summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)Author
2021-12-02phy: lan966x: Extend lan966x to support multiple phy interfaces.Horatiu Vultur
Currently the driver is supporting only the interfaces QSGMII, SGMII, RGMII and GMII. This patch extend the supported interfaces with 1000BASE-X and 2500BASE-X. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20211130101015.164916-1-horatiu.vultur@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-02phy: intel: Remove redundant dev_err call in thunderbay_emmc_phy_probe()Zou Wei
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1637822289-24534-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-26phy: stm32: adopt dev_err_probe for regulatorsFabrice Gasnier
Change stm32-usbphyc driver to use dev_err_probe(), to benefit of devices_deferred debugfs in case of probe deferral. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/1635172265-26219-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-25phy: bcm-ns-usb2: improve printing ref clk errorsRafał Miłecki
Improve message & use dev_err_probe() helper which prints actual error (helpful for debugging) and deals with -EPROBE_DEFER. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211123221521.25323-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: marvell: phy-mvebu-cp110-comphy: add support for 5gbase-rMarek Behún
Add support for PHY_INTERFACE_MODE_5GBASER mode within the Marvell CP110 common PHY driver. This is currently only supported via SMC calls to TF-A. Legacy support may be added later, if needed. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23phy: intel: Add Thunder Bay eMMC PHY supportRashmi A
Add support of eMMC PHY for Intel Thunder Bay SoC, uses the Arasan eMMC phy Signed-off-by: Rashmi A <rashmi.a@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20211027115516.4475-5-rashmi.a@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: Add lan966x ethernet serdes PHY driverHoratiu Vultur
Add the Microchip lan966x ethernet serdes PHY driver for interfaces available in the lan966x SoC. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20211116100818.1615762-4-horatiu.vultur@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: phy-can-transceiver: Make devm_gpiod_get optionalAswath Govindraju
In some cases the standby/enable gpio can be pulled low/high and would not be connected to a gpio. The current driver implementation will return an error in these cases. Therefore, make devm_gpiod_get optional. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20211102112120.23637-1-a-govindraju@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: cadence-torrent: use swap() to make code cleanerYang Guang
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Link: https://lore.kernel.org/r/20211104065233.1833499-1-yang.guang5@zte.com.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: uniphier-ahci: Add support for Pro4 SoCKunihiko Hayashi
Add support for PHY interface built into ahci controller implemented in UniPhier Pro4 SoC. Pro4 SoC distinguishes it from other SoCs as "legacy" SoC, which has GIO clock line. And Pro4 AHCI-PHY needs to control additional reset lines ("pm", "tx", and "rx"). Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1635503947-18250-9-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: uniphier-pcie: Add dual-phy support for NX1 SoCKunihiko Hayashi
NX1 SoC supports 2 lanes and has dual-phy. Should set appropriate configuration values to both PHY registers. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1635503947-18250-7-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: uniphier-pcie: Set VCOPLL clamp mode in PHY registerKunihiko Hayashi
Set VCOPLL clamp mode to mode 0 to avoid hardware unstable issue. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1635503947-18250-6-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: uniphier-pcie: Add compatible string and SoC-dependent data for NX1 SoCKunihiko Hayashi
Add basic support for UniPhier NX1 SoC. This includes a compatible string, SoC-dependent data, and a function that set to 2-lane mode. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1635503947-18250-5-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: uniphier-usb3: Add compatible string for NX1 SoCKunihiko Hayashi
Add basic support for UniPhier NX1 SoC. This includes a compatible string and the same SoC-dependent data as LD20/PXs3 SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1635503947-18250-3-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: amlogic: Add a new driver for the HDMI TX PHY on Meson8/8b/8m2Martin Blumenstingl
Amlogic Meson8/8b/8m2 have a built-in HDMI PHY in the HHI register region. Unfortunately only few register bits are documented. For HHI_HDMI_PHY_CNTL0 the magic numbers are taken from the 3.10 vendor kernel. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211020195107.1564533-3-martin.blumenstingl@googlemail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: HiSilicon: Fix copy and paste bug in error handlingDan Carpenter
