summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2020-11-12pinctrl: jasperlake: Fix HOSTSW_OWN offsetEvan Green
GPIOs that attempt to use interrupts get thwarted with a message like: "pin 161 cannot be used as IRQ" (for instance with SD_CD). This is because the HOSTSW_OWN offset is incorrect, so every GPIO looks like it's owned by ACPI. Fixes: e278dcb7048b1 ("pinctrl: intel: Add Intel Jasper Lake pin controller support") Cc: stable@vger.kernel.org Signed-off-by: Evan Green <evgreen@chromium.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-12pinctrl: jasperlake: Unhide SPI group of pinsAndy Shevchenko
If the group of pins is hidden in the pin list it affects the register offset calculation despite fixed GPIO base. Hence, the offsets of all pins after the hidden group are broken. Instead we have to unhide the group and use a flag to exclude it from GPIO number space. Fixes: e278dcb7048b ("pinctrl: intel: Add Intel Jasper Lake pin controller support") Reported-by: Divagar Mohandass <divagar.mohandass@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-12pinctrl: lynxpoint: Enable pin configuration setting for GPIO chipAndy Shevchenko
It appears that pin configuration for GPIO chip hasn't been enabled yet due to absence of ->set_config() callback. Enable it here for Intel Lynxpoint PCH. Depends-on: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-12pinctrl: lynxpoint: Use defined constant for disabled bias explicitlyAndy Shevchenko
We have a specific constant to describe a disabled bias, i.e. GPIWP_NONE. Use it explicitly instead of making an assumption about its value. While at it, move argument assignment to the switch-case in lp_pin_config_get(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-11pinctrl: pinctrl-at91-pio4: Set irq handler and data in one goMartin Kaiser
Replace the two separate calls for setting the irq handler and data with a single irq_set_chained_handler_and_data() call. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20201108180144.28594-1-martin@kaiser.cx Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-11pinctrl: qcom: sdx55: update kconfig dependencyVinod Koul
Commit be117ca32261 ("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a dependency rather then a selected config") moved the qcom pinctrl drivers to have PINCTRL_MSM as dependency rather then a selected config, so do this change for SDX55 pinctrl driver as well. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201111043610.177168-1-vkoul@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-11pinctrl: nomadik: db8500: Add more detailed LCD groupsLinus Walleij
We need a more granular distribution among funcion A and function B for the LCD pins for the Samsung GT-I9070. Provide some new pin groups so we can configure this phone properly. Link: https://lore.kernel.org/r/20201110232330.2242167-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: qcom: Add SDX55 pincontrol driverJeevan Shriram
Add initial Qualcomm SDX55 pinctrl driver to support pin configuration with pinctrl framework for SDX55 SoC. [ported from downstream and tidy up] Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20201109062620.14566-3-vkoul@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10Merge tag 'intel-pinctrl-v5.10-2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.10-2 * Respect bias setting when comes from ACPI The following is an automated git shortlog grouped by driver: intel: - Set default bias in case no particular value given - Fix 2 kOhm bias which is 833 Ohm
2020-11-10pinctrl: ocelot: Add support for Serval platformsLars Povlsen
This patch adds support for Serval pinctrl, using the ocelot driver as basis. It adds pinconfig support as well, as supported by the platform. gclement: Split from a larger patch adding support all platforms in the same time. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20201106093118.965152-5-gregory.clement@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: ocelot: Add support for Luton platformsLars Povlsen
This patch adds support for Luton pinctrl, using the ocelot driver as basis. It adds pinconfig support as well, as supported by the platform. gclement: Split from a larger patch adding support all platforms in the same time. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20201106093118.965152-4-gregory.clement@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: ocelot: Remove unnecessary conversion to boolKaixu Xia
