustion, which can be both a runtime bug (kernel Oops) or a security flaw (overwriting memory beyond the stack). Also, in general, as code evolves it is easy to lose track of how big a VLA can get. Thus, we can end up having runtime failures that are hard to debug. As part of the directive[1] to remove all VLAs from the kernel, and build with -Wvla. Currently rsi code uses a VLA based on a function argument to `rsi_sdio_load_data_master_write()`. The function call chain is Both these functions rsi_sdio_reinit_device() rsi_probe() start the call chain: rsi_hal_device_init() rsi_load_fw() auto_fw_upgrade() ping_pong_write() rsi_sdio_load_data_master_write() [Without familiarity with the code] it appears that none of the 4 locks mutex rx_mutex tx_mutex tx_bus_mutex are held when `rsi_sdio_load_data_master_write()` is called. It is therefore safe to use kmalloc with GFP_KERNEL. We can avoid using the VLA by using `kmalloc()` and free'ing the memory on all exit paths. Change buffer from 'u8 array' to 'u8 *'. Call `kmalloc()` to allocate memory for the buffer. Using goto statement to call `kfree()` on all return paths. It can be expected that this patch will result in a small increase in overhead due to the use of `kmalloc()` however this code is only called on initialization (and re-initialization) so this overhead should not degrade performance. [1] https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27mwifiex: remove warnings in mwifiex_cmd_append_11n_tlv()Ganapathi Bhat
Fix the following sparse warning in mwifiex_cmd_append_11n_tlv: drivers/net/wireless/marvell/mwifiex/11n.c:358:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:358:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:358:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:360:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:360:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:360:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:366:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:366:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:366:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:368:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:368:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:368:65: right side has type int Fixes: 77423fa73927 ("mwifiex: fix incorrect ht capability problem") Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27wireless: Use octal not symbolic permissionsJoe Perches
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27net: Spelling s/stucture/structure/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-27treewide: Fix typos in printkMasanari Iida
This patch fixes spelling typos found in printk. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-27Bluetooth: btrsi: rework dependenciesArnd Bergmann
The linkage between the bluetooth driver and the wireless driver is not defined properly, leading to build problems such as: warning: (BT_HCIRSI) selects RSI_COEX which has unmet direct dependencies (NETDEVICES && WLAN && WLAN_VENDOR_RSI && BT_HCIRSI && RSI_91X) drivers/net/wireless/rsi/rsi_91x_main.o: In function `rsi_read_pkt': (.text+0x205): undefined reference to `rsi_bt_ops' As the dependency is actually the reverse (RSI_91X uses the BT_RSI driver, not the other way round), this changes the dependency to match, and enables the bluetooth driver from the RSI_COEX symbol. Fixes: 38aa4da50483 ("Bluetooth: btrsi: add new rsi bluetooth driver") Acked-by; Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.17. Major changes: wil6210 * support multiple virtual interfaces
2018-03-26Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-03-26 This patch series adds the ice driver, which will support the Intel(R) E800 Series of network devices. This is the first phase in the release of this driver where we implement basic transmit and receive. The idea behind the multi-phase release is to aid in code review as well as testing. Subsequent phases will implement advanced features (like SR-IOV, tunnelling, flow director, QoS, etc.) that build upon the previous phase(s). Each phase will be submitted as a patch series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26i40e: add support for XDP_REDIRECTBjörn Töpel
The driver now acts upon the XDP_REDIRECT return action. Two new ndos are implemented, ndo_xdp_xmit and ndo_xdp_flush. XDP_REDIRECT action enables XDP program to redirect frames to other netdevs. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26i40e: tweak page counting for XDP_REDIRECTBjörn Töpel
This commit tweaks the page counting for XDP_REDIRECT to function properly. XDP_REDIRECT support will be added in a future commit. The current page counting scheme assumes that the reference count cannot decrease until the received frame is sent to the upper layers of the networking stack. This assumption does not hold for the XDP_REDIRECT action, since a page (pointed out by xdp_buff) can have its reference count decreased via the xdp_do_redirect call. To work around that, we now start off by a large page count and then don't allow a refcount less than two. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26i40e: re-number feature flags to remove gapsJacob Keller
Remove the gaps created by the recent refactor of various feature flags that have moved to the state field. Use only a u32 now that we have fewer than 32 flags in the field. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26net/mlx5e: Sync netdev vxlan ports at openShahar Klein
