summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)Author
2021-08-23scsi: qla2xxx: Open-code qla2xxx_eh_target_reset()Hannes Reinecke
Device reset and target reset will be using different calling sequences, so open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_target_reset(). No functional changes. Link: https://lore.kernel.org/r/20210819091913.94436-3-hare@suse.de Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Do not call fc_block_scsi_eh() during bus resetHannes Reinecke
When calling bus reset the driver will be doing a full SAN resync, so there is no need to wait for any pending RSCNs; they'll be re-issued during resync anyway. Link: https://lore.kernel.org/r/20210819091913.94436-2-hare@suse.de Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Update version to 10.02.06.200-kNilesh Javali
Link: https://lore.kernel.org/r/20210817051315.2477-13-njavali@marvell.com Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: edif: Fix returnvar.cocci warningskernel test robot
drivers/scsi/qla2xxx/qla_edif.c:213:25-29: Unneeded variable: "rval". Return "0" on line 264 Remove unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci Link: https://lore.kernel.org/r/20210817051315.2477-12-njavali@marvell.com Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Fix NVMe session down detectionQuinn Tran
When Target port transitions personality from one to another (NVMe <--> FCP), there could be some overlap of the two where one layer is going down while the other layer is coming up. This overlap can cause temporary I/O error. Detect those errors/transitions and recover from them. Triggers session tear down and allow relogin to re-drive the connection under the following conditions: - NVMe command error - On PRLO + N2N (rida format 2) Link: https://lore.kernel.org/r/20210817051315.2477-11-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Fix NVMe retryQuinn Tran
For target port that register itself as both FCP + NVMe, initiator driver will try to login one mode at a time. If the last mode did not succeed, then driver will try the other mode. When error is encountered, current code only flip to other mode one time (NVMe->FCP) and remain on the last mode. Driver wrongly assumed target port does not support PRLI NVMe, instead it was not ready to receive PRLI. This patch will alternate back and forth on every PRLI failure until login retry count has depleted or it is succeeded. Link: https://lore.kernel.org/r/20210817051315.2477-10-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Fix hang on NVMe command timeoutsArun Easi
The abort callback gets called only when it gets posted to firmware. The refcounting is done properly in the callback. On internal errors, the callback is not invoked leading to a hung I/O. Fix this by having separate error code when command gets returned from firmware. Link: https://lore.kernel.org/r/20210817051315.2477-9-njavali@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Fix NVMe | FCP personality changeQuinn Tran
Currently driver saves the personality type (FCP|NVMe) at the start of first discovery of the remote device. If the remote device personality do change over time, then qla driver needs to present that to user to decide. Link: https://lore.kernel.org/r/20210817051315.2477-8-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: edif: Do secure PLOGI when auth app is presentQuinn Tran
For initiator mode, always do secure login when authentication app started. Also remove redundant flags to indicate secure connection. Link: https://lore.kernel.org/r/20210817051315.2477-7-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: edif: Add N2N support for EDIFQuinn Tran
For EDIF + N2N to work, firmware 9.8 or later is required. The driver will pause after PLOGI to allow app to authenticate. Once authentication completes, app will tell driver to do PRLI. Link: https://lore.kernel.org/r/20210817051315.2477-6-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Fix hang during NVMe session tear downArun Easi
The following hung task call trace was seen: [ 1230.183294] INFO: task qla2xxx_wq:523 blocked for more than 120 seconds. [ 1230.197749] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1230.205585] qla2xxx_wq D 0 523 2 0x80004000 [ 1230.205636] Workqueue: qla2xxx_wq qlt_free_session_done [qla2xxx] [ 1230.205639] Call Trace: [ 1230.208100] __schedule+0x2c4/0x700 [ 1230.211607] schedule+0x38/0xa0 [ 1230.214769] schedule_timeout+0x246/0x2f0 [ 1230.222651] wait_for_completion+0x97/0x100 [ 1230.226921] qlt_free_session_done+0x6a0/0x6f0 [qla2xxx] [ 1230.232254] process_one_work+0x1a7/0x360 ...when device side port resets were done. Abort threads were getting out without processing due to the "deleted" flag check. The delete thread, meanwhile, could not proceed with a logout (that would have cleared out pending requests) as the logout IOCB work was not progressing. It appears like the hung qlt_free_session_done() thread is causing the ha->wq works on hold. The qlt_free_session_done() was hung waiting for nvme_fc_unregister_remoteport() + localport_delete cb to be complete, which would only happen when all I/Os are released. Fix this by allowing abort to progress until device delete is completely done. This should make the qlt_free_session_done() proceed without hang and thus clear up the deadlock. Link: https://lore.kernel.org/r/20210817051315.2477-5-njavali@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: edif: Fix EDIF enable flagQuinn Tran