Fix the following coccicheck warning: ./drivers/pinctrl/pinctrl-ocelot.c:732:28-33: WARNING: conversion to bool not needed here Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Link: https://lore.kernel.org/r/1604651795-1220-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: qcom: Allow pinctrl-msm code to be loadable as a moduleJohn Stultz
Tweaks to allow pinctrl-msm code to be loadable as a module. This is needed in order to support having the qcom-scm driver, which pinctrl-msm calls into, configured as a module. This requires that we tweak Kconfigs selecting PINCTRL_MSM to also depend on QCOM_SCM || QCOM_SCM=n so that we match the module setting of QCOM_SCM. Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <maz@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Maulik Shah <mkshah@codeaurora.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-arm-msm@vger.kernel.org Cc: iommu@lists.linux-foundation.org Cc: linux-gpio@vger.kernel.org Link: https://lore.kernel.org/r/20201106042710.55979-2-john.stultz@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a ↵John Stultz
selected config This patch reworks PINCTRL_MSM to be a visible option, and instead of having the various SoC specific drivers select PINCTRL_MSM, this switches those configs to depend on PINCTRL_MSM. This is useful, as it will be needed in order to cleanly support having the qcom-scm driver, which pinctrl-msm calls into, configured as a module. Without this change, we would eventually have to add dependency lines to every config that selects PINCTRL_MSM, and that would becomes a maintenance headache. We also add PINCTRL_MSM to the arm64 defconfig to avoid surprises as otherwise PINCTRL_MSM/IPQ* options previously enabled, will be off. Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <maz@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Maulik Shah <mkshah@codeaurora.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-arm-msm@vger.kernel.org Cc: iommu@lists.linux-foundation.org Cc: linux-gpio@vger.kernel.org Link: https://lore.kernel.org/r/20201106042710.55979-1-john.stultz@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: amd: print debounce filter info in debugfsCoiby Xu
Print the status of debounce filter as follows, $ cat /sys/kernel/debug/gpio pin129 interrupt is disabled | interrupt is masked | disable wakeup in S0i3 state | disable wakeup in S3 state | disable wakeup in S4/S5 state| input is high | pull-up is disabled | Pull-down is disabled | output is disabled | debouncing filter disabled | 0x50000 pin130 interrupt is disabled | interrupt is masked | disable wakeup in S0i3 state | disable wakeup in S3 state | disable wakeup in S4/S5 state | input is high | pull-up is disabled | Pull-down is disabled | output is disabled | debouncing filter (high) enabled | debouncing timeout is 124800 (us)| 0x503c8 Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Link: https://lore.kernel.org/r/20201105231912.69527-4-coiby.xu@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: ingenic: Add lcd-8bit group for JZ4770Paul Cercueil
Add the "lcd-8bit" group to the "lcd" function. As "lcd-24bit" is a superset of "lcd-8bit", in theory the former could be modified to only contain the pins not already included in "lcd-8bit", just like how it's done for the JZ4740 and JZ4725B platforms. However, we can't do that without breaking Device Tree ABI, so in that case we have no choice but to have two groups containing the same pins. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20201101090104.5088-3-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: ingenic: Get rid of repetitive dataPaul Cercueil
Abuse the pin function pointer to store the pin function value directly, when all the pins of a group have the same function value. Now when the pointer value is <= 3 (unsigned), the pointer value is used as the pin function; otherwise it is used as a regular pointer. This drastically reduces the number of pin function tables needed, and drops .data usage by about 2 KiB. Additionally, the few pin function tables that are still around now contain u8 instead of int, since the largest number that will be stored is 3. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20201101090104.5088-2-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: mt7622: drop pwm ch7 as mt7622 only has 6 channelsFrank Wunderlich
