summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)Author
2021-03-31phy: cadence-torrent: Add delay for PIPE clock to be stableKishon Vijay Abraham I
The Torrent spec specifies delay of 660.5us after phy_reset is asserted by the controller. To be on the safe side provide a delay of 5ms to 10ms in ->phy_on() callback where the SERDES is already configured in bootloader. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210330110138.24356-6-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence-torrent: Explicitly request exclusive reset controlKishon Vijay Abraham I
No functional change. Since the reset controls obtained in Torrent is exclusively used by the Torrent device, use exclusive reset control request API calls. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210330110138.24356-5-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence-torrent: Do not configure SERDES if it's already configuredKishon Vijay Abraham I
Do not configure torrent SERDES if it's already configured. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210330110138.24356-4-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence-torrent: Group reset APIs and clock APIsKishon Vijay Abraham I
No functional change intended. Group reset APIs and clock APIs in preparation for adding support to skip configuration if the SERDES is already configured by bootloader. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210330110138.24356-3-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: ti: j721e-wiz: Do not configure wiz if its already configuredFaiz Abbas
Serdes lanes might be shared between multiple cores in some usecases and its not possible to lock PLLs for both the lanes independently by the two cores. This requires a bootloader to configure both the lanes at early boot time. To handle this case, skip all configuration if any of the lanes has already been enabled. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210330110138.24356-2-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Enable pll_cmnlc and pll_cmnlc1 clocksKishon Vijay Abraham I
Get pll_cmnlc and pll_cmnlc1 optional clocks and enable them. This will enable REFRCV/1 in case the pll_cmnlc/1 takes input from REFRCV/1 respectively. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210319124128.13308-14-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as clocks (mux clocks)Kishon Vijay Abraham I
Sierra has two PLLs, PLL_CMNLC and PLL_CMNLC1 and each of these PLLs has two inputs, plllc_refclk (input from pll0_refclk) and refrcv (input from pll1_refclk). Model PLL_CMNLC and PLL_CMNLC1 as clocks so that it's possible to select one of these two inputs from device tree. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210319124128.13308-13-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Add missing clk_disable_unprepare() in .remove callbackKishon Vijay Abraham I
commit 44d30d622821 ("phy: cadence: Add driver for Sierra PHY") enabled the clock in probe and failed to disable in remove callback. Add missing clk_disable_unprepare() in cdns_sierra_phy_remove(). Fixes: 44d30d622821 ("phy: cadence: Add driver for Sierra PHY") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210319124128.13308-11-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Add array of input clocks in "struct cdns_sierra_phy"Kishon Vijay Abraham I
Instead of having separate structure members for each input clock, add an array for the input clocks within "struct cdns_sierra_phy". This is in preparation for adding more input clocks required for supporting additional clock combination. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210319124128.13308-10-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence-torrent: Use a common header file for Cadence SERDESKishon Vijay Abraham I
No functional change. In order to have a single header file for all Cadence SERDES move phy-cadence-torrent.h to phy-cadence.h. This is in preparation for adding Cadence Sierra SERDES specific macros. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210319124128.13308-9-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Explicitly request exclusive reset controlKishon Vijay Abraham I
No functional change. Since the reset controls obtained in Sierra is exclusively used by the Sierra device, use exclusive reset control request API calls. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20210319124128.13308-8-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Move all reset_control_get*() to a separate functionKishon Vijay Abraham I
No functional change. Group devm_reset_control_get() and devm_reset_control_get_optional() to a separate function. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20210319124128.13308-7-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Move all clk_get_*() to a separate functionKishon Vijay Abraham I
No functional change. Group all devm_clk_get_optional() to a separate function. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210319124128.13308-6-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: ti: j721e-wiz: Get PHY properties only for "phy" or "link" subnodeKishon Vijay Abraham I
"serdes" node (child node of WIZ) can have sub-nodes for representing links or it can have sub-nodes for representing the various clocks within the serdes. Instead of trying to read "reg" from every child node used for assigning "lane_phy_type", read only if the child node's name is "phy" or "link" subnode. Ideally all PHY dt nodes should have node name as "phy", however existing devicetree used "link" as subnode. So in order to maintain old DT compatibility get PHY properties for "phy" or "link" subnode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210319124128.13308-5-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Create PHY only for "phy" or "link" sub-nodesKishon Vijay Abraham I
