| Age | Commit message (Collapse) | Author |
|---|
|
Implement ->map queues and use the block layer blk_mq_pci_map_queues
helper for mapping queues to CPUs.
With this mapping minimum 10%+ increase in performance is noticed.
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add 22.5 Gbps link rate definitions.
Link: https://lore.kernel.org/r/20211018070611.26428-1-sreekanth.reddy@broadcom.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the memcpy_{from,to}_bvec() helpers instead of open coding them.
Link: https://lore.kernel.org/r/20211018060802.1815982-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Implement the ->restore() PM operation and set the link to off, which will
force a full reset and restore. This ensures that Host Performance Booster
is reset after suspend-to-disk.
The Host Performance Booster feature caches logical-to-physical mapping
information in the host memory. After suspend-to-disk, such information is
not valid, so a full reset and restore is needed.
A full reset and restore is done if the SPM level is 5 or 6, but not for
other SPM levels, so this change fixes those cases.
A full reset and restore also restores base address registers, so that code
is removed.
Link: https://lore.kernel.org/r/20211018151004.284200-2-adrian.hunter@intel.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sgl is freed in the target stack in target_release_cmd_kref() before
calling qlt_free_cmd() but there is an unmap of sgl in qlt_free_cmd() that
causes a panic if sgl is not yet DMA unmapped:
NIP dma_direct_unmap_sg+0xdc/0x180
LR dma_direct_unmap_sg+0xc8/0x180
Call Trace:
ql_dbg_prefix+0x68/0xc0 [qla2xxx] (unreliable)
dma_unmap_sg_attrs+0x54/0xf0
qlt_unmap_sg.part.19+0x54/0x1c0 [qla2xxx]
qlt_free_cmd+0x124/0x1d0 [qla2xxx]
tcm_qla2xxx_release_cmd+0x4c/0xa0 [tcm_qla2xxx]
target_put_sess_cmd+0x198/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_free+0x6c/0x90 [tcm_qla2xxx]
The sgl may be left unmapped in error cases of response sending. For
instance, qlt_rdy_to_xfer() maps sgl and exits when session is being
deleted keeping the sgl mapped.
This patch removes use-after-free of the sgl and ensures that the sgl is
unmapped for any command that was not sent to firmware.
Link: https://lore.kernel.org/r/20211018122650.11846-1-d.bogdanov@yadro.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of
qla2x00_process_els()"), intended to change:
bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN
to:
bsg_job->request->msgcode != FC_BSG_RPT_ELS
but changed it to:
bsg_job->request->msgcode == FC_BSG_RPT_ELS
instead.
Change the == to a != to avoid leaking the fcport structure or freeing
unallocated memory.
Link: https://lore.kernel.org/r/20211012191834.90306-2-jgu@purestorage.com
Fixes: 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Joy Gu <jgu@purestorage.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver probing function should return < 0 for failure, otherwise
kernel will treat value > 0 as success.
Link: https://lore.kernel.org/r/1634522181-31166-1-git-send-email-zheyuma97@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We never checked for errors on add_disk() as this function returned
void. Now that this is fixed, use the shiny new error handling.
Just put the cdrom kref and have the unwinding be done by
sr_kref_release().
Link: https://lore.kernel.org/r/20211015233028.2167651-3-mcgrof@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We never checked for errors on add_disk() as this function returned
void. Now that this is fixed, use the shiny new error handling.
As with the error handling for device_add() we follow the same logic and
just put the device so that cleanup is done via the scsi_disk_release().
Link: https://lore.kernel.org/r/20211015233028.2167651-2-mcgrof@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the location of delay for ref-clk gating and ungating in
ufs_mtk_setup_ref_clk().
Link: https://lore.kernel.org/r/20211016005802.7729-4-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add proper header for using sched_clock().
Link: https://lore.kernel.org/r/20211016005802.7729-3-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce default delay time for gating or ungating reference clock instead
of ambiguous magic numbers.
The defined value is suitable for all current MediaTek UFS platforms.
Link: https://lore.kernel.org/r/20211016005802.7729-2-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The following issue was observed running syzkaller:
BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline]
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815
CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe4/0x14a lib/dump_stack.c:118
print_address_description+0x73/0x280 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:352 [inline]
kasan_report+0x272/0x370 mm/kasan/report.c:410
memcpy+0x1f/0x50 mm/kasan/kasan.c:302
memcpy include/linux/string.h:377 [inline]
sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021
resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772
schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429
scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835
scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896
scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034
__blk_run_queue_uncond block/blk-core.c:464 [inline]
__blk_run_queue+0x1a4/0x380 block/blk-core.c:484
blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78
sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847
sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716
sg_write+0x64/0xa0 drivers/scsi/sg.c:622
__vfs_write+0xed/0x690 fs/read_write.c:485
kill_bdev:block_device:00000000e138492c
vfs_write+0x184/0x4c0 fs/read_write.c:549
ksys_write+0x107/0x240 fs/read_write.c:599
do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
We get 'alen' from command its type is int. If userspace passes a large
length we will get a negative 'alen'.
