summaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2013-04-01regulator: ab8500: Correct TVOUT regulator enable timeLee Jones
Update TVOUT regulator to match specification. Was 10ms - changed to 500us. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01regulator: ab8500: Add support for the ab9540Lee Jones
To obtain full AB9540 regulator support, the AB8500 regulator driver first needs to know its register layout and their initialisation values for each. That information is provided via a couple of large data structures which we provide here. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01regulator: ab8500: Prepare the driver for additional platformsLee Jones
More platforms are to be supported by the AB8500 regulator driver, so in this patch we prepare for their arrival. Instead of using the AB8500 settings blindly, we provide an infrastructure where adding a new platform is as easy as providing a couple of platform specific data structures. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-30regulator: max1586: Constify v6_voltages_uv tableAxel Lin
Make v6_voltages_uv to be const unsigned int. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-29regulator: ab8500: Update info->update_val only when successfully update ↵Axel Lin
register Don't update info->update_val if write to the register fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-29regulator: ab8500: Init debug from regulator driverLee Jones
The purpose of this patch is to guarantee that ab8500-debug will record the regulator registers before they are modified by the ab8500 regulator driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-29regulator: ab8500: Remove USB regulatorLee Jones
The USB regulator is controlled by hardware. The software support was only needed for early hardware (ED) which is no longer supported. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-29regulator: ab8500-ext: Add HW request supportBengt Jonsson
Support for HW request is added in the external regulator driver. A flag in the board configuration can be set to let HW control the regulator when there is no SW request. This means that the regulator will be put in high power mode when there is a SW request and in HW-request mode otherwise. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-29regulator: ab8500-ext: New driver to control external regulatorsLee Jones
The ABx500 is capable of controlling three external regulator supplies. Most commonly on and off are supported, but if an external regulator chipset or power supply supports high-power and low-power mode settings, we can control those too. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-28regulator: palmas: add input supply namesLaxman Dewangan
Palmas regulator support the different input supply pins for each of the rails. Fill the regulator info data with their input supply pin names. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-28regulator: ab8500: Amend the update value for AB8500_LDO_INTCORE regulatorLee Jones
The issues probably originated from a typo in the initial submission. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-28regulator: ab8500: Clean out SoC registersLee Jones
Clean out initialisation that is handled by SoC. Regulator settings for Vpll (partly), Vsmps1, Vsmps2, Vsmps3 (partly), Vrf1, Varm, Vape, Vbb, Vmod are cleaned out. They should not be touched by the kernel. We also update many of the initialisation values to be more in-line with the current development efforts of ST-Ericsson internal engineers. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-27regulator: ab8500: Remove set_voltage_time_sel and delay settingAxel Lin
The data sheet does not specify time delay for voltage selection, thus remove set_voltage_time_sel and delay setting. Note, currently set_voltage_time_sel callback returns 0 due to missing delay settings. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-27regulator: ab8500: Add missing enable_time settingsAxel Lin
Base on the data provide by Bengt Jönsson, add below enable_time settings: Worst case enable time from data sheet: Vana: enable time = 140 us Vaux1/2: enable time = 200 us Vaux3: enable time = 450 us Vintcore: enable time = 750 us Vamic1/2: enable time = 500 us Vdmic: enable time = 420 us VTVout: enable time = 500 us Vaudio: enable time = 140 us Vusb: enable time = 150 us This discussion thread is available at: https://lkml.org/lkml/2013/3/26/795 Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26regulator: ab8500: Don't update is_enabled flag in error pathsAxel Lin
This avoid setting is_enabled flag to wrong status if enable/disable fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26regulator: arizona: Increase ramp delay for high current regulatorsMark Brown
As per latest evaluation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-25regulator: ab8500: Use regulator_list_voltage_linear for fixed voltageAxel Lin
Both ab8500_regulator_mode_ops and ab8500_regulator_ops do not have volt_table setting, thus we can not use regulator_list_voltage_table for them. However, they have min_uV setting with n_voltages = 1, so use regulator_list_voltage_linear instead. Also remove setting set_voltage_time_sel for ab8500_regulator_mode_ops. It is used only for fixed voltage, so it does not need to implement set_voltage_time_sel. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-25regulator: ab8500: Fix build errorAxel Lin