Cadence Sierra PHY driver registers PHY using devm_phy_create() for all sub-nodes of Sierra device tree node. However Sierra device tree node can have sub-nodes for the various clocks in addtion to the PHY. Use devm_phy_create() only for nodes with name "phy" (or "link" for old device tree) which represent the actual PHY. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210319124128.13308-4-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: ti: j721e-wiz: Invoke wiz_init() before of_platform_device_create()Kishon Vijay Abraham I
Invoke wiz_init() before configuring anything else in Sierra/Torrent (invoked as part of of_platform_device_create()). wiz_init() resets the SERDES device and any configuration done in the probe() of Sierra/Torrent will be lost. In order to prevent SERDES configuration from getting reset, invoke wiz_init() immediately before invoking of_platform_device_create(). Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Cc: <stable@vger.kernel.org> # v5.10 Link: https://lore.kernel.org/r/20210319124128.13308-3-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Fix PHY power_on sequenceKishon Vijay Abraham I
Commit 44d30d622821d ("phy: cadence: Add driver for Sierra PHY") de-asserts PHY_RESET even before the configurations are loaded in phy_init(). However PHY_RESET should be de-asserted only after all the configurations has been initialized, instead of de-asserting in probe. Fix it here. Fixes: 44d30d622821d ("phy: cadence: Add driver for Sierra PHY") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20210319124128.13308-2-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: qcom-qmp: add hbr3_hbr2 voltage and premphasis swing tableKuogee Hsieh
Add hbr3_hbr2 voltage and premphasis swing table to support HBR3 link rate. Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1615914761-12300-1-git-send-email-khsieh@codeaurora.org Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy") Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ingenic: Fix a typo in ingenic_usb_phy_probe()Wei Yongjun
Fix the return value check typo which testing the wrong variable in ingenic_usb_phy_probe(). Fixes: 31de313dfdcf ("PHY: Ingenic: Add USB PHY driver using generic PHY framework.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210305034933.3240914-1-weiyongjun1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ralink: phy-mt7621-pci: fix return value check in mt7621_pci_phy_probe()Wei Yongjun
Fix the return value check which testing the wrong variable in mt7621_pci_phy_probe(). Fixes: d87da32372a0 ("phy: ralink: Add PHY driver for MT7621 PCIe PHY") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210305034931.3237558-1-weiyongjun1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionallyGeert Uytterhoeven
Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of ARMADA375_USBCLUSTER_PHY to MACH_ARMADA_375, and ask the user in case of compile-testing. Fixes: eee47538ec1f2619 ("phy: add support for USB cluster on the Armada 375 SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210208150252.424706-1-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: add missing call to of_node_put()Yang Li
In one of the error paths of the for_each_child_of_node() loop in of_property_read_u32, add missing call to of_node_put(). Fix the following coccicheck warning: ./drivers/phy/ti/phy-j721e-wiz.c:786:1-23: WARNING: Function "for_each_child_of_node" should have of_node_put() before return around line 795. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1614244674-66556-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ralink: phy-mt7621-pci: fix XTAL bitmaskSergio Paracuellos
When this was rewriten to get mainlined and start to use 'linux/bitfield.h' headers, XTAL_MASK was wrong. It must mask three bits but only two were used. Hence properly fix it to make things work. Fixes: d87da32372a0 ("phy: ralink: Add PHY driver for MT7621 PCIe PHY") Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210302105412.16221-1-sergio.paracuellos@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: cadence-torrent: Update PCIe + USB config for correct PLL1 clockSwapnil Jakhade
Update PCIe + USB register sequences for correct PLL1 clock configuration. Also, update sequences for other USB configurations with dependent changes. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/1614838096-32291-5-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: cadence-torrent: Update SGMII/QSGMII configuration specific to TIKishon Vijay Abraham I
Update SGMII/QSGMII configuration specific to TI. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1614838096-32291-4-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Add support for configuring QSGMIIKishon Vijay Abraham I
Configure MAC clock dividers required for QSGMII to be functional. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1614838096-32291-3-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: cadence-torrent: Update PCIe + QSGMII config for correct PLL1 clockSwapnil Jakhade
For PCIe + QSGMII configuration where QSGMII was using PLL1 and was expecting 10GHz clock, configuration was giving 8GHz clock. Update register sequences to get correct PLL1 configuration. Also, update single link PCIe and single link SGMII/QSGMII configurations with related changes. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/1614838096-32291-2-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: cadence-torrent: Add support to drive refclk outKishon Vijay Abraham I