Switch n, alen, and rlen to u32.
Link: https://lore.kernel.org/r/20211013033913.2551004-3-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The following warning was observed running syzkaller:
[ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in;
[ 3813.830724] program syz-executor not setting count and/or reply_len properly
[ 3813.836956] ==================================================================
[ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0
[ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549
[ 3813.846612] Call Trace:
[ 3813.846995] dump_stack+0x108/0x15f
[ 3813.847524] print_address_description+0xa5/0x372
[ 3813.848243] kasan_report.cold+0x236/0x2a8
[ 3813.849439] check_memory_region+0x240/0x270
[ 3813.850094] memcpy+0x30/0x80
[ 3813.850553] sg_copy_buffer+0x157/0x1e0
[ 3813.853032] sg_copy_from_buffer+0x13/0x20
[ 3813.853660] fill_from_dev_buffer+0x135/0x370
[ 3813.854329] resp_readcap16+0x1ac/0x280
[ 3813.856917] schedule_resp+0x41f/0x1630
[ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0
[ 3813.862699] scsi_dispatch_cmd+0x330/0x950
[ 3813.863329] scsi_request_fn+0xd8e/0x1710
[ 3813.863946] __blk_run_queue+0x10b/0x230
[ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400
[ 3813.865220] sg_common_write.isra.0+0xe61/0x2420
[ 3813.871637] sg_write+0x6c8/0xef0
[ 3813.878853] __vfs_write+0xe4/0x800
[ 3813.883487] vfs_write+0x17b/0x530
[ 3813.884008] ksys_write+0x103/0x270
[ 3813.886268] __x64_sys_write+0x77/0xc0
[ 3813.886841] do_syscall_64+0x106/0x360
[ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9
This issue can be reproduced with the following syzkaller log:
r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0)
r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00')
open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000)
r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782)
write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126)
In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass
the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This
leads to OOB in sg_copy_buffer().
To solve this issue, define alloc_len as u32.
Link: https://lore.kernel.org/r/20211013033913.2551004-2-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The variable retval is being initialized with a value that is never read,
it is being updated immediately afterwards. The assignment is redundant and
can be removed.
Link: https://lore.kernel.org/r/20211013182834.137410-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
|
|
'netdev->priv_flags & IFF_BONDING && netdev->flags & IFF_MASTER' is defined
as netif_is_bond_master() in netdevice.h. Replace it to clean up code.
Link: https://lore.kernel.org/r/20211015142006.540773-1-shjy180909@gmail.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: MichelleJin <shjy180909@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
initialize_event_pool()
During driver probe we allocate a dma region for our event pool.
Currently, zero is passed for the gfp_flags parameter. Driver probe
callbacks are run in process context and we hold no locks so we can sleep
here if necessary.
Fix by passing GFP_KERNEL explicitly to dma_alloc_coherent().
Link: https://lore.kernel.org/r/1547089149-20577-1-git-send-email-tyreld@linux.vnet.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
I intended to move from snprintf() to scnprintf() in the previous patch but
I messed up and did not do that. The result of my bug is that it this
function could trigger a WARN() if the buffer is too large.
Link: https://lore.kernel.org/r/20211013083005.GA8592@kili
Fixes: 76a4f7cc5973 ("scsi: mpi3mr: Clean up mpi3mr_print_ioc_info()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For SD cardreaders it is extremely common not to have a cache.
Consequently, the following messages do not point to a real error one could
try to fix but rather describe how the disk works:
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
Print these messages as warnings instead of errors.
Link: https://lore.kernel.org/r/20211013075050.3870354-1-martin.kepplinger@puri.sm
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct io_comp_batch contains a list head and a completion handler, which
will allow completions to more effciently completed batches of IO.
For now, no functional changes in this patch, we just define the
io_comp_batch structure and add the argument to the file_operations iopoll
handler.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The 0-element arrays that are used as memcpy() destinations are actually
flexible arrays. Adjust their structures accordingly so that memcpy()
can better reason able their destination size (i.e. they need to be seen
as "unknown" length rather than "zero").