mt7622 is reported by mediatek to have only 6 pwm channels so drop pindefines for 7th channel Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20201016204019.2606-4-linux@fw-web.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: qcom: add pinctrl driver for msm8953Vladimir Lypak
Add inititial pinctrl driver for MSM8953 platform. Compatible SoCs are: MSM8953, APQ8053, SDM(SDA)450, SDM(SDA)632. Based off CAF implementation. Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Vladimir Lypak <junak.pub@gmail.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201007160611.942754-1-junak.pub@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: qcom: sm8250: Specify PDC mapBjorn Andersson
Specify the PDC mapping for SM8250, so that gpio interrupts are propertly mapped to the wakeup IRQs of the PDC. Fixes: 4e3ec9e407ad ("pinctrl: qcom: Add sm8250 pinctrl driver.") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201028043642.1141723-1-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callbackMaulik Shah
When GPIOs that are routed to PDC are used as output they can still latch the IRQ pending at GIC. As a result the spurious IRQ was handled when the client driver change the direction to input to starts using it as IRQ. Currently such erroneous latched IRQ are cleared with .irq_enable callback however if the driver continue to use GPIO as interrupt and invokes disable_irq() followed by enable_irq() then everytime during enable_irq() previously latched interrupt gets cleared. This can make edge IRQs not seen after enable_irq() if they had arrived after the driver has invoked disable_irq() and were pending at GIC. Move clearing erroneous IRQ to .irq_request_resources callback as this is the place where GPIO direction is changed as input and its locked as IRQ. While at this add a missing check to invoke msm_gpio_irq_clear_unmask() from .irq_enable callback only when GPIO is not routed to PDC. Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1604561884-10166-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: amd: use higher precision for 512 RtcClkCoiby Xu
RTC is 32.768kHz thus 512 RtcClk equals 15625 usec. The documentation likely has dropped precision and that's why the driver mistakenly took the slightly deviated value. Cc: stable@vger.kernel.org Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/linux-gpio/2f4706a1-502f-75f0-9596-cc25b4933b6c@redhat.com/ Link: https://lore.kernel.org/r/20201105231912.69527-3-coiby.xu@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: amd: fix incorrect way to disable debounce filterCoiby Xu
The correct way to disable debounce filter is to clear bit 5 and 6 of the register. Cc: stable@vger.kerne.org Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/linux-gpio/df2c008b-e7b5-4fdd-42ea-4d1c62b52139@redhat.com/ Link: https://lore.kernel.org/r/20201105231912.69527-2-coiby.xu@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-05pinctrl: aspeed: Fix GPI only function problem.Billy Tsai
Some gpio pin at aspeed soc is input only and the prefix name of these pin is "GPI" only. This patch fine-tune the condition of GPIO check from "GPIO" to "GPI" and it will fix the usage error of banks D and E in the AST2400/AST2500 and banks T and U in the AST2600. Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20201030055450.29613-1-billy_tsai@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-05pinctrl: core: Add missing #ifdef CONFIG_GPIOLIBHe Zhe
To fix the following build warnings when CONFIG_GPIOLIB=n. drivers/pinctrl/core.c:1607:20: warning: unused variable 'chip' [-Wunused-variable] 1608 | struct gpio_chip *chip; | ^~~~ drivers/pinctrl/core.c:1606:15: warning: unused variable 'gpio_num' [-Wunused-variable] 1607 | unsigned int gpio_num; | ^~~~~~~~ drivers/pinctrl/core.c:1605:29: warning: unused variable 'range' [-Wunused-variable] 1606 | struct pinctrl_gpio_range *range; | ^~~~~ Fixes: f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file") Signed-off-by: He Zhe <zhe.he@windriver.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201028103921.22486-1-zhe.he@windriver.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-05pinctrl/meson: enable building as modulesKevin Hilman
