summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)Author
2021-06-21phy/rockchip: add Innosilicon-based CSI dphyHeiko Stuebner
The CSI dphy found for example on the rk3326/px30 and rk3368 is based on an IP design from Innosilicon. Add a driver for it. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210610212935.3520341-3-heiko@sntech.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21phy: rockchip: remove redundant initialization of pointer cfgColin Ian King
The pointer cfg is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210609113901.185230-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14Merge tag 'for-5.14-usb' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into usb-next Thierry writes: usb: tegra: Changes for v5.14-rc1 Implements proper suspend/resume for the XUSB controller found on recent Tegra chips. * tag 'for-5.14-usb' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: usb: xhci: tegra: Enable ELPG for runtime/system PM usb: xhci: tegra: Unlink power domain devices phy: tegra: xusb: Add wake/sleepwalk for Tegra186 phy: tegra: xusb: Tegra210 host mode VBUS control phy: tegra: xusb: Add wake/sleepwalk for Tegra210 phy: tegra: xusb: Add sleepwalk and suspend/resume phy: tegra: xusb: Add Tegra210 lane_iddq operation phy: tegra: xusb: Rearrange UPHY init on Tegra210 phy: tegra: xusb: Move usb3 port init for Tegra210
2021-06-14phy: phy-can-transceiver: Add support for generic CAN transceiver driverAswath Govindraju
The driver adds support for generic CAN transceivers. Currently the modes supported by this driver are standby and normal modes for TI TCAN1042 and TCAN1043 CAN transceivers. The transceiver is modelled as a phy with pins controlled by gpios, to put the transceiver in various device functional modes. It also gets the phy attribute max_link_rate for the usage of CAN drivers. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20210510051006.11393-4-a-govindraju@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14phy: phy-mtk-hdmi: Remove redundant dev_err call in mtk_hdmi_phy_probe()He Ying
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: He Ying <heying24@huawei.com> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210408115530.15673-1-heying24@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14phy: phy-mtk-mipi-dsi: Remove redundant dev_err call in mtk_mipi_tx_probe()He Ying
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: He Ying <heying24@huawei.com> Link: https://lore.kernel.org/r/20210408114850.14422-1-heying24@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14phy: phy-mmp3-hsic: Remove redundant dev_err call in mmp3_hsic_phy_probe()He Ying
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: He Ying <heying24@huawei.com> Link: https://lore.kernel.org/r/20210408090806.247325-1-heying24@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe()He Ying
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: He Ying <heying24@huawei.com> Link: https://lore.kernel.org/r/20210408090808.247368-1-heying24@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03phy: tegra: xusb: Add wake/sleepwalk for Tegra186JC Kuo
This commit implements Tegra186/Tegra194 XUSB PADCTL/AO wake and sleepwalk operations. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Tegra210 host mode VBUS controlJC Kuo
To support XUSB host controller ELPG, this commit moves VBUS control .phy_power_on()/.phy_power_off() to .phy_init()/.phy_exit(). When XUSB host controller enters ELPG, host driver invokes .phy_power_off(), VBUS should remain ON so that USB devices will not disconnect. VBUS can be turned OFF when host driver invokes .phy_exit() which indicates disabling a USB port. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Add wake/sleepwalk for Tegra210JC Kuo
This commit implements Tegra210 XUSB PADCTL wake and sleepwalk routines. Sleepwalk logic is in PMC (always-on) hardware block. PMC driver provides managed access to the sleepwalk registers via regmap framework. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Add sleepwalk and suspend/resumeJC Kuo
This commit adds sleepwalk/wake and suspend/resume interfaces to Tegra XUSB PHY driver. Tegra XUSB host controller driver makes use of sleepwalk functions to enable/disable sleepwalk circuit which is in always-on partition and can respond to USB resume signals when controller is not powered. Sleepwalk can be enabled/disabled for any USB UPHY individually. - tegra_xusb_padctl_enable_phy_sleepwalk() - tegra_xusb_padctl_disable_phy_sleepwalk() Tegra XUSB host controller driver makes use of wake functions to enable/disable/query wake circuit which is in always-on partition can wake system up when USB resume happens. Wake circuit can be enabled/disabled for any USB PHY individually. - tegra_xusb_padctl_enable_phy_wake() - tegra_xusb_padctl_disable_phy_wake() - tegra_xusb_padctl_remote_wake_detected() This commit also adds two system suspend stubs that can be used to save and restore XUSB PADCTL context during system suspend and resume. - tegra_xusb_padctl_suspend_noirq() - tegra_xusb_padctl_resume_noirq() Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Add Tegra210 lane_iddq operationJC Kuo