In some cases, use of the DECLARE_FLEX_ARRAY() helper is needed when a
flexible array is alone in a struct.
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
Cc: Ross Schmidt <ross.schm.dev@gmail.com>
Cc: Marco Cesati <marcocesati@gmail.com>
Cc: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-staging@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In support of enabling -Warray-bounds and -Wzero-length-bounds and
correctly handling run-time memcpy() bounds checking, replace all
open-coded flexible arrays (i.e. 0-element arrays) in unions with the
DECLARE_FLEX_ARRAY() helper macro.
This fixes warnings such as:
fs/hpfs/anode.c: In function 'hpfs_add_sector_to_btree':
fs/hpfs/anode.c:209:27: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct bplus_internal_node[0]' [-Wzero-length-bounds]
209 | anode->btree.u.internal[0].down = cpu_to_le32(a);
| ~~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from fs/hpfs/hpfs_fn.h:26,
from fs/hpfs/anode.c:10:
fs/hpfs/hpfs.h:412:32: note: while referencing 'internal'
412 | struct bplus_internal_node internal[0]; /* (internal) 2-word entries giving
| ^~~~~~~~
drivers/net/can/usb/etas_es58x/es58x_fd.c: In function 'es58x_fd_tx_can_msg':
drivers/net/can/usb/etas_es58x/es58x_fd.c:360:35: warning: array subscript 65535 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[]'} [-Wzero-length-bounds]
360 | tx_can_msg = (typeof(tx_can_msg))&es58x_fd_urb_cmd->raw_msg[msg_len];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/can/usb/etas_es58x/es58x_core.h:22,
from drivers/net/can/usb/etas_es58x/es58x_fd.c:17:
drivers/net/can/usb/etas_es58x/es58x_fd.h:231:6: note: while referencing 'raw_msg'
231 | u8 raw_msg[0];
| ^~~~~~~
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Cc: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Cc: Rohit Maheshwari <rohitm@chelsio.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Mordechay Goodstein <mordechay.goodstein@intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com>
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: linux-crypto@vger.kernel.org
Cc: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: bpf@vger.kernel.org
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # drivers/net/can/usb/etas_es58x/*
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Unlike the RWF_HIPRI userspace ABI which is intentionally kept vague,
the bio flag is specific to the polling implementation, so rename and
document it properly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split the integrity/metadata handling definitions out into a new header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Drop various include not actually used in genhd.h itself, and
move the remaning includes closer together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Drop various include not actually used in blkdev.h itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Except for the features passed to blk_queue_required_elevator_features,
elevator.h is only needed internally to the block layer. Move the
ELEVATOR_F_* definitions to blkdev.h, and the move elevator.h to
block/, dropping all the spurious includes outside of that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After commit ed4246d37f3b ("scsi: sd: REQUEST SENSE for
BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()"), the following crash
was observed.
static int sd_resume_runtime(struct device *dev)
{
struct scsi_disk *sdkp = dev_get_drvdata(dev);
struct scsi_device *sdp = sdkp->device; // sdkp == NULL and crash
if (sdp->ignore_media_change) {
...
}
It is possible for sdkp to be NULL in sd_resume_runtime(). To fix this
crash, follow sd_resume() to test if sdkp is NULL before dereferencing it.
