summaryrefslogtreecommitdiff
path: root/drivers/nvme
AgeCommit message (Collapse)Author
2020-07-08nvme-pci: fix some comments issuesBaolin Wang
Fix comment typos and remove whitespaces before tabs to cleanup checkpatch errors. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme-pci: remove redundant segment validationBaolin Wang
We've validated the segment counts before calling nvme_map_data(), so there is no need to validate again in nvme_pci_use_sgls(, which is only called from nvme_map_data(). Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme: document quirked Intel modelsDavid Fugate
Documented model names of Intel SSDs requiring quirks. Signed-off-by: David Fugate <david.fugate@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme: expose reconnect_delay and ctrl_loss_tmo via sysfsSagi Grimberg
This is useful information, and moreover its it's useful to be able to alter these parameters per controller after it has been established. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme: support for zoned namespacesKeith Busch
Add support for NVM Express Zoned Namespaces (ZNS) Command Set defined in NVM Express TP4053. Zoned namespaces are discovered based on their Command Set Identifier reported in the namespaces Namespace Identification Descriptor list. A successfully discovered Zoned Namespace will be registered with the block layer as a host managed zoned block device with Zone Append command support. A namespace that does not support append is not supported by the driver. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Keith Busch <keith.busch@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme: support for multiple Command Sets Supported and Effects log pagesKeith Busch
The Commands Supported and Effects log page was extended with a CSI field that enables the host to query the log page for each command set supported. Retrieve this log page for each command set that an attached namespace supports, and save a pointer to that log in the namespace head. Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com> Reviewed-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <keith.busch@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme: implement multiple I/O Command Set supportNiklas Cassel
Implements support for multiple I/O Command Sets. NVMe TP 4056 introduces a method to enumerate multiple command sets per namespace. If the command set is exposed, this method for enumeration will be used instead of the traditional method that uses the CC.CSS register command set register for command set identification. For namespaces where the Command Set Identifier is not supported or recognized, the specific namespace will not be created. Reviewed-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme: use USEC_PER_SEC instead of magic numbersBaolin Wang
Use USEC_PER_SEC instead of magic numbers to make code more readable. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvmet-tcp: simplify nvmet_process_resp_listSagi Grimberg
We can make it shorter and simpler without some redundant checks. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme-tcp: optimize network stack with setting msg flags according to batch sizeSagi Grimberg
If we have a long list of request to send, signal the network stack that more is coming (MSG_MORE). If we have nothing else, signal MSG_EOR. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme-tcp: leverage request pluggingSagi Grimberg
blk-mq request plugging can improve the execution of our pipeline. When we queue a request we actually trigger our I/O worker thread yielding a context switch by definition. However if we know that there are more requests in the pipe that are coming, we are better off not trigger our I/O worker and only do that for the last request in the batch (bd->last). By having it, we improve efficiency by amortizing context switches over a batch of requests. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme-tcp: have queue prod/cons send list become a llistSagi Grimberg
The queue processing will splice to a queue local list, this should alleviate some contention on the send_list lock, but also prepares us to the next patch where we look on these lists for network stack flag optimization. Remove queue lock as its not used anymore. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> [hch: simplified a loop] Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme-fcloop: verify wwnn and wwpn formatDongli Zhang
The nvme host and target verify the wwnn and wwpn format via nvme_fc_parse_traddr(). For instance, it is required that the length of wwnn to be either 21 ("nn-0x") or 19 (nn-). Add this verification to nvme-fcloop so that the input should always be in hex and the length of input should always be 18. Otherwise, the user may use e.g. 0x2 to create fcloop local port, while 0x0000000000000002 is required for nvme host and target. This makes the requirement of format confusing. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvmet: use unsigned type for u64Chaitanya Kulkarni
In function nvmet_subsys_atte_version_show() which uses the NVME_XXX() macros related to version (of type u64) get rid of the int type cast when printing subsys version and use appropriate format specifier for u64. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvmet: introduce flags member in nvmet_fabrics_opsMax Gurtovoy
