summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-09-15stmmac: remove the mmc code (v3)Giuseppe CAVALLARO
DWMAC Management Counters (MMC) are not fully support. The minimal support added in the past allowed to only disable counters (if present) and mask their interrupts. This patch prepares the driver to support the MMC removing obsolete code. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15stmmac: remove the STBus bridge setting from the GMAC code (v3)Giuseppe CAVALLARO
This patch removes a piece of code (actually commented) only useful for some ST platforms in the past. This kind of setting now can be done by using the platform callbacks provided in linux/stmmac.h (see the stmmac.txt for further details). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15Merge branch 'master' of git://git.infradead.org/users/linville/wireless ↵John W. Linville
into for-davem
2011-09-15bna: Driver Version changed to 3.0.2.1Rasesh Mody
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: SKB PCI UNMAP FixRasesh Mody
Change details: - Found a leak in sk_buff unmapping of PCI dma addresses where boundary conditions are not properly handled in freeing all Tx buffers. Freeing of all Tx buffers is done considering sk_buffs data and fragments can be mapped at the boundary. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: TX Queue Depth FixRasesh Mody
sk_buff unmap_array grows greater than 65536 (x2) with Tx ring of 65536. Reducing TXQ depth and safe(max) acking of Tx events to 32768 (same as Rx). Add defines for TX and RX queue depths. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: MBOX IRQ Flag Check after LockingRasesh Mody
Change details: - Check the BNAD_RF_MBOX_IRQ_DISABLED flag after acquiring the bna_lock, since checking the flag and executing bna_mbox_handler needs to be atomic. If not, it opens up window where flag is reset when it was checked, but got set while spinning on the lock by the other thread which is actually holding the lock Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Async Mode Tx Rx Init FixRasesh Mody
Change details: - Async mode of Tx/Rx queue initialization in BNAD from a task queue context runs into non-unique taskq allocation issues. Get rid of Tx/Rx initialization from task q context - In the attach function, wait for IOC enable, then do Tx/Rx queue initialization. Default BNA attributes are used when IOC enable from attach fails and values are set to: 1 TxQ, 1 RxQ, 1 Unicast MAC, 1 RIT entry Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Ethtool Enhancements and FixRasesh Mody
Change details: - Add tx_skb counters and NAPI debug counters to ethtool stats. - Add rlb stats strings to bnad_net_stats_strings{} array. rlb_stats field was added to struct bfi_enet_stats {} but the corresponding name structure array for ethtool was not initialized with right strings, even though the actual name structure array got expanded. This caused a NULL pointer violation and a crash when doing ehtool -S <if_name>. - Modify dim timer stop logic to make it dependent on cfg and run flags - While setting the ring parameter restore the rx, vlan configuration and set rx mode - Indentation fix Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Initialization and Locking FixRasesh Mody
Change details: - Initialize rx_id to 0 for bnad_cleanup_rx - Return -ENOMEM in case if bna_rx_create fails - Count the Rx buffer allocation failures in bnad_alloc_n_post_rxbufs() - Remove unnecessary initialization of using_dac to false in bnad_pci_probe - Release lock if error while doing bna_num_txq_set in bnad_pci_probe Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Formatting and Code CleanupRasesh Mody
Change details: - Print log messages when running with reduced number of MSI-X vectors and when defaulting to INTx mode. - Remove BUG_ONs and header file inclusion that are not needed - Comments addition/cleanup - Unused code cleanup - Add New Line to Print msg in bfa_sm_fault - Formatting fix Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: TX Path and RX Path ChangesRasesh Mody
Change details: - Add bnad_pci_unmap_skb() API to unmap skb from transmit path and update the unmap index. Add more checks for illegal skbs in transmit path. Add tx_skb counters for dropped skbs. - The unmap_cons index used in bnad_free_txbufs() is incorrectly declared as u16. It quickly wraps around and accesses null sk_buff ptr. So using u32 to handle unmap_array. - Disable and enable interrupts from the same polling context to prevent reordering in Rx path. - Add Rx NAPI debug counters. - Make NAPI budget check more generic. - Modify dim timer stop logic to make it dependent on cfg and run flags - Handle reduced MSI-X vectors case in bnad_enable_msix. - Check for single frame TSO skbs and send them out as non-TSO. - Put memory barrier after bna_txq_prod_indx_doorbell(). Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Interrupt Polling and NAPI Init ChangesRasesh Mody
Change details: - Remove unnecessary ccb check from bnad_poll_cq - Add bnad pointer to rx_ctrl structure, so that bnad can be accessed directly from rx_ctrl in the NAPI poll routines, even if ccb is NULL - Validate ccb before referencing to it in bnad_msix_rx and bnad_napi_poll_rx - Fix the order of NAPI init / uninit in Tx / Rx setup / teardown path: a. Kill bnad tx free tasklet ahead of call to bna_tx_destroy() b. Call NAPI disable only after call to Rx free_irq(). This makes sure Rx interrupt does not schedule a poll when NAPI is already disabled - NAPI poll runs before the h/w has completed configuration. This causes a crash. Delay enabling NAPI till after bna_rx_enable(). Split NAPI initialization into 2 steps, bnad_napi_init() & bnad_napi_enable(). Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: PCI Probe FixRasesh Mody
Change details: - Return error as -EIO if bnad_res_alloc fails - Release the configuration lock before registering with net_device layer. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Naming Change and Minor Macro FixRasesh Mody