Enable pinctrl drivers for 64-bit Amlogic SoCs to be built as modules. The default is still built-in, this only adds the option of building as modules. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201026183025.31768-1-khilman@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-05pinctrl: mcp23s08: Print error message when regmap init failsAndy Shevchenko
It is useful for debugging to have the error message printed when regmap initialisation fails. Add it to the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Martin Hundebøll <martin@geanix.com> Link: https://lore.kernel.org/r/20201009180856.4738-2-andriy.shevchenko@linux.intel.com Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-05pinctrl: mcp23s08: Use full chunk of memory for regmap configurationAndy Shevchenko
It appears that simplification of mcp23s08_spi_regmap_init() made a regression due to wrong size calculation for dev_kmemdup() call. It misses the fact that config variable is already a pointer, thus the sizeof() calculation is wrong and only 4 or 8 bytes were copied. Fix the parameters to devm_kmemdup() to copy a full chunk of memory. Fixes: 0874758ecb2b ("pinctrl: mcp23s08: Refactor mcp23s08_spi_regmap_init()") Reported-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Martin Hundebøll <martin@geanix.com> Link: https://lore.kernel.org/r/20201009180856.4738-1-andriy.shevchenko@linux.intel.com Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-04pinctrl: rockchip: create irq mapping in gpio_to_irqJianqun Xu
Remove totally irq mappings create in probe, the gpio irq mapping will be created when do gpio_to_irq -> rockchip_gpio_to_irq -> irq_create_mapping This patch can speed up system boot on, also abandon many unused irq mappings' create. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang<kever.yang@rock-chips.com> Link: https://lore.kernel.org/r/20201013063731.3618-4-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-04pinctrl: rockchip: enable gpio pclk for rockchip_gpio_to_irqJianqun Xu
There need to enable pclk_gpio when do irq_create_mapping, since it will do access to gpio controller. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang<kever.yang@rock-chips.com> Link: https://lore.kernel.org/r/20201013063731.3618-3-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-04pinctrl: lynxpoint: Unify initcall location in the codeAndy Shevchenko
Like in the other Intel pin control drivers, attach initcalls to the corresponding functions. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-04pinctrl: intel: Add Intel Alder Lake-S pin controller supportAndy Shevchenko
This driver adds pinctrl/GPIO support for Intel Alder Lake-S SoC. The GPIO controller is based on the next generation GPIO hardware but still compatible with the one supported by the Intel core pinctrl/GPIO driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-04pinctrl: intel: Add Intel Elkhart Lake pin controller supportAndy Shevchenko
This driver adds pinctrl/GPIO support for Intel Elkhart Lake SoC. The GPIO controller is based on the next generation GPIO hardware but still compatible with the one supported by the Intel core pinctrl/GPIO driver. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-02pinctrl: intel: Add blank line before endif in KconfigAndy Shevchenko
Add a blank line before endif directive in Kconfig for better readability. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-02pinctrl: intel: Add Intel Lakefield pin controller supportAndy Shevchenko
This driver adds pinctrl/GPIO support for Intel Lakefield SoC. The GPIO controller is based on the next generation GPIO hardware but still compatible with the one supported by the Intel core pinctrl/GPIO driver. Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-10-28pinctrl: ingenic: Fix invalid SSI pinsPaul Cercueil
The values for the SSI pins on GPIO chips D and E were off by 0x20. Fixes: d3ef8c6b2286 ("pinctrl: Ingenic: Add SSI pins support for JZ4770 and JZ4780.") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reported-by: Artur Rojek <contact@artur-rojek.eu> Link: https://lore.kernel.org/r/20201010192509.9098-1-paul@crapouillou.net Reviewed-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-26pinctrl: samsung: s3c24xx: remove unneeded breakTom Rix