Replace has_keyed_sgls and metadata_support booleans with a flags member that will be used for adding more features in the future. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvmet-tcp: remove has_keyed_sgls initializationMax Gurtovoy
Since the nvmet_tcp_ops is static, there is no need to initialize values to zero. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvmet-loop: remove unused 'target_ctrl' in nvme_loop_ctrlDongli Zhang
This field is never used since the introduction of nvme loopback by commit 3a85a5de29ea ("nvme-loop: add a NVMe loopback host driver"). Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme-pci: remove the empty line at the beginning of nvme_should_reset()Dongli Zhang
Just cleanup by removing the empty line. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme-pci: code cleanup for nvme_alloc_host_mem()Chaitanya Kulkarni
Although use of for loop is preferred it is not a common practice to have 80 char long for loop initialization and comparison section. Use temp variables for calculating values and replace them in the for loop with size of all variables to set to u64 since preferred variable is declared as u64. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme-pci: use unsigned for io queue depthChaitanya Kulkarni
The NVMe PCIe declares module parameter io_queue_depth as int. Change this to u16 as queue depth can never be negative. Now to reflect this update module parameter getter function from param_get_int() -> param_get_uint() and respective setter function with type of n changed from int to u16 with param_set_int() to param_set_ushort(). Finally update struct nvme_dev q_depth member to u16 and use u16 in min_t() when calculating dev->q_depth in the nvme_pci_enable() (since q_depth is now u16) and use unsigned int instead of int when calculating dev->tagset.queue_depth as target variable tagset->queue_depth is of type unsigned int in nvme_dev_add(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme-core: use u16 type for ctrl->sqsizeChaitanya Kulkarni
In nvme_init_identify() when calculating submission queue size use u16 instead of int type in the min_t() since target variable ctrl->sqsize is of type u16. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08nvme-core: use u16 type for directivesChaitanya Kulkarni
In nvme_configure_directives() when calculating number of streams use u16 instead of unsigned type in the min_t() since target variable ctrl->nr_streams is of type u16. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08Merge tag 'v5.8-rc4' into for-5.9/driversJens Axboe
Merge in 5.8-rc4 for-5.9/block to setup for-5.9/drivers, to provide a clean base and making the life for the NVMe changes easier. Signed-off-by: Jens Axboe <axboe@kernel.dk> * tag 'v5.8-rc4': (732 commits) Linux 5.8-rc4 x86/ldt: use "pr_info_once()" instead of open-coding it badly MIPS: Do not use smp_processor_id() in preemptible code MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen .gitignore: Do not track `defconfig` from `make savedefconfig` io_uring: fix regression with always ignoring signals in io_cqring_wait() x86/ldt: Disable 16-bit segments on Xen PV x86/entry/32: Fix #MC and #DB wiring on x86_32 x86/entry/xen: Route #DB correctly on Xen PV x86/entry, selftests: Further improve user entry sanity checks x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER i2c: mlxcpld: check correct size of maximum RECV_LEN packet i2c: add Kconfig help text for slave mode i2c: slave-eeprom: update documentation i2c: eg20t: Load module automatically if ID matches i2c: designware: platdrv: Set class based on DMI i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665 mm/page_alloc: fix documentation error vmalloc: fix the owner argument for the new __vmalloc_node_range callers mm/cma.c: use exact_nid true to fix possible per-numa cma leak ...
2020-07-02nvme: fix a crash in nvme_mpath_add_diskChristoph Hellwig
For private namespaces ns->head_disk is NULL, so add a NULL check before updating the BDI capabilities. Fixes: b2ce4d90690b ("nvme-multipath: set bdi capabilities once") Reported-by: Avinash M N <Avinash.M.N@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
2020-07-02nvme: fix identify error status silent ignoreSagi Grimberg
Commit 59c7c3caaaf8 intended to only silently ignore non retry-able errors (DNR bit set) such that we can still identify misbehaving controllers, and in the other hand propagate retry-able errors (DNR bit cleared) so we don't wrongly abandon a namespace just because it happens to be temporarily inaccessible. The goal remains the same as the original commit where this was introduced but unfortunately had the logic backwards. Fixes: 59c7c3caaaf8 ("nvme: fix possible hang when ns scanning fails during error recovery") Reported-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-01block: remove the bd_queue field from struct block_deviceChristoph Hellwig
Just use bd_disk->queue instead. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: remove direct_make_requestChristoph Hellwig
Now that submit_bio_noacct has a decent blk-mq fast path there is no more need for this bypass. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: rename generic_make_request to submit_bio_noacctChristoph Hellwig
generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: move ->make_request_fn to struct block_device_operationsChristoph Hellwig
The make_request_fn is a little weird in that it sits directly in struct request_queue instead of an operation vector. Replace it with a block_device_operations method called submit_bio (which describes much better what it does). Also remove the request_queue argument to it, as the queue can be derived pretty trivially from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: remove the request_queue argument from blk_queue_splitChristoph Hellwig
The queue can be trivially derived from the bio, so pass one less argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24nvme-multipath: fix bogus request queue reference putSagi Grimberg
The mpath disk node takes a reference on the request mpath request queue when adding live path to the mpath gendisk. However if we connected to an inaccessible path device_add_disk is not called, so if we disconnect and remove the mpath gendisk we endup putting an reference on the request queue that was never taken [1]. Fix that to check if we ever added a live path (using NVME_NS_HEAD_HAS_DISK flag) and if not, clear the disk->queue reference. [1]: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 1372 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 CPU: 1 PID: 1372 Comm: nvme Tainted: G O 5.7.0-rc2+ #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:refcount_warn_saturate+0xa6/0xf0 RSP: 0018:ffffb29e8053bdc0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8b7a2f4fc060 RCX: 0000000000000007 RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8b7a3ec99980 RBP: ffff8b7a2f4fc000 R08: 00000000000002e1 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: fffffffffffffff2 R14: ffffb29e8053bf08 R15: ffff8b7a320e2da0 FS: 00007f135d4ca800(0000) GS:ffff8b7a3ec80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005651178c0c30 CR3: 000000003b650005 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: disk_release+0xa2/0xc0 device_release+0x28/0x80 kobject_put+0xa5/0x1b0 nvme_put_ns_head+0x26/0x70 [nvme_core] nvme_put_ns+0x30/0x60 [nvme_core] nvme_remove_namespaces+0x9b/0xe0 [nvme_core] nvme_do_delete_ctrl+0x43/0x5c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write+0xc1/0x1a0 vfs_write+0xb6/0x1a0 ksys_write+0x5f/0xe0 do_syscall_64+0x52/0x1a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: Anton Eidelman <anton@lightbitslabs.com> Tested-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-24nvme-multipath: fix deadlock due to head->lockAnton Eidelman
In the following scenario scan_work and ana_work will deadlock: When scan_work calls nvme_mpath_add_disk() this holds ana_lock and invokes nvme_parse_ana_log(), which may issue IO in device_add_disk() and hang waiting for an accessible path. While nvme_mpath_set_live() only called when nvme_state_is_live(), a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO. Since nvme_mpath_set_live() holds ns->head->lock, an ana_work on ANY ctrl will not be able to complete nvme_mpath_set_live() on the same ns->head, which is required in order to update the new accessible path and remove NVME_NS_ANA_PENDING.. Therefore IO never completes: deadlock [1]. Fix: Move device_add_disk out of the head->lock and protect it with an atomic test_and_set for a new NVME_NS_HEAD_HAS_DISK bit. [1]: kernel: INFO: task kworker/u8:2:160 blocked for more than 120 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u8:2 D 0 160 2 0x80004000 kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: nvme_update_ns_ana_state+0x22/0x60 [nvme_core] kernel: nvme_update_ana_state+0xca/0xe0 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: nvme_read_ana_log+0x76/0x100 [nvme_core] kernel: nvme_ana_work+0x15/0x20 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ret_from_fork+0x35/0x40 kernel: INFO: task kworker/u8:4:439 blocked for more than 120 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u8:4 D 0 439 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: efi_partition+0x1e6/0x708 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_mpath_add_disk+0xbe/0x100 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: nvme_scan_work+0x256/0x390 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ret_from_fork+0x35/0x40 Fixes: 0d0b660f214d ("nvme: add ANA support") Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-24nvme: don't protect ns mutation with ns->head->lockSagi Grimberg
Right now ns->head->lock is protecting namespace mutation which is wrong and unneeded. Move it to only protect against head mutations. While we're at it, remove unnecessary ns->head reference as we already have head pointer. The problem with this is that the head->lock spans mpath disk node I/O that may block under some conditions (if for example the controller is disconnecting or the path became inaccessible), The locking scheme does not allow any other path to enable itself, preventing blocked I/O to complete and forward-progress from there. This is a preparation patch for the fix in a subsequent patch where the disk I/O will also be done outside the head->lock. Fixes: 0d0b660f214d ("nvme: add ANA support") Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-24nvme-multipath: fix deadlock between ana_work and scan_workAnton Eidelman