Naming changes: rename devid, BNAD_MAX_TXS, BNAD_MAX_RXS, BNAD_MAX_RXPS_PER_RX to device, BNAD_MAX_TX, BNAD_MAX_RX, BNAD_MAX_RXP_PER_RX respectively and change all the references. Macro Fix: Add ioc_isr_mod_set check to bfa_nw_ioc_mbox_regisr macro Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15r8169: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15qlge: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15qlcnic: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15qla3xxx: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15pasemi: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Olof Johansson <olof@lixom.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15ns83820: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15niu: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15netxen: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15mv643xx: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15macvtap: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15ksz884x: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15jme: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15ibmveth: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Santiago Leon <santil@linux.vnet.ibm.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15ipheth: iPhone 4 Verizon CDMA USB Product ID addKavan Smith
Add USB product ID for iPhone 4 CDMA Verizon Tested on at least 2 devices Signed-off-by: Kavan Smith <kavansmith82@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: Fix for a host coalescing bug which impared latency.Ariel Elior
Seperated Rx and Tx coalescing to different state machines. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: don't access removed registers on 57712 and aboveDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: init fw_seq after undi_unload is doneDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: don't reset device while reading its configuration.Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: fix MF for 4-port devicesDmitry Kravkov
Number of VNs for 4-port devices is 2 instead of 4 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: fix rx ring size reportVladislav Zolotarov
Store the size in bp, read from bp when queried. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: decrease print level to debugDmitry Kravkov
It may happen every link toggle. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: fix BRB thresholds for dropless_fc modeDmitry Kravkov
Fix the thresholds according to 5778x HW and increase rx_ring size to suit new thresholds in dropless_fc mode. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15Merge branch 'master' into for-nextJiri Kosina
Fast-forward merge with Linus to be able to merge patches based on more recent version of the tree.
2011-09-15libertas_tf: deb_defs.h: Fix typo in include guardKartik Mohta
Signed-off-by: Kartik Mohta <kartikmohta@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-15ipw2x00: comment typo fix encryptiong to encryptionJustin P. Mattock
The below patch fixes a typo. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-15treewide: typo 'interrrupt' word corrections.Vitaliy Ivanov
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-14libertas: prioritize usb8388_olpc.bin firmware on OLPC machinesAndres Salomon
Normally, the v9 firmware will be loaded if it's available. However, on OLPC XO-1 machines, the olpc-specific firmware supports extra functionality. This makes the libertas driver attempt to load the custom firmware first if the machine is an OLPC machine; if that fails (or it's not an OLPC machine), fall back to attempting to load the other firmwares. usb8388_olpc.bin is currently found in the linux-firmware repository. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14rt2x00: Use the available helper functions to initialize the WCID tableHelmut Schaa
Use rt2800_config_wcid and rt2800_delete_wcid_attr to initialize the WCID table instead of writing to the registers directly. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14rt2x00: Forbid aggregation for STAs not programmed into the hwHelmut Schaa
If a STA is not known by the hw (i.e. has no WCID assigned) don't allow aggregation since this might mess up tx status reports and we won't be able to distinguish the reports of multiple WCID-less STAs. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14rt2x00: Make use of sta_add/remove callbacks in rt2800Helmut Schaa
This allows us to assign a WCID to each STA even for STAs without crypto key. To achieve this search for an unused WCID in the HW WCID table and assign it to the according STA. When configuring a pairwise key for this STA we don't need to write the MAC address and BSSIDX anymore but just update the crypto related fields in the WCID_ATTR table. This has two advantages: 1) Setting a new key for an already available STA (PTK rekeying) is slightly less expensive and should improve performance in situations where a lot of rekeying happens (e.g. a huge number of stations and/or a small rekeying interval) 2) The TXWI now gets a WCID assigned for unencrypted frames which will be reflected in the corresponding tx status report. This should make tx status reports in unencrypted AP mode more reliable as we can distinguish between multiple key-less STAs. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14rt2x00: Add WCID to HT TX descriptorHelmut Schaa
When sending an unencrypted frame to a STA the driver might want to pass a suitable WCID since we don't have a key index to allow tx status reports to get properly assigned to the correct STA. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14rt2x00: Add WCID to crypto structHelmut Schaa
When a WCID was already assigned to a STA the key configuration functions need to use the same WCID for configuring the keys. Hence, add the WCID to the crypo configuration structure. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14rt2x00: Introduce sta_add/remove callbacksHelmut Schaa
This implements a basic sta_add and sta_remove callback. Introduce a new structure rt2x00_sta and ask mac80211 to allocate it as private part of its ieee80211_sta. rt2x00_sta only contains the WCID for now. The sta_add callback allows the driver to assign a WCID to a station that is currently being added. The same wcid is also passed to the sta_remove callback one mac80211 removes this STA. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14rt2x00: Move bssidx calculation into its own functionHelmut Schaa
This will be used by a later patch. No functional changes. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14rt2x00: Avoid unnecessary uncachedHelmut Schaa
Reading the TX desciptor words from coherent memory is always uncached and potentially slow. Hence, don't read the TX descriptor prior to writing it since we update all fields anyway. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-16 22:38:42 +0000