A break is not needed if it is preceded by a return. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201020131520.29117-1-trix@redhat.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-10-26pinctrl: intel: Set default bias in case no particular value givenAndy Shevchenko
When GPIO library asks pin control to set the bias, it doesn't pass any value of it and argument is considered boolean (and this is true for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual drivers must behave well, when they got the resistance value of 1 Ohm, i.e. transforming it to sane default. In case of Intel pin control hardware the 5 kOhm sounds plausible because on one hand it's a minimum of resistors present in all hardware generations and at the same time it's high enough to minimize leakage current (will be only 200 uA with the above choice). Fixes: e57725eabf87 ("pinctrl: intel: Add support for hardware debouncer") Reported-by: Jamie McClymont <jamie@kwiius.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-10-26pinctrl: intel: Fix 2 kOhm bias which is 833 OhmAndy Shevchenko
2 kOhm bias was never an option in Intel GPIO hardware, the available matrix is: 000 none 001 1 kOhm (if available) 010 5 kOhm 100 20 kOhm As easy to get the 3 resistors are gated separately and according to parallel circuits calculations we may get combinations of the above where the result is always strictly less than minimal resistance. Hence, additional values can be: 011 ~833.3 Ohm 101 ~952.4 Ohm 110 ~4 kOhm 111 ~800 Ohm That said, convert TERM definitions to be the bit masks to reflect the above. While at it, enable the same setting for pull down case. Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support") Cc: Jamie McClymont <jamie@kwiius.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-10-26pinctrl: renesas: r8a7790: Add VIN1-B and VIN2-G pins, groups and functionsLad Prabhakar
Add pins, groups and functions for the VIN1-B [data/sync/field/clkenb/clk] and VIN2-G8. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200917195924.20384-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-10-14Merge tag 'pinctrl-v5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - NONE whatsoever, we don't even touch the core files this time around. New drivers: - New driver for the Toshiba Visconti SoC. - New subdriver for the Qualcomm MSM8226 SoC. - New subdriver for the Actions Semiconductor S500 SoC. - New subdriver for the Mediatek MT8192 SoC. - New subdriver for the Microchip SAMA7G5 SoC. Driver enhancements: - Intel Cherryview and Baytrail cleanups and refactorings. - Enhanced support for the Renesas R8A7790, more pins and groups. - Some optimizations for the MCP23S08 MCP23x17 variant. - Some cleanups around the Actions Semiconductor subdrivers. - A bunch of cleanups around the SH-PFC and Emma Mobile drivers. - The "SH-PFC" (literally SuperH pin function controller, I think) subdirectory is now renamed to the more neutral "renesas", as these are not very much centered around SuperH anymore. - Non-critical fixes for the Aspeed driver. - Non-critical fixes for the Ingenic (MIPS!) driver. - Fix a bunch of missing pins on the AMD pinctrl driver" * tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (78 commits) pinctrl: amd: Add missing pins to the pin group list dt-bindings: pinctrl: sunxi: Allow pinctrl with more interrupt banks pinctrl: visconti: PINCTRL_TMPV7700 should depend on ARCH_VISCONTI pinctrl: mediatek: Free eint data on failure pinctrl: single: fix debug output when #pinctrl-cells = 2 pinctrl: single: fix pinctrl_spec.args_count bounds check pinctrl: sunrisepoint: Modify COMMUNITY macros to be consistent pinctrl: cannonlake: Modify COMMUNITY macros to be consistent pinctrl: tigerlake: Fix register offsets for TGL-H variant pinctrl: Document pinctrl-single,pins when #pinctrl-cells = 2 pinctrl: mediatek: use devm_platform_ioremap_resource_byname() pinctrl: nuvoton: npcm7xx: Constify static ops structs pinctrl: mediatek: mt7622: add antsel pins/groups pinctrl: ocelot: simplify the return expression of ocelot_gpiochip_register() pinctrl: at91-pio4: add support for sama7g5 SoC dt-bindings: pinctrl: at91-pio4: add microchip,sama7g5 pinctrl: spear: simplify the return expression of tvc_connect() pinctrl: spear: simplify the return expression of spear310_pinctrl_probe pinctrl: sprd: use module_platform_driver to simplify the code pinctrl: Ingenic: Add I2S pins support for Ingenic SoCs. ...