When scan_work calls nvme_mpath_add_disk() this holds ana_lock and invokes nvme_parse_ana_log(), which may issue IO in device_add_disk() and hang waiting for an accessible path. While nvme_mpath_set_live() only called when nvme_state_is_live(), a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO. In order to recover and complete the IO ana_work on the same ctrl should be able to update the path state and remove NVME_NS_ANA_PENDING. The deadlock occurs because scan_work keeps holding ana_lock, so ana_work hangs [1]. Fix: Now nvme_mpath_add_disk() uses nvme_parse_ana_log() to obtain a copy of the ANA group desc, and then calls nvme_update_ns_ana_state() without holding ana_lock. [1]: kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: efi_partition+0x1e6/0x708 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: ? __switch_to_asm+0x34/0x70 kernel: ? select_task_rq_fair+0x1aa/0x5c0 kernel: ? kvm_sched_clock_read+0x11/0x20 kernel: ? sched_clock+0x9/0x10 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: nvme_read_ana_log+0x3a/0x100 [nvme_core] kernel: nvme_ana_work+0x15/0x20 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x35/0x40 Fixes: 0d0b660f214d ("nvme: add ANA support") Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-24nvme: fix possible deadlock when I/O is blockedSagi Grimberg
Revert fab7772bfbcf ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns") When adding a new namespace to the head disk (via nvme_mpath_set_live) we will see partition scan which triggers I/O on the mpath device node. This process will usually be triggered from the scan_work which holds the scan_lock. If I/O blocks (if we got ana change currently have only available paths but none are accessible) this can deadlock on the head disk bd_mutex as both partition scan I/O takes it, and head disk revalidation takes it to check for resize (also triggered from scan_work on a different path). See trace [1]. The mpath disk revalidation was originally added to detect online disk size change, but this is no longer needed since commit cb224c3af4df ("nvme: Convert to use set_capacity_revalidate_and_notify") which already updates resize info without unnecessarily revalidating the disk (the mpath disk doesn't even implement .revalidate_disk fop). [1]: -- kernel: INFO: task kworker/u65:9:494 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:9 D 0 494 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: revalidate_disk+0x63/0xa0 kernel: __nvme_revalidate_disk+0xfe/0x110 [nvme_core] kernel: nvme_revalidate_disk+0xa4/0x160 [nvme_core] kernel: ? evict+0x14c/0x1b0 kernel: revalidate_disk+0x2b/0xa0 kernel: nvme_validate_ns+0x49/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: ? __nvme_submit_sync_cmd+0xbe/0x1e0 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 ... kernel: INFO: task kworker/u65:1:2630 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:1 D 0 2630 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: ? __switch_to_asm+0x34/0x70 kernel: ? file_fdatawait_range+0x30/0x30 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: ? kmem_cache_alloc_trace+0x19c/0x230 kernel: efi_partition+0x1e6/0x708 kernel: ? vsnprintf+0x39e/0x4e0 kernel: ? snprintf+0x49/0x60 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: ? nvme_update_ns_ana_state+0x60/0x60 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 -- Fixes: fab7772bfbcf ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns") Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-24nvme-rdma: assign completion vector correctlyMax Gurtovoy
The completion vector index that is given during CQ creation can't exceed the number of support vectors by the underlying RDMA device. This violation currently can accure, for example, in case one will try to connect with N regular read/write queues and M poll queues and the sum of N + M > num_supported_vectors. This will lead to failure in establish a connection to remote target. Instead, in that case, share a completion vector between queues. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-24nvme-loop: initialize tagset numa value to the value of the ctrlMax Gurtovoy
Both admin's and drive's tagsets should be set according the numa node of the controller. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-24nvme-tcp: initialize tagset numa value to the value of the ctrlMax Gurtovoy
Both admin's and drive's tagsets should be set according the numa node of the controller. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-24nvme-pci: initialize tagset numa value to the value of the ctrlMax Gurtovoy
Both admin's and drive's tagsets should be set according the numa node of the controller. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-24nvme-pci: override the value of the controller's numa nodeMax Gurtovoy
Set the node value according to the PCI device numa node. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-24nvme: set initial value for controller's numa nodeMax Gurtovoy
Initialize the node to NUMA_NO_NODE value. Transports that are aware of numa node affinity can override it (e.g. RDMA transport set the affinity according to the RDMA HCA). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-24nvme-rdma: fix a missing completion with remove invalidationChristoph Hellwig
