summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-10-03mwifiex: correct AMSDU aggregation checkAmitkumar Karwar
The commit "mwifiex: remove list traversal.."(fcf2176c87..) wrongly modifies AMSDU aggregation check. Due to this even though packet size for iperf traffic is already large, we unnecessarily try to aggregate them which adds some delay. If Tx iperf is started on UUT for 30 seconds, UUT keeps sending Tx packets for few more seconds. That commit is reverted to fix the problem. Also, MIN_NUM_AMSDU check is moved inside the loop to optimize the loop. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03ath9k_htc: add AVM FRITZ!WLAN 11N v2 supportLuis R. Rodriguez
This was reported and tested by Martin Walter over at AVM GmbH Berlin. This also applies to 3.0.1 so sendint to stable. Cc: s.kirste@avm.de Cc: d.friedel@avm.de Cc: Martin Walter <m.walter@avm.de> Cc: Peter Grabienski <pgrabien@qca.qualcomm.com> Cc: stable@kernel.org Tested-by: Martin Walter <m.walter@avm.de> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03Merge branch 'for-linville' of git://github.com/kvalo/ath6klJohn W. Linville
2011-10-03pch_gbe: Fixed the issue on which a network freezesToshiharu Okada
The pch_gbe driver has an issue which a network stops, when receiving traffic is high. In the case, The link down and up are necessary to return a network. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03pch_gbe: Fixed the issue on which PC was frozen when link was downed.Toshiharu Okada
When a link was downed during network use, there is an issue on which PC freezes. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03net: xen-netback: correctly restart Tx after a VM restore/migrateDavid Vrabel
If a VM is saved and restored (or migrated) the netback driver will no longer process any Tx packets from the frontend. xenvif_up() does not schedule the processing of any pending Tx requests from the front end because the carrier is off. Without this initial kick the frontend just adds Tx requests to the ring without raising an event (until the ring is full). This was caused by 47103041e91794acdbc6165da0ae288d844c820b (net: xen-netback: convert to hw_features) which reordered the calls to xenvif_up() and netif_carrier_on() in xenvif_connect(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03tehuti: shorten PCI device table.françois romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03drivers/net/ethernet: remove unused #define.françois romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03rtl8150: removal of forward declarations.françois romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03sc92031: use standard #defines from mii.h.françois romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03bnx2: don't request firmware when there's no userspace.françois romieu
The firmware is cached during the first successful call to open() and released once the network device is unregistered. The driver uses the cached firmware between open() and unregister_netdev(). It's similar to 953a12cc2889d1be92e80a2d0bab5ffef4942300 but the firmware is mandatory. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03net: sh_eth: fix build failureYoshihiro Shimoda
The following commit removed some including headers: "net: sh_eth: move the asm/sh_eth.h to include/linux/" (commit id: d4fa0e35fdbd54acf791fa3793d6d17f7795f7ae) Then, the build failure happened on the linux-next: drivers/net/ethernet/renesas/sh_eth.c:601: error: 'THIS_MODULE' undeclared here (not in a function) drivers/net/ethernet/renesas/sh_eth.c:1970: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/renesas/sh_eth.c:1970: warning: data definition has no type or storage class drivers/net/ethernet/renesas/sh_eth.c:1970: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/net/ethernet/renesas/sh_eth.c:1970: warning: function declaration isn't a prototype drivers/net/ethernet/renesas/sh_eth.c:1971: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/renesas/sh_eth.c:1971: warning: data definition has no type or storage class drivers/net/ethernet/renesas/sh_eth.c:1971: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/net/ethernet/renesas/sh_eth.c:1971: warning: function declaration isn't a prototype drivers/net/ethernet/renesas/sh_eth.c:1972: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/renesas/sh_eth.c:1972: warning: data definition has no type or storage class drivers/net/ethernet/renesas/sh_eth.c:1972: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/net/ethernet/renesas/sh_eth.c:1972: warning: function declaration isn't a prototype This patch fixes the issue. This patch also get back include/kernel.h and linux/spinlock.h. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03bonding: properly stop queuing work when requestedAndy Gospodarek
During a test where a pair of bonding interfaces using ARP monitoring were both brought up and torn down (with an rmmod) repeatedly, a panic in the timer code was noticed. I tracked this down and determined that any of the bonding functions that ran as workqueue handlers and requeued more work might not properly exit when the module was removed. There was a flag protected by the bond lock called kill_timers that is set when the interface goes down or the module is removed, but many of the functions that monitor link status now unlock the bond lock to take rtnl first. There is a chance that another CPU running the rmmod could get the lock and set kill_timers after the first check has passed. This patch does not allow any function to queue work that will make itself run unless kill_timers is not set. I also noticed while doing this work that bond_resend_igmp_join_requests did not have a check for kill_timers, so I added the needed call there as well. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reported-by: Liang Zheng <lzheng@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03be2net: Making die temperature ioctl call asyncSomnath Kotur