This should check ">pmctrl" instead of "->sysctrl". This bug could potentially lead to a crash if we dereference the error pointer. Fixes: 73075011ffff ("phy: HiSilicon: Add driver for Kirin 970 PCIe PHY") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20211117074843.GE5237@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: qcom: Introduce new eDP PHY driverBjorn Andersson
Many recent Qualcomm platforms comes with native DP and eDP support. This consists of a controller in the MDSS and a QMP-like PHY. While similar to the well known QMP block, the eDP PHY only has TX lanes and the programming sequences are slightly different. Rather than continuing the trend of parameterize the QMP driver to pieces, this introduces the support as a new driver. The registration of link and pixel clocks are borrowed from the QMP driver. The non-DP link frequencies are omitted for now. The eDP PHY is very similar to the dedicated (non-USB) DP PHY, but only the prior is supported for now. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20211103234410.1352424-2-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: ti: omap-usb2: Fix the kernel-doc styleVinod Koul
The documentation uses incorrect style, so fix that. drivers/phy/ti/phy-omap-usb2.c:102: warning: Function parameter or member 'comparator' not described in 'omap_usb2_set_comparator' While at it, use a single line for function description Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Liam Beguin <liambeguin@gmail.com> Link: https://lore.kernel.org/r/20211120061531.410771-2-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: qualcomm: ipq806x-usb: Fix kernel-doc styleVinod Koul
The functions are documented but there were style issues, so fix the style and add missing description for phy_dwc3 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:130: drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:174: drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:212: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211120061531.410771-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: bcm-ns-usb2: support updated DT binding with PHY reg spaceRafał Miłecki
Updated DT binding maps just a PHY's register space instead of the whole DMU block. Accessing a common CRU reg is handled using syscon & regmap. The old binding has been deprecated and remains supported as a fallback method. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20211026093716.5567-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-20phy: ti: tusb1210: Fix the kernel-doc warnVinod Koul
The comment is not kernel-doc one and starts with /**, so fix that. drivers/phy/ti/phy-tusb1210.c:16: warning: expecting prototype for tusb1210.c(). Prototype was for TUSB1210_VENDOR_SPECIFIC2() instead Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Liam Beguin <liambeguin@gmail.com> Link: https://lore.kernel.org/r/20211116103951.34482-6-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-20phy: qualcomm: usb-hsic: Fix the kernel-doc warnVinod Koul
The comment is not kernel-doc one and starts with /**, so fix that. drivers/phy/qualcomm/phy-qcom-usb-hsic.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211116103951.34482-4-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-20phy: qualcomm: qmp: Add missing struct documentationVinod Koul
dp-* members were added to qmp_phy_combo_cfg but documentation was missed, so add that. drivers/phy/qualcomm/phy-qcom-qmp.c:2995: warning: Function parameter or member 'dp_aux_cfg' not described in 'qmp_phy' drivers/phy/qualcomm/phy-qcom-qmp.c:2995: warning: Function parameter or member 'dp_opts' not described in 'qmp_phy' drivers/phy/qualcomm/phy-qcom-qmp.c:2995: warning: Function parameter or member 'dp_clks' not described in 'qmp_phy' Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211116103951.34482-3-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-20phy: mvebu-cp110-utmi: Fix kernel-doc warnsVinod Koul
Fix the format and add description for ops to fix the below warnings: drivers/phy/marvell/phy-mvebu-cp110-utmi.c:94: warning: Function parameter or member 'syscon' not described in 'mvebu_cp110_utmi' drivers/phy/marvell/phy-mvebu-cp110-utmi.c:94: warning: Function parameter or member 'ops' not described in 'mvebu_cp110_utmi' Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20211116103951.34482-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-16phy: ti: report 2 non-kernel-doc commentsRandy Dunlap
Do not use "/**" to begin a non-kernel-doc comment. Fixes these build warnings: drivers/phy/ti/phy-am654-serdes.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * PCIe SERDES driver for AM654x SoC drivers/phy/ti/phy-j721e-wiz.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Wrapper driver for SERDES used in J721E Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20211115030559.13994-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-16phy: stm32: fix st,slow-hs-slew-rate with st,decrease-hs-slew-rateAmelie Delaunay