Revert and incorret transformation that caused requests using remote invalidation to never complete. Fixes: 421147be863b ("nvme-rdma: factor out a nvme_rdma_end_request helper") Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24nvme: use blk_mq_complete_request_remote to avoid an indirect function callChristoph Hellwig
Use the new blk_mq_complete_request_remote helper to avoid an indirect function call in the completion fast path. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24nvme-rdma: factor out a nvme_rdma_end_request helperChristoph Hellwig
Factor a small sniplet of duplicated code into a new helper in preparation for making this sniplet a little bit less trivial. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: move failure injection out of blk_mq_complete_requestChristoph Hellwig
Move the call to blk_should_fake_timeout out of blk_mq_complete_request and into the drivers, skipping call sites that are obvious error handlers, and remove the now superflous blk_mq_force_complete_rq helper. This ensures we don't keep injecting errors into completions that just terminate the Linux request after the hardware has been reset or the command has been aborted. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-11Merge tag 'block-5.8-2020-06-11' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Some followup fixes for this merge window. In particular: - Seqcount write missing preemption disable for stats (Ahmed) - blktrace fixes (Chaitanya) - Redundant initializations (Colin) - Various small NVMe fixes (Chaitanya, Christoph, Daniel, Max, Niklas, Rikard) - loop flag bug regression fix (Martijn) - blk-mq tagging fixes (Christoph, Ming)" * tag 'block-5.8-2020-06-11' of git://git.kernel.dk/linux-block: umem: remove redundant initialization of variable ret pktcdvd: remove redundant initialization of variable ret nvmet: fail outstanding host posted AEN req nvme-pci: use simple suspend when a HMB is enabled nvme-fc: don't call nvme_cleanup_cmd() for AENs nvmet-tcp: constify nvmet_tcp_ops nvme-tcp: constify nvme_tcp_mq_ops and nvme_tcp_admin_mq_ops nvme: do not call del_gendisk() on a disk that was never added blk-mq: fix blk_mq_all_tag_iter blk-mq: split out a __blk_mq_get_driver_tag helper blktrace: fix endianness for blk_log_remap() blktrace: fix endianness in get_pdu_int() blktrace: use errno instead of bi_status block: nr_sects_write(): Disable preemption on seqcount write block: remove the error argument to the block_bio_complete tracepoint loop: Fix wrong masking of status flags block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failed
2020-06-11nvmet: fail outstanding host posted AEN reqChaitanya Kulkarni
In function nvmet_async_event_process() we only process AENs iff there is an open slot on the ctrl->async_event_cmds[] && aen event list posted by the target is not empty. This keeps host posted AEN outstanding if target generated AEN list is empty. We do cleanup the target generated entries from the aen list in nvmet_ctrl_free()-> nvmet_async_events_free() but we don't process AEN posted by the host. This leads to following problem :- When processing admin sq at the time of nvmet_sq_destroy() holds an extra percpu reference(atomic value = 1), so in the following code path after switching to atomic rcu, release function (nvmet_sq_free()) is not getting called which blocks the sq->free_done in nvmet_sq_destroy() :- nvmet_sq_destroy() percpu_ref_kill_and_confirm() - __percpu_ref_switch_mode() -- __percpu_ref_switch_to_atomic() --- call_rcu() -> percpu_ref_switch_to_atomic_rcu() ---- /* calls switch callback */ - percpu_ref_put() -- percpu_ref_put_many(ref, 1) --- else if (unlikely(atomic_long_sub_and_test(nr, &ref->count))) ---- ref->release(ref); <---- Not called. This results in indefinite hang:- void nvmet_sq_destroy(struct nvmet_sq *sq) ... if (ctrl && ctrl->sqs && ctrl->sqs[0] == sq) { nvmet_async_events_process(ctrl, status); percpu_ref_put(&sq->ref); } percpu_ref_kill_and_confirm(&sq->ref, nvmet_confirm_sq); wait_for_completion(&sq->confirm_done); wait_for_completion(&sq->free_done); <-- Hang here Which breaks the further disconnect sequence. This problem seems to be introduced after commit 64f5e9cdd711b ("nvmet: fix memory leak when removing namespaces and controllers concurrently"). This patch processes ctrl->async_event_cmds[] in the admin sq destroy() context irrespetive of aen_list. Also we get rid of the controller's aen_list processing in the nvmet_sq_destroy() context and just ignore ctrl->aen_list. This results in nvmet_async_events_process() being called from workqueue context so we adjust the code accordingly. Fixes: 64f5e9cdd711 ("nvmet: fix memory leak when removing namespaces and controllers concurrently ") Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-11nvme-pci: use simple suspend when a HMB is enabledChristoph Hellwig
While the NVMe specification allows the device to access the host memory buffer in host DRAM from all power states, hosts will fail access to DRAM during S3 and similar power states. Fixes: d916b1be94b6 ("nvme-pci: use host managed power state for suspend") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-14 08:31:07 +0000