2020-10-13Merge tag 'gpio-v5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This time very little driver changes but lots of core changes. We have some interesting cooperative work for ARM and Intel alike, making the GPIO subsystem more and more suitable for industrial systems and the like, in addition to the in-kernel users. We touch driver core (device properties) and lib/* by adding one simple string array free function, these are authored by Andy Shevchenko who is a well known and recognized core helpers maintainers so this should be fine. We also see some Android GKI-related modularization in the MXC drivers. Core changes: - The big core change is the updated (v2) userspace character device API. This corrects badly designed 64-bit alignment around the line events. We also add the debounce request feature. This echoes the often quotes passage from Frederick Brooks "The mythical man-month" to always throw one away, which we have seen before in things such as V4L2. So we put in a new one and deprecate and obsolete the old one. - All example tools in tools/gpio/* are migrated to the new API to set a good example. The libgpiod userspace library has been augmented to use this new API pretty much from day 1. - Some misc API hardening by using strn* function calls has been added as well. - Use the simpler IDA interface for GPIO chip instance enumeration. - Add device core function for counting string arrays in device properties. - Provide a generic library function kfree_strarray() that can be used throughout the kernel. Driver enhancements: - The DesignWare dwapb-gpio driver has been enhanced and now uses the IRQ handling in the gpiolib core. - The mockup and aggregator drivers have seen some substantial code clean-up and now use more of the core kernel inftrastructure. - Misc cleanups using dev_err_probe(). - The MXC drivers (Freescale/NXP) can now be built modularized, which makes modularized GKI Android kernels happy" * tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits) gpiolib: Update header block in gpiolib-cdev.h gpiolib: cdev: switch from kstrdup() to kstrndup() docs: gpio: add a new document to its index.rst gpio: pca953x: Add support for the NXP PCAL9554B/C tools: gpio: add debounce support to gpio-event-mon tools: gpio: add multi-line monitoring to gpio-event-mon tools: gpio: port gpio-event-mon to v2 uAPI tools: gpio: port gpio-hammer to v2 uAPI tools: gpio: rename nlines to num_lines tools: gpio: port gpio-watch to v2 uAPI tools: gpio: port lsgpio to v2 uAPI gpio: uapi: document uAPI v1 as deprecated gpiolib: cdev: support setting debounce gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL gpiolib: cdev: support edge detection for uAPI v2 gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL gpiolib: add build option for CDEV v1 ABI gpiolib: make cdev a build option ...
2020-10-12Merge tag 'irq-core-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core: - Allow trimming of interrupt hierarchy to support odd hardware setups where only a subset of the interrupts requires the full hierarchy. - Allow the retrigger mechanism to follow a hierarchy to simplify driver code. - Provide a mechanism to force enable wakeup interrrupts on suspend. - More infrastructure to handle IPIs in the core code Architectures: - Convert ARM/ARM64 IPI handling to utilize the interrupt core code. Drivers: - The usual pile of new interrupt chips (MStar, Actions Owl, TI PRUSS, Designware ICTL) - ARM(64) IPI related conversions - Wakeup support for Qualcom PDC - Prevent hierarchy corruption in the NVIDIA Tegra driver - The usual small fixes, improvements and cleanups all over the place" * tag 'irq-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) dt-bindings: interrupt-controller: Add MStar interrupt controller irqchip/irq-mst: Add MStar interrupt controller support soc/tegra: pmc: Don't create fake interrupt hierarchy levels soc/tegra: pmc: Allow optional irq parent callbacks gpio: tegra186: Allow optional irq parent callbacks genirq/irqdomain: Allow partial trimming of irq_data hierarchy irqchip/qcom-pdc: Reset PDC interrupts during init irqchip/qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag pinctrl: qcom: Use return value from irq_set_wake() call pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags ARM: Handle no IPI being registered in show_ipi_list() MAINTAINERS: Add entries for Actions Semi Owl SIRQ controller irqchip: Add Actions Semi Owl SIRQ controller dt-bindings: interrupt-controller: Add Actions SIRQ controller binding dt-bindings: dw-apb-ictl: Update binding to describe use as primary interrupt controller irqchip/dw-apb-ictl: Add primary interrupt controller support irqchip/dw-apb-ictl: Refactor priot to introducing hierarchical irq domains genirq: Add stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER ...