st,decrease-hs-slew-rate is described in phy-stm32-usbphyc.yaml. Then fix the property name in driver. Fixes: 2f5e9f815a2f ("phy: stm32: add phy tuning support") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211026154817.198937-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-04Merge tag 'char-misc-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char and misc and other tiny driver subsystem updates for 5.16-rc1. Loads of things in here, all of which have been in linux-next for a while with no reported problems (except for one called out below.) Included are: - habanana labs driver updates, including dma_buf usage, reviewed and acked by the dma_buf maintainers - iio driver update (going through this tree not staging as they really do not belong going through that tree anymore) - counter driver updates - hwmon driver updates that the counter drivers needed, acked by the hwmon maintainer - xillybus driver updates - binder driver updates - extcon driver updates - dma_buf module namespaces added (will cause a build error in arm64 for allmodconfig, but that change is on its way through the drm tree) - lkdtm driver updates - pvpanic driver updates - phy driver updates - virt acrn and nitr_enclaves driver updates - smaller char and misc driver updates" * tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits) comedi: dt9812: fix DMA buffers on stack comedi: ni_usb6501: fix NULL-deref in command paths arm64: errata: Enable TRBE workaround for write to out-of-range address arm64: errata: Enable workaround for TRBE overwrite in FILL mode coresight: trbe: Work around write to out of range coresight: trbe: Make sure we have enough space coresight: trbe: Add a helper to determine the minimum buffer size coresight: trbe: Workaround TRBE errata overwrite in FILL mode coresight: trbe: Add infrastructure for Errata handling coresight: trbe: Allow driver to choose a different alignment coresight: trbe: Decouple buffer base from the hardware base coresight: trbe: Add a helper to pad a given buffer area coresight: trbe: Add a helper to calculate the trace generated coresight: trbe: Defer the probe on offline CPUs coresight: trbe: Fix incorrect access of the sink specific data coresight: etm4x: Add ETM PID for Kryo-5XX coresight: trbe: Prohibit trace before disabling TRBE coresight: trbe: End the AUX handle on truncation coresight: trbe: Do not truncate buffer on IRQ coresight: trbe: Fix handling of spurious interrupts ...
2021-10-26phy: Sparx5 Eth SerDes: Fix return value check in sparx5_serdes_probe()Yang Yingliang
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 2ff8a1eeb5aa ("phy: Add Sparx5 ethernet serdes PHY driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210909072149.2934047-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: qcom-snps: Correct the FSEL_MASKSandeep Maheswaram
The FSEL_MASK which selects the refclock is defined incorrectly. It should be [4:6] not [5:7]. Due to this incorrect definition, the BIT(7) in USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 is reset which keeps PHY analog blocks ON during suspend. Fix this issue by correctly defining the FSEL_MASK. Fixes: 51e8114f80d0 ("phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs") Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> Link: https://lore.kernel.org/r/1635135575-5668-1-git-send-email-quic_c_sanm@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: hisilicon: Add of_node_put() in phy-hisi-inno-usb2Wan Jiabing
Fix following coccicheck warning: ./drivers/phy/hisilicon/phy-hisi-inno-usb2.c:138:1-23: WARNING: Function for_each_child_of_node should have of_node_put() before break Early exits from for_each_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20211015080154.16016-1-wanjiabing@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: qcom-qmp: another fix for the sc8180x PCIe definitionDmitry Baryshkov
Commit f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support") added SC8180X PCIe tables, but used sm8250_qmp_pcie_serdes_tbl as a serdes table because of the copy paste error. Commit bfccd9a71a08 ("phy: qcom-qmp: Fix sc8180x PCIe definition") corrected part of this mistake by pointing serdes_tbl to sc8180x_qmp_pcie_serdes_tbl, however the serdes_tbl_num field was not updated to use sc8180x table. So let's now fix the serdes_tbl_num field too. Fixes: bfccd9a71a08 ("phy: qcom-qmp: Fix sc8180x PCIe definition") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020155604.1374530-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: cadence-torrent: Add support to output received reference clockSwapnil Jakhade