Crash:
[ 4.695171][ T151] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 4.696591][ T151] Mem abort info:
[ 4.697919][ T151] ESR = 0x96000005
[ 4.699692][ T151] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.701990][ T151] SET = 0, FnV = 0
[ 4.702513][ T151] EA = 0, S1PTW = 0
[ 4.704431][ T151] FSC = 0x05: level 1 translation fault
[ 4.705254][ T151] Data abort info:
[ 4.705806][ T151] ISV = 0, ISS = 0x00000005
[ 4.706484][ T151] CM = 0, WnR = 0
[ 4.707048][ T151] [0000000000000008] user address but active_mm is swapper
[ 4.710577][ T151] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 4.832361][ T151] Kernel Offset: 0x12acc80000 from 0xffffffc010000000
[ 4.833254][ T151] PHYS_OFFSET: 0x40000000
[ 4.833814][ T151] pstate: 80400005 (Nzcv daif +PAN -UAO)
[ 4.834546][ T151] pc : sd_resume_runtime+0x20/0x14c
[ 4.835227][ T151] lr : scsi_runtime_resume+0x84/0xe4
[ 4.835916][ T151] sp : ffffffc0110db8d0
[ 4.836450][ T151] x29: ffffffc0110db8d0 x28: 0000000000000001
[ 4.837258][ T151] x27: ffffff80c0bd1ac0 x26: ffffff80c0bd1ad0
[ 4.838063][ T151] x25: ffffff80cea7e448 x24: ffffffd2bf961000
[ 4.838867][ T151] x23: ffffffd2be69f838 x22: ffffffd2bd9dfb4c
[ 4.839670][ T151] x21: 0000000000000000 x20: ffffff80cea7e000
[ 4.840474][ T151] x19: ffffff80cea7e260 x18: ffffffc0110dd078
[ 4.841277][ T151] x17: 00000000658783d9 x16: 0000000051469dac
[ 4.842081][ T151] x15: 00000000b87f6327 x14: 0000000068fd680d
[ 4.842885][ T151] x13: ffffff80c0bd2470 x12: ffffffd2bfa7f5f0
[ 4.843688][ T151] x11: 0000000000000078 x10: 0000000000000001
[ 4.844492][ T151] x9 : 00000000000000b1 x8 : ffffffd2be69f88c
[ 4.845295][ T151] x7 : ffffffd2bd9e0e5c x6 : 0000000000000000
[ 4.846099][ T151] x5 : 0000000000000080 x4 : 0000000000000001
[ 4.846902][ T151] x3 : 68fd680dfe4ebe5e x2 : 0000000000000003
[ 4.847706][ T151] x1 : ffffffd2bf7f9380 x0 : ffffff80cea7e260
[ 4.856708][ T151] die+0x16c/0x59c
[ 4.857191][ T151] __do_kernel_fault+0x1e8/0x210
[ 4.857833][ T151] do_page_fault+0xa4/0x654
[ 4.858418][ T151] do_translation_fault+0x6c/0x1b0
[ 4.859083][ T151] do_mem_abort+0x68/0x10c
[ 4.859655][ T151] el1_abort+0x40/0x64
[ 4.860182][ T151] el1h_64_sync_handler+0x54/0x88
[ 4.860834][ T151] el1h_64_sync+0x7c/0x80
[ 4.861395][ T151] sd_resume_runtime+0x20/0x14c
[ 4.862025][ T151] scsi_runtime_resume+0x84/0xe4
[ 4.862667][ T151] __rpm_callback+0x1f4/0x8cc
[ 4.863275][ T151] rpm_resume+0x7e8/0xaa4
[ 4.863836][ T151] __pm_runtime_resume+0xa0/0x110
[ 4.864489][ T151] sd_probe+0x30/0x428
[ 4.865016][ T151] really_probe+0x14c/0x500
[ 4.865602][ T151] __driver_probe_device+0xb4/0x18c
[ 4.866278][ T151] driver_probe_device+0x60/0x2c4
[ 4.866931][ T151] __device_attach_driver+0x228/0x2bc
[ 4.867630][ T151] __device_attach_async_helper+0x154/0x21c
[ 4.868398][ T151] async_run_entry_fn+0x5c/0x1c4
[ 4.869038][ T151] process_one_work+0x3ac/0x590
[ 4.869670][ T151] worker_thread+0x320/0x758
[ 4.870265][ T151] kthread+0x2e8/0x35c
[ 4.870792][ T151] ret_from_fork+0x10/0x20
Link: https://lore.kernel.org/r/20211015074654.19615-1-miles.chen@mediatek.com
Fixes: ed4246d37f3b ("scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()")
Cc: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When scanning devices through the 'scan' attribute in sysfs, the user will
observe duplicate device entries in lsscsi command output.
Set the shost's max_channel to zero to avoid this.
Link: https://lore.kernel.org/r/20211014055425.30719-1-sreekanth.reddy@broadcom.com
Fixes: 824a156633df ("scsi: mpi3mr: Base driver code")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
All SCSI drivers have been converted to use shost_groups and sdev_groups
instead of shost_attrs or sdev_attrs. Hence remove shost_attrs and
sdev_attrs. Additionally, remove the 'lld_attr_group' members and also
the scsi_convert_dev_attrs() function.
Link: https://lore.kernel.org/r/20211012233558.4066756-47-bvanassche@acm.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-44-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-43-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-42-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Additionally, remove qla_insert_tgt_attrs() and replace it with
qla_host_attr_is_visible().
Link: https://lore.kernel.org/r/20211012233558.4066756-41-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since there is no definition for the qla2x00_host_attrs_dm array, remove
its declaration.
Link: https://lore.kernel.org/r/20211012233558.4066756-40-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-39-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-38-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-37-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-36-bvanassche@acm.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-35-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-34-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-33-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-32-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-31-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-30-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-29-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-29-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-28-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-27-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-26-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