2020-10-07pinctrl: amd: Add missing pins to the pin group listShyam Sundar S K
Some of the pins were not exposed in the initial driver or kept as reserved. Exposing all of them now. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20201007111220.744348-1-Shyam-sundar.S-k@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-07pinctrl: visconti: PINCTRL_TMPV7700 should depend on ARCH_VISCONTIGeert Uytterhoeven
The Toshiba Visconti TMPV7700 series pin controller is only present on Visconti SoCs. Hence add a dependency on ARCH_VISCONTI, to prevent asking the user about this driver when configuring a kernel without Visconti platform support. Fixes: a68a7844264e4fb9 ("pinctrl: visconti: Add Toshiba Visconti SoCs pinctrl support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20201005125049.26926-1-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-07pinctrl: mediatek: Free eint data on failureEnric Balletbo i Serra
The pinctrl driver can work without the EINT resource, but, if it is expected to have this resource but the mtk_build_eint() function fails after allocating their data (because can't get the resource or can't map the irq), the data is not freed and you end with a NULL pointer dereference. Fix this by freeing the data if mtk_build_eint() fails, so pinctrl still works and doesn't hang. This is noticeable after commit f97dbf48ca43 ("irqchip/mtk-sysirq: Convert to a platform driver") on MT8183 because, due this commit, the pinctrl driver fails to map the irq and spots the following bug: [ 1.947597] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 1.956404] Mem abort info: [ 1.959203] ESR = 0x96000004 [ 1.962259] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.967565] SET = 0, FnV = 0 [ 1.970613] EA = 0, S1PTW = 0 [ 1.973747] Data abort info: [ 1.976619] ISV = 0, ISS = 0x00000004 [ 1.980447] CM = 0, WnR = 0 [ 1.983410] [0000000000000004] user address but active_mm is swapper [ 1.989759] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1.995322] Modules linked in: [ 1.998371] CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc1+ #44 [ 2.004715] Hardware name: MediaTek krane sku176 board (DT) [ 2.010280] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 2.015850] pc : mtk_eint_set_debounce+0x48/0x1b8 [ 2.020546] lr : mtk_eint_set_debounce+0x34/0x1b8 [ 2.025239] sp : ffff80001008baa0 [ 2.028544] x29: ffff80001008baa0 x28: ffff0000ff7ff790 [ 2.033847] x27: ffff0000f9ec34b0 x26: ffff0000f9ec3480 [ 2.039150] x25: ffff0000fa576410 x24: ffff0000fa502800 [ 2.044453] x23: 0000000000001388 x22: ffff0000fa635f80 [ 2.049755] x21: 0000000000000008 x20: 0000000000000000 [ 2.055058] x19: 0000000000000071 x18: 0000000000000001 [ 2.060360] x17: 0000000000000000 x16: 0000000000000000 [ 2.065662] x15: ffff0000facc8470 x14: ffffffffffffffff [ 2.070965] x13: 0000000000000001 x12: 00000000000000c0 [ 2.076267] x11: 0000000000000040 x10: 0000000000000070 [ 2.081569] x9 : ffffaec0063d24d8 x8 : ffff0000fa800270 [ 2.086872] x7 : 0000000000000000 x6 : 0000000000000011 [ 2.092174] x5 : ffff0000fa800248 x4 : ffff0000fa800270 [ 2.097476] x3 : ffff8000100c5000 x2 : 0000000000000000 [ 2.102778] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.108081] Call trace: [ 2.110520] mtk_eint_set_debounce+0x48/0x1b8 [ 2.114870] mtk_gpio_set_config+0x5c/0x78 [ 2.118958] gpiod_set_config+0x5c/0x78 [ 2.122786] gpiod_set_debounce+0x18/0x28 [ 2.126789] gpio_keys_probe+0x50c/0x910 [ 2.130705] platform_drv_probe+0x54/0xa8 [ 2.134705] really_probe+0xe4/0x3b0 [ 