Add support to output received reference clock. Model the received reference clock as an alternate parent of reference clock driver clock. When received refclk is selected to output on cmn_refclk_p/m, this is the internal reference clock driven on the pma_cmn_refclk_int. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210922123735.21927-5-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: cadence-torrent: Model reference clock driver as a clock to enable ↵Swapnil Jakhade
derived refclk When reference clock driver is enabled, either derived or received refclk is output on cmn_refclk_p/m. Update the reference clock driver implementation by modelling reference clock driver as a "clock" with derived reference clock set as its default parent. The support for received reference clock will be added in a separate patch. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210922123735.21927-4-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: cadence-torrent: Migrate to clk_hw based registration and OF APIsSwapnil Jakhade
Use clk_hw based provider APIs to register clks to remove the usage of deprecated APIs. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210922123735.21927-2-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: ti: gmii-sel: check of_get_address() for failureDan Carpenter
Smatch complains that if of_get_address() returns NULL, then "size" isn't initialized. Also it would lead to an Oops. Fixes: 7f78322cdd67 ("phy: ti: gmii-sel: retrieve ports number and base offset from dt") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20210914110038.GB11657@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: stm32: add phy tuning supportAmelie Delaunay
It can be necessary to adjust the phys settings to compensate parasitics. This patch adds support of new optional properties to configure the tune interface of the phys of stm32-usbphyc. Properties are optional, that's why each property is skipped if not found (-EINVAL). Phy tuning is restored on resume because if deep low power state is achieved, phy tuning configuration is reset. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211015161427.220784-4-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: stm32: restore utmi switch on resumeAmelie Delaunay
UTMI switch value can be lost during suspend/resume, depending on the power state reached. This patch adds resume function to usbphyc, to reconfigure utmi switch after suspend. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211015161427.220784-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: qcom-qusb2: Fix a memory leak on probeVladimir Zapolskiy
On success nvmem_cell_read() returns a pointer to a dynamically allocated buffer, and therefore it shall be freed after usage. The issue is reported by kmemleak: # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff3b3803e4b280 (size 128): comm "kworker/u16:1", pid 107, jiffies 4294892861 (age 94.120s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007739afdc>] __kmalloc+0x27c/0x41c [<0000000071c0fbf8>] nvmem_cell_read+0x40/0xe0 [<00000000e803ef1f>] qusb2_phy_init+0x258/0x5bc [<00000000fc81fcfa>] phy_init+0x70/0x110 [<00000000e3d48a57>] dwc3_core_soft_reset+0x4c/0x234 [<0000000027d1dbd4>] dwc3_core_init+0x68/0x990 [<000000001965faf9>] dwc3_probe+0x4f4/0x730 [<000000002f7617ca>] platform_probe+0x74/0xf0 [<00000000a2576cac>] really_probe+0xc4/0x470 [<00000000bc77f2c5>] __driver_probe_device+0x11c/0x190 [<00000000130db71f>] driver_probe_device+0x48/0x110 [<0000000019f36c2b>] __device_attach_driver+0xa4/0x140 [<00000000e5812ff7>] bus_for_each_drv+0x84/0xe0 [<00000000f4bac574>] __device_attach+0xe4/0x1c0 [<00000000d3beb631>] device_initial_probe+0x20/0x30 [<000000008019b9db>] bus_probe_device+0xa4/0xb0 Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210922233548.2150244-1-vladimir.zapolskiy@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: qcom-qmp: Add QCM2290 USB3 PHY supportShawn Guo
Enable QCM2290 USB3 PHY support by adding the qmp_phy_cfg data which are taken from downstream kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210927064829.5752-3-shawn.guo@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-24net: Convert more users of mdiobus_* to mdiodev_*Sean Anderson
This converts users of mdiobus to mdiodev using the following semantic patch: @@ identifier mdiodev; expression regnum; @@ - mdiobus_read(mdiodev->bus, mdiodev->addr, regnum) + mdiodev_read(mdiodev, regnum) @@ identifier mdiodev; expression regnum, val; @@ - mdiobus_write(mdiodev->bus, mdiodev->addr, regnum, val) + mdiodev_write(mdiodev, regnum, val) Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05phy: qcom-qusb2: Add missing vdd supplyShawn Guo
Per downstream kernel, beside vdda-pll and vdda-phy-dpdm, vdd is also a required supply for QUSB2 PHY digital circuit operation. The driver works right now likely because firmware already sets it up. Add it for correctness and completeness. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210928022002.26286-3-shawn.guo@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01phy: rockchip-inno-usb2: Make use of the helper function ↵Cai Huoqing