Fix below build error: CC drivers/regulator/ab8500.o drivers/regulator/ab8500.c:500:23: error: 'ab8500_regulator_fixed_ops' undeclared here (not in a function) drivers/regulator/ab8500.c: In function 'ab8500_regulator_probe': drivers/regulator/ab8500.c:972:8: warning: assignment from incompatible pointer type [enabled by default] make[2]: *** [drivers/regulator/ab8500.o] Error 1 make[1]: *** [drivers/regulator] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-25regulator: as3711: add OF supportGuennadi Liakhovetski
AS3711 regulator OF support only evaluates standard regulator DT properties. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-25regulator: palmas remove palmas-charger option from DT bindingsIan Lartey
Signed-off-by: Ian Lartey <ian@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-25regulator: Fix typo in of_get_regulator function commentsMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-22regulator: ab8500: Separate regulator and MFD platform dataBengt Jonsson
The ab8500 MFD should not have knowledge about regulator- specific platform data like number of regulators and regulator registers. As the regulator platform data is about to grow with external regulators, this information is moved to a new structure provided by the regulator driver. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Yvan FILLION <yvan.fillion@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-22regulator: ab8500: Another push to synchronise recent AB8500 developmentsLee Jones
This patch ensures that many of the recent developments pertaining to the AB8500 regulator device are propagated out into the public arena. It aims to update some of the existing initialisation values in accordance with internal ST-Ericsson code submissions. This single patch was originally a collection of updates which have been squashed together to aid with clarity. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-22ARM: ux500: regulators: Add mask for configurationLee Jones
There is already before a register mask in the regulator driver to allow some bits of a register to be initialized. The register value is defined in the board configuration. This patch puts a mask in the board configuration to specify which bits should actually be altered. The purpose with this patch is to avoid future mistakes when updating the allowed bits in the regulator driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-22regulator: ab8500: Added get_optimum_mode on regulators with idle modeBengt Jonsson
With this change, Vtvout, Vintcore12, Vaux1, 2 and 3 regulators support DRMS (Dynamic Regulator Mode Switching) which will dynamically handle requests for max current consumption from several consumers and select a suitable regulator mode. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-22regulator: ab8500: Add set_mode/get_mode supportEmeric Vigier
Signed-off-by: Ludovic Barré <ludovic.barre@stericsson.com> Signed-off-by: Emeric Vigier <emeric.vigier@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-22regulator: ab8500: Further populate initialisation registersLee Jones
This patch supplies access to some extra settings provided by the AB8500 regulator device. We also update some of the existing initialisation values in accordance with internal ST-Ericsson code submissions. This single patch was originally a collection of updates which have been squashed together to aid with clarity. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-20regulator: fan53555: Use PTR_RET functionAlexandru Gheorghiu
Used PTR_RET function instead of IS_ERR and PTR_ERR. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-20regulator: palmas: rename probe/remove callback functionsLaxman Dewangan
When palmas regulator probe creates stack dump during initialization due to some crash, it prints the call trace as follows: [3.166321] [<c028fa20>] (_regmap_read+0x5c/0xa8) from [<c028fab0>] (regmap_read+0x44/0x5c) [3.174669] [<c028fab0>] (regmap_read+0x44/0x5c) from [<c023062c>] (palmas_probe+0x240/0x7d0) [3.183193] [<c023062c>] (palmas_probe+0x240/0x7d0) from [<c0284064>] (platform_drv_probe+0x14/0x18) [3.192322] [<c0284064>] (platform_drv_probe+0x14/0x18) from [<c0282ee4>] (driver_probe_device+0x104/0x214) [3.202055] [<c0282ee4>] (driver_probe_device+0x104/0x214) from [<c028167c>] (bus_for_each_drv+0x5c/0x88) The palmas_probe is current name but it helps on debugging if the function name is more appropriate to the sub-module name. Renaming the palmas_probe() to palmas_regulator_probe() and palmas_remove() to palams_regulator_remove(). Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12regulator: palmas: Use of_property_read_bool to read "ti,warm-reset" DT propertyAxel Lin
It does not make sense to assign return value of of_property_read_u32() to pdata->reg_init[idx]->warm_reset. Use of_property_read_bool() to read "ti,warm-reset" DT property instead which will return correct setting for pdata->reg_init[idx]->warm_reset. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-08regulator: palmas correct dt parsingGraeme Gregory
Fix the DT parsing to agree with the bindings document. Some small changes to the value names and also fix the handling of boolean values. They were previously using prop = 1/0, now just use of_property_read_bool calls. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-05regulator: max8649: Use enable_is_inverted flag with regulator_enable_regmap ↵Axel Lin
and friends APIs Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-05regulator: 88pm8607: Use enable_is_inverted flag with ↵Axel Lin