2.138271] driver_probe_device+0x58/0xb8 [ 2.142358] device_driver_attach+0x74/0x80 [ 2.146532] __driver_attach+0x58/0xe0 [ 2.150274] bus_for_each_dev+0x70/0xc0 [ 2.154100] driver_attach+0x24/0x30 [ 2.157666] bus_add_driver+0x14c/0x1f0 [ 2.161493] driver_register+0x64/0x120 [ 2.165319] __platform_driver_register+0x48/0x58 [ 2.170017] gpio_keys_init+0x1c/0x28 [ 2.173672] do_one_initcall+0x54/0x1b4 [ 2.177499] kernel_init_freeable+0x1d0/0x238 [ 2.181848] kernel_init+0x14/0x118 [ 2.185328] ret_from_fork+0x10/0x34 [ 2.188899] Code: a9438ac1 12001266 f94006c3 121e766a (b9400421) [ 2.194991] ---[ end trace 168cf7b3324b6570 ]--- [ 2.199611] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.207260] SMP: stopping secondary CPUs [ 2.211294] Kernel Offset: 0x2ebff4800000 from 0xffff800010000000 [ 2.217377] PHYS_OFFSET: 0xffffb50500000000 [ 2.221551] CPU features: 0x0240002,2188200c [ 2.225811] Memory Limit: none [ 2.228860] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Fixes: 89132dd8ffd2 ("pinctrl: mediatek: extend eint build to pinctrl-mtk-common-v2.c") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20201001142511.3560143-1-enric.balletbo@collabora.com [rebased on changed infrastructure] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-06pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flagMaulik Shah
Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag to enable/unmask the wakeirqs during suspend entry. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1601267524-20199-5-git-send-email-mkshah@codeaurora.org
2020-10-06pinctrl: qcom: Use return value from irq_set_wake() callMaulik Shah
msmgpio irqchip was not using return value of irq_set_irq_wake() callback since previously GIC-v3 irqchip neither had IRQCHIP_SKIP_SET_WAKE flag nor it implemented .irq_set_wake callback. This lead to irq_set_irq_wake() return error -ENXIO. However from 'commit 4110b5cbb014 ("irqchip/gic-v3: Allow interrupt to be configured as wake-up sources")' GIC irqchip has IRQCHIP_SKIP_SET_WAKE flag. Use return value from irq_set_irq_wake() and irq_chip_set_wake_parent() instead of always returning success. Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1601267524-20199-3-git-send-email-mkshah@codeaurora.org
2020-10-06pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flagsMaulik Shah
Both IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags are already set for msmgpio's parent PDC irqchip but GPIO interrupts do not get masked during suspend or during setting irq type since genirq checks irqchip flag of msmgpio irqchip which forwards these calls to its parent PDC irqchip. Add irqchip specific flags for msmgpio irqchip to mask non wakeirqs during suspend and mask before setting irq type. Masking before changing type make sures any spurious interrupt is not detected during this operation. Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1601267524-20199-2-git-send-email-mkshah@codeaurora.org
2020-10-01pinctrl: single: fix debug output when #pinctrl-cells = 2Drew Fustini
The debug output in pcs_parse_one_pinctrl_entry() needs to be updated to print the correct pinctrl register value when #pinctrl-cells is 2. Fixes: a13395418888 ("pinctrl: single: parse #pinctrl-cells = 2") Reported-by: Trent Piepho <tpiepho@gmail.com> Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/linux-omap/3139716.CMS8C0sQ7x@zen.local/ Link: https://lore.kernel.org/r/20200913230306.2061645-1-drew@beagleboard.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-13 04:39:22 +0000