Also changing it's frequency to once every 64s instead of existing 32s as it was shown to affect performance Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03be2net: Modified PCI MaxReadReq size to 4096 bytesSomnath Kotur
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03be2net: Fixed Endianness issues in the response read log length field while ↵Somnath Kotur
retrieving FAT data This was manifesting as a crash when FAT Dump extraction was attempted on a PPC machine. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03be2net: Change the data type of the 'on die temperature' stat.Somnath Kotur
This was showing up as junk value on PPC /Big endian machines since it was marked as a byte. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03be2net: Add 60 second delay to allow FAT dump completion on recovery from EEHSomnath Kotur
Add 60s delay before timeout on polling Bit 31 so that FAT dump can complete when reset occurs. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03ath6kl: include vmalloc.h in debug.cKalle Valo
Fixes compilation errors when compiling for ARM: ath6kl/debug.c:312: error: implicit declaration of function 'vmalloc' ath6kl/debug.c:312: warning: assignment makes pointer from integer without a cast ath6kl/debug.c:342: error: implicit declaration of function 'vfree' ath6kl/debug.c:696: warning: assignment makes pointer from integer without a cast ath6kl/debug.c:871: warning: assignment makes pointer from integer without a cast Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-10-01ath6kl: fix size_t related warningsKalle Valo
My earlier debug log additions added these warnings when compiling 64 bit kernels: ath6kl/init.c:962: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:975: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:988: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:1009: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:1192: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' ath6kl/init.c:1236: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' ath6kl/init.c:1267: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Reported-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-30netdev/phy/icplus: Use mdiobus_write() and mdiobus_read() for proper locking.David Daney
Usually you have to take the bus lock. Why not here too? I saw this when working on something else. Not even compile tested. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Greg Dietsche <Gregory.Dietsche@cuw.edu> Cc: "Uwe Kleine-Konig" <u.kleine-koenig@pengutronix.de> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30netdev/phy: Use mdiobus_read() so that proper locks are taken.David Daney
Accesses to the mdio busses must be done with the mdio_lock to ensure proper operation. Conveniently we have the helper function mdiobus_read() to do that for us. Lets use it in get_phy_id() instead of accessing the bus without the lock held. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30mac80211: implement uAPSDJohannes Berg
Add uAPSD support to mac80211. This is probably not possible with all devices, so advertising it with the cfg80211 flag will be left up to drivers that want it. Due to my previous patches it is now a fairly straight-forward extension. Drivers need to have accurate TX status reporting for the EOSP frame. For drivers that buffer themselves, the provided APIs allow releasing the right number of frames, but then drivers need to set EOSP and more-data themselves. This is documented in more detail in the new code itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: let drivers inform it about per TID buffered framesJohannes Berg
For uAPSD implementation, it is necessary to know on which ACs frames are buffered. mac80211 obviously knows about the frames it has buffered itself, but with aggregation many drivers buffer frames. Thus, mac80211 needs to be informed about this. For now, since we don't have APSD in any form, this will unconditionally set the TIM bit for the station but later with uAPSD only some ACs might cause the TIM bit to be set. ath9k is the only driver using this API and I only modify it in the most basic way, it won't be able to implement uAPSD with this yet. But it can't do that anyway since there's no way to selectively release frames to the peer yet. Since drivers will buffer frames per TID, let them inform mac80211 on a per TID basis, mac80211 will then sort out the AC mapping itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30iwlagn: iwl-agn-rs: remove unnecessary null check for sta and lq_staGreg Dietsche
both sta and lq_sta are guaranteed to be not null in the calling function so we don't need to check them here. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k/ath9k_htc: Fix PS wrappers for RF killMohammed Shafi Shajakhan
ath9k_hw_gpio_get reads the GPIO in/out registers to get the status of GPIO pins, so use PS wrappers Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30rtlwifi: Remove unused _usb_nbytes_read_write and _usb_writeN_syncLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30rtlwifi: Remove unused routine _usb_readN_syncLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: add cfg80211 handlers add/del_virtual_intfYogesh Ashok Powar
Making adding and deleting virtual interfaces dynamic. Adding handlers for creating and deleting virtual interface with given name and dev respectively. Also, creating default interface of type station on insmod of the driver. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: fix Tx data rate display issueAmitkumar Karwar