cmn_refclk_<p/m> lines in Torrent SERDES is used for connecting external reference clock. cmn_refclk_<p/m> can also be configured to output the reference clock. Model this derived reference clock as a "clock" so that platforms like AM642 EVM can enable it. This is used by PCIe to use the same refclk both in local SERDES and remote device. Add support here to drive refclk out. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210310120840.16447-7-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m>Kishon Vijay Abraham I
cmn_refclk_<p/m> lines in Torrent SERDES is used for connecting external reference clock. cmn_refclk_<p/m> can also be configured to output the reference clock. In order to drive the refclk out from the SERDES (Cadence Torrent), PHY_EN_REFCLK should be set in SERDES_RST of WIZ. Model PHY_EN_REFCLK as a clock, so that platforms like AM642 EVM can enable it. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210310120840.16447-6-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Model the internal clocks without device tree inputKishon Vijay Abraham I
commit 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") modeled the internal clocks depending on the subnodes that are populated in device tree. However recent discussions in the mailing list [1] suggested to just add #clock cells in the parent DT node and model the clocks within the driver. Model the mux clocks without device tree input for AM64x SoC. Don't remove the earlier design since DT nodes for J7200 and J721e are already upstreamed. [1] -> http://lore.kernel.org/r/20210108025943.GA1790601@robh.at.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210310120840.16447-5-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Configure full rate divider for AM64Kishon Vijay Abraham I
The frequency of the txmclk between PCIe and SERDES has changed to 250MHz from 500MHz. Configure full rate divider for AM64 accordingly. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210310120840.16447-4-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanupKishon Vijay Abraham I
commit 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") modeled both MUX clocks and DIVIDER clocks in wiz. However during cleanup, it removed only the MUX clock provider. Remove the DIVIDER clock provider here. Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210310120840.16447-3-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Remove "regmap_field" from wiz_clk_{mux|div}_selKishon Vijay Abraham I
Both "struct wiz_clk_div_sel" and "struct wiz_clk_mux_sel" are static data that is common for all wiz instances. Including "struct regmap_field" for each of the wiz instances can yield undesirable results. Move "struct regmap_field" out of "struct wiz_clk_div_sel" and "struct wiz_clk_mux_sel" and make them point to constant data. So far no issues are observed since both these structures are not accessed outside the probe. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210310120840.16447-2-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30drivers: phy: add support for Armada CP110 UTMI PHYKonstantin Porotchkin
Add support for Marvell CP110 UTMI PHY driver allowing the USB2 port configuration independently from the boot loader setup. The CP110/CP115 dies have 2 UTMI PHYs that could be connected to two USB host controllers or to single USB device controller. Since there is only one USB device controller on die, only one of the UTMI PHYs could work in USB device mode. The CONFIG_PHY_MVEBU_CP110_UTMI should be enabled for usage of this driver. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Link: https://lore.kernel.org/r/20210307163343.25684-2-kostap@marvell.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-25phy: qualcomm: remove duplicate argumentZhang Yunkai
'HSUSB_CTRL_DPSEHV_CLAMP' in 'val' is duplicated. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Link: https://lore.kernel.org/r/20210319113612.494623-1-zhang.yunkai@zte.com.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-25phy: intel: Fix a typoBhaskar Chowdhury
s/subsytem/subsystem/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210320204055.26107-1-unixbhaskar@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-17phy: Add Sparx5 ethernet serdes PHY driverSteen Hegelund
Add the Microchip Sparx5 ethernet serdes PHY driver for the 6G, 10G and 25G interfaces available in the Sparx5 SoC. Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210218161451.3489955-4-steen.hegelund@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-17phy: Add media type and speed serdes configuration interfacesSteen Hegelund
Provide new phy configuration interfaces for media type and speed that allows e.g. PHYs used for ethernet to be configured with this information. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210218161451.3489955-3-steen.hegelund@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-15phy: phy-brcm-usb: select SOC_BRCMSTB on brcmstb onlyRafał Miłecki
phy-brcm-usb has some conditional init code required on selected brcmstb devices. Execution of that code depends on family / product detected by brcmstb soc code. For ARCH_BCM4908 brcmstb soc code always return 0 values as ids. Don't bother selecting & compiling that redundant driver. Depends-on: 149ae80b1d50 ("soc: bcm: brcmstb: add stubs for getting platform IDs") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210305152406.2588-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-15phy: qcom-usb-hs: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20210305100219.GA142595@embeddedor Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-15phy: ti: j721e-wiz: add missing of_node_putJunlin Yang