When mlx5_core is loaded it is expected to sync ports with all vxlan devices so it can support vxlan encap/decap. This is done via udp_tunnel_get_rx_info(). Currently this call is set in mlx5e_nic_enable() and if the netdev is not in NETREG_REGISTERED state it will not be called. Normally on load the netdev state is not NETREG_REGISTERED so udp_tunnel_get_rx_info() will not be called. Moving udp_tunnel_get_rx_info() to mlx5e_open() so it will be called on netdev UP event and allow encap/decap. Fixes: 610e89e05c3f ("net/mlx5e: Don't sync netdev state when not registered") Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Avoid using the ipv6 stub in the TC offload neigh update pathOr Gerlitz
Currently we use the global ipv6_stub var to access the ipv6 global nd table. This practice gets us to troubles when the stub is only partially set e.g when ipv6 is loaded under the disabled policy. In this case, as of commit 343d60aada5a ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument") the stub is not null, but stub->nd_tbl is and we crash. As we can access the ipv6 nd_tbl directly, the fix is just to avoid the reference through the stub. There is one place in the code where we issue ipv6 route lookup and keep doing it through the stub, but that mentioned commit makes sure we get -EAFNOSUPPORT from the stack. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Fix memory usage issues in offloading TC flowsJianbo Liu
For NIC flows, the parsed attributes are not freed when we exit successfully from mlx5e_configure_flower(). There is possible double free for eswitch flows. If error is returned from rhashtable_insert_fast(), the parse attrs will be freed in mlx5e_tc_del_flow(), but they will be freed again before exiting mlx5e_configure_flower(). To fix both issues we do the following: (1) change the condition that determines if to issue the free call to check if this flow is NIC flow, or it does not have encap action. (2) reorder the code such that that the check and free calls are done before we attempt to add into the hash table. Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow') Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Fix traffic being dropped on VF representorRoi Dayan
Increase representor netdev RQ size to avoid dropped packets. The current size (two) is just too small to keep up with conventional slow path traffic patterns. Also match the SQ size to the RQ size. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Verify coalescing parameters in rangeMoshe Shemesh
Add check of coalescing parameters received through ethtool are within range of values supported by the HW. Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx5 modify cq limits the coalescing time parameter to 12 bit and coalescing frames parameters to 16 bits. Return out of range error if user tries to set these parameters to higher values. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5: Make eswitch support to depend on switchdevOr Gerlitz
Add dependancy for switchdev to be congfigured as any user-space control plane SW is expected to use the HW switchdev ID to locate the representors related to VFs of a certain PF and apply SW/offloaded switching on them. Fixes: e80541ecabd5 ('net/mlx5: Add CONFIG_MLX5_ESWITCH Kconfig') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Use 32 bits to store VF representor SQ numberOr Gerlitz
SQs are 32 and not 16 bits, hence it's wrong to use only 16 bits to store the sq number for which are going to set steering rule, fix that. Fixes: cb67b832921c ('net/mlx5e: Introduce SRIOV VF representors') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Don't override vport admin link state in switchdev modeJianbo Liu
The vport admin original link state will be re-applied after returning back to legacy mode, it is not right to change the admin link state value when in switchdev mode. Use direct vport commands to alter logical vport state in netdev representor open/close flows rather than the administrative eswitch API. Fixes: 20a1ea674783 ('net/mlx5e: Support VF vport link state control for SRIOV switchdev mode') Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26i40e: stop using cmpxchg flow in i40e_set_priv_flags()Jacob Keller
Now that the only places which modify flags are either (a) during initialization prior to creating a netdevice, or (b) while holding the rtnl lock, we no longer need the cmpxchg64 call in i40e_set_priv_flags. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26i40e: hold the RTNL lock while changing interrupt schemesJacob Keller
When we suspend and resume, we need to clear and re-enable the interrupt scheme. This was previously not done while holding the RTNL lock, which could be problematic, because we are actually destroying and re-creating queues. Hold the RTNL lock for the entire sequence of preparing for reset, and when resuming. This additionally protects the flags related to interrupt scheme under RTNL lock so that their modification is properly threaded. This is part of a larger effort to remove the need for cmpxchg64 in i40e_set_priv_flags(). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26i40e: move client flags into state bitsJacob Keller