As per Tegra210 TRM, before changing lane assignments, driver should keep lanes in IDDQ and sleep state; after changing lane assignments, driver should bring lanes out of IDDQ. This commit implements the required operations. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Rearrange UPHY init on Tegra210JC Kuo
This commit is a preparation for enabling XUSB SC7 support. It rearranges Tegra210 XUSB PADCTL UPHY initialization sequence, for the following reasons: 1. PLLE hardware power sequencer has to be enabled only after both PEX UPHY PLL and SATA UPHY PLL are initialized. tegra210_uphy_init() -> tegra210_pex_uphy_enable() -> tegra210_sata_uphy_enable() -> tegra210_plle_hw_sequence_start() -> tegra210_aux_mux_lp0_clamp_disable() 2. At cold boot and SC7 exit, the following bits must be cleared after PEX/SATA lanes are out of IDDQ (IDDQ_DISABLE=1). a. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN, b. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY c. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN tegra210_pex_uphy_enable() and tegra210_sata_uphy_enable() are in charge of bringing lanes out of IDDQ, and then AUX_MUX_LP0_* bits will be cleared by tegra210_aux_mux_lp0_clamp_disable(). 3. Once UPHY PLL hardware power sequencer is enabled, do not assert reset to PEX/SATA PLLs, otherwise UPHY PLL operation will be broken. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Move usb3 port init for Tegra210JC Kuo
The programming sequence in tegra210_usb3_port_enable() is required for both cold boot and SC7 exit, and must be performed only after PEX/SATA UPHY is initialized. Therefore, this commit moves the programming sequence to tegra210_usb3_phy_power_on(). PCIE/SATA phy .power_on() stub will invoke tegra210_usb3_phy_power_on() if the lane is assigned for XUSB super-speed. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()Yang Yingliang
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210603051014.2674744-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variableSergio Paracuellos
The of_device_id is included unconditionally by of.h header and used in the driver as well. Remove of_match_ptr to fix W=1 compile test warning with !CONFIG_OF: drivers/phy/ralink/phy-mt7621-pci.c:341:34: warning: unused variable 'mt7621_pci_phy_ids' [-Wunused-const-variable] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210603043219.32646-1-sergio.paracuellos@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: ti: Fix an error code in wiz_probe()Yang Li
When the code execute this if statement, the value of ret is 0. However, we can see from the dev_err() log that the value of ret should be -EINVAL. Clean up smatch warning: drivers/phy/ti/phy-j721e-wiz.c:1216 wiz_probe() warn: missing error code 'ret' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: c9f9eba06629 ("phy: ti: j721e-wiz: Manage typec-gpio-dir") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1621939832-65535-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-twl4030-usb: use DEVICE_ATTR_RO macroYueHaibing
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210520135132.37628-1-yuehaibing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-rockchip-inno-usb2: add support for RK3308 USB phyTobias Schramm
The RK3308 SoC uses a slightly different USB phy than other Rockchip parts. This commit adds support for that phy. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Link: https://lore.kernel.org/r/20210514150044.2099298-3-t.schramm@manjaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: stm32: manage optional vbus regulator on phy_power_on/offAmelie Delaunay
This patch adds support for optional vbus regulator. It is managed on phy_power_on/off calls and may be needed for host mode. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210517120821.26466-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: qcom-qmp: remove redundant error of clock bulkChunfeng Yun
There is error log in clk_bulk_prepare/enable() Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1621229841-22984-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-xgene.c: Fix alignment of commentShubhankar Kuranagatti
A * has been added at the starting of new line The closing */ of multi line comment shifted to new line This is done to maintain code uniformity. Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210428165515.o47o5awzdxirxkqi@kewl-virtual-machine Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()Tiezhu Yang
Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix some resource leaks. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1621420659-15858-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()Wang Wensheng
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: a43f72ae136a ("phy: cadence: Sierra: Change MAX_LANES of Sierra to 16") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Link: https://lore.kernel.org/r/20210517015749.127799-1-wangwensheng4@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: qcom-qmp: Add support for SDX55 QMP PCIe PHYManivannan Sadhasivam