edif_enabled is prematurely turned on if hardware is capable of handling the feature. However, firmware also needs to support EDIF before enabling this bit. Link: https://lore.kernel.org/r/20210817051315.2477-4-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: edif: Reject AUTH ELS on session downQuinn Tran
Reject inflight AUTH ELS if driver is going through session recovery. Link: https://lore.kernel.org/r/20210817051315.2477-3-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: edif: Fix stale sessionQuinn Tran
When firmware indicates session has been torn down via UPDATE SA IOCB or ELS Passthrough IOCB, the driver needs to also tear down the session. Link: https://lore.kernel.org/r/20210817051315.2477-2-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Update version to 10.02.06.100-kNilesh Javali
Link: https://lore.kernel.org/r/20210810043720.1137-15-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Sync queue idx with queue_pair_map idxSaurav Kashyap
The first invocation of function find_first_zero_bit will return 0 and queue_id gets set to 0. An index of queue_pair_map also gets set to 0. qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs); set_bit(qpair_id, ha->qpair_qid_map); ha->queue_pair_map[qpair_id] = qpair; In the alloc_queue callback driver checks the map, if queue is already allocated: ha->queue_pair_map[qidx] This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8) since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus is less than 8, max_qpairs is less than 8. This creates wrong value returned as qpair. [ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2 [ 1572.354458] general protection fault: 0000 [#1] SMP PTI [ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G IOE --------- - - 4.18.0-304.el8.x86_64 #1 [ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013 [ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn [ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx] [ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00 <f0> 41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0 [ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246 [ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001 [ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800 [ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800 [ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000 [ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000 [ 1572.354494] FS: 0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000 [ 1572.354495] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0 [ 1572.354497] Call Trace: [ 1572.354503] ? check_preempt_curr+0x62/0x90 [ 1572.354506] ? dma_direct_map_sg+0x72/0x1f0 [ 1572.354509] ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc] [ 1572.354511] ? blk_mq_dispatch_rq_list+0x11c/0x730 [ 1572.354515] ? __switch_to_asm+0x35/0x70 [ 1572.354516] ? __switch_to_asm+0x41/0x70 [ 1572.354518] ? __switch_to_asm+0x35/0x70 [ 1572.354519] ? __switch_to_asm+0x41/0x70 [ 1572.354521] ? __switch_to_asm+0x35/0x70 [ 1572.354522] ? __switch_to_asm+0x41/0x70 [ 1572.354523] ? __switch_to_asm+0x35/0x70 [ 1572.354525] ? entry_SYSCALL_64_after_hwframe+0xb9/0xca [ 1572.354527] ? __switch_to_asm+0x41/0x70 [ 1572.354529] ? __blk_mq_sched_dispatch_requests+0xc6/0x170 [ 1572.354531] ? blk_mq_sched_dispatch_requests+0x30/0x60 [ 1572.354532] ? __blk_mq_run_hw_queue+0x51/0xd0 [ 1572.354535] ? process_one_work+0x1a7/0x360 [ 1572.354537] ? create_worker+0x1a0/0x1a0 [ 1572.354538] ? worker_thread+0x30/0x390 [ 1572.354540] ? create_worker+0x1a0/0x1a0 [ 1572.354541] ? kthread+0x116/0x130 [ 1572.354543] ? kthread_flush_work_fn+0x10/0x10 [ 1572.354545] ? ret_from_fork+0x35/0x40 Fix is to use index 0 for admin and first IO queue. Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Changes to support kdump kernel for NVMe BFSSaurav Kashyap
The MSI-X and MSI calls fails in kdump kernel. Because of this qla2xxx_create_qpair() fails leading to .create_queue callback failure. The fix is to return existing qpair instead of allocating new one and allocate a single hw queue. [ 19.975838] qla2xxx [0000:d8:00.1]-00c7:11: MSI-X: Failed to enable support, giving up -- 16/-28. [ 19.984885] qla2xxx [0000:d8:00.1]-0037:11: Falling back-to MSI mode -- ret=-28. [ 19.992278] qla2xxx [0000:d8:00.1]-0039:11: Falling back-to INTa mode -- ret=-28. .. .. .. [ 21.141518] qla2xxx [0000:d8:00.0]-2104:2: qla_nvme_alloc_queue: handle 00000000e7ee499d, idx =1, qsize 32 [ 21.151166] qla2xxx [0000:d8:00.0]-0181:2: FW/Driver is not multi-queue capable. [ 21.158558] qla2xxx [0000:d8:00.0]-2122:2: Failed to allocate qpair [ 21.164824] nvme nvme0: NVME-FC{0}: reset: Reconnect attempt failed (-22) [ 21.171612] nvme nvme0: NVME-FC{0}: Reconnect attempt in 2 seconds Link: https://lore.kernel.org/r/20210810043720.1137-13-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Changes to support kdump kernelSaurav Kashyap