Fix OF node leaks by calling of_node_put in for_each_child_of_node when the cycle returns. Generated by: scripts/coccinelle/iterators/for_each_child.cocci Signed-off-by: Junlin Yang <yangjunlin@yulong.com> Link: https://lore.kernel.org/r/20210216082739.1414-1-angkery@163.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-15phy: rockchip-typec: add missing of_node_putJunlin Yang
Fix OF node leaks by calling of_node_put in for_each_available_child_of_node when the cycle returns. Generated by: scripts/coccinelle/iterators/for_each_child.cocci Signed-off-by: Junlin Yang <yangjunlin@yulong.com> Link: https://lore.kernel.org/r/20210216084847.1544-1-angkery@163.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-15phy: stm32: register usbphyc as clock provider of ck_usbo_48m clockAmelie Delaunay
ck_usbo_48m is generated by usbphyc PLL and used by OTG controller for Full-Speed use cases with dedicated Full-Speed transceiver. ck_usbo_48m is available as soon as the PLL is enabled. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210208114659.15269-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-12phy: tusb1210: use bitmasks to set VENDOR_SPECIFIC2Liam Beguin
Start by reading the content of the VENDOR_SPECIFIC2 register and update each bit field based on device properties when defined. The use of bit masks prevents fields from overriding each other and enables users to clear bits which are set by default, like datapolarity in this instance. Signed-off-by: Liam Beguin <lvb@xiphos.com> Link: https://lore.kernel.org/r/20201211191241.21306-1-liambeguin@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-10Merge tag 'phy-fixes2-5.11' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy: second round of phy fixes for v5.11 - rockchip: init return and vednor prefix to dt-property - cpcap: bool conversion fix - lantiq: clock enable fix - lgm: kconfig depends on x86 - mediatek: add mising MODULE_DEVICE_TABLE() * tag 'phy-fixes2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: Add missing MODULE_DEVICE_TABLE() phy: phy-brcm-sata: remove unneeded semicolon phy: USB_LGM_PHY should depend on X86 phy: lantiq: rcu-usb2: wait after clock enable phy: rockchip: emmc, add vendor prefix to dts properties devicetree: phy: rockchip-emmc optional add vendor prefix phy: cpcap-usb: remove unneeded conversion to bool phy: rockchip-emmc: emmc_phy_init() always return 0
2021-02-09Merge tag 'phy-for-5.12' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.12 - Updates: - Conversion to YAML binding for: - mtk-xsphy - mtk-tphy - mtk-ufs - HDMI PHY - MIPI DSI PHY - brcmstb-usb-phy - Support for BCM4908 usb phy - Support for Qualcomm SDX55 USB and QMP phy - Support for Qualcomm SM8350 aka Snapdragon 888 UFS and USB phy - Support for Qualcomm SDM660 USB and UFS phy - Support for Qualcomm SC8180X USB and UFS phy - Support for Qualcomm IPQ6018 USB phy - Stm32 phy updates * tag 'phy-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits) phy: cpcap-usb: Simplify bool conversion phy: qcom-qmp: make a const array static, makes object smaller phy: zynqmp: Simplify code by using dev_err_probe() phy: qcom-qmp: Add support for SM8350 UFS phy phy: qcom-qmp: Add UFS V5 registers found in SM8350 dt-bindings: phy: qcom,qmp: Add SM8350 UFS PHY bindings phy: qualcomm: usb28nm: Add MDM9607 init sequence dt-bindings: phy: qcom,qusb2: document ipq6018 compatible phy: qcom-qusb2: add QUSB2 support for IPQ6018 phy: qcom-qmp: Add SC8180X USB phy phy: qcom-qmp: Add SC8180X UFS phy dt-bindings: phy: qcom,qmp: Add SC8180X USB phy dt-bindings: phy: qcom,qmp: Add SC8180X UFS to the QMP binding dt-bindings: phy: qcom-qusb2: Document SDM660 compatible phy: qcom-qusb2: Add configuration for SDM660 phy: qcom-qusb2: Allow specifying default clock scheme dt-bindings: phy: qcom,usb-snps-femto-v2: Add SM8250 and SM8350 bindings phy: qcom-qmp: Add SM8350 USB QMP PHYs dt-bindings: phy: qcom,qmp: Add SM8150, SM8250 and SM8350 USB PHY bindings phy: qcom-qmp: Add support for SDX55 QMP PHY ...
2021-02-06phy: cpcap-usb: Simplify bool conversionYang Li
Fix the following coccicheck warning: ./drivers/phy/motorola/phy-cpcap-usb.c:146:31-36: WARNING: conversion to bool not needed here Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1611905915-50394-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-06phy: qcom-qmp: make a const array static, makes object smallerColin Ian King
Don't populate the const array cfg1_settings on the stack but instead make it static. Makes the object code smaller by 24 bytes: Before: text data bss dec hex filename 73585 20240 64 93889 16ec1 drivers/phy/qualcomm/phy-qcom-qmp.o After: text data bss dec hex filename 73465 20336 64 93865 16ea9 drivers/phy/qualcomm/phy-qcom-qmp.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210204180313.108876-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-06phy: zynqmp: Simplify code by using dev_err_probe()Michal Simek
Use already prepared dev_err_probe() introduced by commit a787e5400a1c ("driver core: add device probe log helper"). It simplifies EPROBE_DEFER handling. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/0df30548f721b10475a6cc5659beda102fec3c87.1612444300.git.michal.simek@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-06phy: qcom-qmp: Add support for SM8350 UFS phyVinod Koul
Add the tables for init sequences for UFS QMP phy found in SM8350 SoC. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210204165805.62235-4-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 20:20:33 +0000