The PCIe PHY version used in SDX55 is v4.20 which has different register offsets compared to the v4.0x PHYs. So separate register defines are used for init sequence and PHY status. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210427065400.18958-4-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: qcom-qmp: Use phy_status field for the status bit offsetManivannan Sadhasivam
In preparation of the support for v4.20 PCIe PHY in SDX55, use a separate "phy_status" field for the status bit offset. This is needed because, the v4.20 PHY uses a different offset for the PHY Status. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210427065400.18958-3-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-14phy: phy-core-mipi-dphy.c: Correct reference versionSebastian Fricke
The rest of the code refers to version 1.2 of the MIPI D-PHY specification. But this comment refers to 2.1, while a sub comment of the function refers to 1.2 again. Replace 2.1 with 1.2. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Link: https://lore.kernel.org/r/20210421041740.8451-1-sebastian.fricke@posteo.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-14phy: Allow a NULL phy name for devm_phy_get()Rob Herring
For a single PHY, there's no reason to have a phy-names entry in DT. The DT specific get functions allow for this already, but devm_phy_get() WARNs in this case. Other subsystems also don't warn in their get functions. Let's drop the WARN for DT case in devm_phy_get(). Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210414135525.3535787-1-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-14phy: usb: Fix misuse of IS_ENABLEDChen Li
While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not for other symbols such as __BIG_ENDIAN that is provided directly by the compiler. Switch to use CONFIG_CPU_BIG_ENDIAN instead of __BIG_ENDIAN. Signed-off-by: Chen Li <chenli@uniontech.com> Reviewed-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: 94583a41047e ("phy: usb: Restructure in preparation for adding 7216 USB support") Link: https://lore.kernel.org/r/87czuggpra.wl-chenli@uniontech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-14phy: qcom-qmp: add QMP V2 PCIe PHY support for ipq60xxSelvam Sathappan Periakaruppan
Based on code from downstream Codeaurora tree. The ipq60xx has one gen3 PCIe port. Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/e24f2bedb8a7346018b58136bcb0a4004d8677a0.1620203062.git.baruch@tkos.co.il Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-14phy: ralink: phy-mt7621-pci: properly print pointer addressSergio Paracuellos
The way of printing the pointer address for the 'port_base' address got into compile warnings on some architectures [-Wpointer-to-int-cast]. Instead of use '%08x' and cast to an 'unsigned int' just make use of '%px' and avoid the cast. To avoid not really needed driver verbosity on normal behaviour change also from 'dev_info' to 'dev_dbg'. Fixes: d87da32372a0 ("phy: ralink: Add PHY driver for MT7621 PCIe PHY") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210508070930.5290-7-sergio.paracuellos@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-14phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'Sergio Paracuellos
Make dependent on PCI_MT7621 configuration option and mark this pci phy configuration as bool which has more sense. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210508070930.5290-6-sergio.paracuellos@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-14phy: ralink: Kconfig: enable COMPILE_TEST on mt7621-pci-phy driverSergio Paracuellos
After use the clock apis and avoid custom architecture code this driver can properly be enabled for COMPILE_TEST. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210508070930.5290-5-sergio.paracuellos@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-14phy: ralink: phy-mt7621-pci: use kernel clock APISSergio Paracuellos
MT7621 SoC clock driver has already mainlined in 'commit 48df7a26f470 ("clk: ralink: add clock driver for mt7621 SoC")' This allow us to properly use kernel clock apis to get the clock frequency needed for the phy configuration instead of use custom architecture code to do the same. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210508070930.5290-4-sergio.paracuellos@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-16phy: Revert "phy: ti: j721e-wiz: add missing of_node_put"Vinod Koul
This reverts commit 00f2e6f668b0 ("phy: ti: j721e-wiz: add missing of_node_put") as it erroneously adds the of_node_put() as incorrect place. Reported-by: Junlin Yang <yangjunlin@yulong.com> Link: https://lore.kernel.org/r/20210408062914.3813102-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-16phy: ti: j721e-wiz: Add missing include linux/slab.hShixin Liu