Avoid allocating firmware dump and only allocate a single queue for a kexec kernel. Link: https://lore.kernel.org/r/20210810043720.1137-12-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Suppress unnecessary log messages during loginArun Easi
Suppress logging of retryable errors. These can still be seen if extended logging is enabled. Link: https://lore.kernel.org/r/20210810043720.1137-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Fix NPIV create erroneous errorQuinn Tran
When user creates multiple NPIVs, the switch capabilities field is checked before a vport is allowed to be created. This field is being toggled if a switch scan is in progress. This creates erroneous reject of vport create. Link: https://lore.kernel.org/r/20210810043720.1137-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Fix unsafe removal from linked listQuinn Tran
On NPIV delete, the VPort is taken off a linked list in an unsafe manner. The check for VPort refcount should be done behind lock before taking off the element. [ 2733.016907] general protection fault: 0000 [#1] SMP NOPTI [ 2733.016908] qla2xxx [0000:22:00.1]-7088:27: VP[4] deleted. [ 2733.016912] CPU: 22 PID: 23481 Comm: qla2xxx_15_dpc Kdump: loaded Tainted: G OE KX 5.3.18-47-default #1 SLE15-SP3 [ 2733.016914] Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.1.4 02/17/2021 [ 2733.016929] RIP: 0010:qla2x00_abort_isp+0x90/0x850 [qla2xxx] [ 2733.016933] RSP: 0018:ffffb9cfc91efe98 EFLAGS: 00010087 [ 2733.016935] RAX: 0000000000000292 RBX: dead000000000100 RCX: 0000000000000000 [ 2733.016936] RDX: 0000000000000001 RSI: ffff944bfeb99558 RDI: ffff944bfc4b4488 [ 2733.016937] RBP: ffff944bfc4b2868 R08: 00000000000187a2 R09: 0000000000000001 [ 2733.016937] R10: ffffb9cfc91efcc8 R11: 0000000000000001 R12: ffff944bfc4b4000 [ 2733.016938] R13: ffff944bfc4b4870 R14: ffff944bfc4b4488 R15: ffff944bda895c80 [ 2733.016939] FS: 0000000000000000(0000) GS:ffff944bfeb80000(0000) knlGS:0000000000000000 [ 2733.016940] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2733.016940] CR2: 00007fc173e74458 CR3: 0000001ff57de000 CR4: 0000000000350ee0 [ 2733.016941] Call Trace: [ 2733.016951] qla2xxx_pci_error_detected+0x190/0x190 [qla2xxx] [ 2733.016957] qla2x00_do_dpc+0x560/0xa10 [qla2xxx] [ 2733.016962] kthread+0x10d/0x130 [ 2733.016963] kthread_park+0xa0/0xa0 [ 2733.016966] ret_from_fork+0x22/0x40 Link: https://lore.kernel.org/r/20210810043720.1137-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Fix port type infoQuinn Tran
Over time, fcport->port_type became a flag field. The flags within this field were not defined properly. This caused external tools to read wrong info. Link: https://lore.kernel.org/r/20210810043720.1137-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Add debug print of 64G link speedQuinn Tran
Add debug print of 64G link speed. Link: https://lore.kernel.org/r/20210810043720.1137-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Show OS name and version in FDMI-1Arun Easi
To be consistent with other OS drivers, register OS name and version in FDMI-1 fabric registration. Link: https://lore.kernel.org/r/20210810043720.1137-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Changes to support FCP2 TargetSaurav Kashyap
Add changes to support FCP2 Target. Link: https://lore.kernel.org/r/20210810043720.1137-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Adjust request/response queue size for 28xxQuinn Tran
Adjust request/respond queue size for 28xx to match 27xx adapter. Link: https://lore.kernel.org/r/20210810043720.1137-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Add host attribute to trigger MPI hangArun Easi
Add a mechanism to trigger MPI pause for debugging purposes. Link: https://lore.kernel.org/r/20210810043720.1137-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-39-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-05scsi: qla2xxx: Remove redundant initialization of variable num_cntColin Ian King
The variable num_cnt is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Link: https://lore.kernel.org/r/20210804131344.112635-1-colin.king@canonical.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unused value")
2021-08-05scsi: qla2xxx: Fix use after free in debug codeDan Carpenter
The sp->free(sp); call frees "sp" and then the debug code dereferences it on the next line. Swap the order. Link: https://lore.kernel.org/r/20210803155625.GA22735@kili Fixes: 84318a9f01ce ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els") Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-30scsi: qla2xxx: Fix spelling mistakes "allloc" -> "alloc"Colin Ian King
There are two spelling mistakes with the same triple l in alloc, one in a comment, the other in a ql_dbg() debug message. Fix them. Link: https://lore.kernel.org/r/20210729082413.4761-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: Update version to 10.02.00.107-kNilesh Javali
Link: https://lore.kernel.org/r/20210624052606.21613-12-njavali@marvell.com Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Increment command and completion countsQuinn Tran