The iWarp client flags are all potentially changed when the RTNL lock is not held, so they should not be part of the pf->flags variable. Instead, move them into the state field so that we can use atomic bit operations. This is part of a larger effort to remove cmpxchg64 in i40e_set_priv_flags() Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26i40e: move I40E_FLAG_TEMP_LINK_POLLING to state fieldJacob Keller
This flag is modified outside of the RTNL lock and thus should not be part of the pf->flags variable. Use a state bit instead, so that we can use atomic bit operations. This is part of a larger effort to remove cmpxchg64 in i40e_set_priv_flags() Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26net/mlx5e: Add VLAN offload features to hw_enc_featuresAviv Heller
We support outer VLAN offload in driver and HW regardless of whether an encapsulation is present in the next headers. Exposing this in hw_enc_features will allow us to offload outer VLANs in cases where encapsulation protocols like VXLAN and IPsec are used. Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Add a helper macro in set features ndoGal Pressman
Add a new macro to prevent copy-pasting the same code for each new feature. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Make choose LRO timeout function staticGal Pressman
The function is used in en_main.c only, we can make it static and remove its declaration from en.h Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Remove redundant check in get ethtool statsGal Pressman
ethtool core code makes sure data isn't NULL before calling get_ethtool_stats, testing it again in the driver is redundant. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5: Protect from command bit overflowLeon Romanovsky
The system with CONFIG_UBSAN enabled on produces the following error during driver initialization. The reason to it that max_reg_cmds can be larger enough to cause to "1 << max_reg_cmds" overflow the unsigned long. ================================================================================ UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/cmd.c:1805:42 signed integer overflow: -2147483648 - 1 cannot be represented in type 'int' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-00032-g06cda2358d9b-dirty #724 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xe9/0x18f ? dma_virt_alloc+0x81/0x81 ubsan_epilogue+0xe/0x4e handle_overflow+0x187/0x20c mlx5_cmd_init+0x73a/0x12b0 mlx5_load_one+0x1c3d/0x1d30 init_one+0xd02/0xf10 pci_device_probe+0x26c/0x3b0 driver_probe_device+0x622/0xb40 __driver_attach+0x175/0x1b0 bus_for_each_dev+0xef/0x190 bus_add_driver+0x2db/0x490 driver_register+0x16b/0x1e0 __pci_register_driver+0x177/0x1b0 init+0x6d/0x92 do_one_initcall+0x15b/0x270 kernel_init_freeable+0x2d8/0x3d0 kernel_init+0x14/0x190 ret_from_fork+0x24/0x30 ================================================================================ Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Offload tc vlan push/pop using HW actionOr Gerlitz
Currently, we are emulating the offload of vlan push/pop actions using global setup as done by commit f5f82476090f ("net/mlx5: E-Switch, Support VLAN actions in the offloads mode"). With newer NICs, we can apply a flow action for that matter, do that while keeping the emulated path for the older HW brands. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5: Add core support for vlan push/pop steering actionOr Gerlitz
Newer NICs (ConnectX-5 and onward) can apply vlan pop or push as an action taking place during flow steering. Add the core bits for that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5: E-Switch, Use same source for offloaded actions checkOr Gerlitz
Align the checks for modify header and encap actions with the rest of the code. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Add interface down dropped packets statisticsMoshe Shemesh
Added the following packets drop counter: Rx interface down dropped packets - counts packets which were received while the ETH interface was down. This counter will be shown on ethtool as a new counter called rx_if_down_packets. The implementation allocates a q_counter for drop rq which gets all the received traffic while the interface is down. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5: Add packet dropped while vport down statisticsMoshe Shemesh
Added the following packets dropped while vport down statistics: Rx dropped while vport down - counts packets which were steered by e-switch to a vport, but dropped since the vport was down. This counter will be shown on ip link tool as part of the vport rx_dropped counter. Tx dropped while vport down - counts packets which were transmitted by a vport, but dropped due to vport logical link down. This counter will be shown on ip link tool as part of the vport tx_dropped counter. The counters are read from FW by command QUERY_VNIC_ENV. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Add vnic steering drop statisticsMoshe Shemesh
Added the following packets drop counter: Rx steering missed dropped packets - counts packets which were dropped due to miss on NIC rx steering rules. This counter will be shown on ethtool as a new counter called rx_steer_missed_packets. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5: Add support for QUERY_VNIC_ENV commandMoshe Shemesh
Add support for new FW command QUERY_VNIC_ENV. The command is used by the driver to query vnic diagnostic statistics from FW. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-13 07:53:24 +0000