"iw dev mlan0 link" shows wrong data rate, because data rate is not sent properly to cfg80211 stack. Also stack is not updated with mcs and Tx data flags information. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: remove unreachable codeAmitkumar Karwar
In disconnected state "iw dev mlan0 link" command will return from cfg80211 stack itself. We also have an error check in mwifiex_cfg80211_get_station() routine. Therefore the code under "if (!priv->media_connected)" condition in mwifiex_rate_ioctl_get_rate_value() routine becomes unreachable. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: remove unnecessary mwifiex_dump_station_info() callAmitkumar Karwar
An extra call to mwifiex_dump_station_info() routine in get_station callback function is redundant Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k: Remove redundant my beacon check at ath_rx_ps_beaconRajkumar Manoharan
Make use of the rx status's is_mybeacon in order to avoid redundant memcmp. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k: Remove unnecessary AMPDU check at tx statusRajkumar Manoharan
Fill the ampdu_[ack]_len for both aggregation and normal frames. So that we could avoid unnecesary conditional at tx status. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30wireless: at76c50x: use native hex_pack_byte() methodAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "John W. Linville" <linville@tuxdriver.com> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/wl12xx/main.c
2011-09-29bna: Driver Version changed to 3.0.2.2Rasesh Mody
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Add Callback to Fix RXQ StopRasesh Mody
Change details: - Add a callback in the BNA, which is called before sending FW command to stop RxQs. After this callback is called, driver should not post anymore Rx buffers to the RxQ. This addresses a small window where driver posts Rx buffers while FW is stopping/has stopped the RxQ. - Registering callback function, rx_stall_cbfn, during bna_rx_create. Invoking callback function, rx_stall_cbfn, before sending rx_cfg_clr command to FW - Bnad_cb_rx_stall implementation - set a flag in the Rxq to mark buffer posting disabled state. While posting buffers check for the above flag. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: PLL Init Fix and Add Stats AttributesRasesh Mody
Change details: - Fix to release soft reset in PLL init for HW - Added stats attributes and new bfi msg class - Removed some unused code and typo fixes Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Brocade 1860 HW EnablementRasesh Mody
This patch enables new HW Brocade 1860. Add BFA_CM_NIC capability mask to bfa_ioc_attr, Sub-System Device ID Info and support for Brocade 1860 device ID to bfa_ioc.c and bnad.c. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Implement FW Download for New HWRasesh Mody
Add new device ID 0x22 and new asic generation BFI_ASIC_GEN_CT2 for 1860. Implement FW download from user space for new Brocade HW. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Capability Map and MFG Block Changes for New HWRasesh Mody
Add capability map and generic model name scheme for manufacturing block. Add card types for new HW. Remove bfa_mfg_is_card_type_valid and ibfa_mfg_adapter_prop_init_flash_ct macros. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Brocade 1860 IOC PLL, Reg Defs and ASIC Mode ChangesRasesh Mody
Add logic to set ASIC specfic interface in IOC, HW interface initialization APIs, mode based initialization and MSI-X resource allocation for 1860 with no asic block. Add new h/w specific register definitions and setup registers used by IOC logic. Use normal kernel declaration style, c99 initializers and const for mailbox structures. Remove unneeded parentheses. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29Merge git://github.com/Jkirsher/net-nextDavid S. Miller
2011-09-29usbnet: add timestamping supportMichael Riesch
In order to make USB-to-Ethernet-adapters (depending on usbnet) support timestamping, the "skb_defer_rx_timestamp" and "skb_tx_timestamp" function calls are added. Signed-off-by: Michael Riesch <michael@riesch.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29net/fec: add poll controller function for fec nicXiao Jiang
Add poll controller function for fec nic. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29net/fec: replace hardcoded irq num with macroXiao Jiang
Don't use hardcoded irq num and replace it with FEC_IRQ_NUM macro. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28ixgbe: add ECC warning for legacy interruptsDon Skidmore
Noticed that the legacy Interrupt handler didn't have the same ECC warning as did the MSI. So this patch adds it. Signed-off-by: Don Skidmore <donald.c.skidmore> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-28ixgbe: cleanup ixgbe_setup_gpie() for X540Don Skidmore
The X540 thermal sensor interrupt isn't a General Purpose Interrupt so doesn't need to be enabled in ixgbe_setup_gpie(). Likewise X540 doesn't use the SDP0 for thermal sensor so it doesn't need to be enabled for any device other than 82599. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-28ixgbe add thermal sensor support for x540 hardwareJacob Keller
Add code to enable thermal sensors for the x540 hardware, as well as a thermal interrupt check which will exit with a critical message of a thermal overheat is detected. Intent of code allows other mac types to be added with different configuration in the future. Fixed in this version is the addition of setting the temp_sensor capable flag which was previously only set for a specific mac. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 23:39:29 +0000