Increment the command and the completion counts. Link: https://lore.kernel.org/r/20210624052606.21613-11-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add encryption to I/O pathQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. After the completion of PLOGI, both sides have authenticated and PRLI completed, encrypted I/Os are allowed to proceed. - Use new firmware API to encrypt traffic on the wire - Add driver parameter to enable|disable EDIF feature # modprobe qla2xxx ql2xsecenable=1 Link: https://lore.kernel.org/r/20210624052606.21613-10-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add doorbell notification for appQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. During runtime, driver and authentication application need to stay in sync in terms of: Session being down|up, arrival of new authentication message (AUTH ELS) and SADB update completion. These events are queued up as doorbell to the authentication application. Application would read this doorbell on regular basis to stay up to date. Each SCSI host would have a separate doorbell queue. The doorbell interface can daisy chain a list of events for each read. Each event contains an event code + hint to help application steer the next course of action. Link: https://lore.kernel.org/r/20210624052606.21613-9-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add detection of secure deviceQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. There is no FC switch scan service that can indicate whether a device is secure or non-secure. In order to detect whether the remote port supports encrypted operation, driver must first do a PLOGI with the remote device. On completion of the PLOGI, driver will query firmware to see if the device supports secure login. To do that, driver + firmware must advertise the security bit via PLOGI's service parameter. The remote device shall respond using the same service parameter whether it supports it or not. Link: https://lore.kernel.org/r/20210624052606.21613-8-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add authentication pass + fail bsgsQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. On completion of the authentication process, the authentication application will notify driver on whether it is successful or not. In case of success, application will use the QL_VND_SC_AUTH_OK BSG call to tell driver to proceed to the PRLI phase. In case of failure, application will use the QL_VND_SC_AUTH_FAIL bsg call to tell driver to tear down the connection and retry. In the case where an existing session is active, the re-key process can fail. The session tear down ensures data is not further compromised. Link: https://lore.kernel.org/r/20210624052606.21613-7-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add key updateQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. As part of the authentication process, the authentication application will generate a SADB entry (Security Association/SA, key, SPI value, etc). This SADB is then passed to driver to be programmed into hardware. There will be a pair of SADB's (Tx and Rx) for each connection. After some period, the application can choose to change the key. At that time, a new set of SADB pair is given to driver. The old set of SADB will be deleted. Add a new bsg call (QL_VND_SC_SA_UPDATE) to allow application to allow adding or deleting SADB entries. Driver will not keep the key in memory. It will pass it to HW. It is assumed that application will assign a unique SPI value to this SADB (SA + key). Driver + hardware will assign a handle to track this unique SPI/SADB. Link: https://lore.kernel.org/r/20210624052606.21613-6-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add extraction of auth_els from the wireQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. Once authentication messages sent from a remote device have arrived, each message is extracted and placed in a buffer for application to retrieve. The FC frame header will be stripped, leaving behind the AUTH ELS payload. It is up to the application to strip the AUTH ELS header to get to the actual authentication message. Link: https://lore.kernel.org/r/20210624052606.21613-5-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add send, receive, and accept for auth_elsQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. Add the ability for authentication application to send and retrieve messages as part of the authentication process via existing FC_BSG_HST_ELS_NOLOGIN BSG interface. To send a message, application is expected to format the data in the AUTH ELS format. Refer to FC-SP2 for details. If a message was received, application is required to reply with either a LS_ACC or LS_RJT complete the exchange using the same interface. Otherwise, remote device will treat it as a timeout. Link: https://lore.kernel.org/r/20210624052606.21613-4-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add getfcinfo and statistic bsgsQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. Add two new BSG calls: - QL_VND_SC_GET_FCINFO: Application can from time to time request a list of all FC ports or a single device that supports secure connection. If driver sees a new or old device has logged into the switch, this call is used to check for the WWPN. - QL_VND_SC_GET_STATS: Application request for various statistics for each FC port. Link: https://lore.kernel.org/r/20210624052606.21613-3-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add start + stop bsgsQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. Add two new BSG calls: - QL_VND_SC_APP_START: Application will announce its presence to driver with this call. Driver will restart all connections to see if remote device supports security or not. - QL_VND_SC_APP_STOP: Application announces it is in the process of exiting. Driver will restart all connections to revert back to non-secure. Provided the remote device is willing to allow a non-secure connection. Link: https://lore.kernel.org/r/20210624052606.21613-2-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: Remove unused variable 'status'Bill Wendling