devm_add_action_or_reset() The helper function devm_add_action_or_reset() will internally call devm_add_action(), and gif devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210922130024.745-1-caihuoqing@baidu.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01phy: qcom-qmp: Make use of the helper function devm_add_action_or_reset()Cai Huoqing
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and gif devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210922130017.692-1-caihuoqing@baidu.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01phy: qcom-qusb2: Add compatible for QCM2290Shawn Guo
Add compatible for QCM2290 QUSB2 device which reuses SM6115 configuration. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210919031110.25064-3-shawn.guo@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01phy: broadcom: Kconfig: Add configuration menu for Broadcom phy driversCai Huoqing
Adding a configuration menu to hold many Broadcom phy drivers helps to make the menu display more concise. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210923025013.189-1-caihuoqing@baidu.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01phy: HiSilicon: Add driver for Kirin 970 PCIe PHYMauro Carvalho Chehab
The Kirin 970 PHY is somewhat similar to the Kirin 960, but it does a lot more. Add the needed bits for PCIe to start working on HiKey 970 boards. Co-developed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/b7a4ff41b57d861b003f1a00cae81f3d226fbe18.1632814194.git.mchehab+huawei@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01phy: samsung: unify naming and describe driver in KConfigKrzysztof Kozlowski
We use everywhere "Samsung" and "Exynos", not the uppercase versions. Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210924132658.109814-1-krzysztof.kozlowski@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-09-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f. Subsystems affected by this patch series: mm (memory-hotplug, rmap, ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan), alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib, checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig, selftests, ipc, and scripts" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) scripts: check_extable: fix typo in user error message mm/workingset: correct kernel-doc notations ipc: replace costly bailout check in sysvipc_find_ipc() selftests/memfd: remove unused variable Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH configs: remove the obsolete CONFIG_INPUT_POLLDEV prctl: allow to setup brk for et_dyn executables pid: cleanup the stale comment mentioning pidmap_init(). kernel/fork.c: unexport get_{mm,task}_exe_file coredump: fix memleak in dump_vma_snapshot() fs/coredump.c: log if a core dump is aborted due to changed file permissions nilfs2: use refcount_dec_and_lock() to fix potential UAF nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group nilfs2: fix NULL pointer in nilfs_##name##_attr_release nilfs2: fix memory leak in nilfs_sysfs_create_device_group trap: cleanup trap_init() init: move usermodehelper_enable() to populate_rootfs() ...
2021-09-08phy/drivers/stm32: use HZ macrosDaniel Lezcano
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-11-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Christian Eggers <ceggers@arri.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03Merge tag 'mips_5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - converted Pistachio platform to use MIPS generic kernel - fixes and cleanups * tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits) MIPS: Malta: fix alignment of the devicetree buffer MIPS: ingenic: Unconditionally enable clock of CPU #0 MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports MIPS: mscc: ocelot: disable all switch ports by default MAINTAINERS: adjust PISTACHIO SOC SUPPORT after its retirement MIPS: Return true/false (not 1/0) from bool functions MIPS: generic: Return true/false (not 1/0) from bool functions MIPS: Make a alias for pistachio_defconfig MIPS: Retire MACH_PISTACHIO MIPS: config: generic: Add config for Marduk board pinctrl: pistachio: Make it as an option phy: pistachio-usb: Depend on MIPS || COMPILE_TEST clocksource/drivers/pistachio: Make it selectable for MIPS clk: pistachio: Make it selectable for generic MIPS kernel MIPS: DTS: Pistachio add missing cpc and cdmm MIPS: generic: Allow generating FIT image for Marduk board MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positive MIPS: loongson2ef: don't build serial.o unconditionally MIPS: Replace deprecated CPU-hotplug functions. MIPS: Alchemy: Fix spelling contraction "cant" -> "can't" ...
generated by cgit (git 2.34.1) at 2025-09-14 12:00:02 +0000