regulator_enable_regmap and friends APIs Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-05regulator: core: Add enable_is_inverted flag to indicate set enable_mask ↵Axel Lin
bits to disable Add enable_is_inverted flag to indicate set enable_mask bits to disable when using regulator_enable_regmap and friends APIs. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-05Merge remote-tracking branch 'regulator/fix/twl' into tmpMark Brown
2013-03-05Merge remote-tracking branch 'regulator/fix/palmas' into tmpMark Brown
2013-03-05Merge remote-tracking branch 'regulator/fix/doc' into tmpMark Brown
2013-03-05Merge remote-tracking branch 'regulator/fix/db8500' into tmpMark Brown
2013-03-04regulator: tps6586x: Use dev_err rather than dev_warn for error messageAxel Lin
tps6586x_regulator_set_slew_rate() returns -EINVAL when having slew rate settings for other than SM0/1, thus use dev_err rather than dev_warn. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04regulator: tps6586x: (cosmetic) simplify a conditionalGuennadi Liakhovetski
of_node_put() is called on either branch of a conditional, simplify the code by only calling it once. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04regulator: s5m8767: adjust duplicate testJulia Lawall
Delete successive tests to the same location. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04regulator: palmas: Change the DT node property names to follow the conventionJ Keerthy
DT node properties should not have "_". Replacing them by "-". Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04regulators: max8998.c: use dev_err() instead of printk()Thiago Farina
Fixes the following checkpatch warning: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Thiago Farina <tfarina@chromium.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04regulator: max8925: Remove unused parameter from max8925_regulator_dt_initAxel Lin
The info parameter is not used at all, remove it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04regulator: lp8788-ldo: use ena_pin of regulator-core for external controlKim, Milo
Regulator core driver provides enable GPIO control for enabling/disabling a regulator. Now, enable GPIO is shared among regulators. Use this internal working, so unnecessary code are removed. GPIO enable pin configurations are added in digital LDO and analog LDO drivers. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04regulator: core: use regulator_ena_pin memberKim, Milo
The regulator_dev has regulator_enable_gpio structure. 'ena_gpio' and 'ena_gpio_invert' were moved to in regulator_enable_gpio. regulator_dev ---> regulator_enable_gpio .ena_gpio .gpio .ena_gpio_invert .ena_gpio_invert Pointer, 'ena_pin' is used for checking valid enable GPIO pin. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04regulator: core: manage enable GPIO listKim, Milo
To support shared enable GPIO pin, replace GPIO code with new static functions Reference count: 'enable_count' Balance the reference count of each GPIO and actual pin control. The count is incremented with enabling GPIO. On the other hand, it is decremented on disabling GPIO. Actual GPIO pin is enabled at the initial use.(enable_count = 0) The pin is disabled if it is not used(shared) any more. (enable_count <=1) Regardless of the enable count, update GPIO state of the regulator. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04regulator: core: support shared enable GPIO conceptKim, Milo
A Regulator can be enabled by external GPIO pin. This is configurable in the regulator_config. At this moment, the GPIO can be owned by only one regulator device. In some devices, multiple regulators are enabled by shared one GPIO pin. This patch extends this limitation, enabling shared enable GPIO of regulators. New list for enable GPIO: 'regulator_ena_gpio_list' This manages enable GPIO list. New structure for supporting shared enable GPIO: 'regulator_enable_gpio' The enable count is used for balancing GPIO control count. This count is incremented when GPIO is enabled. On the other hand, it's decremented when GPIO is disabled. Reference count: 'request_count' The reference count, 'request_count' is incremented/decremented on requesting/freeing the GPIO. This count makes sure only free the GPIO when it has no users. How it works If the GPIO is already used, skip requesting new GPIO usage. The GPIO is new one, request GPIO function and add it to the list of enable GPIO. This list is used for balancing enable GPIO count and pin control. Updating a GPIO and invert code moved 'ena_gpio' and 'ena_gpio_invert' of the regulator_config were moved to new function, regulator_ena_gpio_request(). Use regulator_enable_pin structure rather than regulator_dev. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-01regulator: fixed regulator_bulk_enable unwinding codeAndrzej Hajda
Unwinding code disables all successfully enabled regulators. Error is logged for every failed regulator. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-01regulator: twl: Remove TWL6030_FIXED_RESOURCEAxel Lin
TWL6030_FIXED_RESOURCE is not used now, remove it. TWL6030_FIXED_RESOURCE is not used since commit e76ab829cc "regulator: twl: Remove references to the twl4030 regulator" twl6030_fixed_resource is removed by commit 029dd3cef "regulator: twl: Remove another unused variable warning". Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit (git 2.34.1) at 2025-09-23 17:55:42 +0000