When compiling with CONFIG_PHY_J721E_WIZ, Hulk Robot reported: drivers/phy/ti/phy-j721e-wiz.c: In function ‘wiz_mux_clk_register’: drivers/phy/ti/phy-j721e-wiz.c:659:17: error: implicit declaration of function ‘kzalloc’; did you mean ‘vzalloc’? [-Werror=implicit-function-declaration] 659 | parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL); | ^~~~~~~ | vzalloc drivers/phy/ti/phy-j721e-wiz.c:659:15: warning: assignment to ‘const char **’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion] 659 | parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL); | ^ drivers/phy/ti/phy-j721e-wiz.c:697:2: error: implicit declaration of function ‘kfree’; did you mean ‘vfree’? [-Werror=implicit-function-declaration] 697 | kfree(parent_names); | ^~~~~ | vfre Fixes: 040cbe768731 ("phy: ti: j721e-wiz: Model the internal clocks without device tree input") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Shixin Liu <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20210408012829.432938-1-liushixin2@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-16phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()Yang Yingliang
This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210407092716.3270248-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-06time64.h: Consolidated PSEC_PER_SEC definitionAndy Shevchenko
We have currently three users of the PSEC_PER_SEC each of them defining it individually. Instead, move it to time64.h to be available for everyone. There is a new user coming with the same constant in use. It will also make its life easier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-06phy: fix resource_size.cocci warningskernel test robot
drivers/phy/microchip/sparx5_serdes.c:2440:54-57: ERROR: Missing resource_size with iores Use resource_size function on resource object instead of explicit computation. Generated by: scripts/coccinelle/api/resource_size.cocci Fixes: 2ff8a1eeb5aa ("phy: Add Sparx5 ethernet serdes PHY driver") CC: Steen Hegelund <steen.hegelund@microchip.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210318232844.GA65886@63b0c5462fda Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06phy: Sparx5 Eth SerDes: Use direct register operationsSteen Hegelund
Use direct register operations instead of a table of register information to lower the stack usage. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210329141309.612459-2-steen.hegelund@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06phy: hisilicon: Use the correct HiSilicon copyrightHao Fang
s/Hisilicon/HiSilicon/g. It should use capital S, according to the official website. Signed-off-by: Hao Fang <fanghao11@huawei.com> Link: https://lore.kernel.org/r/1617278537-26102-1-git-send-email-fanghao11@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMONRandy Dunlap
When USB and USB_COMMON are not enabled, phy-mvebu-cp110-utmi suffers a build error due to a missing interface that is provided by CONFIG_USB_COMMON, so make the driver depend on USB_COMMON. ld: drivers/phy/marvell/phy-mvebu-cp110-utmi.o: in function `mvebu_cp110_utmi_phy_probe': phy-mvebu-cp110-utmi.c:(.text+0x152): undefined reference to `of_usb_get_dr_mode_by_phy' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20210401210045.23525-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: qcom-qmp: add support for sm8250-usb3-dp phyDmitry Baryshkov
Add support for QMP V4 Combo USB3+DP PHY (for SM8250 platform). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210331151614.3810197-6-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: qcom-qmp: rename common registersDmitry Baryshkov
A plenty of DP PHY registers are common between V3 and V4. To simplify V4 code, rename all common registers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210331151614.3810197-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: qcom-qmp: move DP functions to callbacksDmitry Baryshkov
In preparation to adding support for V4 DP PHY move DP functions to callbacks at struct qmp_phy_cfg. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210331151614.3810197-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: ti: j721e-wiz: Configure 'p_standard_mode' only for DP/QSGMIIKishon Vijay Abraham I
Configure 'p_standard_mode' only for DP/QSGMII as for other modes it's not used as per the programming sequence. Add "continue" in the else to prevent random value from being written to p_standard_mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210331131417.15596-1-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: zynqmp: Handle the clock enable/disable properlyManish Narani
The current driver is not handling the clock enable/disable operations properly. The clocks need to be handled correctly by enabling or disabling at appropriate places. This patch adds code to handle the same. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1616588325-95602-1-git-send-email-manish.narani@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: microchip: PHY_SPARX5_SERDES should depend on ARCH_SPARX5Geert Uytterhoeven
The Microchip Sparx5 SerDes PHY is present only Microchip Sparx5 SoCs. Hence add a dependency on ARCH_SPARX5, to prevent asking the user about this driver when configuring a kernel without support for Sparx5 SoCs. Fixes: 2ff8a1eeb5aa8bb4 ("phy: Add Sparx5 ethernet serdes PHY driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210331081937.367408-1-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 16:59:24 +0000