Fix the clang build warning: drivers/scsi/qla2xxx/qla_nx.c:2209:6: error: variable 'status' set but not used [-Werror,-Wunused-but-set-variable] int status = 0; Link: https://lore.kernel.org/r/20210726201924.3202278-4-morbo@google.com Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Bill Wendling <morbo@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-20scsi: qla2xxx: Use the proper SCSI midlayer interfaces for PIMartin K. Petersen
Use the SCSI midlayer interfaces to query protection interval, reference tag, and per-command DIX flags. Link: https://lore.kernel.org/r/20210609033929.3815-4-martin.petersen@oracle.com Reviewed-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Message-Id: <20210609033929.3815-4-martin.petersen@oracle.com>
2021-07-18scsi: qla2xxx: Remove redundant continue statement in a for-loopColin Ian King
The continue statement at the end of the for-loop is redundant, remove it. Link: https://lore.kernel.org/r/20210702131542.19880-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Continue has no effect")
2021-07-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes and clean ups in the core and various drivers. The only core change in behaviour is the I/O retry for spinup notify, but that shouldn't impact anything other than the failing case" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits) scsi: virtio_scsi: Add validation for residual bytes from response scsi: ipr: System crashes when seeing type 20 error scsi: core: Retry I/O for Notify (Enable Spinup) Required error scsi: mpi3mr: Fix warnings reported by smatch scsi: qedf: Add check to synchronize abort and flush scsi: MAINTAINERS: Add mpi3mr driver maintainers scsi: libfc: Fix array index out of bound exception scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro scsi: qedf: Use DEVICE_ATTR_RO() macro scsi: qedi: Use DEVICE_ATTR_RO() macro scsi: message: mptfc: Switch from pci_ to dma_ API scsi: be2iscsi: Fix some missing space in some messages scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe() scsi: ufs: Fix build warning without CONFIG_PM scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment scsi: qla2xxx: Add heartbeat check scsi: virtio_scsi: Do not overwrite SCSI status scsi: libsas: Add LUN number check in .slave_alloc callback scsi: core: Inline scsi_mq_alloc_queue() ...
2021-07-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, ibmvfc, megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with elx and mpi3mr being new drivers. The major core change is a rework to drop the status byte handling macros and the old bit shifted definitions and the rest of the updates are minor fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits) scsi: aha1740: Avoid over-read of sense buffer scsi: arcmsr: Avoid over-read of sense buffer scsi: ips: Avoid over-read of sense buffer scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe() scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame() scsi: elx: libefc: Fix less than zero comparison of a unsigned int scsi: elx: efct: Fix pointer error checking in debugfs init scsi: elx: efct: Fix is_originator return code type scsi: elx: efct: Fix link error for _bad_cmpxchg scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel() scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session() scsi: elx: efct: Fix error handling in efct_hw_init() scsi: elx: efct: Remove redundant initialization of variable lun scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected" scsi: lpfc: Fix build error in lpfc_scsi.c scsi: target: iscsi: Remove redundant continue statement scsi: qla4xxx: Remove redundant continue statement scsi: ppa: Switch to use module_parport_driver() scsi: imm: Switch to use module_parport_driver() scsi: mpt3sas: Fix error return value in _scsih_expander_add() ...
2021-06-22scsi: qla2xxx: Add heartbeat checkQuinn Tran
Use "no-op" mailbox command to check if the adapter firmware is still responsive. Link: https://lore.kernel.org/r/20210619052427.6440-1-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15scsi: qla2xxx: Use list_move_tail() instead of list_del()/list_add_tail()Baokun Li
Using list_move_tail() instead of list_del() + list_add_tail(). Link: https://lore.kernel.org/r/20210609072321.1356896-1-libaokun1@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15scsi: qla2xxx: Remove duplicate declarationsShaokun Zhang
qla2x00_post_uevent_work(), qla2x00_free_fcport() and ql2xexlogins are declared multiple times. Remove the duplicates. Link: https://lore.kernel.org/r/1621843402-34828-1-git-send-email-zhangshaokun@hisilicon.com Cc: Nilesh Javali <njavali@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-10-03 14:08:43 +0000